Print House 77

Condition: ready for operation (used), Year of construction: 2024, feed rate X-axis: 5 m/min, The machine has already been dismantled and stored. TECHNICAL DETAILS Adjustable speed: up to 5 m/min Gedozb Ip Iepfx Ab Roiu Roller pressure: pneumatic Adjustable temperature EQUIPMENT Manual system Swiveling, patented control panel Monochrome display Automatic sheet separation Anti-curl technology Compact design Faster Foiling KIT Ultra-quiet compressor Console on wheels IVIVID Matrix Omni-Flow Feeder 380 High-stack feeder LC display Adjustable front air flow Central suction belt Note: Accessories are without guarantee. The principle applies: “Item purchased as seen.” The prospective buyer must verify the completeness of the item on site.

Condition: new, Year of construction: 2023, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 52DLT030, compressed air connection: 6 bar, working width: 560 mm, warranty duration: 12 months, operating speed: 650 mm/s, Komfi Laminator Delta 52 (Feeding Head) New, Manufactured 2023 Output / laminating speed 3-40 m/min *) (regard. technological conditions) Maximum output 8000 sheets /hr Average monthly capacity of machine: non-stop production environment Paper specifications Max. sheet size 560 x 800 mm Min. sheet size 200 x 200 mm Basic weight 115 x 600 g/ m2 Thickness of sheets max. 0.7 mm; Overlap > 0 Thickness of sheets max. 1.4 mm; Overlap < 0 Foil specifications Material polypropylen, polyester, nylon Thickness 24-50 μm Inner diameter of tube 3“ = 76.2 mm Outer diameter of roll 350 mm Single lamination - Delta Feeding with loading head Sectional two-zone heating Pressure roller PUR B Film unreeling - airshaft - Amiga 52, Delta 52 Pneumatic straightening Without knife Without cutting knives Separation pneumatic Power EU 3x 400V Frame and covers - ASxxP Compressor 25 Unwinding unit - Amiga 52, Delta 52 One-system feeding head 43 mm lift Gijdpfszb Eawsx Ab Rju Drive chain - ASxxx Air blow gun

Condition: new, Year of construction: 2020, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 52AMG162, compressed air connection: 6 bar, working width: 560 mm, warranty duration: 12 months, operating speed: 400 mm/s, Komfi Laminator Amiga 52I (Intelligent In-Line Feeding) New, Manufactured 2020 Specifications: Max. speed of lamination: 25 m/min Max. output: 8000 sheets/h Min. sheet dimensions: 200 × 250 mm Max. sheet dimensions: 560 × 800 mm (or up to 1016 mm) Paper weight: 115-600 g/m² Paper thickness: Max 0.7 mm (with overlap > 0) / Max 1.4 mm (with overlap < 0) Max. paper pile: 6 cm (depending on sheet length) Thickness of laminating film: 24-50 μm; OPP, PET, Nylon Sheet overlap accuracy: ± 1 mm Godezb Db Hspfx Ab Rsiu Feeder: Intelligent In-Line Feeding (connection with the PRinter) Laminating Unit: Adjustable distance stoppers for lamination unit to enable processing thick substrates and windows lamination. ”On-the-fly” side-adjustable unwinding shaft with adjustable brake force. Height-adjustable and removable spread roller perfectly removes wrinkles from laminate. IR heating for laminating cylinder. Temperature sensor inside the cylinder for precise regulation. Rubber coated pressure roller. The powerful pneumatic pressure system guarantees even nip pressure and perfect lamination results. Separator & Delivery: Decurling unit consisting of bar and roller with position control to move the snapping moment automatically when the position of decurler is changed. Built-in film perforator to enable sheet separation. Cam-driven separation roller with adjustable tearing action, delivery roller and sheet skewing wheel. Fixed delivery desk with adjustable air nozzles.

Condition: new, Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 52AMG161, compressed air connection: 6 bar, working width: 560 mm, warranty duration: 12 months, operating speed: 400 mm/s, Komfi Laminator Amiga 52I (Intelligent In-Line Feeding) New, Manufactured 2021 Specifications: Gjdpfx Aszb Da Asb Rjiu Max. speed of lamination: 25 m/min Max. output: 8000 sheets/h Min. sheet dimensions: 200 × 250 mm Max. sheet dimensions: 560 × 800 mm (or up to 1016 mm) Paper weight: 115-600 g/m² Paper thickness: Max 0.7 mm (with overlap > 0) / Max 1.4 mm (with overlap < 0) Max. paper pile: 6 cm (depending on sheet length) Thickness of laminating film: 24-50 μm; OPP, PET, Nylon Sheet overlap accuracy: ± 1 mm Feeder: Intelligent In-Line Feeding (connection with the PRinter) OTF: Built in Over Toner Foiling unit Laminating Unit: Teflon Coated Rubber Roller Adjustable distance stoppers for lamination unit to enable processing thick substrates and windows lamination. ”On-the-fly” side-adjustable unwinding shaft with adjustable brake force. Height-adjustable and removable spread roller perfectly removes wrinkles from laminate. IR heating for laminating cylinder. Temperature sensor inside the cylinder for precise regulation. Rubber coated pressure roller. The powerful pneumatic pressure system guarantees even nip pressure and perfect lamination results. Separator & Delivery: Decurling unit consisting of bar and roller with position control to move the snapping moment automatically when the position of decurler is changed. Built-in film perforator to enable sheet separation. Cam-driven separation roller with adjustable tearing action, delivery roller and sheet skewing wheel. Fixed delivery desk with adjustable air nozzles.

Condition: like new (used), functionality: fully functional, Equipment: compressor, Vivid Matrix MX370P Laminating/Sleeking Machine pneumatic pressure adjustment of the heating roller unwinding for sleeking film Faster Foiling Kit for sleeking max. speed 10 m/minute max. sheet width 370 mm max. sheet length 1200 mm standard with manual feeder Optionally available: Vivid OmniFow Feeder 380 30 cm stack height max. sheet width 330 mm max. sheet length 380 mm Gijdpfxezbrrge Ab Rsu Both are available on short notice.

Condition: new, Year of construction: 2020, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 52AMG290, compressed air connection: 6 bar, working width: 560 mm, warranty duration: 6 months, operating speed: 400 mm/s, Komfi Laminator Amiga 52B (Bottom Suction Feeder) New, Manufactured 2020 Specifications: Max. speed of lamination: 25 m/min Max. output: 8000 sheets/h Min. sheet dimensions: 200 × 250 mm Max. sheet dimensions: 560 × 800 mm (or up to 1016 mm) Paper weight: 115-600 g/m² Paper thickness: Max 0.7 mm (with overlap > 0) / Max 1.4 mm (with overlap < 0) Max. paper pile: 6 cm (depending on sheet length) Thickness of laminating film: 24-50 μm; OPP, PET, Nylon Sheet overlap accuracy: ± 1 mm Feeder: Bottom Suction Vacuum Feeder Laminating Unit: Gijdpezbaxuefx Ab Rju Adjustable distance stoppers for lamination unit to enable processing thick substrates and windows lamination. ”On-the-fly” side-adjustable unwinding shaft with adjustable brake force. Height-adjustable and removable spread roller perfectly removes wrinkles from laminate. IR heating for laminating cylinder. Temperature sensor inside the cylinder for precise regulation. Rubber coated pressure roller. The powerful pneumatic pressure system guarantees even nip pressure and perfect lamination results. Separator & Delivery: Decurling unit consisting of bar and roller with position control to move the snapping moment automatically when the position of decurler is changed. Built-in film perforator to enable sheet separation. Cam-driven separation roller with adjustable tearing action, delivery roller and sheet skewing wheel. Fixed delivery desk with adjustable air nozzles.

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, GMP QTOPIC-380 F Gisdpfx Abeza Hdzj Rju Hot laminator for single-sided lamination, year of manufacture 2022 Working width 380 mm. Chrome roller 100 mm Ø. Thermal lamination up to 10 m/min. Single-sided lamination with de-curling device for perfectly flat sheets. Automatic sheet overlap for consistent results, independent of the operator. Working width 380 mm Films 25 - 44 microns, 58/77 core Paper thickness 120 g/m² ~ 350 g/m² Speed up to 10 m/min Heating time 5 minutes Pressure roller pneumatic Connection values 230 V, 2.8 kW Dimensions H x W x D in mm 1350 x 1700 x 720 Separation also possible for nylon films, pneumatic roller pressure with automatic stop at the end of the stack, including compressor. Sleeking (printing enhancement). Use of embossing rollers possible.

Condition: excellent (used), Year of construction: 2014, Foliant 520 HP with feeder Max size: 520 x 710 mm Min size: 250 x 350 mm Max speed: 15 m/min Separator Feeder Working temperatureL 80 - 140 C Available immediately Gijdpfx Aey Sir Tjb Rju

Condition: good (used), GMP Surelam-Pro 500D Roll Laminator Production-ready, This high-quality machine is manufactured in Korea. Description: Gijdpfjy Sd Txsx Ab Rju The GMP SURELAM laminator is a professional roll laminator with a working width of 500 mm. This laminator is ideal for a small printing company, advertising agency, or office. This device allows us to laminate a variety of materials thanks to independent heating control of the upper and lower rollers. Electronic lamination process control and two operating modes: manual and automatic, make working with this machine easy and enjoyable, and ensures laminations are always of the highest quality. The laminator offers single- or double-sided lamination options. Includes laminating pouch Technical specifications: – Maximum laminating width: 500 mm – Pouch thickness: 25-500 microns – Lamination speed: 700 mm/min – Pressure adjustment: manual – Temperature control: digital – Power supply: 230 V – Power: 3000 W

Condition: good (used), Foliant Mercury 760 NG Laminating Machine The most equipped laminating machine in Foliant’s offer. Fully automatic machine, ideal for digital printing houses. Very good condition, ready to work. Year of production 2019. Description: – feeding from a high stack, head on a servo motor (elevator) – automatic separator – pneumatic roller pressure – sheet straightening module – built-in Becker compressor – jogger on sheet collection – gilding module, rewinder Feeding system: servo motor head Max sheet size: 76×110 cm Gjdpfx Aoy Sd Trsb Rjiu Min sheet size: 25×32 cm Max. capacity 1300 sheets B1 / h Max lamination speed: 20 m / min Temperature: 80 – 140°C Heating time 8 min Installed power: 6000 W -Power supply 380V Weight 810 kg

Condition: good (used), Laminating Machine Komfi Delta 76 Stacker Manufactured in 2016/2017. The machine is 100% operational and ready for operation. This is an advanced, high-performance machine, ideal for commercial laminating. The machine is in very good condition and ready for production. Gjdpfx Aoy Sd Tlob Rjiu Technical specifications: Max sheet size: 760mm x 1120mm Min sheet size: 300mm x 220mm Min grammage: 115 gsm Max grammage: 600 gsm Operating temperature: 80-145°C Max operating speed: 35m/min Built-in Becker compressor Weight: 2800kg 380V power supply Additional air supply: 6 bar Power consumption: 18kW Pneumatic clamping, separation, and automatic feeding from a high stack, automatic stacker. Touch panel for easy operation. Sheet straightening module. Tool kit and foil included.

Condition: used, Year of construction: 2001, Format: 300 mm Giodjy R U Ttspfx Ab Rju

Condition: used, Year of construction: 1998, functionality: fully functional, Laminating machine LAMINA 1114 FA. Manufactured in SWEDEN; year: 1998 Max format: 1400×1100 mm Giodpfx Asy Ryhvsb Rsu Min format: 200×350 mm Top sheet: 130–450 g/m2 Bottom sheet: from 250 g/m2 Material thickness: 0.6–10 mm Feeder height: 500 mm (bottom), 300 mm (top) Production depending on material: up to 1,500 sheets/hour The machine has been dismantled. At the time of disassembly, it was operational.

Condition: good (used), Foliant Vega 400A Laminating Machine The most equipped laminating machine in Foliant’s offer. Fully automatic machine, ideal for digital printing. Very good condition. Year of manufacture: 2015. Description: – High stack feeding (elevator) – Automatic separator – Pneumatic roller pressure – Sheet straightening module – Built-in compressor for blowing and vacuum (Becker) Giodpfx Asy Nzkcjb Reu – Jogger on the sheet outlet Feeding system: Pneumatic belt Feeding stack height: 30 cm Max. Capacity: 2100 B3 sheets/h Maximum lamination speed: 18 m/min Temperature: 20 – 140°C Heating time: 8 min Installed power: 3000 W Power supply: 230V Weight: 320 kg Made in the Czech Republic.

Condition: good (used), Laminator Bagel Digifav 520 B2 automatic laminating machine The machine is 100% functional, in perfect condition, ready for production. Very low mileage. It is an advanced, high-performance machine dedicated to digital printing houses. Gijdpfx Abey Nfh So Reu Production Spain. Technical data: Max sheet size: 520mm x 720mm Min sheet size: 220mm x 220mm Min weight: 130 gsm Max grammage: 350 gsm Operating temperature: 80-145°C Max working speed: 22m/min Weight: 750 kg Power supply 380V Additionally, 6 Bar air A steel, chrome-plated cylinder with a large diameter, filled with oil for greater operational stability. Pneumatic pressure, separation and automatic feeding from a high stack. Adjustable pressing force. Expanding shaft for attaching the foil, mounted on a tilting arm. Touch panel for easy operation. Sheet straightening module. Receiving table. Ask about the product

Condition: used, Year of construction: 2013, Year: 2013 Condition: very good Counter status: about 5.6 million Technical specification: - Laminating speed: 25 m/min - Minimum sheet size: 200 × 200 mm - Maximum sheet size: 560 × 800 mm Gijdpey Iwirjfx Ab Rou - Paper weight range: 115–600 g/m² - Max. feeder pile height: 520 mm - Film thickness: 24–50 μm - Film types: OPP, PET, Nylon - Heating time (laminating roller): approx. 4 min - Sheet overlap accuracy: ±1 mm - Machine dimensions (incl. table): 263 × 100 × 147 cm - Air supply: min. 6 bar - Max. air consumption: 95 l/min - Max. pressing force: 15 kN - Power consumption: 7 kW - Machine weight: 650 k Configuration: - Suction feeder head - Vacuum pump - Automatic sheet overlap control - Double sheet / misfeed detection - Automatic sheet separation via built-in perforator - Anti-curl device (roller + bar) - Sheet separation detector - Separation roller with adjustable speed - Electronically controlled tearing section - Fixed delivery table

Condition: good (used), D&K Europa System B2 Laminator The machine is 100% operational and ready to use. This advanced, high-performance machine is ideal for commercial laminating. Technical specifications: Gisdpfxoy Hgkis Ab Rou Max sheet size: 540mm x 740mm Min sheet size: 210mm x 220mm Min weight: 115 gsm Max weight: 400 gsm Operating temperature: 80-145°C Weight: 750 kg 380V power supply Chrome-plated steel cylinder Pneumatic clamping, separation, and automatic high-stack feeding. Sheet feeding accuracy: ±2.0mm. Touchpad for easy operation. Sheet straightening module. Sheet discharge jogger.

Condition: used, Year of construction: 2016, Year: 2016 Condition: very good Configuration: - Automatic loading - Automatic separátor - Jogger - Foiler unit - Winding device that allows use of metalized film (gold, silver, red, etc.) and spot varnish film allpied over print from digital printing machine. Technical specification: - Maximal speed- single side 18 m/min. - Feeding System - automatic, vacuum belt, Feeder's Capacity 28 cm - Overlaps - In-Run Screw control, Overlaps Accuracy ± 2 mm - Separation - Automatic - Paper Weight - 115–500 g/m² Giodoy Exd Eepfx Ab Reu - Main Roller Pressure System - Pneumatic - Compressor - Included - Minimal Sheets Size (w×l) - 20×30 cm - Maximal Sheets Size (w×l) - 53×75 cm - Maximal Performance - 1500 B2 / hod. - Temperature Control - 80–140 °C, Warming Up Time 8 min - Power Supply - 230 V AC, 50-60 Hz - Power - 3850 W - Mechanical Parameters - Floorspace (w×l) 100×260 cm, Weight: 390 kg - Modular Stand - Pallet Stacker - Non-sticky pressure roller - Air Shaft

Condition: used, Year of construction: 2010, Year: 2010 Condition: very good- after overhaul Foliant Gulliver C 520 A - automatic loading and separation Giedpfxoy Exb Do Ab Rsu - maximum format: 520 mm (width) x 720 mm (length) - speed regulation 0 – 15 m / min - temperature regulation 80 – 140°C - cars vacuum belt loader - automatic separator - pneumatic pressure

Condition: used, Year of construction: 2008, GENERAL TECHNICAL DATA: Performance Mechanical speed: up to 450 m/min Production speed: depending on substrates and adhesive system Web & Dimensions Maximum web width: 1330 mm Maximum laminating width: 1315 mm Minimum web width: 600 mm Gisdpfxey Er A Uo Ab Reu Roll Specifications Maximum roll diameter: • Unwinder: 1000 mm • Rewinder: 1000 mm Core diameters: • Unwinder: 3” / 6” (76 / 152 mm) • Rewinder: 6” (152 mm) Web Tension Unwinding: 500 N Rewinding (with taper tension): 550 N Electrical Data Voltage: 3 × 400 V ±10%, 50 Hz (without neutral) Total installed power: 85 kW Maximum input current: 120 A Main switch: 150 A Pneumatic Requirements Pressure: 6 – 9 bar Consumption: 70 l/min Feed connection: 1/2” Hydraulic System Pressure: 3 bar Cooling consumption: up to 2700 l/h Feed connection: 1/2” Cooling System Water pressure: max. 5 bar Water temperature: 15–20°C Temperature difference: 4°C Pressure difference: 2.5 bar Flow rate: 2000 l/h Machine Configuration • Shaftless unwinder (primary & secondary) • Shaftless rewinder • Automatic web guiding system • Adhesive metering system (5-roll application unit) • Laminating unit with pressure rollers • Cooling calender • PLC-controlled drive system • Touch screen control interface Materials (Supported) • Aluminium (ALU) • BOPP • LDPE / LLDPE • Nylon (Cast) • OPA • PET / PETP • PP (Cast) • Paper Material Thickness Range Films: approx. 7 – 200 µm (depending on material) Paper: 40 – 200 gsm Working Conditions Temperature: 10 – 40°C Humidity: 30 – 90% (non-condensing) Additional Equipment • Optional water chiller: approx. 21 kW cooling capacity • Closed-loop cooling system possible Control & Automation • PLC control system • Inverter-driven motors • Recipe storage (up to 500 jobs) • Production monitoring (speed, meters, tension) • Emergency stop system

Condition: ready for operation (used), Year of construction: 2004, ➢ Speed 10-80 m/min. ➢ Minimum Sheet Size: 22 x 30 cm ➢ Maximum Sheet Size: 72 x 102 cm ➢ Sheet Production: >10.000/h ➢ Sheet Weight SF: 100-600 g/m2 ➢ Adhevise Application SF: 1.5 – 4.0 g/m2 ➢ Working Width 72 cm ➢ Film Thickness 10-50 µM ➢ Film Roll Diameter 350 mm ➢ Energy Consumption 24/66 kW ➢ It is Very Good Condition ➢ Available Immediately. Gjdpfx Aoyzcikob Rsiu

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, type of input current: AC, Equipment: compressor, Foliant VEGA 400a Fully Automatic Laminating Machine Gjdpfx Ajyxyzrjb Roiu

Condition: excellent (used), Overview Now in stock at Glendale we have this Refurbished Foliant Vega 400A Automated Laminator with Digital Foiling. This B3+ laminator has been fully refurbished to excellent working condition and is designed for heavy duty digital output and B3 litho lamination. Gjdpfxsyxp Nxs Ab Reiu The Vega 400A is a compact industrial laminating machine capable of speeds of up to 18 metres per minute, producing over 2,000 SRA3 sheets per hour. It features a deep pile vacuum feeder, high speed bump separator, and non-stick pressure roller, ensuring reliable feeding and consistent lamination quality across both digital and offset printed sheets. The system includes an adjustable twin decurl unit for offset and digital prints, a digital foiling module for foil, holographic, glitter, and spot-UV style finishes, and the optional jogger reception unit for neat sheet delivery. The integrated pneumatic compressor allows the machine to operate without any external air supply, making it a versatile and compact finishing solution. The system has seen light use within a small digital printing operation and has processed under 75,000 laminated sheets since new. Key Features Rising pile vacuum feeder with belt head Built-in Becker vacuum pump Quick change film shaft with tension control Film capacity up to 3000 metres (22–42 micron) Inline trim slitter and perforating wheel Twin adjustable decurl system Heated chrome laminating roller Pneumatically adjustable pressure High speed bump separator Touchscreen control system Optional jogger reception included Why Buy the Refurbished Foliant Vega 400A? The Refurbished Foliant Vega 400A provides a highly productive and versatile laminating solution for print businesses producing both digital and offset work. Key benefits include: Production speeds of up to 18 metres per minute Output of over 2000 SRA3 sheets per hour Integrated digital foiling capability for premium finishes Twin decurl system for digital and litho prints Integrated compressor – no external air supply required Compact industrial footprint Fast warm-up time of under 10 minutes Optional jogger delivery included This system allows printers to produce high quality laminated products while also adding premium finishing effects such as digital foil and decorative lamination. Specifications Manufacturer Foliant Model Vega 400A Max sheet size 380mm x 660mm Min sheet size 200mm x 200mm Paper weight 115gsm - 500gsm Max speed 18 metres per minute Laminating roller pressure Pneumatic Feeder Automatic Suction Vacuum Belt Seperator Automatic bump rollers Decurl bar Standard - in run adjustable Air compressor Integrated as standard Warm up time 8 minutes Temperature range 80 - 140°C Jogger reception Included Power requirement 230/240v 50/60Hz Machine weight 370kg Machine dimensions with jogger (L)1980mm x (W)820mm x (H)1230mm

Condition: used, Year of construction: 1985, Year: 1983–85 Condition: functional Machine description - Combined laminating machine for: - water-based dispersion lamination - thermal lamination Equipment: - Mabeg automatic feeder Gedpfxjyxpbns Ab Rjiu - Water heater (TW3) - Sheeter BAT 127 / BAT 102 - Jogger table Technical specifications: - Maximum format - 1100 × 1400 mm - Minimum format - 210 × 300 mm - Production speed - approx. 45 m/min - Paper weight range - 80–600 g/m²

Condition: used, machine/vehicle number: 6694, We are offering our laminating line for sale. The following components have already been serviced/overhauled: · Overhaul or cleaning of the sheet feeder drive unit in 2025 · New main drive 2024 with frequency converter (manufacturer SEW) · Overhaul of temperature control units (2 pcs.) in 2022 · Dryer drum and laminating roller Gsdpfxoyt Iprj Ab Reiu · Heaters, level switches, and power contactors have been replaced. · Slip clutch separator overhauled in 2023 · Application roller modified with motor and frequency converter (manufacturer SEW) in 2017 The machine is still in operation and is being sold due to a reduction in our machine fleet.