Jib crane

Abus C2-16183158-0010

Condition: new, Year of construction: 2026, Comparable to: e.g. Emmegi Kodpfoyinu Hex Aamsnc Double mitre saw for steel Cutting length: 5,000 mm Equipped with 7 NC axes for length positioning, outward and inward saw blade inclination, saw blade feed, and saw motor speed control Torsion-free welded construction with longitudinal linear guideways 2 x saw motors, each 4.5 kW Saw blade speed: 0–250 rpm Saw feed motorized from rear to front Feed speed infinitely adjustable Motorized angle adjustment between 135° and 45° Suitable for HSS circular saw blades, Ø 400 mm Pneumatic protective covers Water cooling with pump and coolant tank Left saw unit fixed to the base frame, right unit motorized and traversable Positioning accuracy: ± 0.15 mm Max. traverse speed: 25 m/min Length positioning compensates for saw angles and profile height Each saw head fitted with three horizontal and vertical profile clamps; in the event of pressure loss, the horizontal cylinders remain clamped Pneumatically swivelable material support between the saw heads 15” touchscreen Single cut processing Processing of cutting lists Creation of cutting lists via keyboard Import of cutting lists via USB flash drive or network interface Corner cutting Overlength cutting Short cuts from 5 mm cutting length Crosscuts Available options: Micro-spraying unit Saw head inward inclination increased to 150° Label printer Barcode scanner Additional network interface and teleservice agreement

Condition: used, Year of construction: 2015, Technical details: lifting capacity: 0,8 t span width: 4375 mm Arm length: 4375 bis Kranhaken mm height lower edge cantilever arm: 3660 mm cantilever arm length from center column: 4650 mm lifting height max. hook position: 3300 mm column diameter: 410 mm rotation: momentan ca. 100° begrenzt ° total power requirement: 1,8 kW The pillar-mounted slewing jib crane consists of the following main groups: Boom Hoist: Vetter chain hoist type SICH6BF, lifting height 2000mm, hook Ø 43mm with rope safety device; load chain type 7 x 20 double chain Support column H: 4000mm with flange Ø 610mm Crane control via pendant control Beam Manual operation (slewing) Chain hoist on beam * Knodpsu Nvmqofx Aamjc

Condition: used, functionality: fully functional, Usable cutting length: 4000 mm Blade diameter: 450 mm Kedpezcf Rxefx Aamonc Pneumatic tilting of the cutting heads: 90-45/20°

Year of construction: 1995, condition: good (used), DEMAG Electric Hoist DKUN 5-500-K-V1F4 Type: Electric chain hoist Knodpfx Ajudv Tksamec Year: 1995 Chain: 3 meters Three-phase 380V Capacity: 1.000Kg 2 speeds (12,5m/min. - 6,2m/min.) 1.7Kw

Condition: excellent (used), Year of construction: 2013, Column jib crane, overhead crane, workstation crane Knedpfjz A R H Iox Aamoc -Manufacturer: Abus, Column jib crane type LS -Documentation: Crane inspection log available -Base plate: 600 x 600 mm -Load capacity: 500 kg -Chain hoist: Abus type GM 2 500.4-2 -2x lifting speed: 4.0/1.0 m/min -Reach: 3000 mm -Total height: 4180 mm -Hook height: 3100 mm -Swivel range: 270° -Transport dimensions: 4180/800/H710 mm -Weight: 428 kg

Condition: new, DescriptionWork table made of heavily ribbed gray cast iron and base frame made of welded steel guarantee torsional rigidity and vibration-free operationUnique in this performance class: Format sliding carriage made of anodized aluminum for highest cutting precisionCutting plane directly on the saw bladeSwiveling saw blade from 90° - 45Trimming frame with aluminum crosscut fence and adjustable fence jaw for panels and large workpiecesMilling protection hood for profilingTwo independent motors for each working unitTECHNICAL DATADimensions and weightsWeight (net) approx. 190 kgSuction connectionSuction port diameter 120 mmSuction port diameter saw blade guard 60 mmElectrical dataSupply voltage 400 VMains frequency 50 HzNominal operating mode drive motor S6Duty cycle drive motor 40Power of drive motor 2 x 1.8 kWSliding carriage and tableLength of sliding table 1140 mmFormat sliding carriage width 201 mmHeight of format sliding carriage 70 mmtable length 1040 mmtable width 224 mmMilling spindlespindle mandrel diameter 30 mmuseful length of spindle 75 mmspindle speeds 5000/7500 min?¹Milling tool diameter l diameter max. 160 mmtool diameter max. tenon milling 200 mmCircular saw unittrimming length 1200 mmCutting width with rip fence 700 mmMax. Trimming width to the left of the saw blade 1200 mmSaw blade inclination 90 - 45Max. Cutting height 90° 75 mmMax. cutting height Cutting height 45°60 mmMax. Saw blade projection 90° 67 mmMax. saw blade Saw blade projection 45°40 mmDiameter (main) saw blade 250 mmSpeed (main) saw blade 4000 min?¹EquipmentAnodized aluminum sliding carriageTrimming frame with angle-adjustable crosscut fence with a folding stop and degree scaleSaw parallel stopEccentric clampTable wideningTrimming fence with wooden fence jawsManual height adjustment of the spindleSaw blade height adjustment manualsaw blade tilt adjustment manual&nbsp, Knodpfxsvwfqws Aamsc

Condition: good (used), Crane remote control, radio receiver, receiver, crane radio remote control, radio control system, crane control, radio remote control, radio remote control, radio remote control, radio transmitter -Manufacturer: ABUS, radio remote control with transmitter and receiver for crane remote control -Type: ABURemote AR611 Kedsy Ndrvopfx Aamonc -Scope of delivery: as shown in the pictures, plug/connection cable -Dimensions: 570/510/H180 mm -Weight: 5.5 kg

Condition: used, Year of construction: 1981, arm length 3600 mm total column height ca 5500 mm weight max. in kg 1000 kg travel of hook 3000 mm height of hook ca. 4000 mm weight of the machine ca. 1,5 t Ksdpfx Asxtqwqoamsnc dimensions of the machine ca. 6,0 x 2,0 x 1,0 m Pillar Type Swivelling Crane - Electric chain hoist 1 SN Speed: 4.6 / 1.2 m/min - with trolley System is dismantled.

Condition: excellent (used), Year of construction: 2016, Electric scissor lift 7.8m Snorkel 3219E personal lift Snorkel personal lift, scissor lift, lifting basket for sale in excellent condition Knsdpfx Asm Harmsamoc make: Snorkel 3219E production year 2016/11 Electric scissor lift, lifting basket Working height: 7.8 m Platform height 5.8 m Platform length: 1700 m Platform width: 740 mm Platform extension: 0.91 m Basket capacity 250 kg People: 1-2 Battery charger: Yes operating hours: 58 Own weight: 1611 kg battery status: approx. 80% Tires: non-marking tires track width: 820mm Full length 1850 mm Overall width: 760/820 mm Total height: 2150 mm

Condition: used, Electric chain hoist, electric lifting mechanism, DEMAG crane, type DKUN 1-100 K V1 F4 Manufacturer's serial number: 61801899, Year of manufacture: 1997 Load capacity: 100 kg Hook travel: 3 meters Kjdpfxehtr Eyj Aamenc Main lifting speed: 8 m/min Fine lifting speed: 2 m/min Chain size: 3.6 x 10.6 mm Control pendant cable length: approx. 1.7 meters Power connection: 400 Volts, 50 Hz 1 load strand = 100 kg Weight: 16.5 kg Good condition