AGRAVIS Technik Center GmbH

Condition: ready for operation (used), Year of construction: 2006, operating hours: 27,713 h, travel distance X-axis: 1,100 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,250 mm, controller manufacturer: SIEMENS, controller model: 840D, total height: 4,000 mm, total width: 6,000 mm, table load: 1,500 kg, overall weight: 12,000 kg, spindle speed (max.): 7,500 rpm, spindle motor power: 50,000 W, number of slots in tool magazine: 144, tool weight: 60,000 g, product length (max.): 6,000 mm, number of axes: 4, This 4-axis Burkhardt-Weber MCX750 M1 was manufactured in 2006. It features an impressive X-axis travel of 1100 mm, Y-axis travel of 900 mm, and Z-axis travel of 1250 mm. The machine has a maximum pallet load of 1500 kg and a magazine capacity of 144 positions. The machine is linked to a Burkhardt-Weber MCX750 M2 (2011) and a pallet magazine and set-up station (12 positions + 2 positions per machine + 2 set-up stations) Contact us for further details. • Maintenance contract: Yes Rcodpfx Adszxfz Uszjf • Utilization: 70% • Shifts: 2 • Pallet size: 800 x 800 mm • Drive power: 50 kW • Maximum torque: 1650 Nm • Number of revolvers/magazines: 1 • Magazine capacity: 144 positions • Maximum tool length: 750 mm • Maximum tool diameter: 350 mm • Operating hours: 27713 h Additional equipment • OPTIONAL: Tooling package • Group 1: approx. 700–750 tools (Ø up to 124.9 mm) • Group 2: approx. 100–150 tools (Ø 125–224.9 mm) • Group 3: approx. 50 tools (Ø 225–350 mm)Recent replacement of the X-spindle and the rotary seal on the IKZ (internal cooling through spindle)Geometry readjusted(done by official Burkhardt-Weber)The machine is linked to a Burkhardt-Weber MCX750 M2 (2011) and a pallet magazine and set-up station (12 positions + 2 positions per machine + 2 set-up stations) Technical Specification Taper Size SK 50

Condition: good (used), Year of construction: 2016, functionality: fully functional, Currently, a machine overhaul is being carried out with a value of €90,000. Maho DMF 260 -7 / 5-axis machining center Year of manufacture 2016, Rsdpfx Aezxfz Ijdzecf Control system: Heidenhain ITNC 530, Travel range X/Y/Z: 2600/700/700 mm, Fixed table with integrated NC rotary table, B-axis in the milling head, infinitely adjustable, Spindle speed up to 14,000 rpm, Tool holder: HSK A63, Coolant: 60 bar, Coolant pressure: 40 bar, Paper band filter, 3D measuring probe Heidenhain TS 649, 3D Quickset, Machine protection control, Electric handwheel, 3D data model.

Condition: good (used), functionality: fully functional, machine/vehicle number: ZCFC872F305561546, mileage: 75,141 km, power: 152 kW (206.66 HP), first registration: 01/2024, fuel type: diesel, empty load weight: 4,833 kg, maximum load weight: 2,367 kg, overall weight: 7,200 kg, tire size: 225/75 R 16, axle configuration: 4x2, wheelbase: 5,100 mm, fuel: diesel, fuel tank capacity: 90 l, color: white, driver cabin: day cab, gearing type: automatic, suspension: steel-air, number of seats: 3, loading space volume: 35 m³, loading space length: 6,320 mm, loading space width: 2,510 mm, cooling unit manufacturer: Carrier, cooling unit model: Pulsor 400MT, Year of construction: 2023, Equipment: ABS, EBS, air conditioning, cruise control, electronic stability program (ESP), lane keeping assist, navigation system, power assisted steering, seat heater, traction control, our vehicle number #30972 Local transport vehicle Euro VI 206 hp 4x2 Wheelbase 5,100 mm Suspension BL Tire size 225/75 R 16 Permissible total weight 7,200 kg Payload 2,367 kg Unladen weight 4,833 kg Body dimensions i.L. L: 6,320 mm W: 2,510 mm H: 2,250 mm V: 35 m³ Tank size 90 liters Color white Differential lock Transmission automatic Air conditioning Cooling unit Carrier Pulsor 400MT Low noise Tail lift BÄR (1,500 kg) with roll-off safety Disc brake Cruise control Traction control Multi-chamber freezer box Longitudinal partition 2x additional evaporator on the right Variable transverse partition on the right Partition at the rear, transversely adjustable Driving and electrical cooling Temperature recorder Rjdpfx Aozxfwvsdzecf Electric windows 2-fold Electric exterior mirrors/heated ACC adaptive cruise control AEBS emergency braking assistant LDWS lane departure warning system Reversing camera Radio Hi-Connect with navigation ESP STS freezer box, year 2023 Gerstenkorn flooring Central locking with remote control DPF LED headlights LED daytime running lights Fog lights Side marker lights Bluetooth hands-free system Light/rain sensor Tire pressure monitoring system Driver airbag LED interior lighting, body City Brake On-board computer Leather multi-function steering wheel 2 doors on the right + 1 door on the left 2 sliding vents on the left 2 rows of anchor rails Roof spoiler Luxury driver's seat/heated Double bench seat on the right Financing possible upon request!!!

Condition: used, Year of construction: 2014, functionality: fully functional, INTERMAC VERTMAX 2.6 – Year 2014 Vertical CNC machining center Maximum machinable sheet size: 5000 x 2600 mm Minimum machinable sheet size: 500 x 300 mm Machinable glass thicknesses: 3 - 25 mm Suction cup carriage speed: 80 m/min Y-axis speed: 40 m/min Rjdpfxszxfvle Adzjcf Speed of glass feed on input and output roller modules: 30 m/min Electrospindle power: 2 x 6.5 kW Maximum spindle rotation: 12000 rpm Maximum diameter of the front head grinding wheel: 150 mm Maximum diameter of the rear head grinding wheel: 100 mm Maximum drill diameter: 80 mm Tool coupling: ISO 40 Tool magazine positions: up to 14 + 15 Maximum power required: 63 kW Operating hours: 10899

Condition: used, Ishida DACS W 030 SB WP I N CTS Checkweigher with Metal Detector This compact, space-saving Ishida checkweigher, combined with a CEIA metal detector, is ideal for checking products for contamination and ensuring correct weight. This in-line combination offers exceptional speed and accuracy. The system is equipped with a CEIA THS metal detector, which detects both ferrous and non-ferrous metals. The Ishida checkweigher then verifies the product weight. The combination features pneumatic rejectors that automatically remove products with incorrect weight or detected contamination. The checkweigher is entirely constructed from stainless steel. Checkweigher: Ishida DACS-W-030-SB/WP-I-N(CTS) Metal detector: CEIA THS(SL) Rodpfszxfvfsx Adzjcf Technical specifications: Production capacity: 210 weighings/min Weighing range: 125 g – 3,300 g Graduation: 1 g Working width: 300 mm Package dimensions: Length: 80–500 mm / Width: 30–300 mm / Height: 10–300 mm Infeed and outfeed height: 960 mm Voltage: 230 V (1+N, 50 Hz) Year of manufacture: 2006 Weight: 250 kg Machine dimensions (W × D × H): 2,160 × 860 × 1,560 mm

Condition: ready for operation (used), Year of construction: 2021, Optimizing Cross-Cut Saw manufactured in 2021. This OPTIMA 60SNC 6200 CE features a maximum workpiece height of 110 mm and a width of 300 mm, with an impressive infeed length of 6,200 mm. It offers a feeding speed of 60 m/min and a saw blade diameter of 450 mm. If you are looking to get high-quality cutting capabilities, consider the OPTIMA 60SNC 6200 CE machine we have for sale. Contact us for further details. • Max. workpiece height: 110 mm • Max. workpiece width: 300 mm • Max. infeed length: 4,200 / 6,200 mm • Max. feeding speed: 60 m/min • Saw blade diameter: 450 mm (optional up to 500 mm) • Saw motor power: 4.6 kW • Feeding motor power: 0.75 kW • Cutting cycle time: approx. 0.5–1 sec • Average production capacity: approx. 15–20 cuts/min • Positioning accuracy: ±0.15 mm (depending on configuration) • Connectivity: USB and Ethernet (RJ45) • Applications: Automatic and programmable cutting of profiles, timber, plastics and similar materials • Features: Programmable cutting lists and batch cutting capability Additional equipment Rsdpfjzxfu Usx Adzscf • Pneumatic rear clamp • Horizontal clamping system

Condition: excellent (used), Altendorf F45 Elmo sliding table saw Table length: 320 cm, Motorized tilt adjustment in both directions, Motorized blade height adjustment, Motorized fence adjustment on the right side, up to 1125 mm, Electrically adjustable 2-axis scoring saw, Rcodezxfunopfx Adzof Main motor: 5.5 kW, speed controlled by a frequency inverter, Maximum blade diameter: 450 mm.

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 02/2019, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, wheelbase: 8,940 mm, color: white, Year of construction: 2019, Equipment: tail-lift, Axle configuration Make axles: BPW Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 6.756 kg Carrying capacity: 34.244 kg GVW: 41.000 kg Functional Tail lift: Dhollandia DHSMR.30, slider lift, 2500 kg Rsdpfx Adszxft Dszecf Maintenance, history and condition APK (MOT): tested until 02/2027 Technical condition: very good Visual appearance: very good Identification Registration number: OR-31-TJ Additional information Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension - Disc brakes - EBS = Remarks = Krone SD / Tautliner / Boorden / BPW + Disc Brakes

Condition: good (used), functionality: fully functional, Year of construction: 2009, operating hours: 8,549 h, lifting height: 6,500 mm, free lift: 2,300 mm, fuel type: electric, mast type: triplex, construction height: 2,890 mm, battery capacity: 778 Ah, battery voltage: 80 V, fork length: 1,200 mm, overall weight: 5,300 kg, total height: 2,890 mm, total length: 3,800 mm, total width: 1,200 mm, Equipment: 4th hydraulic function, lighting, sideshift, €11,000 net Jungheinrich EFG 430 electric forklift Rcsdpfjzxfn Uox Adzjf Year of manufacture: 2009 Operating hours: 8,549 h Year of battery manufacture: 03/2022 Battery capacity: 775 Ah at 80 volts Load capacity: 3,000 kg Lifting height: 6,500 mm; of which approx. 2,300 mm free lift Overall height: 2,890 mm Overall dimensions approx.: 1,200 mm wide; 3,800 mm long Weight approx.: 5,300 kg including battery Fork length: 1,200 mm Including charger Work lights at the front and rear Side shifter 4th hydraulic valve still available The machine is in perfect working order and ready for immediate use. Affordable delivery by a specialist company is possible. Please also check out our other listings. We constantly have many more high-lift and low-lift trucks and forklifts in stock. Do you need spare parts for your forklift, high-lift truck, etc.? Simply contact us. ID: 80-396280

Condition: used, Hydraulic power unit, Bosch Rexroth complete industrial hydraulic power pack with 15 kW Siemens motor, HYDAC oil cooler and WOERNER control system, Used Machine MAIN MOTOR AND PUMPS: Rcedpfxozxfnzo Adzof Main drive motor: SIEMENS 15 kW (3~ Mot. 1LA7166-4AA61, 400/690 V, 1460 rpm, IP55, 99 kg) Rexroth main pump: A10VSO 28 DFLR/31R-PPA12N00 (250 bar, Vg = 28 cm³/rev) Rexroth 2nd pump: PGH5-21/080RE11VE4 (80 cm³/rev, internal gear pump) Rexroth 3rd pump: PGH2-22/006RR07VU2 COOLING AND FILTRATION: Oil cooler unit: HYDAC SA Cooling Systems (SCA 3L/40/2.0/M/A/1, max. 6 bar) Cooling circuit pump: HYDAC SYSTEM KFZP-3+4/3.0/P/90/40 (G 1 1/4") Cooling fan motor: A.O. SMITH 5.5 kW (400 V, IP55) Filter housing: REXROTH pressure filter housing (25 bar, 16.7 litres) CONTROL SYSTEM AND TANK: Temperature controller and display: WOERNER KTR-B/3/V300/T5/T5/TA (IP65) Hydraulic tank: Robust steel hydraulic oil tank with oil level indicator and inspection/cleaning opening. OVERALL DIMENSIONS: Width: 1700 mm Depth: 1300 mm Height: 1650 mm

Condition: used, mileage: 347,850 km, power: 390 kW (530.25 HP), first registration: 11/2020, fuel type: diesel, empty load weight: 8,149 kg, overall weight: 205,000 kg, tire size: 385/65 R22,5 - 315/80 R22,5, wheelbase: 3,800 mm, brakes: retarder, color: grey, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6d, suspension: steel-air, Equipment: ABS, AdBlue, EBS, additional headlights, cruise control, differential lock, electronic stability program (ESP), lane keeping assist, navigation system, onboard computer, parking air conditioner, parking heater, retarder, traction control, Urea tank (AdBlue) Engine displacement: 12,902 cc Hydraulics (auxiliary drive) Tilting hydraulics Distance warning system Low noise Full cab enclosure Payload: 12,351 kg Automatic climate control Air-suspended cab Sun visor Light bar Rotating beacon 2 bunks Air horns Rcodezxfh Iepfx Adzsf Cooler box Errors and omissions excepted.

Condition: reconditioned (used), functionality: fully functional, input voltage: 400 V, overall weight: 127 kg, warranty duration: 6 months, temperature: 140 °C, NILFISK ALTO NEPTUNE 3-33X HOT WATER WASHER BUILT-IN HOSE REEL The device features new accessories, including a German R+M gun, stainless steel lance, steel-braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. Rsdpfxszxfhze Adzocf A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 160 bar and up to 650 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Power supply voltage [V]: 400 ~3 phase Pumping capacity [l/h]: 650 Working pressure [bar]: 160 Max. Heating temperature [°C]: 100-140 Connection power [kW]: 4.5 Fuel tank [l]: 16 Cleaning agent tank [l]: 10 Hose length [m]: 20 Weight [kg]: 127 EQUIPMENT: BUILT-IN HOSE REEL NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 20m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Built-in chemical tank allows for dosing of cleaning fluid directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service

Condition: used, functionality: fully functional, mileage: 254,160 km, power: 368 kW (500.34 HP), first registration: 09/2023, fuel type: diesel, overall weight: 8,287 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Cruise Control: I-See. Map based topography information. Globetrotter XL Cab, extra high sleeper. Single energy battery system (2 batteries). D13K500 diesel engine, 500hp, 2500Nm SCR and EGR. EURO 6. I-Shift Automated 12-speed - GCW 60 tonne. Standard transmission shift - I-Shift or Powertronic. Volvo Engine Brake - Retardation D13K-375kW/D16-500kW. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Electrically controlled air conditioning with sun sensor. Comfortable, suspended driver seat with belt. Comfortable suspended Passenger seat with seatbelt mounted in seat. Height adjustable foldable top bunk 700 x 1900mm. Lower bunk 815mm wide in the centre. Aux. cab heater: 1.8kW Air to air. 33 litre under bunk mounted fridge / freezer with dividers. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Front tyres - 315/60 R22.5. Rear tyres - 315/60 R22.5. SAF-Holland/+GF+ SK-S 36.20 cast fixed fifth wheel. Wheelbase 3800 mm. 650 litre, left side fuel tank with steps. 65 litre AdBlue tank under/behind cab. 610 litre, right side fueltank. Speed limiter setting 90 km/h - 56mph. Technology Secondary colour information display. FMS gateway for Fleet Management System. Exterior LED headlamps. Static corner lights - works with indicator at low speed to light up direction. Front fog lights - white. Rcodpfxszxfhnj Adzsf Tyres Information Front left - 15 mm Front right - 15 mm Rear left inner - 19 mm Rear left outer - 19 mm Rear right inner - 19 mm Rear right outer - 19 mm

Condition: excellent (used), Year of construction: 2009, clamping force: 3,000 kN, screw diameter: 65 mm, clearance between the columns: 710 mm, injection pressure: 2,070 bar, injection weight: 981 g, mold height (min.): 225 mm, Clamping Unit • Clamping force: 3000 kN (300 t) • Distance between columns: 710 x 710 mm – special design, increased distance compared to the standard version • Mold height: min. 225 mm / max. 1125 mm • Opening stroke: 900 mm • Maximum distance between mounting plates: 1125 mm • Mounting plate size: 1030 x 1020 mm (920 mm) • Special hole pattern in the clamping plate and nozzle plate – made to order • Manual device for removing the upper column, with a removable cover in the front guard and a wrench for the column nut Injection Unit • Injection unit 2250 • Screw diameter: 65 mm, L/D ratio 22.0 • Shot volume: 1078 cm3 • Maximum injection weight (PS): 981 g • Specific injection pressure: 2070 bar • Equipment package: wear and corrosion-resistant plasticizing unit, adapted for processing PP and PPSU, diameter 65 mm • Hart-PVC package: without internal screw cooling, with external cylinder cooling instead of standard design • High-temperature heating bands for a working temperature of 450 °C • 8 standard open nozzles, plus: 4 for the PVC cylinder and 4 for the PP cylinder, through holes 4, 8, 10, and 12 mm • Wrench for screw tip for a 65 mm diameter UNILOG B6S Control System - Upgrade package • Controller with increased computing power • APS and cycle time analysis • Four freely configurable network connections • Userpage and notepad • Real-value graphics with 16 curves • Event log depth: 10,000 events • Quality table memory depth: 10,000 events • Four envelope curves, foil function keys • SPC evaluation and trend charts • Injection, holding, and back pressure controlled by a servo valve Hydraulics and Hydraulic Cores • Core movement and parallel ejection are performed by an additional DFEE pump, size 71, flow rate 95 l/min • 4 x hydraulic core for the clamping plate NW 10 (on/off valve), interfaces according to EUROMAP 13, with active ejector plate protection Rodpszxfg Rsfx Adzjcf • Cores mounted on the upper side of the clamping plates, each with connections for two consumers • 2 x core junction box in a special design: 25 3-pole Amphenol plugs, mounted on the clamping plate on the operator side and the rear side, connected in series • 4 x core pressure relief upon emergency shutdown, engine stop, and after pressing the button in setting mode – relief occurs simultaneously for cores on the clamping side and the nozzle side • 4 x twin check valve for NW 10 core • 2 x pneumatic valve for controlling one closing nozzle in the mold or several in parallel (1000 l/min), mounted in the center console at the rear of the machine Mold Heating, Electrical System, and Connections • 12 x temperature control circuit for hot runner or mold heating, power 2.3 kW, 10 A, interface according to HASCO standard (1 x HASCO 24-pole for max. 6 zones) • Mounting location for heating circuits: center console at the rear, near the control cabinet • 2 x Schuko 16 A socket: under the control system and on the clamping side from the rear, under a cover • 2 x CEE 16 A socket: on the injection side from the front and on the clamping side • Dual power supply: 1. power supply 3P+N, 400 V, rated current 140 A, preliminary protection gL-gG 160 A • 2. power supply 3P, 400 V, rated current 98 A, preliminary protection gL-gG 100 A

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: Fusion 640M, table load: 500 kg, overall weight: 5,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, product length (max.): 2,000 mm, number of axes: 3, This 3-axis Mazak VCN-410A was manufactured in 2003. It features an X-axis travel of 560 mm, Y-axis travel of 410 mm, and Z-axis travel of 510 mm. The machine is equipped with a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 30 tools. If you are looking to get high-quality machining capabilities, consider the Mazak VCN-410A vertical machining centre we have for sale. Contact us for further details. • Table size: 900 x 410 mm • Tooling: • Tool changer: automatic, arm type • Max tool length: approx. 350 mm • Feeds: • Rapid traverse X/Y/Z: up to 36 m/min • Dimensions and weight: • Machine dimensions: approx. 2000 x 2600 x 2800 mm Rsdpfx Adozxfcfjzjcf • Machine features/options: • Rigid tapping • EIA/ISO programming • Helical cutting • 3D compensation • Coolant system • Automatic lubrication Technical Specification Taper Size ISO 40

Condition: excellent (used), 5.5 kW motor Table length: 300 cm Scoring unit: 0.75 kW motor Ground clearance: 160 cm Electrically adjustable blade, scoring unit, and base frame. Redezxfbuspfx Adzecf New blades.

Condition: used, Year of construction: 2002, functionality: fully functional, Tapping Machine HAGEN & GOEBEL type HG-6 Year of construction: 2002 Spindle travel: 50 mm External spindle cone: B12 Rotation: from 355 to 1800 RPM Rotation right / left Throat depth: 120 mm BILZ Quick Attach Voltage: 380 V Rcjdpfxszxfbne Adzjf Width: 400 mm Depth: 600 mm Total height: 800 mm Weight: approx 100 kg

Condition: good (used), Lot of diamond grinding tools for jig grinding machines. Some are new and unused, while others are in good condition. Make an offer. See also: HAUSER , MOORE , EXERON , FEHLMANN , KERN ... Rcjdpfxjzxfbho Adzsf

Condition: used, Used stainless steel tank with insulation Article number: 10906 Last use: CIP Volume: 3500 liters Type: Standing on 3 legs Material (in contact with media): 1.4301 / AISI 304 Manhole cover: Ø 500mm Max. operating pressure: ATM Design: with insulation Tank dimensions: Inner diameter: 1720mm Outer diameter: 1900mm Rcodpfszxfbbox Adzof Cylindrical height: 1440mm Overall width: 2000mm Overall height: 2770mm Materials: Inside: 1.4301 / AISI 304 Outer parts: 1.4301 / AISI 304 Features: Outlet diameter: 50mm Height of legs: 600mm Nameplate: yes

Condition: used, Used stainless steel tank Article number: 10905 Last application: CIP Volume: 4150 liters Type: Standing on 4 legs Material (in contact with media): 1.4301 / AISI 304 Manhole cover: Ø 430 mm Max. operating pressure: ATM Design: Single-walled Tank dimensions: Outer diameter: 1600 mm Cylindrical height: 2050 mm Rjdpfozxfawex Adzecf Overall width: 2100 mm Overall height: 2940 mm Materials: Inside: 1.4301 / AISI 304 External parts: 1.4301 / AISI 304 Equipment: Outlet diameter: 60 mm Outlet valve: Butterfly valve Height of legs: 760 mm Nameplate: no

Condition: used, Used pallet racking systems from SSI Schäfer are among the most sought-after solutions for efficient and safe warehousing. This heavy-duty racking system is ideal for warehouses as well as industrial and logistics companies that require sturdy and long-lasting racking for storing Euro pallets. The proven PR600 design offers high load capacity, maximum flexibility, and is perfectly suited for storing goods with high weights. Buying used here means you get certified brand quality at a highly attractive price – immediately available for new construction, redesign, or extension of your existing racking system. Individually adaptable: The frame uprights (Type P120) can be refitted to your desired height – professionally and precisely in our workshop. We deliver tailor-made racking solutions for every storage requirement. PRODUCT DETAILS - Height: approx. 490 cm - Depth: approx. 105 cm - Length: approx. 1410 cm - Shelf load: 3000 / 3500 kg (depending on variant) - Bay width: 270 cm (fits 3 × EPAL pallets) - Beams: 270 cm, Type INP100 or CE110 (box profile) - Beam color: Blue - Frame type: P120, galvanized, pre-assembled - Levels: Floor + 2 - Pallet spaces: 45 incl. floor positions - Design: Used SSI Schäfer PR600 - Availability: Immediately ex-stock, multiple units available INCLUDED IN DELIVERY: - 06 × frames approx. 4.90 × 1.05 m, galvanized, pre-assembled - 20 × beams approx. 270 cm (INP100 or CE110) - 40 × safety pins Rsdpfx Adozxfaqjzjcf Price: 1080.00 € net 1285.20 € gross You will receive an invoice with VAT shown separately. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery throughout Germany by our partner freight company – freight costs dependent on postal code - Professional assembly and disassembly by trained teams available as an option - Rack inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will gladly prepare a non-binding offer tailored to your requirements. Whether for new builds, reconfiguration, or expansion – we provide expert advice for your racking configuration. SHOWROOM: Feel free to visit us at our showroom! On site, you can get a comprehensive overview of our pallet racks, storage racks, and further solutions. Many systems are assembled and can be experienced directly. Our specialist advisors are available for any questions and individual consultations – we look forward to your visit! Haven’t found what you’re looking for yet? Visit our website for a quick overview of many offers & variants of our products! INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone call. You’ll find our phone number on our company page. ☎️ We are available by phone Monday to Friday, from 08:00 to 16:00. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible.

Condition: used, Used stainless steel tank with insulation Item number: 10904 Last use: CIP Volume: 3800 liters Type: Standing on 4 legs Material (in contact with medium): 1.4571 / AISI316 Manhole cover: Ø 500 mm Max. operating pressure: ATM Design: with insulation Tank dimensions: Inner diameter: 1600 mm Outer diameter: 1800 mm Cylindrical height: 1870 mm Overall width: 1950 mm Overall height: 3060 mm Materials: Inside: 1.4571 / AISI316 Outer parts: 1.4301 / AISI 304 Features: Outlet diameter: 65 mm Outlet valve: butterfly valve Height of legs: 375 mm Nameplate: no Rsdpfxezxd U Ts Adzecf

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 06/2022, total length: 11,940 mm, total width: 2,550 mm, total height: 3,830 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 7,850 mm, color: grey, Year of construction: 2022, Equipment: ABS, = Additional Options and Accessories = - Electronic Braking System (EBS) - Rear doors - Air suspension = Notes = Rcodpfx Adszxd U Hjzjf For more information: Mark van der Steen = Further Information = Axle configuration Tire size: 385/65R22.5 Axle brand: SAF CD Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9000 kg; Tire tread depth left: 80%; Tire tread depth right: 80% Rear axle 2: Max. axle load: 9000 kg; Tire tread depth left: 80%; Tire tread depth right: 80% Rear axle 3: Lift axle; Max. axle load: 9000 kg; Tire tread depth left: 80%; Tire tread depth right: 80% Weights Unladen weight: 7,250 kg Payload: 37,750 kg GVW: 45,000 kg Condition Technical condition: very good Optical condition: very good Identification License plate: OT-03-HZ Further information Please contact Mark van der Steen for more information.

Condition: new, Year of construction: 2022, approx. 100.16 running meters, height: 450 cm, shelf load: 3000 kg, pallet racking, heavy-duty racking, high-bay racking, industrial racking, racking immediately from stock Data : - Height : approx. 450 cm - Depth : approx. 110 cm - Length : approx. 100.16 running meters - Load: 3000 kg shelf load - Galvanized uprights - Cross beams 270 x 14 x 5 cm, T30 - Cross beams in orange - New BLT / PR45 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : Rcsdpfjzxd Uyox Adzjf - 037 x upright approx. 450 cm x 110 cm, disassembled. - 144 x crossbar approx. 270 x 14 x 5 cm, T30. - 288 x safety pins. - Levels: Floor + 2 - 324 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 10.900,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece. Transportation : Delivery can be carried out by our partner forwarding agency on request, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2022, approx. 100.16 running meters, height: 550 cm, shelf load: 3000 kg, pallet racking, heavy-duty racking, high-bay racking, industrial racking, racking immediately from stock Data : - Height : approx. 550 cm - Depth : approx. 110 cm - Length : approx. 100.16 running meters - Load: 3000 kg shelf load - Galvanized uprights - Cross beams 270 x 14 x 5 cm, T30 - Cross beams in orange - New BLT / PR55 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 037 x upright approx. 550 cm x 110 cm, disassembled. - 216 x crossbar approx. 270 x 14 x 5 cm, T30. - 432 x safety pins. - Levels: Floor + 3 - 432 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 14.930,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece. Transportation : Delivery can be carried out by our partner forwarding agency on request, the costs for this depend on the zip code. Rcjdjzxd Utopfx Adzof Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.