Aman Bouwmachines

Condition: used, This listing is for Maplelab Scientific Block Heater Dedpfx Aboztpyqszowa The unit is in full working condition and ready for immediate use The Maplelab Scientific block heater is a laboratory dry-block heating unit designed for controlled heating of samples in laboratory tubes and vessels. The BH-603 model is suitable for applications requiring consistent sample heating at controlled temperatures Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: used, Model MF 1450 I working table 1400x2800x350 mm II working table X-Y-U servo motors 1,5 kW, 120-2000 rpm Z servo motor 1 kW, 120-2000 rpm Processing engine 8,5 kW, 24000 rpm Djdpfjztpykex Abzowa Vacuum system 308 m³/h Automatic tool changing 6 pcs Horizontal processing engine 2,2 kW, 12000 rpm File formats can be operated DWG, DXF, IGES Power and air consumption 14 kW- 8 Bar Made in Turkey 2015 y Transport dimensions 6500x2150x2300 mm Weight 3500 kg Price 10700 Eur (EXW Jonava, Lithuania)

Condition: good (used), Year of construction: 1986, travel distance X-axis: 710 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 455 mm, x-travel: 710 mm y-travel: 600 mm z-travel: 455 mm Control: Dialog 4 Speed: 6300 rpm Dodpfx Aoztpx Tsbzjwa Tool holder: SK40 Quill stroke: 80 mm Table size: 550 x 1000 mm Table load: 0.6 t Total power requirement: kW Machine weight approx.: 4 t

Condition: used, Year of construction: 2005, Steam generation plant, comprising the following main components: - Three-pass steam boiler (Loos) for the production of 2,000 kg/h of saturated steam at rated load - Oil burner (Weishaupt) for EL heating oil with an output of up to 2,145 kW - Economiser (Loos) with approx. 30 m² of heat transfer surface area and an insulated casing - 2 feedwater pumps (Grundfos) - 1,500 l insulated feedwater tank (Loos), horizontal, with feedwater degassing Additional title: oil-fired three-pass steam boiler with economiser Steam production capacity: 2000 kg/h ; corresponds to a gross heat output of 1,335 kW Max. operating pressure: 13 bar Max. operating temperature: 195 °C Exhaust gas loss: 4,6 % Voltage: 400 V Frequency: 50 Hz Dwodpfx Ajztpx Hobzja Position: horizontal Base construction: three-pass design Features: Steam boiler; oil burner; exhaust gas heat exchanger (economiser); feedwater tank; 2 x feedwater pumps; sensors; actuators; control cabinet; various pipes and valves

Condition: new, Модель MX5115 Размер стола 640×580 мм. Наклон стола 0-45° Ход вертикального стола 100-120 мм. Максимальная рабочая толщина 50-120 мм. Мощность двигателя 2,2 кВт/3,0 кВт Электропитание 220 В/380 В, 50 Гц Dwsdpsztpxtefx Abzsa Скорость шпинделя 15 000/18 000 об/мин. Диаметр хвостовика инструмента 6,35–12,7 мм. Транспортные размеры 780×710×900 мм Вес 150/180 кг Цена 760 Eur (EXW Йонава, Литва)

Condition: used, Compact pub brewery with a 2-vessel brewhouse, tanks, bottling equipment, and utility systems. The system consists of the following components: 1. Malt mill (Summer 2017) Roller mill on a painted steel frame with a capacity of approx. 400 kg/h of malt (2.2 kW motor power), featuring a mechanism for fine, rapid adjustment of the roller gap and a bagging spout at the bottom. 2. Brewhouse (Wengert, 2018) Two-vessel brewhouse with a mash/wort kettle and a lauter tun made of stainless steel with copper-clad lids. The kettle (nominal capacity: 500 l) is equipped with a top-driven two-blade propeller agitator and is fired by a gas burner (Weishaupt). The lauter tun is equipped with a rake, a drop floor, and a side spent grain flap with a chute. The brewhouse features a control system (Movonik, 2017) for automating temperature control and agitator speed. The brewhouse is mounted on a stainless steel frame that includes a wort pump, control cabinet, control unit with touchscreen display, and various pipes, valves, and fittings. Wort cooling and aeration are provided by a freestanding two-stage plate heat exchanger and a wall-mounted wort aeration unit. 3. Fermentation/Storage/Pressure Tanks/Transport Tanks - Open fermentation vat (Speidel) with a capacity of 675 liters. The vat is equipped with a temperature sensor and temperature control unit, jacket cooling, a lid, and outlet lines at the bottom and in the lower section of the frame. - 5 cylindroconical fermentation and storage tanks (Mueller, 2017), each with a capacity of 1,250 liters, 2 cooling zones, and up to 3 bar of overpressure. Each tank is equipped with a temperature sensor, its own temperature control unit, a pressure gauge, a bung, a sampling tap, a cleaning line, and a discharge line with a manual valve. - One cylindroconical fermentation and storage tank (Mueller, 2017) with a capacity of 625 liters, 2 cooling zones, and an operating overpressure of up to 3 bar. The tank is equipped with a temperature sensor and temperature control, a pressure gauge, a bung, a sampling tap, and cleaning and discharge lines with manual valves. - 4 horizontal dispensing tanks (Mueller, 2017), each with a capacity of 520 liters, a cooling jacket, and up to 3.9 bar overpressure. The tanks are mounted on a shared stainless-steel truss structure. Each tank is equipped with: a temperature sensor and its own temperature control unit, sight glasses, a sampling valve, a hose-type level indicator, a pressure gauge, and a discharge line with a manual valve. A four-line CO₂ pressure-reducing station is also located on the side of the tank group. - Horizontal transport tank (Mueller, 2019) mounted on a frame with fork rails and jacket cooling. The tank has a capacity of 1,020 liters and can withstand up to 3.9 bar of overpressure. Equipped with a pressure gauge, safety valve, sight glasses, and a discharge line with a manual valve. Suitable for use with tank liners. 4. Filling - Batch bottle washing machine on a mobile stainless steel frame for processing up to 10 bottles per cleaning cycle. Additional equipment includes a centrifugal pump, a detergent tank, a fold-down stainless steel hood, and various pipes and fittings. - Filler for party cans and siphons (Leicht, 2018) with two filling stations. Semi-automatic, mounted on a stainless steel frame with various fittings and controls. 5. Utilities - Stainless steel hot water tank with electric reheating via screw-in heating elements with a power rating of 7... Dedpfsztpxmsx Abzewa

Condition: used, This listing is for Eppendorf ThermoMixer C The unit is in full working condition and ready for immediate use The Eppendorf ThermoMixer C combines precise temperature control with efficient mixing for a wide range of laboratory applications. It is designed for consistent sample incubation and mixing in microtubes and plates, making it suitable for molecular biology and life science workflows Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: Dedpeztpxgofx Abzewa This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: used, Year of construction: 2018, Vertical stainless steel pressure tank, most recently used for storing (degassed) drinking water. Additional title: Vertical stainless steel tank Dsdpfx Abeztpxaszowa Gross volume: 7060 l Max. overpressure: 4 bar Material: stainless steel Position: standing on 3 feet Base construction: cylindrical tank with dished bottoms Features: Cleaning line; pressure gauge; safety valve; ladder bracket; lifting eyes

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, Equipment: documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: Dedeztpw Nepfx Abzewa - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, warranty duration: 12 months, total length: 7,500 mm, total height: 700 mm, total width: 3,600 mm, BOOSTON ER-02/750 – STATIONARY ASSEMBLY TABLE, 7.5 m, FOR PREFABRICATION OF HOUSES BOOSTON MACHINERY is a manufacturer of machines and equipment for prefabricated house plants. We produce stationary assembly tables, rotary tables, butterfly tables, and complete production lines for the prefabrication of timber structures. ## TECHNICAL SPECIFICATIONS ➡️ Working length of the table: 7500 mm Other available lengths: 3.0 m / 4.5 m / 6.0 m / 7.5 m / 9.0 m / 10.5 m / 12.0 m / 13.5 m / 15.0 m ➡️ Working height of the table: 700 mm (adjustment ±50 mm) ➡️ Working width of the table: 3600 mm – other widths can be manufactured ➡️ Height range of the prefabricated wall using the SD-01 clamping cylinder: 600–3400 mm ➡️ Vertical locking pins: 0–240 mm, diameter 35 mm (adjustable) ➡️ Horizontal transport of finished elements – optional: set of pneumatically lifted rollers – 2 rows of rollers at the edges of the table ➡️ Table type: stationary table ➡️ Pneumatic supply: 8 BAR – for the ER-02R version equipped with rollers for horizontal transport ➡️ Maximum permissible load: 100 kg/m² of finished prefabricated element, with a maximum element height of 3000 mm ## ADDITIONAL OPTIONS 1. SD-01 clamping cylinders 2. Set of pneumatically lifted rollers from the table surface – 2 rows of rollers BOOSTON ER-02 The ER-02 stationary assembly table is a versatile workstation designed for the prefabrication of walls and other elements in timber frame construction. The modular design of the work platform allows for expansion of the workstation and connection to other BOOSTON assembly and rotary tables, creating a complete production line. The ER-02 table is available in lengths from 3 to 15 meters. The standard work area, along with the support, enables the prefabrication of elements up to 3400 mm in height using the SD-01 clamping cylinders. We manufacture our machines in Poland. Manufacturer: BOOSTON MACHINERY Dedpfxeztpwpe Abzswa

Condition: like new (used), Shelf length: 3000 mm Dwjdeztpwcepfx Abzea Shelf width: 1300 mm Number of pistons: 6 Water heating Safety switch with shear pin

Condition: refurbished (used), Year of construction: 2019, machine/vehicle number: R-00658, load capacity: 45 kg, arm reach: 2,050 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, Refurbished ABB 4600-45/2.05 manufactured in 2019.04. The robot comes with an IRC5 controller including Flexpendant DSQC679. Dwodpfx Aboztpv Sjzja   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Model: 4600-45/2.05 Model Number: IRB Year of Manufacture Robot: 2019.04 Warranty term (months): 12   Payload (kg): 45 Reach (mm): 2050 Repeatability (mm): ± 0.05 Controlled Axes: 6-axis Installation Type: Floor, Upside-down Mount Weight (kg): 425   Controller: IRC5 Year of Manufacture Cabinet: 2019.04 RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15

Condition: excellent (used), fuel type: diesel, color: yellow, Year of construction: 2001, operating hours: 8,535 h, General information Year of manufacture: 2001 Model year: 2001 Serial number: ADC01183 Technical information Number of cylinders: 6 Empty weight: 20.600 kg Functional Working width: 280 cm Condition Technical condition: very good Visual appearance: very good Financial information Price: On request Other information Track width: 280 cm Djdpfxjztpvxo Abzswa

Condition: refurbished (used), Year of construction: 2008, machine/vehicle number: R-00664, load capacity: 50 kg, arm reach: 2,050 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C302#EGN, Refurbished FANUC M-710iC/50 manufactured in 2008.07. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard! Djdpfx Asztpvrobzjwa   Brand: FANUC Model: M-710iC/50 Model Number: A05B-1125-B201 Year of Manufacture Robot: 2008.07 Warranty term (months): 12   Payload (kg): 50 Reach (mm): 2050 Repeatability (mm): ± 0.03 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 560   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2008.07 RCC Length (m): 7   Teach Pendant: A05B-2518-C302#EGN Teach Pendant Cable Length (m): 12

Condition: used, mileage: 138,404 km, power: 315 kW (428.28 HP), first registration: 10/2016, fuel type: diesel, empty load weight: 13,005 kg, maximum load weight: 12,995 kg, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 3,600 mm, next inspection (TÜV): 08/2026, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, Equipment: ABS, air conditioning, cabin, central locking, cruise control, fog lights, low noise, navigation system, onboard computer, parking heater, traction control, trailer coupling, Vehicle location: Bovenden, ClassicSpace, Mercedes PowerShift 3, Mountable body, 1 comfort seat, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, radio, cruise control, navigation system Dedpfx Asztpvljbzjwa Wheelbase: 3600 mm Body: Palfinger P20 roll-off system, front axle load 8.0 t, trailer brake 2 - line, audio navigation system Bluetooth comfort, step with handrail on the roof, exhaust pipe downwards to the right, battery 220 Ah, air horns (2) on the cab roof, electrical pre-wiring in the cab 24V / 100 A, suspension: front springs 8.0 t, 3 leaves, rear lights construction site design, rear axle bevel gear 300, info display 10.4 cm with additional display, interior filter for construction site vehicles, air intake from the front, engine output to the rear, ISO pump, engine brake reinforced, parameterizable special module, retarder, rotating beacon left/right, reversing warning (audible warning signal outside), disc brakes front axle, drum brakes rear axle, rear cross member reinforced, protective plate under the main tank, seats in the cab: passenger seat armrest, seats in the cab: driver's seat comfort suspension seat, exterior sun visor, sun protection roller side window, driver's door, voltage converter 24V / 12V 10 A, steel rims 11.75x22.5 (on front axle), steel rims 9.00x22.5, storage compartment outside left, 12V socket in the passenger footwell, 24V socket in the passenger footwell additionally, stone guard grille, underrun protection at the rear, foldable, CB radio preparation, preparation for reversing camera, straight front axle, increased ground clearance, auxiliary heater (water), twin-plate clutch, emission standard EURO 6, ABS can be switched off, axle configuration: 6x4, trailer socket 24V / 15-pin, Arocs, exterior mirrors electrically adjustable and heated, differential lock rear axle, compressed air connection in the cab, compressed air tank steel, cab: width 2.30 m, cab: cab entry movable, cab: tilting mechanism hydraulic, cab: M ClassicSpace, cab: steel-sprung, standard, cab floor with engine tunnel 170 mm, suspension: leaf spring / leaf spring, suspension: rear springs 2x10 t, hard, electric window lifters, tinted windshield, generator 100 A, gearbox 12-speed - type: G 211-12, urea tank (AdBlue): 60 liters, manually operated lift roof (steel), interior filter: pollen filter, body/superstructure: tipper, fuel tank: 290 liters aluminum, left, steering pump unregulated, air compressor 2-cylinder, air dryer heated, engine 10.7 liters - 315 kW R6 diesel (OM 470), engine compartment encapsulation, auxiliary drive MB 131-2c, ramp mirrors, waste heat recovery, rear window, disc brakes with full protection, seat cover / upholstery: fabric, seats in the cab: passenger function seat, stabilizer front axle, socket cab 24V, tachograph / EG control unit, preparation for toll collection, water pump regulated, approved ... ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: good (used), Year of construction: 2001, operating hours: 28,000 h, spindle speed (max.): 3,600 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 930 mm, Manufacturer: Spinner Model: MC 500/1000 Year of manufacture: 2001 Control system: Siemens SINUMERIK 810D Turning spindle: 3600 rpm, 11 kW, 172 Nm Technical features: Turning spindle: 3,600 rpm, 11 kW, 172 Nm 12-position tool turret (VDI 30) Hydraulic steady rest, base body manual – MK4 Hydraulic chuck, Ø 250 mm Chip conveyor Coolant pump C-axis: 360° Travel distances X-axis: 210 mm Z-axis: 930 mm Dwodpfx Ajztpvfebzea C-axis: 360°

Condition: excellent (used), Year of construction: 2019, operating hours: 9,000 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 35 mm, clearance between the columns: 420 mm, displacement volume: 154 cm³, injection pressure: 2,429 bar, KRAUSS MAFFEI KM 80-380 CX Stock No.: 503701 Manufacturer: KRAUSS MAFFEI Type: KM 80-380 CX Control: MC6 Year of Manufacture: 2019 Operating Hours: 9000 h Your chance to acquire a top-maintained production cell: We are selling a KraussMaffei KM 80-380 CX from 2019, equipped with the proven MC6 control system. The machine has only 9,000 operating hours and runs absolutely smoothly. Thanks to the precise 35 mm screw, this injection molding machine is perfect for the efficient production of demanding technical components. Available for immediate pickup, demonstration possible. Technical Data, Clamping Unit Side Clamping Force: 800 kN Tie Bar Spacing h x v: 420 x 420 mm Platen Size h x v: 670 x 670 mm Minimum Mold Height: 250 mm Maximum Mold Height: 750 mm Opening Stroke: 500 mm Ejector Stroke: 150 mm Ejector Force: 43 kN Centering of Moving Platen D: 125 mm Centering of Fixed Platen D: 125 mm Tool Weight: 1000 kg Dwodpeztpu Uofx Abzea Technical Data, Injection Side Screw Diameter: 35 mm Injection Volume: 154 ccm Injection Pressure: 2429 bar Screw Length: 23 l/d Screw Speed: 295 rpm Free Injection Rate: 96 g/s PS Number of Heating Zones: 5 Dimensions & Weight Machine Dimensions L x W x H: 4.4m x 1.7m x 2m Total Weight: 3900KG Equipment 3 freely programmable inputs and outputs Screen text German Screen text Polish CEE socket 16A CEE socket 32A Hydraulic core pull 1x Air valve 1x Machine with material hopper Machine with water manifold Leveling elements BDE interface Interface for color dosing unit Schuko socket 10A Wear-resistant plasticizing unit

Condition: excellent (used), Hitachi X-MET8000 Optimum – handheld XRF spectrometer Dodsztpu Ispfx Abzjwa For sale: a professional, portable Hitachi X-MET8000 Optimum X-ray fluorescence spectrometer (Oxford Instruments) from 2017, designed for rapid and non-destructive elemental analysis and alloy identification. Device condition: very good. The spectrometer is offered as a complete set, including a transport case, two batteries, a charger/power adapter, accessories, documentation, and certified reference material from MBH Analytical. The device is equipped with Alloy_FP and Alloy_LE_FP calibrations. The Optimum model uses an SDD detector and a 6-position filter system, and its analytical range covers elements from Mg to U. Key specifications: Manufacturer: Hitachi High-Tech / Oxford Instruments Model: X-MET8000 Optimum Year of manufacture: 2017 Technology: XRF – X-ray fluorescence Condition: very good Calibrations: Alloy_FP, Alloy_LE_FP Element range: Mg–U Weight: approx. 1.5 kg with battery.

Condition: excellent (used), Year of construction: 2021, operating hours: 6,000 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 40 mm, clearance between the columns: 420 mm, displacement volume: 201 cm³, injection pressure: 1,860 bar, KRAUSS MAFFEI KM 80-380 CX Stock No.: 503703 Manufacturer: KRAUSS MAFFEI Dwsdeztpuzspfx Abzoa Type: KM 80-380 CX Control System: MC6 Year of Manufacture: 2021 Operating Hours: 5646 h Secure an almost new production system: A compact and highly efficient KraussMaffei KM 80-380 CX from 2021 is for sale. The machine has only run for 6,000 original operating hours and is in immaculate condition. Equipped with the modern, intuitive MC6 control system and a versatile 40 mm screw, this system offers maximum precision for your production. Technical Data Clamping Unit Clamping Force: 800 kN Tie Bar Distance h x v: 420 x 420 mm Platen Size h x v: 670 x 670 mm Minimum Mold Height: 250 mm Maximum Mold Height: 750 mm Opening Stroke: 500 mm Ejector Stroke: 150 mm Ejector Force: 43 kN Centering of Moving Platen D: 125 mm Centering of Fixed Platen D: 125 mm Technical Data Injection Unit Screw Diameter: 40 mm Injection Volume: 201 ccm Injection Pressure: 1860 bar Screw Length: 20 l/d Free Injection Flow Rate: 295 g/s PS Number of Heating Zones: 5 Dimensions & Weight Machine Dimensions L x W x H: 4.3m x 1.6m x 2m Total Weight: 3900 KG Equipment 3 freely programmable inputs and outputs Screen text German Screen text Polish CEE socket 16A CEE socket 32A Increased ejector force Core pull hydraulic 1x Air valve 1x Machine with material hopper Machine with water manifold Leveling elements Plasticizing unit, highly wear-resistant and corrosion-resistant BDE interface Interface for color dosing unit USB interface Schuko socket 10A

Condition: new, Year of construction: 2026, cutting length (max.): 7,000 mm, Equipment: documentation/manual, LOG HORIZONTAL BAND SAW WRC 1050 AC – Power, Precision, and Reliability in Wood Processing WITH LATEST TECHNOLOGY Looking for a band saw that combines power, precision, and efficiency? The WRAVOR WRC 1050 AC delivers all that – and more! This horizontal band saw is designed for serious wood processing professionals, yet it remains a reliable and versatile solution even for smaller workshops. Key Benefits: 👉🏻High Efficiency 👉🏻Exceptional productivity with cutting capacity of up to 30 m³ in an 8-hour shift, with minimal energy consumption and low maintenance costs. 👉🏻Precise Cutting Thanks to advanced technology and a stable construction, the WRAVOR WRC 1050 AC ensures clean and accurate cuts – even with the toughest types of wood. 👉🏻User-Friendly: Intuitive controls, fast installation, and easy adjustments make this saw ideal for both industrial applications and individual craftsmen. 👉🏻Versatility and Durability: Built from high-quality materials, this machine is capable of processing various wood types – from soft to hard, solid, or composite. 👉🏻Smart Technology: An innovative control system automatically adapts to different working conditions, saving both time and resources. 👉🏻Eco and Energy Efficient: Low energy consumption reduces operational costs while being environmentally friendly. _____ Specifications: • Model: WRC 1050 AC • Motor Power: 30 / 37 / 45 kW • Cutting Capacity: up to 35m³ / 8h • Maximum Log Diameter: Ø 1050 mm • Applications: industrial wood processing, carpentry, cutting of pallets, beams, solid wood, and more _____ Dwjdpfeztpuuex Abzea WRAVOR WRC 1050 AC – Your Partner in Every Cut! For more information or a quote, contact us today

Condition: used, This listing is for Bio-Rad Trans-Blot Turbo 690BR Transfer System The unit is in full working condition and ready for immediate use The Trans-Blot Turbo is a rapid protein transfer system designed for transferring proteins from electrophoresis gels to membranes for Western blotting. It provides a compact, efficient solution for routine laboratory protein analysis Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: Dwjdpfxoztpube Abzea By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: used, mileage: 85,801 km, power: 103 kW (140.04 HP), first registration: 02/2023, fuel type: diesel, empty load weight: 2,363 kg, maximum load weight: 1,137 kg, overall weight: 3,500 kg, wheelbase: 4,490 mm, next inspection (TÜV): 03/2027, fuel: diesel, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, loading space volume: 16 m³, loading space length: 4,750 mm, loading space width: 1,650 mm, loading space height: 2,050 mm, maximum speed: 155 km/h, Equipment: ABS, air conditioning, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, sliding door, traction control, * Very well-maintained German vehicle, first owner * Vehicle IDNT No.: WMA03VUY0P9009522 * New vehicle inspection Technical specifications: * Overall length: 7391 mm * Overall width: 2040 mm * Overall height: 2798 mm * Wheelbase: 4750 mm * Permissible total weight: 3500 kg * Unladen weight: 2363 kg * Payload: 1137 kg Loading space: * Length: 4750 mm * Width: 1650 mm * Height: 2050 mm Standard equipment: * Airbag, driver's side * Anti-lock braking system (ABS) * Drive type: Front-wheel drive * Exterior mirror, convex, left * Exterior mirror, convex, right * Battery: 70 Ah * Electronic stability program (ESP) * Driver assistance system: Hill start assist * Transmission: 6-speed * Body/structure: Box-type, large, with overhang * Fuel tank: 75 liters * Headlight range adjustment * Longlife service Dwjdpfx Aeztptwebzja * Wheelbase: 4490 mm * Tires: 205/75 R16C 113/111 R * Sliding door, loading/passenger compartment, right * SCR system (AdBlue technology) * Seat cover/upholstery: Fabric * Steel rims: 6.5x16 * Front bumper in gray with trim in vehicle color * Permissible total weight: 3.50 t Delivery throughout Germany possible! Trade-in possible! Leasing and financing also possible without a down payment Errors, printing errors and prior sale are reserved.

Condition: used, mileage: 39,859 km, power: 103 kW (140.04 HP), first registration: 01/2023, fuel type: diesel, empty load weight: 2,363 kg, maximum load weight: 1,137 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 4,490 mm, next inspection (TÜV): 01/2027, fuel: diesel, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, loading space volume: 16 m³, loading space length: 4,750 mm, loading space width: 1,650 mm, loading space height: 2,050 mm, maximum speed: 155 km/h, Equipment: ABS, air conditioning, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, sliding door, soot filter, traction control, * Well-maintained German vehicle, first owner * Vehicle ID number: WMA03VUY7P9006035 * New MOT/TÜV inspection Technical data: * Overall length: 7391 mm * Overall width: 2040 mm * Overall height: 2798 mm * Wheelbase: 4750 mm * Permissible total weight: 3500 kg * Unladen weight: 2363 kg * Payload: 1137 kg Cargo area: * Length: 4750 mm * Width: 1650 mm * Height: 2050 mm Dwedjztpt Depfx Abzea Standard equipment: * Airbag, driver side * Anti-lock braking system (ABS) * Drive type: Front-wheel drive * Convex exterior mirror, left * Convex exterior mirror, right * Battery: 70 Ah * Electronic Stability Program (ESP) * Driver assistance system: Hill start assist * Transmission: 6-speed * Body/superstructure: Box-type van, large, with overhang * Fuel tank: 75 liters * Headlight range adjustment * Longlife service * Wheelbase: 4490 mm * Tires: 205/75 R16C 113/111 R * Sliding door, cargo/passenger compartment, right * SCR system (AdBlue technology) * Seat cover/upholstery: Fabric * Steel rims 6.5x16 * Front bumper in gray with trim in vehicle color * Permissible total weight: 3.50 t Delivery throughout Germany possible!!! Trade-in possible!!! Leasing and financing possible, even without a down payment Errors, printing errors and prior sale reserved

Condition: used, mileage: 46,544 km, power: 103 kW (140.04 HP), first registration: 01/2023, fuel type: diesel, empty load weight: 2,363 kg, maximum load weight: 1,137 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 4,490 mm, next inspection (TÜV): 01/2027, fuel: diesel, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, loading space volume: 16 m³, loading space length: 4,750 mm, loading space width: 1,650 mm, loading space height: 2,050 mm, maximum speed: 155 km/h, Equipment: ABS, air conditioning, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, sliding door, soot filter, traction control, * Very well-maintained German vehicle, first owner * Vehicle IDNT No.: WMA03VUY7P9006035 * New MOT/TÜV inspection Technical data: * Overall length 7391 mm * Overall width 2040 mm * Overall height 2798 mm * Wheelbase 4750 mm * Permissible total weight 3500 kg * Unladen weight 2363 kg * Payload 1137 kg Cargo area: * Length 4750 mm * Width 1650 mm * Height 2050 mm Standard equipment: * Airbag, driver's side * Anti-lock braking system (ABS) * Drive type: Front-wheel drive * Exterior mirror, convex, left * Exterior mirror, convex, right * Battery 70 Ah * Electronic Stability Program (ESP) * Driver assistance system: Hill-start assist * Gearbox: 6-speed * Body/superstructure: Box-type, large volume, overhang * Fuel tank: 75 liters * Headlight range adjustment * Longlife service * Wheelbase 4490 mm * Tires 205/75 R16C 113/111 R * Sliding door, loading/passenger compartment, right * SCR system (AdBlue technology) * Seat cover/upholstery: Fabric * Steel rims 6.5x16 * Front bumper in gray with trim in vehicle color * Permissible total weight 3.50 t Delivery possible throughout Germany!!! Trade-in possible!!! Leasing and financing possible, even without a down payment Errors, printing errors and prior sale reserved Dwedpsztpt Rjfx Abzea

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Professional Double-Sided Planer (Thicknesser) GOODTEK GT-635ARD (Year 2018) For sale, we offer a high-quality, industrial-grade double-sided planer from the renowned Taiwanese manufacturer, Good Tek Machinery Co., Ltd. The GT-635ARD model from 2018 is a powerful and extremely precise machine designed for continuous operation in furniture factories and sawmills. The machine allows for simultaneous planing and thicknessing of wooden components on both sides during a single pass, significantly reducing processing time. 🌟 KEY FEATURES: Spiral cutterheads (top/bottom): Equipped with replaceable carbide inserts (TCT). They provide a perfectly smooth wood surface, longer blade life, and significantly quieter operation compared to traditional straight knives. Electronic digital panel: Allows for quick and precise setting of the planing thickness with an accuracy of hundredths of a millimeter. Smooth feed with frequency converter: Adjustment of the feed speed allows for perfect matching of the working pace to the hardness and characteristics of the material being processed. Dedpfeztptdjx Abzswa CE certificate: The machine is fully approved for use in the European market and complies with strict safety standards. ⚙️ TECHNICAL SPECIFICATIONS: Manufacturer: Good Tek Machinery (Taiwan) Model: GT-635ARD Year of manufacture: 2018 Serial number: X6198 Maximum planing width: 635 mm Maximum planing height: 200 mm Total weight: 2880 kg (very rigid, heavy, cast iron construction that dampens vibrations) Power supply: AC 380 V / 50 Hz / Current: 56 A 🔌 MOTOR SPECIFICATIONS (Total power 38.5 HP / ~28.7 kW): Upper cutterhead motor: 20 HP (~15 kW) Lower cutterhead motor: 15 HP (~11 kW) Feed motor: 3 HP (~2.2 kW) Body/table lifting motor: 0.5 HP (~0.37 kW) 📈 TECHNICAL CONDITION: The machine is in perfect working order, well-maintained, and ready for immediate use in your facility. The electrical and mechanical components operate flawlessly. The central automatic lubrication system for the feed rollers guarantees trouble-free operation for many years.