Condition: used, For sale is a propeller agitator from Erwin Stelzer Warburg. It is the DRX3204D model. Agitator data: Dodpfx Acega I Sxo Uswb RPM: 1435 V: 220 / 380 kW: 2.2 Shaft length: 500mm Impeller diameter: 280mm Connection: DN250 Further information can be found on the nameplate.

Condition: used, Two agitator motors without propellers from TMR are for sale. These are model F 130 / 8. Motor specifications: Djdpfx Aoga D Dxsc Uswb RPM: 715 V: 380 kW: 3 Shaft length: 1200mm and 1300mm

Condition: used, For sale is a propeller mixer from Erwin Stelzer Warburg. It is model SM/62E.D2. Mixer specifications: RPM: 985 V: 230 / 400 kW: 0.75 Shaft length: 400 mm Dodpfxoga I Tys Ac Uewb Propeller diameter: 220 mm Connection: DN200 For further information, please refer to the nameplate.

Condition: used, Soldering station, soldering iron, chip solder, soldering system, desoldering station Dwedstu Rk Espfx Ac Usb -Manufacturer: Weller, desoldering station type WDD 81V -Voltage: 230/24 V -Operating pressure: 4-6 bar -Dimensions: 190/120/H110mm -Weight: 2.3 kg

Condition: new, Hand planer Virutex CE 20 J Universal machine for left and right operation. 750W 13000 rpm. With quick depth adjustment. Dodjum Smyopfx Ac Uswb In original packaging. 1 piece

Condition: ready for operation (used), For sale is the propeller agitator DRK8P6/12D from Erwin Stelzer Warburg. Product data: Dwjdpfsfr Ifdsx Ac Uob 18/4 kW 380V 34.2/10.8 A 980/480 RPM Shaft length 780mm Impeller diameter 420mm 0.92/0.68 cos IP 44 50 Hz Operating mode S1 Insulation class E Nameplate (photo)

Condition: ready for operation (used), For sale is a stirrer motor from TMR, including the drive shaft. This is model MD 5.5 / 1000. Product data: 1440 RPM 380/660 V 5.5 kW 1520 mm shaft length Dsdpjfwlz Iefx Ac Ujwb 3 kW

Condition: good (used), For sale are three DRK66D propeller mixers from Erwin Stelzer Warburg, equipped with an emergency stop switch. Dwodpfx Asfr Iguec Usb Product specifications: 8.5 kW 380/660 V 20.5/11.9 A 960 rpm Propeller diameter 400 mm Flange diameter 400 mm 0.74 cos φ Operating mode S1 Insulation class E IP44 50 Hz

Condition: good (used), For sale are four propeller mixers, model DRK64D, manufactured by Erwin Stelzer Warburg. One propeller blade is slightly bent. Dwsdpofr Iihjfx Ac Ueb Product data: 11 kW 380/660 V 25.0/14.5 A 1450 rpm Shaft length 600 mm Blade diameter 340 mm DN250 0.85 cos IP44 50 Hz

Condition: good (used), Pipe saw, pipe jigsaw, support jigsaw, reciprocating saw, handsaw, jigsaw Dwsdpeydikxsfx Ac Ueb -Manufacturer: Fein, pipe reciprocating saw type AST 663 with accessories -Power: 750 W -Stroke rate: 300 /min -Accessories: Transport case, saw blades (see photos) -Box dimensions: 680/400/H350 mm -Total weight: 27 kg

Condition: ready for operation (used), 11x DRK 26 H mixers from Erwin Stelzer Warburg, equipped with emergency stop switches. 8x with propeller, 3x without propeller. Product specifications: 1 kW 220/380 V Dedjfr Ianjpfx Ac Uewb 5.9/3.4 amps 920 rpm 2.7 hp 0.64 cos φ Insulation class E Shaft length 400 mm Shaft diameter 30 mm Overall length 800 mm Impeller diameter 240 mm Connection: DN125

Condition: excellent (used), TruTool PN 200 electric hand cutting machine Product features Dwodpfxjuhm E So Ac Ujb The new TruTool PN 200 vibrating shear is mainly used for cutting C-L-U sections, trapezoidal sheet metal, etc. components. The device with a short tool for processing sheet metal with a profile depth of up to 85 mm and for C-L-U sections. Also for corrugated sheet metal. Ideal for hard-to-reach places. The working direction can be adjusted 360° easily and without tools in 45-degree steps. Minimized set-up time Replacement of punch and yoke without interruption and without tools. Unmatched speed Fast and efficient, 2.1 meters per minute at 400 N/mm2 structural steel. Application: Trapezoidal sheet metal For cutting profiles up to 86 mm deep and 132.5 / 40 mm wide. For straight and diagonal cuts. Profiles For cutting C-L-U profiles. Corrugated sheet For cutting and slitting. For bevel cuts and internal and radial cuts. - MAXIMUM SHEET THICKNESSES: - MAXIMUM THICKNESS OF 400 N/MM² STEEL SHEET: 2 mm. - MAXIMUM THICKNESS OF STEEL 600 N/MM²: 1.5 mm - MAXIMUM THICKNESS OF STEEL SHEET 800 N/MM²: 1 mm - MAXIMUM THICKNESS OF SHEET METAL MADE OF ALUMINUM UP TO 250 N/MM²: 3 mm - RADIANCES: - LOWEST RADIUS: 50 mm - GENERAL INFORMATION: - OPERATING SPEED: 2.1 m/min. - NUMBER OF SHAKES AT NOMINAL LOAD: 1500 1/min. - INITIAL HOLE DIAMETER: 24 mm - RATED POWER CONSUMPTION: 550 W

Year of construction: 2014, operating hours: 10 h, condition: as good as new (ex-display), machine/vehicle number: 6151656290, Desoutter Battery Angle Screwdriver shut off ELS15-480-A Dwsdpfx Ascr H Eajc Usb Demonstration tool Charger 230 V Ladegeraet + 2 Batterys (18 V 2,6 Ah) included Free speed: 200 to 480 rpm Torque Range: 44,2 in.lb till 133 in.lb Output drive: Sq. 3/8 Length: 16,5 in. Weight (without Battery) : 2,6 lb.

Condition: used, For sale is a stirrer motor from YTRON. It is the model Y11.00FC-4/II10-IV. Motor data: RPM: 1470 V: 480 kW: 11 Connection: DN200 Dwsdpsga Dx Tefx Ac Ueb Further data can be found on the nameplate.

Condition: new, Length: 6070 mm (approx. 6 m) Slot size: 10 mm Open slots (8 slots) Available quantity: 11 cartons of 6 pieces each 1 carton of 5 pieces Total number of bars: 71 pieces Available length: 430.97 m Dodpey Urptjfx Ac Uewb Smaller quantities can be supplied. Please send us your request with the desired quantity. Material: Aluminum Article/material number: 3842 557 201 What is it used for? Machine frames Protective enclosures Conveyor technology Assembly and work tables Robot cells Supporting structures in industry

Condition: new, Virutex hand planer. Especially for left and right hand use Long version for 100 % straight work. 990 W, 12,500 rpm. Incl. side guide Dodpfx Aeum Skxsc Ujwb 2 pieces in original packaging

Condition: good (used), Reciprocating saw, dovetail saw, tiger saw, saber saw -Manufacturer: Flex, reciprocating saw with carrying case -Type: SK 602 VE -Nominal power input: 1000 W -Stroke rate: 800 - 2400 /min Dwjdpfx Acsyhcm Io Ueb -Dimensions: 620/260/H110 mm -Weight: 9 kg

Condition: good (used), balancer, machine balancer, spring balancer, cable extension, weight compensator -Manufacturer: Fein, Balancer spring balancer -Load capacity: 1-3 kg -Number: 2x spring balancer available -Price: per piece -Dimensions: 260/200/135 mm -Dependent weight: 3 kg/piece Dodpfx Aeinwumec Uswb

Condition: good (used), Cordless angle drill/driver, cordless angle drill, -Manufacturer: Bosch, Cordless drill/driver type GWB 7.2 VE -incl.: charger -Quantity: 1x drill/driver available Dwjdow Iftqspfx Ac Usb -Transport dimensions: 240/180/H240 mm -Weight: 6 kg

Condition: good (used), Pipe reciprocating saw, pipe jigsaw, beam jigsaw, reciprocating saw, guide holder, pipe clamp -Manufacturer: Fein, holder for pipe reciprocating saw type AST 663 or similar Dsdpfx Acsxalyge Uewb -Clamping: with lashing strap -Number: 2x holders available -Price: per piece -Box dimensions: 390/310/H425 mm -Weight: 25 kg/piece

Condition: good (used), Balancer, machine balancer, spring balancer, cable extension, weight compensator -Manufacturer: Tecna, spring balancer type 9312 -Load capacity: 1 - 2 kg -Rope length: 1600 mm -Number: 1x spring balancer available Dsdpfx Aev U I S Sec Ujwb -Dimensions: 200/110/H55 mm -Own weight: 0.6 kg

Condition: good (used), Reciprocating saw, dovetail saw, tiger saw, saber saw -Manufacturer: Flex, reciprocating saw with carrying case -Type: SK ZSK 602 E Dodeyhcn Sjpfx Ac Uewb -Nominal power input: 1000 W -Stroke rate: 700 - 2400 /min -Dimensions: 620/260/H110 mm -Weight: 8.6 kg

Year of construction: 2005, condition: used, Balancers, machine balancers, spring balancer, cable pulley, counterbalance weight balancers -Manufacturer: Atlas Copco, type RIL 10C -Load capacity: 2.0 - 5.0 kg Dwedpfxsgggy Es Ac Usb -Dimensions: 200/250/70 mm -Own weight: 2.6 kg

Condition: used, Balancer, machine balancer, spring balancer, cable extension, weight balancer -Manufacturer: Tecna, spring balancer type 9181 in original packaging Dedpfsq Untvjx Ac Uswb -Load capacity: 10 - 14 kg -Rope length: 2500 mm -Quantity: 2x spring balancer available -Price per piece -Dimensions of cardboard: 270/200/100 mm -Net weight: 3,8 kg

Condition: new, Inverter system HEIDENHAIN UVR 120D Dwjdpfx Acsiihx No Usb