Société Commerciale d’Equipement SAS

Condition: used, The CNC machine is in excellent condition, and all the vacuum cups are new. Dcsde Aib Uwspfx Aqvep

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Work area X: 4580 mm Dede Ah R Eiopfx Aqvjcp Work area Y: 1850 mm 5-axis electrospindle Number of drilling heads for vertical drilling: approx. 24 Number of drilling heads for horizontal drilling X: 4 Number of drilling heads for horizontal drilling Y: 2 33-position chain-type tool changer 1-position tool changer for saw blades Worktable with 8 rails Software: BiesseWorks Remote control panel 1 vacuum pump with a capacity of 250 m3/h Chip conveyor belt Safety mats Lateral safety guards Includes suction cups, some Uniclamps, and some HSK collets.

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 95566, functionality: fully functional, controller model: BIESSE XP 600, working width: 1,287 mm, spindle speed (max.): 24,000 rpm, working height: 170 mm, working length: 5,920 mm, TECHNICAL DETAILS Working area X: 5,920 mm Working area Y: 1,287 mm Working area Z: 170 mm C and A axes: available Dcjdps Ah Rhqjfx Aqvep Working areas for pendulum machining: 2 Work table: ATS-HTS-EPS Automatically positionable consoles: 10 units Stop pins per console: 2 units 5-axis milling spindle Spindle power: 9 kW / 11 kW at 60 Hz Speed: max. 24,000 rpm Tool holder: HSK-F63 Cooling: Liquid cooling Drilling head BH 26 Vertical drilling spindles: 16 units Horizontal drilling spindles in the X direction: 4 units Nut sawing units: 2 units Tool slots: 21 units Tool changer type: Chain tool changer MACHINE DETAILS UNICLAMP clamping systems: 6 units Control system: BIESSE XP 600 Motor power: 5.5 kW Conveying capacity: 244 / 286 m³/h Compressed air: 7–7.5 bar Total power: 25.3 kW Machine weight: 4,200 kg EQUIPMENT Automatic console positioning system EPS Pendulum machining with two working areas ATS-HTS-EPS work table Liquid-cooled 5-axis milling spindle Drilling head BH 26 Nut sawing units for X and Y directions Chain tool changer 6 UNICLAMP clamping systems Motorized conveyor belts for chips and machining waste BECKER vacuum pump Numerous vacuum suction cups Numerous HSK-63 tool holders 2 large saw blades in the tool magazine

Condition: used, Year of construction: 2006, HOMAG OPTIMAT BOF 211 / VENTURE 12XL, manufactured in 2006. 4-axis CNC machining center with a moving table, water-cooled main spindle, HSK-F63 tool holder, 30-position chain-type tool changer, and drilling head with 12 vertical drilling spindles. Control system: HOMAG powerControl PC85, woodWOP 7.2, updated operator panel with Windows 7. Dcedpfx Aqe Ahzqhovep Scope of supply: Vacuum pump, clamping devices and edge clamps, selection of vacuum cups, as well as ceiling/projection laser. Not included: Machining and adapter units, tools, and lifting conveyors. Inspection by appointment only. Price upon request.

Condition: used, Year of construction: 2012, HOMAG BOF 211/52/AP with TBA 330, manufactured in 2012. Dcedpfx Aqe Ahzqdjvjp CNC machining center with automatic loading and extensive clamping devices. Scope of delivery: - Flex5 Plus (Flex5+) - Lock case unit - Four-spindle unit - 10 multi-clamps - All vacuum cups present for the machine, including the loose cups - TBA 330 loading system Known service points: partially defective safety step mats; one drilling spindle on the MPU drilling head remains extended; the filter on the vacuum device is missing or has fallen into it. Sold in the condition as described. Available for dismantling from February 17, 2027. Inspection by appointment. Price on request.

Condition: used, Year of construction: 2007, Morbidelli / SCM Author X5 44 EVO, manufactured in 2007. 5-axis CNC machining center with a console table and vacuum clamping system. Working area X × Y during milling: 4,400 × 1,780 mm Console depth: 1,500 mm Dcjds Ahzqajpfx Aqvsp Milling and drilling operations Tool magazine and automatic tool changer Separate control panel with screen and handheld device Vacuum pump Machine weight according to the nameplate: approx. 5,000 kg Xilog Plus 1.13.988, as shown in a screenshot from 2023. Expected availability from December 2026. Images from 2023 and April 2026; PC/software photos and video recordings from 2023. Scope of supply and viewing by appointment. Price upon request.

Condition: used, Year of construction: 2014, CNC machining center Manufacturer: Homag Type: BMG 512 Year of manufacture: 2014 Technical data - Working area X: 7575 mm - Working area Y: 1900 mm - Working area Z: 300 mm - Independent Z axes: 2 - Number of milling spindles: 2 - Liquid-cooled milling spindle - Main motor: 18.5 kW - Maximum speed: 24,000 RPM - 5-axis spindle - Tool clamping system: HSK-F63 - Tool changing stations: 39 - Pick-up changing station - Rotary tool changer, 10-position and 18-position - Number of consoles: 12 - 1 vacuum pump, 300 m3/h Dcsds Ahyhpepfx Aqvop - Control system: powerControl PC85, Homag power Touch - Software: Homag WoodWop 6.1 Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: good (used), Busellato Jet 5 XL 2 electrospindles Dsdpfx Aqj Ahwr Uevecp 2 tool changers Working area: 5630 x 1890 mm

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 22.07.003.23, power: 11.5 kW (15.64 HP), overall weight: 3,490 kg, Equipment: saw blade guard, Felder Format 4 KA3232C Machine Number 22.07.003.23 Year of Construction 2023 Cutting length 3.200 mm Pusher stroke 3.200 mm Number of grippers 6 Feedrate max 40 m/min Continuously variable feed Saw blade projection 67 mm Saw blade diameter max 320 mm Main motor power 7,5 kW Scoring saw Yes For sensible workpiecesClamping pressure adjustable Stop side Left Control Touchscreen Dsdpfx Ae Ahumpeqvjcp CE mark Total connection 11,5 kW Weight 3.490 kg Space requirement Length 6,47 m Space requirement Width 5,3 m Space requirement Height 1,8 m

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, operating hours: 30,600 h, input voltage: 400 V, input current: 25 A, input frequency: 50 Hz, workpiece length (max.): 2,900 mm, workpiece width (max.): 1,200 mm, workpiece height (max.): 110 mm, number of slots in tool magazine: 8, total height: 2,500 mm, total length: 5,500 mm, total width: 2,500 mm, overall weight: 2,900 kg, table length: 2,700 mm, table width: 1,200 mm, year of last overhaul: 2024, Equipment: CE marking, documentation/manual, This 3-axis SCM TECH Z25 PLUS H-R4 was manufactured in 2005. It has a working area of 2700 x 1200 mm and a travel range of 2980 mm on the X-axis, 1280 mm on the Y-axis, and 200 mm on the Z-axis. The machine is equipped with 16 spindles operating at 4000 rpm and an electric spindle with a maximum speed of 18,000 rpm. If you are looking for high-quality CNC processing capabilities, Dsdpfx Ae Ahukijqvscp Programmable speeds: X 25 m/min / Y 30 m/min / Z 22.5 m/min Vector speed: 40 m/min Drilling unit: 16 spindles, 4000 rpm, 2.2 kW (10 vertical + 6 horizontal) Main spindle: HSK-63 Tool magazine: FAST CHANGE 4 POSITION Tool magazine: BACK CHANGE 4 POSITION Machine Height: 2680 mm Machine Length: 5570 mm Machine Weight: 2900 kg Machine Width: 2500 mm Number of Axes: 3 Spindle Power: 6.6 kW Spindle Speed: 18000 RPM X-axis Travel: 2980 mm Y-axis Travel: 1280 mm Z-axis Travel: 200 mm

Condition: used, Year of construction: 1999, CNC machining center Manufacturer: Homag Type: BAZ 31/60/K Optimat Year of manufacture: 1999 Technical data - Workpiece length Dodps Ahmz Defx Aqvecp max. 6600 mm with single workpiece placement max. 2700 mm with alternating workpiece placement - Workpiece width max. 1200 mm - Workpiece thickness with edge max. 60 mm without edge max. 60 mm with standard clamp without edge max. 120 mm with clamping template when chamfer milling min. 12 mm when radius milling min. 2x radius + 10 mm - Working height, lower edge of workpiece 950 mm - 2 vacuum pumps, each with 66/100 m3/h for clamping system Main spindle 12 kW, water-cooled - for HSK F63 - Three-phase asynchronous motor 12 kW at S1, 600 Hz - Speed range: 1500 - 18000 rpm - Tool weight max. 6 kg incl. tool holder Tool changer, 12 positions - for tools and aggregates with HSK F63 - 12 x diameter max. 130 mm or - 6 x diameter max. 180 mm and 6 x diameter max. 70 mm - Tool diameter for grinding tools max. 200 mm Aggregate interface BAZ for main spindle For accommodating the machining and gluing aggregates with integrated pneumatic-electrical-electronic supply and pivoting drive, C-axis. Swiveling range without limitation. Hose-free compressed air supply. Drilling head with 17 spindles - 1 motor 1.9 kW, frequency-controlled - Speed selectable via program 4500/6500 or 8000 rpm - Each spindle can be activated individually - Arrangement of spindles in T-shape. - 11 spindles in X-direction, 7 spindles in Y-direction Homatic control system CNC programming system WOODWOP Postprocessor Programming based on CNC drawing Laser positioning aid for vacuum clamping system Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: excellent (used), IMA BIMA QUADROFORM C80/280.01 – Industrial CNC Machining Center For sale: an industrial CNC machining center manufactured by the German company IMA Maschinenfabrik Klessmann GmbH, model BIMA QUADROFORM C80/280.01. Identification data: Manufacturer: IMA Maschinenfabrik Klessmann GmbH Model: BIMA QUADROFORM C80/280.01 Year of manufacture: 1996 Serial number: 20550 Type: industrial CNC machining center Purpose and capabilities: The center is designed for the industrial machining of furniture components and wood-based materials. Typical operations performed on this type of machine: Dcjdpfx Aqj Ahlzaovop milling, drilling, grooving, contour machining, sizing of components. Equipment visible in the photos: structure and working unit of the CNC center, worktable with material clamping elements, machining units and working heads, control cabinet, operator panel. Technical condition: The machine is in good working order. The equipment can be inspected on site. The sale includes the machine with the equipment visible in the photos.

Condition: used, Weeke Venture 06M machining center Dcjdpfx Ae Ahiuhjqvsp X-axis: 3130mm Y-axis: 1250mm Z-axis: 85mm 18 drilling heads (12 vertical and 6 horizontal) HSK milling spindle, 9kW 8-position tool magazine Grooving saw Machine available immediately. Loading included in the price.

Condition: new, Year of construction: 2026, Specifications Working area: X 2100mm Y 3100 mm, X 2100mm Y 4100 mm Dsdo Ahiblepfx Aqvscp Z-axis range: 300 mm Table type: slatted, vacuum Vacuum sections: 6 manually controlled sections Drives: 1.5 kW Servo AC Ethercat Travel speed: up to 40 m/min Control system: Industrial controller, Ethercat communication with remote access Electro-spindle set: 9 kW Tool clamping: ISO30 collet Tool magazine: 12 positions Tool length sensor: YES Positioning bases: 5 pcs Dust extraction foot: with outlet for connecting a dust extraction system/vacuum cleaner Manipulator: manual, wired Cooling mist: YES Central oil lubrication: YES CAD/CAM software: YES Access enclosure: including a laser safety curtain Additional options: Vacuum pump or side-channel blower Different electro-spindle powers Different working table size Push-and-dust extraction bar Revolver magazine Oscillating knife head 4th axis, angular heads Drilling units

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, 5-axis machine with a table length of 4,469 mm in the X-axis and 1,560 mm in the Y-axis, including 2 tool changers. Working dimensions: X-axis: 4,469 mm Y-axis: 1,560 mm Z-axis clearance: 180 mm Work table: Dsdj Agu Akepfx Aqvjcp 8 workpiece supports 8 rear workpiece stops, programmable, installed in each support 8 middle workpiece stops, programmable, installed in each support, positioned approximately 520 mm from the rear 1 + 1 lateral workpiece stops Lifting rails, pneumatic, programmable, for positioning heavy workpieces Vacuum pump 250 cbm/h Equipment for machining head: Drilling head with: 18 vertical drilling spindles, each individually controllable 2+2 horizontal drilling spindles in the X-direction 2+2 horizontal drilling spindles in the Y-direction Fixed nut saw in the X-direction 5-axis milling spindle 11 kW, HSK 63 F Rotational speed 1,000 - 24,000 rpm Bidirectional rotation Saw blade diameter, max. 300 mm Tool magazine, 12 positions, mounted on the machining support, moving in the X-direction Tool magazines, 10 positions, mounted laterally on the machine table on the left side Safety devices: * Support equipped with a bumper system * Protective fence on the side, rear, and left with an access door Control system: XILOG MAESTRO Without tools and aggregates Additional equipment: * Handheld terminal for controlling basic functions, such as manual movement, feed rate, and milling spindle speed

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, working width: 1,050 mm, working height: 100 mm, working length: 3,250 mm, TECHNICAL DETAILS Working length: 3,250 mm Working width: 1,050 mm Dcodpfxe Aggu Aj Aqvjp Working height: 100 mm Drilling unit Vertical drilling spindles: 18 Horizontal drilling spindles, X-axis: 4 Horizontal drilling spindles, Y-axis: 2 Tool stations: 4 Position: rear MACHINE DETAILS Milling spindle power: 7.5 kW Operating voltage: 400 V Mains frequency: 50 Hz EQUIPMENT Grooving circular saw for X and Y direction, 90° Rear tool changer CE marking

Condition: good (used), Year of construction: 2024, functionality: fully functional, Biesse ROVER C 1982 CNC Machining center (5-axis) Description; Working fields X = 8125 mm; Y =1950 mm Z= 470/500 mm UPS Closed chain cable holder X-axis 12 ATS Panel supports 48 sliding bases Pneumatic locking system in 2 work areas in X 8 aluminium lifting bar supports for loading ease of large and heavy pieces. 290 m3/h rotary claws vacuum pump Vacuum module - Size 132x146 - H74mm Vacuum module - Size 132x75 - H74mm Vacuum module - Size 132x54 - H74mm Belt conveyor for the removal of chips and off-cuts 21.6 kW (29.4 HP) operating unit with 5 interpolating axes HSK F63 adaptor and liquid cooling Suction hood with continuous positioning in Z controlled by NC Air-Jet cooling system Liquid chilling unit for liquid cooled systems Chain tool changer with 22 places at 180 mm centerdistance Strengthened gripper Dcsdpfx Aqj Af Ii Novep PC bTouch Presetter for the measurement of the tool length with diameter up to 130 mm bSolid 3D CAD-CAM program Additional license for bSolid Additional filter for vacuum pump SOPHIA - IoT Connection Roller lifting support in replacement of the standard one Enlargement of mesh guards and movement of the doors from front side to rear side to load profiles with length up to 11 meters (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2002, functionality: fully functional, 4-axis machine with WOODWOP 4.5, from a carpentry workshop Working dimensions: X-axis 3,200 mm Dcjdpfxo Afh Izj Aqvjp Y-axis 1,250 mm Work table: 6 pcs workpiece supports, each with 3 vacuum cups 4 pcs lifting rails for heavy workpieces 1 rear and 1 front stop row Vacuum pump 100 m³/h Tool arrangement: Main spindle 7.5 kW HSK 63 F with water cooling Speed 1,500 - 18,000 rpm with C-axis / positioning axis for adapter tools Drilling unit with 18 vertical spindles 6 drilling spindles horizontally Dado saw unit fixed in the X-direction Tool changer magazine, 8 positions, mounted at the rear of the support, moving in the X-direction, for milling tools and units Control: HOMATIC 2000 with WOOD WOP 4.5 Safety equipment: ----- * Foot mat protection in front of the machine Without tools

Condition: good (used), Year of construction: 2013, machine/vehicle number: 0-201-24-0260, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance Z-axis: 600 mm, workpiece length (max.): 4,200 mm, workpiece width (max.): 2,075 mm, number of slots in tool magazine: 18, controller manufacturer: HOMATIC, controller model: PC85, spindle motor power: 15,000 W, Equipment: CE marking, documentation/manual, Machine with shuttle console tables and 5 interpolating axes. Dcsds Afabaopfx Aqvop Workpiece length X max. (all units) - max. 4200 mm for single workpiece - max. 2040 mm for alternating workpiece Workpiece length max. (with gluing unit) - max. 4200 mm for single workpiece - max. 1850 mm for alternating workpiece Workpiece width Y max. (all units) - max. 1850 mm Workpiece width Y max. (milling cutter D=25 mm) - max. 2075 mm 2 individually movable console clamping tables automatic console and suction cup positioning - 4-way arrangement possible - 8 movable consoles (4 per table) with 1 stop at the front each - Console length 2050 mm - 4 lifting rails - Side stops 4 x left, 4 x right (mirrored) - 1 vacuum circuit per table - 2 vacuum pumps, 140 m3/h each - Chip conveyor belt - Chip auger conveyor Equipment / Units: - Milling spindle 15 kW, liquid-cooled - Tool changer, 18-position disc - C-axis with electrical interface - 5-axis spindle (fully interpolating) - Drilling unit 2.7 kW, 20 spindles vertical / 10 spindles horizontal - Swiveling sawing/drilling unit - Sawing unit D=1200 - 16 pcs. suction cups 160x115 mm - 8 pcs. suction cups 125x75 mm Control / Software: - Control system PC85 - WoodWop 5.1 - Wood Design Package - CAD plugin - DXF import - Schuler MDE Available from week 46/2026

Condition: used, Year of construction: 2019, functionality: fully functional, operating hours: 3,900 h, workpiece length (max.): 4,320 mm, workpiece width (max.): 1,620 mm, number of axes: 5, overall weight: 4,500 kg, !!Decide quickly and secure a bargain!! Dcedpfx Aqo Afaapovop Technical specifications: Year of manufacture: 2019 Operating hours: approx. 3,900 Working area X / Y: 4,320 × 1,620 mm 8 consoles with automatically adjustable vacuum cups Triple zero line in Y (total of 3 stop points) 5-axis HSD milling spindle with liquid cooling Separate drilling head with grooving units in X and Y Automatic tool changer with two tool magazines Control station with screen and manual control unit NC HOPS software, version 7.5 Machine weight: approx. 4,500 kg Includes a wide range of tools, frame clamps, suction cups, and accessories!

Condition: used, Year of construction: 2016, CNC machining center Manufacturer: Biesse Type: Rover A1432 Year of manufacture: 2016 Technical data 3-axis machine HSD drilling head - Maximum motor speed: 6,000 rpm - Vertical spindle travel: 60 mm Djdpe Ad Iw Tsfx Aqvscp - Horizontal spindle travel: 75 mm - Spindle bore: 10 mm - Saw blade diameter: 80-120 mm Drive power: 17.3 kW Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is non-binding.

Condition: used, Year of construction: 2016, CNC machining center Manufacturer: Biesse Type: Rover A 1643 Year of manufacture: 2016 Technical data - 5-axis machine - Working area X/Y: approx. 4320 - 1620 mm Main spindle - Rated current: 14 kW - Power, short-term: 16 kW (S2 1 min.) - Maximum speed: 20,000 rpm - Tool clamping system: HSK-F63 - Cooling: as liquid - Operating mode: S1 continuous operation Drilling unit - Maximum motor speed: 6000 rpm - Vertical spindle stroke: 60 mm Dcedpfxe Ad Iw He Aqvjp - Horizontal spindle stroke: 75 mm - Spindle bore: 10 mm - Saw blade diameter: 80 - 120 mm Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2005, CNC Machining Center Manufacturer: IMA Type: BIMA 300 Year of manufacture: 2005 Technical data Work area - Machining area X-axis: 4,300 mm - Machining area Y-axis with main spindle and 20 mm tool: 1,400 mm - Machining area Y-axis with drilling unit (all vertical drilling spindles): 1,100 mm - Max. clamping height above the vacuum suction surface: 125 mm - Max. workpiece thickness: depends on equipment and application - Working height: approx. 950 mm - Two-zone work area without pendulum machining: 2 x 2,050 mm - Average clearance without pendulum machining: 200 mm - Two-zone work area with pendulum machining: 2 x 1,750 mm - Average clearance with pendulum machining: 800 mm Main spindle - Spindle power: 7.5 kW - Tool holder: HSK-F63 - Taper diameter: 38 mm - Automatic tool clamping - Clamping force: 11,000 N - Release force: 20,400 N - Max. tool weight: 6 kg - Spindle speed: continuously variable, 1,500 - 18,000 rpm - Direction of rotation: programmable, clockwise and counterclockwise - Drive: Three-phase motor with frequency converter - Spindle lubrication: permanently lubricated at the factory - Spindle cooling: air-cooled - Integrated CNC rotary axis for tool positioning over 360°, with torque support and pneumatic connection Axis speeds - Max. rapid traverse X-/Y-axes: 60 m/min - Max. rapid traverse Z-axis: 30 m/min Vacuum, extraction, and compressed air - Required compressed air pressure: 7 bar - Extraction port diameter: 250 mm Dsdpfxj Adyhwj Aqvscp - Required extraction air velocity: 28 m/s - Required extraction volume flow: 4,950 m³/h - Vacuum pump capacity: 90 m³/h Dimensions and weight - Machine length: approx. 5,750 mm - Machine width: approx. 3,830 mm - Machine weight: approx. 6,000 kg Accessories - 90-degree angle drilling unit - 3 x HSK tool holders Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Working area X: 4300 mm Working area Y: 2205 mm Z-axis workpiece passage: 250 mm 1 x 19.2 kW 4-axis electrospindle, HSK F63 connection 1 x 19.2 kW 3-axis electrospindle, HSK F63 connection Dcsdpfx Ao Abawgeqvjp 8-position turret-type tool changer “FT” work table with grid Software: Biesse bSolid 3 vacuum pumps Cooling system Special extraction hood with 2 extraction connections Safety guards

Condition: used, Year of construction: 2013, functionality: fully functional, CNC machining center Biesse Rover A 4.30 with accessories and tools, see photos. Year of manufacture 2013, fully equipped and in perfect working order. Includes a lock box unit, saw unit, and disc changer with 24 positions. Includes Palettcad software. From an insolvency, therefore no further technical data available. Please submit a bid. Dcodpfx Aqo Aaz Svevop Location: Freising. Inspection is welcome. We have other used machines available. Simply contact us.