Tj-trade

Condition: new, functionality: fully functional, Year of construction: 2026, Model ERE 120 Load capacity: 2,000 kg Bdsdjzyctkspfx Ac Tjg Lifting height: 122 mm Speed: 9 km/h

Condition: good (used), Year of construction: 1979, operating hours: 6,766 h, load capacity: 1,250 kg, lifting height: 5,400 mm, fuel type: electric, mast type: triplex, construction height: 2,480 mm, mileage: 6,766 km, This JUNGHEINRICH triplex reach truck is in good condition; Capacity of 1,250 kg; Lifts up to a height of 5,400 mm; Overall height is 2,200 mm; Equipped with FREELIFT; 6,766 operating hours; The 2012 battery comes with an external charger; Watch the video on YouTube. Bdsdpfx Acozyctdo Tjg

Condition: good (used), Year of construction: 2020, Various tools and tool holders. Many Wohlhaupter and other brands. Many of these have never been used. See pictures. Bedpfjzycr Hjx Ac Tedg For sale as a package only.

Condition: used, Year of construction: 1997, Control HEIDENHAIN serial number 11730 x-axis 800 mm y-axis 600 mm z-axis 500 mm Bdedpszycryofx Ac Tsg turning speeds max. 18000 U/min rapid travel - longitudinal/face 35 m/min chip conveyor ja kW weight 7 t

Condition: used, Year of construction: 1988, centre distance 1100 mm 840 mm hollow 80 mm ja connected load 18,5 kW digital ja multifix ja Bjdpfx Acjzycrto Tjdg weight of the machine ca. 4 t

Condition: used, Year of construction: 1970, 3 Bdedpfxszycrmo Ac Tjg -- -- --

Condition: used, Year of construction: 1972, spindle diameter 100 mm x-travel 1400 mm dismantled ja tool adaptor SK 50 digital ja weight of the machine ca. 14 t Bdsdjzycrgepfx Ac Tjg

Condition: like new (used), Year of construction: 2012, functionality: fully functional, Clamping table, head adjustable by 400 mm, as new, high-performance thread cutting machine up to M10. Bdjdpfx Acszycraj Tsg

Condition: good (used), mileage: 349,604 km, power: 355 kW (482.67 HP), first registration: 11/2019, fuel type: diesel, axle configuration: 6x2, fuel: diesel, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, suspension: air, Year of construction: 2019, Equipment: AdBlue, Bluetooth, EBS, air conditioning, cruise control, electric window regulation, electronic stability program (ESP), fog lights, navigation system, parking heater, power mirror, retarder, seat heater, soot filter, = Additional Options and Accessories = - Aluminum fuel tank - Brake booster - EPS (Electronic Power Steering) - Low noise - Intarder - Refrigerator - Particulate filter - Sunroof - Side door Bdodpfxezycq Ne Ac Tog - Seat heating - Auxiliary heater - Toolbox = Additional Information = Axle Configuration Suspension: Air suspension Front axle: Steerable Rear axle 1: Lift axle; Steerable Weights Unladen weight: 9,795 kg Payload: 16,205 kg GVW (Gross Vehicle Weight): 26,000 kg Environment Emission class: Euro 6d Maintenance, History, and Condition APK (Technical Inspection): Valid until 08.2027 Technical condition: good Optical condition: good Identification Reference number: 74 Vehicle number: 74 DAF XF 480 Super Space 6x2 / BDF / Retarder / Eu6d / Steerable + Lift axle / 349,000 km .: XLRASH4300G292897 TÜV (German Technical Inspection Association): 08.2027 - SP (Inspection due): 03.2027 Suspension: Air / Air (Full Air) Transmission: Automatic Climate Auxiliary climate control Retarder Engine brake Cruise control Cool box Auxiliary heater Distance Assist Lane Keeping Assist Steerable + Lift axle Exhaust standard EURO 6d No liability for printing and typographical errors, changes, prior sale, and mistakes. = Company Information = No liability for printing and typographical errors, changes, prior sale, and mistakes. Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email:

Condition: excellent (used), functionality: fully functional, Coil weight 350 kg Max. strip width 200 mm Bdsdpfxozycq Aj Ac Tog 11-roller straightening unit Roller diameter 60 mm 2 feed rollers 2 exit rollers

Condition: excellent (used), Year of construction: 2020, increased power by 18.5 kW Bjdpfx Acezycqpo Tjdg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, input voltage: 400 V, spindle mount: MK 4, drilling depth: 150 mm, total width: 500 mm, total length: 700 mm, overall weight: 290 kg, Equipment: documentation/manual, 3-phase 400V, 2-speed motor is running smoothly! Geared head with 8 spindle speeds. Spindle RPM adjustable from 75 to 3010. Motor runs in both left and right directions. Spindle power downfeed. 8 feed rates adjustable from 0.004 to 0.30 mm/revolution. Adjustable drilling depth. Maximum drilling depth: 150mm MT4 spindle mount. Tool ejector. E-Off switch. Head and table are height-adjustable. Table size: 500x400mm Good overall condition. Made in Sweden. Year of manufacture: 2008 Weight: 290KG Overall dimensions: 70x50x180CM Contact us for shipping options! Bdodpfx Aozycqcoc Tsg €2,850.00

Condition: new, Year of construction: 2025, Sawblade tiltable 0-46 ° Length of the rolling table 3200 mm cutting width 1000 mm Bodpjzycp Esfx Ac Tedg Motor output 5,5 kW Cutting height 179 mm Cutting height at 45° 123 mm Saw blade diameter 500 mm Speed 3/4/5000 U/min. weight of the machine ca. 1300 kg

Condition: good (used), Year of construction: 2000, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 column arm 200 mm Control ELGO P8721 oil volume 160 L 0 max. 300 bar voltage 400 V main drive 7.5 kW weight of the machine ca. 4800 kg. Bdedjzycpxopfx Ac Tog dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop good condition (!!) Features: - Electro-hydraulic sheet metal shear ("swing cut") - Machine frame = all-steel welded construction - ELGO NC control system, Model P8721, control panel on the front left * for positioning the electrically driven backgauge * Target/actual position value input possible * Adjustment via three-phase motor using a toothed belt - Support table with ball bearings * Recessed handles between the table plates - Front finger guard - Hydraulic sheet metal hold-down devices - 1x side stop with mm scale - 2x front support arms with mm scale - 1x freely movable foot switch - Emergency stop button at the front - 1x movable / rear scrap deflector - Original operating instructions Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal blanks

Condition: ready for operation (used), functionality: fully functional, spindle speed (max.): 2,000 rpm, total length: 1,000 mm, total width: 800 mm, spindle mount: MK 2, type of input current: three-phase, The three-phase 380-volt motor is running smoothly. Geared headstock, with gears running in oil. Six spindle speeds are adjustable from 120 to 2000 RPM. Head height and angle are adjustable. MT2 spindle taper. Power table feed with three adjustable feed rates: 33-65-170 mm/min. Maximum distance between table and spindle: 375 mm. Cross table dimensions: 630x150 mm. Adjustable LED machine light. Emergency stop switches. Overall in good condition. Made in Austria. Bodpfozycprsx Ac Tjdg Dimensions: 80x100x185 cm. Includes all accessories as shown in the pictures, located on the floor next to the machine. Contact us for shipping options! €2,650.00

Condition: used, empty load weight: 6,100 kg, axle configuration: 3 axles, first registration: 01/2023, next inspection (TÜV): 01/2027, tire size: 385-65 R22.5-385-65 R22.5, Year of construction: 2022, ref: F1062691 Equipment: * Air connection: Red/yellow connector, * Electrical connection: 1 x 15-pin + 2 x 7-pin, * ABS, * EBS, * Side impact protection, * Lift axle: 1, * Tool box: 2, * Rear door design: Rear portal doors, * Locking rods on rear doors: 4, Bjdpezycn Ujfx Ac Tsdg * Sliding tarpaulin, * Side sliding tarpaulin, * Multilock, * Floor: Plywood floor, * Recessed lashing rail (aluminum): 32 VIN: WKESD000001062691 Tire size: 385-65 R22.5 Internal length: 13.62m Width: 2.55m Internal width: 2.48m Height: 4.02m Internal height: 2.7m

Condition: used, mileage: 34,500 km, power: 251 kW (341.26 HP), first registration: 07/2014, fuel type: diesel, empty load weight: 8,950 kg, maximum load weight: 9,050 kg, overall weight: 18,000 kg, axle configuration: 4x4, wheelbase: 4,500 mm, brakes: constant throttle, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: en route / in transit, registration number: Haus, 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, switch 8, ABS (anti-lock braking system), constant throttle, auxiliary drive, raised exhaust, differential lock, fog lights, long-range headlights, work lights, rotating beacon, storage compartment, leaf spring suspension, winter service equipment, U-shaped protection, side aluminum fender, roof hatch, green environmental badge. Wheelbase: 4500 mm, body: Atlas ARK 122 roll-off system (year of manufacture 1997) for containers up to 5.5m (extendable underrun protection). Transmission: 9 S 1310 OD! Roll-off salt spreader available at an extra charge! Bdodpfx Aezycnzec Tog All information is without guarantee as the vehicle is currently en route! ACCESSORY INFORMATION IS WITHOUT GUARANTEE; subject to change, prior sale, and errors!

Condition: used, 4-axis machining center Bdjdpfx Ajzycnusc Tog

Condition: used, grinding length 600 mm grinding width 375 mm workpiece height 375 mm workpiece weight 300 kg table surface area 900 * 350 mm grinding spindle speed 1500 / 3000 U/min dimensions of grinding wheel 300 x 50 x 76,2 mm weight of the machine ca. 3,3 t dimensions of the machine ca. 3,1 x 2,6 x 2,1 m MICRO GRANIT has excellent properties for high-precision grinding machine construction. Damping properties: 1:10 ratio compared to gray cast iron, ensures the best grinding quality. Thermal behavior: suitable for grinding operations with µ tolerances. X-axis – table longitudinal movement: - Table switching: extremely quiet, contactless. - Quick adjustment: via cams. Bjdpjzycnnsfx Ac Tsdg - Work table: Mehanit cast iron. - Guide system: two precision flat guides. - Lubrication: plastic coating. - Drive: hydraulic, automatic. - Table stroke: 100–250 mm. - Table speed: 40 m/min. - Switching: via cams, contactless. - Hydraulics: horizontal monoblock. - Table cycle: 30 min. Y-axis – Vertical adjustment of the grinding wheel: - Play-compensating mechanism: > ensures even contact with the guides. - Vertical movement: > via precision lead screw. - Drive: adjustable electric motor.

Condition: used, Year of construction: 2001, grinding length 900 mm grinding width 510 mm workpiece height 475 mm grinding height 475 mm table surface area 800 x 450 mm table load max. 400 kg total power requirement 9,37 kW weight of the machine ca. 3 t dimensions of machine L x W x H 3,14 x 1,75 x 2,07 m Bdjdpfxezycmds Ac Tsg Accessories: magnetic plate 800 x 450 mm, grinding wheel with flange, wheel trueing attachment, various grinding wheels and flanges separate, wet grinding attachment with band filtration

Condition: new, Year of construction: 2026, -Maximum horizontal cutting length: 2500 mm -Maximum vertical cutting length: 2200 mm -Maximum vertical cutting height: 1600 mm -Maximum horizontal cutting height: 1400 mm -Maximum cutting thickness: 60 mm -Engine power: 5 HP (3.7 kW) -Blade diameter: 250 mm -Blade speed: 5300 rpm Bedszycl Topfx Ac Tedg

Condition: used, Year of construction: 2005, Mikron UCP1350 Available immediately! Travel: X-axis: 1,350 mm, Y-axis: 1,150 mm, Z-axis: 895 mm Bsdpozycl Hefx Ac Tedg A-axis: degrees NC rotary table: 1.100 x 1.000 mm max. table load: 1.600 kg Spindle mount: HSK-A63 tool magazine: 60 seats Spindle speed: 15.000 U/min Control: Heidenhain iTNC530 Internal coolant supply (IKZ): 40 bar

Year of construction: 2023, condition: excellent (used), Number of NC axes: 4 X-axis: 7200 mm Bdjdpfxezyclto Ac Tsg Maximum tool length: 190 mm Number of tool positions in the tool magazine: 12 Number of clamping mandrels: 8 Number of fixed stops for profiling: 4 Clamping block positioning: Automatic Maximum profiling height: 300 mm Motor power: 7.5 A-axis: +/-90° continuous

Condition: used, Year of construction: 2012, number of controlled axis 6 weight max. in kg 180 (max. 230) kg Bedpfszyclgsx Ac Todg control KR C4 KUKA positioning accuracy +/- 0,06 mm 0 +10 °C - +55 °C Protection class IP 65 Noise level

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Hermle U1130 5-Axis Very good condition! Available immediately! Operating hours: 35,500 h spindle hours total: only 11,000 h Maintenance measures in 2018: machine rebuild, drive, spindle: for €30,000 Travel: X-1130 mm, Y-720 mm, Z-630 mm table size: 1300 x 720 mm max. table load: 700 kg NC rotary table: 800 mm diameter, 20 rpm B-axis: Bsdpfx Acszych Ue Tsdg Control: Heidenhain iTNC530 Spindle speed: 20-18,000 rpm Spindle mount: SK40 tool magazine: 28 seats Internal coolant supply (IKZ): 40 bar Spindle cooling device: Yes probe: 3-D Heidenhain B-axis: Control: Heidenhain iTNC530 Spindle speed: 20-18,000 rpm Spindle mount: SK40 tool magazine: 28 seats Internal coolant supply (IKZ): 40 bar Spindle cooling device: Yes probe: 3-D Heidenhain