TB Fruit

Condition: good (used), 1 x Guttridge Screw Elevator Height is 3m. Screw is 3.3m. Blsdpfxez Ap Ndo Aa Isn *The is no motor on this for the screw elevator but the horizontal screw is complete*

Condition: used, Guttridge Bulkflo Mobile screw elevator Stainless, mobile elevator screw conveyor, with a 400l holding hopper, horizontal discharge screw feeds directly onto the screw elevator, discharges at 2600mm, 160mm screw diameter, with vibratory mesh top, also three spare meshs, mobile, 3Ph Blsdpfez Ak R Asx Aa Isn

Year of construction: 2019, condition: like new (used), functionality: fully functional, DESI-14 Industrial Fine Grinding & Micronization System Complete Industrial Production Line – Excellent Condition Complete industrial grinding and micronization system based on the DESI-14 high-speed disintegrator, designed for intensive particle-size reduction and production of fine powders. Manufactured in 2019 by Desintegraator Tootmise OÜ, Estonia, this particular grinding and activating unit was manufactured for the grinding and activation of natural zeolite. The system combines the DESI-14 disintegrator with controlled material feeding, two-stage cyclone separation, automatic air filtration, product conveying and big-bag discharge, providing a complete industrial grinding line. Final particle-size distribution and processing capacity depend on the characteristics of the processed material, feed rate, required fineness and operating parameters. According to the manufacturer's operating instructions, throughput can be adjusted and increased where the required product fineness and motor load permit. Blsdpszy Nbhsfx Aa Ien Proven Factory Performance During the manufacturer's factory test using calcium carbonate (CaCO₃), the system achieved: Throughput: 1,000 kg/h Final product: 92% of particles below 30 μm Feed particle size: below 100 μm Feed moisture: 2% This provides documented factory performance under the stated test conditions. Actual throughput and final particle-size distribution depend on the processed material, required fineness and operating parameters. Technical Specifications Manufacturer: Desintegraator Tootmise OÜ, Estonia Model: DESI-14 Year of manufacture: 2019 Technology: High-speed impact disintegrator Rotor configuration: 6-row rotor set Rotor sets included: 2 complete sets, each consisting of 2 rotors Rotor speed: approx. 2,965 rpm Main drives: 2 × 30 kW electric motors Maximum total installed power: 80 kW Power supply: 3N, 50 Hz, 380 V Wear protection: Working surfaces of the rotor impact elements protected with HARD 60 wear-resistant alloy Cooling: Water-cooled housing and cover Maximum airflow through grinding unit: 1,000 m³/h Maximum feed moisture: 2% Maximum feed temperature: 50°C Electrical protection: IP54 / IP55 DESI-14 Disintegrator Dimensions: 1,570 × 1,160 × 1,300 mm Net weight: 850 kg Complete Grinding Line Installation dimensions: approx. 6,000 × 5,200 × 4,000 mm Gross weight: approx. 2,700 kg Feed hopper volume: 1.5 m³ Complete System Includes DESI-14 disintegrator on frame, 2 complete rotor sets,1.5 m³ feed hopper, WAM screw feeder, First-stage cyclone, Second-stage cyclone with hopper, 3 rotary valves, WAM screw conveyors, WAMFLO automatic air filtration system Exhaust fan, Diverter flap valve for big-bag filling, Control board, Supporting steel structures, Connecting channels and components The grinding system is designed as an integrated production line: material is fed into the DESI-14, ground material is transported through the air stream into the cyclone separation system, and the remaining fine material is captured by the automatic air filter. The finished product is then conveyed towards the big-bag discharge system. Machine Condition & Availability Condition: Excellent and fully operational Location: Zagreb, Croatia Availability: Immediately available

Condition: used, K-Tron volumetric dosing system dosing machine Various models in stock. Twin-screw, single-screw Equipped with a pneumatic shut-off valve Bodpfx Ajzcfbqoa Ijln Equipped with a vent filter 10 units in stock See our other listings VMA Wekerom

Condition: used, AZO dispensing cabinet, feed cabinet Set of 2 Equipped with a butterfly valve Equipped with a bunker vibrator Bledpfx Aaszavw Rs Ion Entirely made of stainless steel 316 Mounted on a weighing frame (load cells are defective) See our other listings.

Condition: excellent (used), Gericke PTA50 Pneumatic conveying system Bledpfx Asy Tbfnja Ien Stainless, Mobile pneumatic conveying and dosing system used in the food, chemical and pharma industries, working pressure 3.9Bar, volume 50L, with butterfly valve and actuator

Condition: good (used), 1 x Powder Packing Machine/Powder Depositor Model: AF-PP5 Range of pack: 1-1.5kg Bedpfxeyt H Aqj Aa Ieln With weigher

Condition: used, AZO vacuum system with dosing screw Screw type: DFS 155x550 NE320 A22R Separator type: PKS 320-50 M A23R Year of manufacture: 2004 Equipped with quick cleaning system on dosing screw Bljdpjygh Emofx Aa Isn Equipped with various pneumatic valves and accessories for vacuum conveying See our other listings VMA Wekerom

Condition: used, AZO weighing bunker Blodpfsx Nzvlox Aa Ijn Type: Weighing bunker D800 Vacuum filter D500-65, 2.5 m² filter area Year of manufacture: 2017 3 load cells, 150 kg each See our other advertisements VMA Wekerom

Condition: used, Stainless steel dosing screw, feed screw conveyor, auger Equipped with additional feed hopper with aluminium lid Screw diameter: 200 mm Motor power: 3 kW, 36 rpm Total length: 1730 mm See our other listings VMA Wekerom Blodpfx Aaox Nzu Uj Isn

Condition: used, tank capacity: 15,000 l, For sale: 3 silos no longer needed. Bjdpfjx Iu N Aox Aa Ioln

Condition: new, Year of construction: 2024, functionality: fully functional, nominal power: 90 kW (122.37 HP), rotational speed (max.): 5,760 rpm, rotational speed (min.): 1,592 rpm, total height: 3,437 mm, total length: 3,275 mm, total width: 2,500 mm, type of cooling: air, compressed air connection: 6 bar, Equipment: rotational speed infinitely variable, The impact mills of the REKORD 212-630 series in the welded housing design are robust universal mills for demanding industrial applications in continuous operation. ● Size: 630 mm (nominal rotor diameter) ● Mill housing: Heavy-duty welded stainless steel housing, pressure surge resistant up to 10 bar (AISI316L), with product-contacting surface finish Ra ≤ 1.6 μm for easy cleaning, equipped with a pivoting door and safety interlock type HAAKE (key transfer system); monitoring of housing and bearing temperature, vibration monitoring ● Mill inlet: JACOB pipe; DN 150 mm ● Mill outlet: Ground material and air discharge downward into a suction hopper, optimized for connection to the conveying line to the total separator ● Mill drive: Belt drive, three-phase motor, energy efficiency class IE3 (manufacturer SIEMENS), 90 kW, 3~ 400 V, IP55; suitable for operation with frequency inverter ● Sealing materials: Silicone; PTFE, sealing material conforms to EU and FDA food hygiene standards ● Grinding elements: Pin rotor: 4 pin rows, pin Ø 7 mm (wear-reduced); Pin stator: 3 pin rows without external pin circle, pin Ø 7 mm ● Bearings: Designed for toughest operational demands in continuous industrial service, heavy-duty bearing housings with temperature and vibration monitoring (early detection of potential bearing failure and avoidance of hot surfaces) ● Inert gas supply/monitoring for shaft seal on product chamber side ● Run monitoring to detect operating faults ● Machine frame: The complete unit – mill, drive with motor, tensioning rails, belt drive, and belt guard – is installed ready for use on a sturdy machine frame with height-adjustable machine feet Main components of the offered system include: ● Product feed/transfer from customer’s upstream process and transfer to a rotary valve (certified ATEX protection system); ● Industrial pin mill type REKORD 630-SSt with welded housing and ground surfaces; ● Product separator with discharge rotary valve (certified ATEX protection system); ● Pneumatic conveying line with air inlet/outlet, including suction blower; Bsdpfx Aex Ac Rbea Isln ● WITHOUT control system, without frequency inverter

Condition: like new (used), functionality: fully functional, construction height: 2,000 mm, power: 2 kW (2.72 HP), Tapis elevateur equipé d un caisson epuration magnetique (neodymes) à nettoyage automatique . diametre 300 Elimination en continu des particules ferreuses dans les granulés, les poudres ou les pulverulents . agro alimentaire épuration des sucres et farines dans la chimie, épuration des poudres dans les plastiques épuration des granulés ou des broyés épuration du plâtre et ciment Bjdpfxsxdwyte Aa Isln

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, We are selling a Reimelt EL6 / 1000 S. Up to 1,000 Berliners can be produced per hour. A fully automatic filling station is also included. The system has just been serviced by Reimelt at a cost of several thousand euros, so it is in good condition. If you have any questions or would like to arrange a viewing, feel free to call or email us. Bledpfjxcaymox Aa Ien

Condition: used, Stainless steel dosing screw, auxiliary feed screw Entirely stainless steel Screw flight diameter: 150 mm Hopper dimensions: 800 mm x 700 mm x 1100 mm See our other listings Blodpfsw Abtdjx Aa Ijn VMA Wekerom

Condition: excellent (used), Dinnissen sack discharge system, sack discharge station Semi-automatic machine All stainless steel Equipped with empty sack press Equipped with left-right distribution screw Equipped with DCE Donaldson dust extractor Neat, complete machine Bledpswygfyefx Aa Ien

Condition: excellent (used), Stainless steel feed unit, dosing device, dosing sluice. Feed unit for hammer mill. Entirely made of stainless steel. Inlet dimensions: 615mm x 240mm x 430mm. Blsdpowygbnjfx Aa Ijn VMA Wekerom See our other listings.

Condition: like new (used), Refurbished stainless steel dosing screw, auger, filling machine, screw dosing Coarse and fine dosing Bedewygbbepfx Aa Isln Screw flights can be quickly disassembled for cleaning Motor power 1.1 kW and 0.75 kW See our other listings VMA

Condition: good (used), Stainless steel conveyor, checkweigher, weighing machine, filling machine, scale Entirely stainless steel construction Spare conveyor belt available Equipped with Siemens PLC control for weighing Weighing up to approx. 10 kg Bledpjwyga Rofx Aa Ien See our other listings VMA

Condition: good (used), Dosing installation bag emptying machine with dosing screw Stainless steel discharge cabinet Stainless steel dosing screw with movable bottom and pneumatic end valve Bledpfjwyf U Tsx Aa Isn Filter unit for dust extraction during refilling VMA Wekerom See our other advertisements

Condition: good (used), Stainless steel vibrating chute conveyor with dosing unit Bodpfx Aaswyf Rne Ieln Including storage hopper Entirely made of stainless steel With stairs for refilling the hopper See our other listings

Condition: good (used), J-Tec sack tipping cabinet with filter extraction Entirely stainless steel Lockable by lid Full sensor present Control cabinet excl. cabling Equipped with pneumatic bunker vibrator Bljdpfx Aswyf Iyea Ion Matching weighing hopper with vacuum filter and double K-Tron dosing screw also available See our other advertisements

Condition: good (used), K-Tron dosing machine, dosing screw, weighing filler, dosing unit Type: T-35 Incl. scale with control system and display (functionality unknown) See our other advertisements VMA Wekerom Blodpewyf Iaefx Aa Ion

Condition: good (used), Powtec granulator sieve through sieve rotor sieve mill Pharmaceutical design, fully polished Capacity: 40-240 kg/h Sieve area: 226 m² Motor power: 0.75 kW See our other advertisements Bedpfxewyf Hce Aa Ieln VMA Wekerom

Condition: used, Bulk discharge cabinet, bag discharge hopper Includes extraction system and Aerob filter unit. Entirely made of stainless steel. Excluding fan and filter cartridge. Bledpewyf D Iofx Aa Isn See our other listings. VMA Wekerom