Used three-way tipper trailers for sale (155)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,200 kg, maximum load weight: 16,800 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, total length: 7,200 mm, total width: 2,550 mm, total height: 1,800 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Chassis, central axle, tipping trailer Steel welded construction, continuous tipping shaft at the rear with 100 mm ball bearing Type 210, then total weight technically 21,000 kg (special permit required) Gearbox support leg at the front Retractable rear support Iedpfxjzd Eynj Al Tsaw 2 chocks with holder Under-ride guard, steel Splash guards at the rear over the entire width (not in conjunction with forklift holder) Quarter panel fenders in front of and behind each axle 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable 1 pair of aluminum ramps, 3,440 mm long, 360 mm wide, load capacity per pair 8,000 kg (attachment rail for ramps at the rear) Coupling device for central axle trailer Drawbar with tested 50 mm tow hitch Axles + suspension BPW disc brake axles "Axle/chassis laser-aligned" reduces tire wear and fuel consumption Axle spacing 1810 mm (then 10 tons axle load technically) Air suspension Braking system 2-line compressed air brake system Color-coded line routing for easy maintenance. Spring brake parking brake 2 fail-safe coupling heads at the front, with connecting lines to the tractor unit, 24 Volt EBS, electronic braking system with EBS connector at the front, with connection cable, Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! with lift and lower valve Vehicle - driving stability system Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be correspondingly pre-equipped, no truck installation (no calibrated scale) Wheels and tires 435/50 R19.5", manufacturer's choice Tires with 164 K or J marking, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connection cable, 1 additional LED work light at the rear, switched via reversing light Hydraulics Three-way tipping mechanism, hydraulic multi-piston press with stroke limiter and safety cable, Low-pressure cylinder up to max. 170 bar, without throttle. If required, this can be retrofitted to the truck. (Truck with max. hydraulic delivery rate of 55 l/min) Operation hydraulically via truck PTO Hydraulic connection with SVK plug NW 10/3, incl. connection hose Tipping bridges Steel sheet floor Hardox 450, 4 mm thick, ball bearing at the rear, 100 mm diameter Side panel construction steel, side walls foldable and pivotally mounted with central locking at the bottom. Rear wall pivotable and as a 2-wing door (not foldable), with door holder and protective rubber on the side (not in conjunction with pivot or mesh grating attachment) Side wall retraction springs (not possible with foldable front wall) Platform width 2420 mm 5 pairs of lashing eyes in the floor, 5 tons each Painting Side panels/bridge painted in desired color Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,650 kg, maximum load weight: 9,850 kg, overall weight: 13,500 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 450 mm, total length: 6,900 mm, total width: 2,550 mm, total height: 1,680 mm, suspension: steel, tire size: 285/70 R19,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Central-Axle Tipping Trailer Chassis Welded steel construction, continuous tipping shaft at the rear with 80 mm ball-type tipping bearing Front transmission support leg Foldable rear support 2 wheel chocks with holders Steel underrun protection Rear mud flaps across the entire width Quarter-shell fenders Lockable storage compartment for ramps beneath the loading area 1 plastic toolbox, with insert shelf, W=620/H=360/D=440 mm, lockable with a padlock Note! The side panel touches the storage compartment when folded down. Lockable storage compartment for ramps beneath the cargo area Towing Equipment for Central-Axle Trailers Towing beam with certified 40 mm tow eye Towing beam height-adjustable via spindle, max. adjustment range 300 mm Axles + Suspension SAF drum brake axles “Laser-measured axles/chassis” reduces tire wear and fuel consumption Iasdpfszd D Scjx Al Tow Parabolic suspension with maintenance-free steel-rubber mounts and mechanical axle load compensation (rocker compensation) Wheels and Tires 285 / 70 R 19.5" as selected by the manufacturer Steel rims in factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 non-reversible coupling heads at the front, with connecting lines to the tractor unit, ABS and ALB, with ABS connector at the front, with connecting cable Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrical System 24 volts, multi-chamber lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-keeping lights 2 x 7-pin reverse-polarity-protected connectors at the front, with connecting cable Hydraulics Three-way tipping mechanism, hydraulic multi-piston press with stroke limiter and safety cable, low-pressure cylinder up to 170 bar max., without throttle valve. If necessary, this must be retrofitted to the truck. Hydraulic operation via truck PTO Hydraulic connection with SVK coupler, size 10/3, including connecting hose Tipping platforms Sturdy tipping platform with 4 mm steel plate floor, steel sidewall structure, continuous sidewalls that are fold-down and pivot-mounted with a central lock at the bottom. Rear corner stanchions are plug-in type. Rear wall folds down and is mounted on swing bearings, with a central lock at the bottom. Bed length approx. 5,000 mm; side walls with 6 hinges at the bottom. Sidewall retraction springs Bed width 2,420 mm 5 pairs of lashing eyes in the floor, 5 to each Operating Instructions The specified gross weight is technically possible; however, depending on the cargo, the gross weight may not be achieved while complying with the permissible axle, support, and fifth-wheel loads Country of Registration/Plates Country of registration: Germany With DEKRA approval and certification (pursuant to §13 EG-FGV) 24/7 Service Hotline Prepared for single-line license plate holder Contour marking with reflective strips per ECE R 048, white on the sides and red at the rear Paint finish Frame Hot-dip galvanized, including passivation “15-year warranty against through-corrosion” Sidewall/deck Painted in the color of your choice

Condition: new, empty load weight: 4,680 kg, maximum load weight: 13,320 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 5,750 mm, loading space width: 2,350 mm, loading space height: 600 mm, suspension: steel, tire size: 245/70 R17,5, Möslein Tandem Tipper Low Loader DTD 18 Schwebheim | 3-way tipper with slide-in ramps | Payload: 13,320 kg | Height-adjustable drawbar | ABS | Loading area length: 5.75 m, width: 2.35 m, side wall height: 0.60 m | Folding rear support legs | Tyres: 435/50 R19.5, BPW axles | Subject to errors, misprints, and prior sale. Ijdpsxztrmefx Al Toaw

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT21201012268, empty load weight: 3,240 kg, maximum load weight: 8,560 kg, overall weight: 11,800 kg, axle configuration: 2 axles, first registration: 05/2022, loading space length: 5,000 mm, loading space width: 2,420 mm, total length: 6,900 mm, total width: 2,550 mm, total height: 950 mm, suspension: steel, tire size: 235/75 R17,5", color: green, The images are archive images. The vehicle may be in use! Steel welded construction, continuous tipping shaft at the rear with 80 mm ball bearing, front gear support, foldable rear support, chocks with holder, steel underride protection, splash guards at the rear over the entire width (not in conjunction with forklift mount), quarter panel fenders, spare wheel, same brand as standard tires, steel rim, loose, plastic toolbox, with insert, w=620/h=360/d=440 mm, lockable with a padlock. (Lock not included) Note: The side board touches the storage box when folded down, lockable storage space for loading ramps below the loading area, pair of aluminum ramps 3,000 mm long, 360 mm wide, load capacity per pair 8,000 kg, (mounting rail for ramps at the rear) Drawbar with tested 40 mm towing eye, drawbar height-adjustable via spindle, max. adjustment range 300 mm BPW drum brake axles, axle/suspension laser-aligned to reduce tire wear and fuel consumption, parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (rocker compensation) 2-line compressed air braking system, color-coded line routing for easy servicing, hand-operated parking brake, integral air tank, ABS and ALB, with ABS connector at the front, with connection cable. Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS, Duomatic connection at the front, with connection line to the truck. 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red side marker lights at the rear, 1 x 15-pin connector at the front, with connection cable Three-way tipper, hydraulic multi-piston press with stroke limitation and safety cable, low-pressure cylinder up to max. 170 bar, without throttle. If required, this can be retrofitted on the truck. Hydraulic connection with SVK connector NW 10/3, incl. connection hose, operated hydraulically via truck auxiliary drive Stable tipping platform with 4 mm steel sheet floor, steel side board construction, continuous side walls, foldable and pivotally mounted with central locking at the bottom. Corner posts at the rear can be plugged in. Rear wall foldable and pivotally mounted, with central locking at the bottom, platform length approx. 5,000 mm, side walls with 6 hinges at the bottom. Side board retraction springs (not possible with split side walls), platform width 2420 mm, pair of lashing eyes in the floor, each 5 tons. Operating instructions: The specified total weight is technically possible, but depending on the load, the total weight may not be reached while complying with the permissible axle/support and drawbar loads. (Poor driving and tracking behavior possible due to incorrect load distribution). Country of registration: Germany, with Dekra approval and certificate (according to §13 EG - FGV), 24/7 service hotline, prepared for single-row license plate holder, contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear. Iaodpfx Alsk E Tdae Tsw The images are archive images. The vehicle may be in use!

Condition: used, first registration: 10/2017, next inspection (TÜV): 08/2025, total length: 7,000 mm, total width: 25,500 mm, total height: 22,000 mm, suspension: air, tire size: 385 / 65 R 22.5 / 14mm, wheelbase: 1,300 mm, front tire size: 385 / 65 R 22.5 / 14mm, operation weight: 19,000 kg,

Condition: new, maximum load weight: 2,425 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,620 mm, loading space width: 1,845 mm, loading space height: 400 mm, total width: 2,003 mm, total height: 1,251 mm, Year of construction: 2026, Three-way tipper – HTK 3500.37 with Furmann-BW (reinforced, very robust steel sideboards), electric and manual pump, timber rack pre-assembled, 8 tie-down rings. Other models, sizes, and designs are available or can be ordered and configured individually according to your wishes. Please do not hesitate to contact us – we will be happy to advise you personally! Our price – 8,700 € including 19% VAT, including 6.4% delivery surcharge, and vehicle documents! Description: The Humbaur HTK with Fuhrmann® profile is characterized by its robust sideboard made of galvanized steel sheet. This creates an extremely resistant surface. In addition, the HTK impresses with its quality and a manual pump, which you can replace with an electric hydraulic pump if required. This allows you to operate your HTK easily and independently in any situation. Technical data: Trailer type – Twin-axle Design – Furmann-BW – robust steel sideboards, hot-dip galvanized Rear tipper – 45° Three-way tipper – 45° Weight – 1,075 kg Iodpezdcn Defx Al Tjaw Total weight – 3,500 kg Payload – 2,425 kg Internal length – 3,620 mm Overall length – 5,143 mm Internal width – 1,845 mm Overall width – 2,003 mm Internal height – 400 mm Overall height – 1,251 mm Loading height – 760 mm Tires – 13 inches Equipment: Profile sideboards made of galvanized steel sheet, completely removable V-drawbar, hot-dip galvanized Tilting platform made of steel, manufactured in one piece Chassis, tilting platform, and sideboards hot-dip galvanized Manual pump, optional electric hydraulic pump from 3000 kg permissible total weight, electric and manual pump Humbaur multi-function lighting 13-pin plug and reversing light Rear flap, pivoting Tie-down rings mounted in the platform floor, tensile force 800 kg per tie-down ring Timber rack as preparation for aluminum timbers for easy retrofitting Support wheel

Condition: used, first registration: 03/2019, Equipment: ABS, IVECO Eurocargo 140E250 4x2 three-way tipper with HIAB crane and grapple + tandem trailer. Complete combination, immediately ready for use. Ideal for construction, gardening & landscaping, municipal services, or material transport. Both can also be purchased separately! Price on request. Vehicle data: Iveco Eurocargo 140E22 * Registered: 03/2019 Isdpfxey U Sdks Al Tsaw * 220 hp * 6-cylinder engine * Euro 6 * 4x2 * Manual transmission * Leaf spring suspension * Trailer coupling Body: Three-way tipper * HIAB 088 E-3 HIDUO loading crane * Crane located behind the cab * Hydraulic outriggers * Sideboards * Grapple Trailer: Möslein tandem trailer * Three-way tipper * Including ramps at the rear Equipment: Comfort seat * Radio * Sun visor * Tool box * Rotating beacon Condition: Vehicle and trailer in good condition * Crane functions perfectly * Immediately ready for use We are happy to provide further information.

Condition: used, empty load weight: 4,700 kg, maximum load weight: 13,300 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2011, next inspection (TÜV): 04/2027, suspension: other, color: blue, fuel type: gasoline, gearing type: other, driver cabin: other, emission class: none, * Loading platform dimensions * L = 5.00 m / W = 2.46 m * Side wall height = 0.90 m Isdpfoyuqw Iex Al Teaw * BWP axles * Sliding tarpaulin ... Air suspended, incl. VAT.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,600 kg, maximum load weight: 13,400 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,370 mm, loading space height: 900 mm, total length: 7,200 mm, total width: 2,550 mm, total height: 2,350 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. *Chassis – Tandem Three-Way Tipping Trailer Welded steel chassis construction Continuous rear tipping shaft with 100 mm spherical tipping bearing Two-speed landing gear at the front Foldable rear support legs Wheel chocks with holder Steel underrun protection Quarter mudguards in front of and behind each axle Anti-spray mud flaps behind each axle Lockable storage compartment for aluminium loading ramps beneath the platform 1 pair of aluminium loading ramps, approx. 3,600 mm long and 400 mm wide, load capacity 8,000 kg per pair Plastic toolbox with shelf insert, dimensions: 620 x 360 x 440 mm (W x H x D), lockable with padlock *Drawbar Drawbar with certified towing eye *Axles & Suspension BPW drum brake axles Air suspension with raise-and-lower valve *Wheels & Tyres 385/55 R 22.5 tyres, manufacturer's choice Steel rims, factory silver finish *Braking System Dual-line compressed air braking system Spring-loaded parking brake Two non-interchangeable coupling heads at the front with connecting lines to the towing vehicle EBS (Electronic Braking System) with front EBS connector and connecting cable *Electrical System 24 V electrical system Multi-chamber rear lights Iaodpfx Alezcyl Re Tow Yellow LED side marker lights 2 white front position lights 2 white/red rear outline marker lights 2 x 7-pin non-interchangeable front plugs with connecting cable *Hydraulic System Three-way tipping mechanism Hydraulic multi-stage tipping cylinder with stroke limiter and safety cable Hydraulic connection with SVK coupling NW 10/3, including connecting hose Hydraulic operation via truck PTO (power take-off) *Tipping Body 4 mm HB 400 steel floor Rear spherical tipping bearing, 100 mm diameter Steel side walls, drop-down and pendulum-mounted, with central locking at the bottom Front wall and side walls approx. 800 mm high Steel rear wall approx. 600 mm high, designed as a combination pendulum tailgate Side wall return springs 4 pairs of external lashing rings in the floor, each rated at 3 t 2 pairs of recessed floor lashing rings, each rated at 5 t *Registration & Compliance Registration country: Germany DEKRA inspection and certification included 24/7 service hotline Prepared for single-line licence plate holder Reflective contour markings according to ECE R048 (white on the sides, red at the rear) Rear warning plate according to ECE 70 *Paint Finish Chassis: galvanised or painted according to customer requirements Body and side walls: painted according to customer requirements Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,220 kg, maximum load weight: 8,580 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 450 mm, total length: 6,900 mm, total width: 2,550 mm, total height: 1,550 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized to meet individual customer needs. Chassis: Central axle tilting trailer Steel welded construction, continuous tilting shaft at the rear with 80 mm ball bearing Gear-supported front support leg Foldable rear support Iasdpfszcv Stjx Al Tew Wheel chocks with holder Underrun protection, steel Splash guards at the rear, covering the entire width (not in conjunction with forklift mount) Quarter panel fenders 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable (lock not included) Note! The side panel touches the storage box when folded down. Lockable storage space for loading ramps below the loading area Coupling device for central axle trailer Drawbar with tested 40 mm tow hitch Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles + Suspension GFA or BPW axles, at the manufacturer's choice, with tapered roller bearing and S-cam brake "Axle/chassis laser-aligned" - reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load equalization (linkage equalization) Wheels and Tires 235 / 75 R 17.5", manufacturer's choice Steel rims, factory silver Braking System 2-line compressed air braking system Color-coded line routing for easy servicing Handwheel-operated parking brake 24 Volt ABS and ALB, with ABS connector at the front, with connection cable Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! 2 fail-safe coupling heads at the front, with connection lines to the towing vehicle Electrical System 12 to 24 Volts, multi-chamber lights in LED, yellow LED side lighting, license plate lighting in LED 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole fail-safe connectors at the front, with connection cable Additional LED work lights at the rear, switched via reversing light Hydraulics Three-way tipper, hydraulic multi-piston cylinder with stroke limitation and safety cable Low-pressure cylinder up to max. 170 bar, without throttle. If required, this must be retrofitted on the truck (truck with max. hydraulic flow rate of 55 l/min) Hydraulic connection with SVK connector NW 10/3, including connection hose Operation hydraulically via truck auxiliary drive Tipping Platforms Stable tipping platform with 4 mm steel sheet base, side panel construction in steel, side walls continuous, foldable and pivotally mounted with central locking at the bottom. Rear corner posts pluggable. Rear wall foldable and pivotally mounted, with central locking at the bottom. Platform length approx. 5,000 mm, side walls with 6 hinges at the bottom. Side panel retraction springs Platform width 2420 mm 3 pairs of lashing eyes in the floor, each 5 tons Paint Finish Frame: Hot-dip galvanized including passivation "15-year guarantee against rust through" Side panels/platform: galvanized or painted according to customer requirements Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized to meet individual customer needs.

Condition: used, maximum load weight: 13,500 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 09/2010, loading space length: 5,100 mm, Ref. No.: B - 07 On behalf of customer Iaodpfxexvgamj Al Tow Schmitz Gotha * SKI 18 * Three-way tipper * 2-axle * SAF axles * Perm. total weight 18,000 kg * Good condition Trade-in possible Financing from 3.99% Subject to errors and prior sale! The information in this advertisement is non-binding descriptions and does not constitute guaranteed characteristics. The seller assumes no liability for typing or data transmission errors. Listed equipment must be checked separately. All information in the ads is non-binding! Delivery throughout Germany available upon request. Opening hours: Monday to Thursday from 9:00 am to 5:00 pm Friday from 9:00 am to 2:00 pm and by appointment!!!

Condition: used, first registration: 02/2019, Year of construction: 2019, SCHWARZMÜLLER Z2 2-Axle TANDEM 3-Side Tipper Trailer Steel / Alu Alcoa 19,000 kg ● 2 x BPW EAC HD - 9 t axles ● Full air suspension ● ABS / EBS ● Lift / lower system ● Duomatic connection ● Aluminium tipping body ● Steel floor with lashing rings ● Split, side aluminium drop sides ● Rear flap made of steel ● Total vehicle length: 7,150 x 2,550 x 2,600 mm (LxWxH) ● Internal body dimensions: 5,120 x 2,450 x 1,000 mm (LxWxH) ● Volume: 13 m³ ● Sliding tarpaulin ● Access platform Iaodpfx Aljx Nc Ebs Tow ● Tyres: 385/65 R 22.5 ● ALCOA Durabright rims ● Good tread! ● Unladen weight: 4,100 kg ● Gross weight: 19,000 kg - German-registered vehicle! - MOT / TÜV: NEW! Errors and prior sale excepted! = Further information = Please contact Joannis Arpantzanis or Kai Bühler for further information.

Condition: used, maximum load weight: 10,500 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 08/2015, next inspection (TÜV): 06/2026, loading space length: 5,000 mm, loading space width: 2,450 mm, loading space height: 900 mm, Year of construction: 2015, Equipment: ABS, Well-maintained tandem three-way tipper trailer Langendoef TK 18 / 13 with steel body Equipment: Aluminum rims Iodpsyxcrgjfx Al Tjaw Front access ladder Platform for operating the sliding tarpaulin Sliding tarpaulin Foldable underrun guard Height-adjustable drawbar Front support winch Spring assistance for opening the left sideboard Recessed lashing rings in the floor For any questions regarding equipment, please call. Tyre condition approximately 70% Errors and prior sale excepted!

Condition: used, maximum load weight: 13,291 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 01/2019, Equipment: ABS, * Schmitz tandem tipper with steel side panels type SGF-C2 (ZKI18-4.9) * Alcoa aluminium rims * Rotos SCB running gear system (disc brakes) * 2 LED reversing lights * 24-volt LED lighting system * LED rear fog lamp * A-sign for transport of waste materials * White front position lights * Platform with folding step * Rolling tarpaulin cover * Plastic single wheel mudguards Iasdpfoyrvntex Al Tew * Registration country: Germany * and much more * Subject to change, errors and prior sale

Condition: new, empty load weight: 880 kg, maximum load weight: 2,120 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 3,140 mm, loading space width: 1,750 mm, loading space height: 950 mm, total length: 4,500 mm, total width: 1,930 mm, total height: 1,860 mm, Year of construction: 2026, Humbaur three-way tipper with electric pump and lattice extension 600mm - HTK 3000.31 Our price: €8,200 incl. 19% VAT, 6.4% delivery costs, and registration documents! Description: The HTK three-way tipper not only impresses with our usual high quality standards. It is equipped with a practical hand pump, which can also be easily replaced with an electric hydraulic pump if required. From a permissible total weight of 3,000 kilograms, the electric and hand pump are installed as standard in the trailer. This makes tipping your load no longer a challenge, but a breeze! Technical data: Trailer type - Twin-axle Design - Aluminum Rear tipping - 45° Three-way tipping - 45° Iedpfx Ajzblmqol Toaw Weight - 880 kg Total weight - 3,000 kg Payload - 2,120 kg Internal length - 3,140 mm Overall length - 4,500 mm Internal width - 1,750 mm Overall width - 1,930 mm Internal height - 350 mm + 600 mm steel lattice extension Overall height - 1,260 mm + 600 mm steel lattice extension Loading height - 745 mm Tires - 13 inches Standard equipment: V-shaped drawbar, hot-dip galvanized Chassis and tipping platform, hot-dip galvanized Tipping platform made of steel, manufactured in one piece Hand pump, optional electric hydraulic pump from 3000 kg permissible total weight, electric and hand pump Humbaur multi-function lighting Side walls made of anodized aluminum, completely removable Rear flap, hinged Tie-down rings mounted in the platform floor, tensile force 800 kg per tie-down ring Support wheel Plank shaft as preparation for aluminum planks for easy retrofitting

Condition: used, maximum load weight: 8,750 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 06/2026, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, total width: 2,550 mm, total height: 970 mm, Year of construction: 2026, Equipment: ABS, Müller-Mitteltal KA-TA-R 11.9 ML / 024 TRIDEM TANDEM DUMP TRUCK - Dump body 5,000 x 2,420 mm (external dimensions) - Side board height 500 mm - Floor made of fine-grain steel S 420 MC, 4 mm thick - Side boards laser-welded from fine-grain steel, front wall fixed Ijdpfx Aloy S Nwve Tsaw - 2 pairs of folding lashing eyes with lashing capacity LC 5000 daN, each pair recessed into the steel floor at the front and rear. 4 pairs of folding lashing eyes with LC 3000 daN recessed into the steel floor. - Mesh hooks integrated on each side and at the rear in the side board supports and in the front wall. - Reinforced and certified body according to EN 12642 XL - 2 LED reversing lights on the rear of the trailer - Aluminum loading ramps without a track for rubber-tired and tracked vehicles (8 t/pair), 3,310 x 400 x 105 mm - Plastic toolbox - Aluminum compressed air tank - BPW, with S-cam brake - Tires 235/75R17.5 Suitable for a coupling height of approximately 925 mm unladen +/- 150 mm Subject to prior sale and errors! Sale exclusively subject to our general terms and conditions. Important note - Important information: Despite careful checking of all details in our offer, errors may occur. These are sometimes caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer in the sense of § 145 BGB. Rather, it provides information for initiating a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: used, empty load weight: 4,020 kg, overall weight: 19,000 kg, axle configuration: 2 axles, first registration: 01/2017, loading space length: 4,500 mm, loading space width: 2,420 mm, loading space height: 980 mm, loading space volume: 11 m³, tire size: 385/65 R22,5, wheelbase: 1,310 mm, Equipment: ABS, Colour RAL 6002 pale green Iajdpfxjxdk Ano Al Tsw Drum brake EBS Payload 14,980 kg Air-lift suspension Floor 4 mm - wall 4 mm BPW axles Fixed underrun protection 5 pairs of lashing rings Side aluminium drop sides, swinging and foldable with lift springs Electric Schwarzmüller sliding roof Errors excepted

Condition: used, empty load weight: 5,550 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 04/1999, loading space length: 6,500 mm, loading space width: 2,420 mm, loading space height: 780 mm, loading space volume: 12 m³, suspension: air, tire size: 385/65 R22,5, wheelbase: 3,200 mm, color: red, Equipment: ABS, Drum brake EBS Payload 18,450 kg Isdpfx Alot Tyf Ds Teaw Swinging and folding aluminum drop sides All stanchions removable BPW axles Errors excepted

Condition: used, empty load weight: 4,220 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2011, next inspection (TÜV): 12/2026, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 1,000 mm, loading space volume: 12 m³, suspension: air, tire size: 385/65 R22,5, wheelbase: 1,310 mm, color: red, Equipment: ABS, Color: red (MB 3534) EBS (electronic braking system) Disc brakes Payload: 13,780 kg Floor: 5 mm Hardox steel BPW axles Alcoa aluminum rims Foldable underrun protection 4 pairs of lashing rings Rolltarp Iedpjy Uuvpjfx Al Tsaw Platform Side aluminum side panels, pivoting and foldable, with lifting aid Subject to errors and omissions.

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT21201011556, empty load weight: 3,300 kg, maximum load weight: 8,200 kg, overall weight: 11,500 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 450 mm, total length: 6,900 mm, total width: 2,550 mm, total height: 1,580 mm, suspension: steel, tire size: 235/75 R17,5", color: red, Demonstration vehicle Iodelhpzvjpfx Al Teaw The images are archive images; the vehicle may still be in use! Steel welded construction, continuous tilting shaft at the rear with 80 mm ball bearing, gearbox support at the front, foldable rear support, 2 chock blocks with holder, steel underrun protection, splash guards at the rear across the entire width, quarter panel fenders, spare wheel, same brand as the standard tires, steel rim, loose, 1 plastic toolbox, with insert, w=620/h=360/d=440 mm, lockable with a padlock. (Lock not included) Note: The side panel touches the storage box when folded down. Lockable storage space for loading ramps under the loading area, 1 pair of aluminum ramps, 3,000 mm long, 360 mm wide, load capacity per pair 8,000 kg (mounting rail for ramps at the rear) Drawbar with tested 40 mm tow hitch, drawbar height adjustable via spindle, max. adjustment range 300 mm BPW drum brake axles, axles/chassis laser-aligned to reduce tire wear and fuel consumption, parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (lever compensation) 2-line pneumatic braking system, color-coded line routing for easy maintenance. Hand spindle parking brake, integral air reservoir, ABS and ALB, with ABS connector at the front, with connection cable. Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS, 2 fail-safe coupling heads at the front, with connection lines to the truck 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front 2 white/red outline lights at the rear, 2 x 7-pole fail-safe connectors at the front, with connection cable Three-way tipper, hydraulic multi-piston press with stroke limitation and safety cable, low-pressure cylinder up to max. 170 bar, without throttle. If required, this must be retrofitted on the truck, hydraulic connection with SVK connector NW 10/3, including connection hose Operation hydraulically via truck auxiliary drive Stable tipping bridge with 4 mm steel plate floor, side panel structure made of steel, side walls continuous, foldable and pivotally mounted with central locking at the bottom. Rear corner posts can be plugged in. Rear wall foldable and pivotally mounted, with central locking at the bottom. Platform length approx. 5,000 mm, side walls with 6 hinges at the bottom, platform width 2420 mm 5 pairs of lashing eyes in the floor, each 5 tons Country of registration: Germany, with Dekra approval and certificate (according to §13 EG - FGV), 24/7 service hotline, prepared for single-row license plate holder, contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear The images are archive images; the vehicle may still be in use!

Condition: new, empty load weight: 5,200 kg, maximum load weight: 12,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,420 mm, total length: 2,550 mm, total height: 7,700 mm, suspension: air, tire size: 435/50 R19,5, wheelbase: 1,450 mm, Equipment: ABS, truck registration, | MFCT UNISTAR ZPX19.550 | 3-way tandem tipper trailer | BPW axles with drum brake | Loading dimensions: W: 2.46 m, Side wall height: 70 cm, L: 5.50 m | Towing eye 50 mm | Hitch height 102 cm | Tyres: 435/50 R19.5 | New vehicle | Loading ramps | Lashing rings | Ramp payload: 10,000 kg | Ramp width: 40 cm | Pneumatic rear board with remote control. | Subject to errors, input mistakes and prior sale. Iedpoy Sn Adsfx Al Tjaw

Condition: used, empty load weight: 4,160 kg, maximum load weight: 13,840 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2026, loading space length: 5,010 mm, loading space width: 2,420 mm, loading space height: 800 mm, suspension: air, tire size: 385/65R22,5, Equipment: ABS, truck registration, | Humbaur HTK195024 gravel 3-way tipper | Fixed drawbar | Hot-dip galvanized frame | Hydraulic connections | Loading area dimensions: L: 5.0m W: 2.42m Height: 0.80m | Side walls made of Hardox 800x2.5mm, swinging | Air suspension | Floor made of 4mm high-wear-resistant HB450 steel | Superstructure KTL and powder-coated, RAL9006 white aluminium | 6 pairs of lashing rings, each lashing point rated at 3000kg | SAF axle with drum brake | Gross weight: 18,000 kg, payload: 13,720kg | 50mm towing eye | Tires: 385/65R22.5 | Operating voltage 24V | Subject to prior sale, input errors excepted. Iaodey Snzajpfx Al Tew

Condition: new, functionality: fully functional, machine/vehicle number: 12332580, empty load weight: 680 kg, maximum load weight: 1,920 kg, overall weight: 2,600 kg, axle configuration: 2 axles, permissible axle load (axle 1): 1,300 kg, permissible axle load (axle 2): 1,300 kg, loading space length: 3,060 mm, loading space width: 1,800 mm, loading space height: 700 mm, total length: 4,400 mm, total width: 1,920 mm, trailer brake: trailer braked, Year of construction: 2026, Loading dimensions approx. 1800 mm x 3060 mm External dimensions approx. 1920 mm x 4400 mm Gross vehicle weight: 2600 kg Ijdpfey I Ufksx Al Tjaw Payload: approx. 1920 kg (Payload may vary depending on optional equipment) Manufacturer: Debon Special features - 3-way tipper "PW2.4E" - Electric hydraulic pump (battery-powered) - Charging contacts in the frame profile (12V / compatible with chargers) - 6 lashing rings in the loading floor - H-frame, galvanized steel (installed / removable) - 350 mm foldable / removable aluminium side panels - 350 mm foldable / removable aluminium side wall extension - Ramp compartment (without ramps; ramps available as optional accessory) - Vehicle documents included Additional equipment - Floor plate: galvanized steel sheet over phenolic plywood - Wheel chocks + holders Chassis - Axle and drawbar fully hot-dip galvanized | Rubber suspension axle | V-drawbar with ball coupling | Heavy-duty automatic jockey wheel Electrics - 12 volt | 13-pin connector | Rear fog lamp | Marker lights If you would like to purchase this trailer or have further questions about trailers, please use our internal 3-way tipper trailer "No. 12332580".

Condition: used, maximum load weight: 14,900 kg, overall weight: 19,000 kg, axle configuration: 2 axles, first registration: 02/2019, next inspection (TÜV): 02/2027, loading space length: 5,100 mm, loading space width: 2,430 mm, loading space height: 1,000 mm, loading space volume: 12 m³, Equipment: ABS, * Foldable under-ride protection * ABS * Duomatik air connection * Front fairing * Towing device with offset plate, height-adjustable * BPW axles * 5-chamber tail lights ----Body: 3-sided tilting platform body, steel front and steel rear wall, steel floor, lashing points, spring-relieved aluminum side walls on the left and right (pivoting and foldable). Isdpfx Asy T Di Njl Teaw For sale to commercial businesses only. IN CASE OF EXPORT, ONLY THE NET PRICE IS TO BE PAID!!!!! ALL INFORMATION WITHOUT GUARANTEE, INCLUDING EQUIPMENT AND ACCESSORIES. Our general terms and conditions (see imprint) form the basis for all purchase contracts, invoices, proforma invoices, orders and sales negotiations.

Condition: used, maximum load weight: 14,900 kg, overall weight: 19,000 kg, axle configuration: 2 axles, first registration: 02/2019, next inspection (TÜV): 02/2027, loading space length: 5,100 mm, loading space width: 2,430 mm, loading space height: 1,000 mm, loading space volume: 12 m³, Equipment: ABS, * Foldable underrun protection * ABS * Duomatik air connection * 5-chamber taillights * Front wind deflector * Towing device with offset plate, height-adjustable * BPW axles ----Superstructure: 3-sided tilting platform, steel front and rear walls, steel floor, lashing points, spring-relieved aluminum side panels on the left and right (pivoting and foldable). Iedoy T Dkajpfx Al Toaw Sale only to commercial businesses. IN CASE OF EXPORT, ONLY THE NET PRICE IS TO BE PAID!!!!! ALL INFORMATION IS WITHOUT GUARANTEE, INCLUDING EQUIPMENT AND ACCESSORIES. Our general terms and conditions form the basis of all purchase agreements, invoices, proforma invoices, orders, and sales discussions (see our legal notice for details).