Komotzki Mech. Bearbeitung e.K.

Condition: used, Year of construction: 2002, controller manufacturer: Siemens, controller model: 840D, Working Area – Milling Travel X-axis: 4000 mm Travel Y-axis: 3500 mm Travel Z-axis: 1500 mm Travel W-axis: 1500 mm Portal / Upright Clearance: 2500 mm Table Clamping area (left-right): 3000 mm Clamping area (front-back): 2000 mm Workpiece weight (max): 10,000 kg Working Spindle / Head Vertical working spindle Speed range from: 5 rpm Speed range up to: 6000 rpm Number of gear stages: 2 Drive power (max): 45 kW Torque (max): 1250 Nm Max. distance spindle to clamping surface: 3500 mm Isdpfxox I Srbe Aa Eetr Tool Magazine Number of tool positions: 200 Max. tool diameter: 135 mm – With free adjacent position: 250 mm Max. tool length: 400 mm Max. tool weight: 50 kg Dimensions / Weights Space requirement length: 13,000 mm Space requirement width: 11,300 mm Height above floor: 7350 mm Height below floor: 1500 mm Additional Equipment Drilling/Milling Angular milling head: yes automatic tool clamping: yes ball screw drives: yes guideway covers: yes coolant system: yes high-pressure cooling system (internal coolant supply): yes full work area enclosure: yes

Condition: ready for operation (used), Year of construction: 1998, A universal machining center is offered with control: Heidenhain TNC 426. Operating hours: approx. 45380h, spindle hours: approx. 14384h. Viewing possible by appointment. Itedpsx Ivi Dsfx Aa Esr

Condition: ready for operation (used), A defective vertical CNC machining center DMG Mori is available. Travel X/Y/Z: 835mm/510mm/510mm, tool stations: 20, tool holder: SK40, speed: 10000rpm, table dimensions X/Y: 1000mm/560mm, T-slot spacing: 100mm, max. table load: 800kg, table height: 720mm. Control: Heidenhain TNC 530, operating hours: approx. 29836h. Either the pneumatic release cylinder or the spindle is defective. Documentation available. On-site inspection is possible. Itodpfex Ivkzex Aa Eor

Condition: ready for operation (used), Year of construction: 2015, A CNC vertical long-bed machining center Mazak is available. Travel X/Y/Z: 3000mm/800mm/720mm, B-axis: 110°, C-axis: 360°, table diameter: 600mm, long-bed table dimensions X/Y: 3500mm/820mm, max. table load: 2500kg, spindle interface: BT40, speed: 18000rpm, rapid traverse: 50m/min, tool stations: 48, coolant pressure: 70bar. Machine dimensions X/Y/Z: approx. 5250mm/3650mm/3200mm, weight: approx. 16100kg, control: Mazatrol Matrix 2, spindle hours: 18502h. Including rotary table Nikken CNC 601MA, high-pressure coolant, center partition wall, Renishaw probe, touch probe RMP 60Q, CAD/CAM software Topsolid 7.18 and postprocessor. Documentation available. An on-site inspection is possible. Ijdpfox Ih Dmox Aa Eotr

Condition: used, Year of construction: 2007, x-travel 1.050 mm y-travel 610 mm z-travel 610 mm control HEIDENHAIN iTNC 530 Distance between table and spindle 100-710 mm table-size 1.200 x 600 mm table weight 1.200 Kg rapid travel x/y/z 30.000/20.000 mm/min feed 12.000 m/min spindle taper BT-40 spindle turning speed range 60 - 10.000 U/min spindle drive 7,5/11 kW Tools changer 20 pos. Internal cooling system 20 bar Chip coveyor 2 handwheel HEIDENHAIN HR-410 Isdpfjx Hp Dlsx Aa Eetr tool diameter 100 mm tool length - max. 320 mm weight of tools max. 10 kg weight of the machine ca. 7 t dimensions of the machine ca. 2.900 x 3.420 x 2.888 m Complete installation 4th axis - Rotary table Golden Sun CNCT 321 (4th/5th axis)- Rotary table diameter 200 mm. - Rotary table tailstock - ZF box - Electrical cabinet air conditioning

Condition: used, Year of construction: 2019, Leadwell Vertikal Flerop BC-700T Fanuc 0i-MF controller with 10.4" LCD Chip conveyor + bucket Transformer Without linear scale Pallet package CTS function Air gun / Water gun HSK63 tooling system 12000 rpm spindle CE4 20 bar high pressure pump Automatic workpiece measurement OMP-60 Auto tool length measurement NC-4 Oil skimmer Auto door Network connection Spindle coolant ring X axis: 1300mm Y axis: 610mm Z axis: 610mm vertical / 750mm Horizontal Distance from table top to spindle end : 110-750mm Table LXW: 1480x610mm 600mm rotary table C Axis speed: 120-800Rpm Iodpex Hfx Sefx Aa Eotr Tool storage capacity: 30pcs

Condition: used, Year of construction: 2017, New spindel 2025-08 yearly service by Mazak Servicecenter. includes bar feeder Super 80 Max swing Ø 658 mm Swing over X-slide Ø 658 mm Swing when Y-axis is operating Ø 658 mm Max turning diameter Ø 658 mm Max turning diameter from bar Ø 51 mm (option Ø 65) Max part length 1011mm X axis: 615mm Y axis: +/-130mm z axis: 1077mm B axis: 0,0001Deg / 240° Spindle 1 Spindle nose JIS A2-6 Spindle bore 76 mm Through-hole 51 mm (option Ø 65) Spindle motor AC 22 kW 40% ED Speed range 35-5000 rpm Number of speed ranges Direct drive Max torque 467 Nm 25% ED Max part weight including chuck 300 kg Center height from floor 1235 mm Spindle 2 Spindle nose JIS A2-6 Spindle bore 76 mm Through-hole Not applicable (option Ø 65) Spindle motor AC 18.5 kW 40% ED Speed range 33-5000 rpm Number of speed ranges Direct drive Max torque 325 Nm 40% ED Max part weight including chuck 300 kg Center height from floor 1235 mm C-axis 1 Type Direct drive Rapid feed 555 rpm Working feed 1-5000 degrees/min Minimum programmable increment 0.0001 degree C-axis 2 Type Direct drive Rapid feed 555 rpm Working feed 1-5000 degrees/min Minimum programmable increment 0.0001 degree W-axis Movement 1066 Rapid feed 30 m/min B-axis B-movement 240 degrees Max machining feed (ISO) 40 rpm Minimum programmable increment 0.0001 degree Tool Holder Type: Tool changer Tool Shank Size: 25 x 25 mm Tool Change Time, tool to tool: 1.3 seconds Chip-to-chip time, average: 8 seconds Tool Holder for rotating tools: Capto C6 Tool Holder for turning tools: Capto C6 Max Tool Weight: 12 kg Max Tool Length: 400 mm Clamping Force for Tool (Capto C6): 33 kN Tool Magazine: Number of tool positions: 36 pcs Max Tool Diameter: 90 mm Max Tool Diameter when the position before and after is empty: 125 mm Max Tool Length: 400 mm Max Tool Weight: 12 kg Max Torque for Tool: 9.8 Nm Other: Length: 3990/4910 mm Width: 2800 mm Height: 2720 mm Weight: 13100/16600 kg Power Requirement, continuous: 72.34 kVA Air Requirement, min: 5 kg/cm², 410 liters/min Tool Magazine: 36 tools Standard Equipment: B-axis Capto C6 ATC Auto Recovery Auto power on/off, heating schedule 19” LCD touchscreen Mazak tool identification system including 10 ID chips (for Capto C6) Measurement arm for tool length setting, automatic compensation, and tool breakage detection 8” Chuck Type: Kitagawa B208A6 8” Chuck Type: Kitagawa B208A6 Coolant Tank Coolant Pressure for Upper Turret: Max 5 bar, 23 l/min Set of Manuals: (digital) Smooth Standard Software: Mazacc 2D software (shape comp) Mazacc 2D software för roterande axlar (shape comp) Mazacc 3D High Speed software High Smoothing Control Seamless Corner Control Variable Acceleration Control Ultra High Speed Machining Mode Rapid Overlap ISO/EIA Programming: Lathe and milling spindle start unsynchronized Synchronized threading with rotating tools Macro interruption allowing event-driven ISO/EIA programs Macro programming with 600 additional variable pairs for ISO/EIA Helix interpolation for ISO/EIA Coordinate rotation with G68 for ISO/EIA Polar coordinates, G122 for ISO/EIA Synchronized interpolation X-C-axis G12.1 for ISO/EIA Coordinate systems G54 - G59 + 300 additional for ISO/EIA Direct input of drawing dimensions, e.g. starting corner for ISO/EIA Inverse Time Feed (G93) Itjdpsx Hfl Eefx Aa Eor 3D Cutter Compensation (G40-G42)

Condition: ready for operation (used), Year of construction: 2007, Offered is a travelling-column machining center with pendulum machining incl. one KUKA KRC1 year 1997 (KR150-2). Travel axes: X/Y/Z 2x900mm/600mm/700mm. Main spindle: Kessler DME 112, hollow shaft motor water-cooled: Speed: 30-6000rpm, tool holder: SK40, tool changer: disc 22 stations. Total weight: approx. 10000kg, measuring systems: Heidenhain LC 183, incl. chip conveyor, documentation. Inspection possible by arrangement. Itsdpfsx Hfgcex Aa Ejr

Condition: ready for operation (used), A machining center with 10-station tool changer is offered. Table clamping surface X/Y: 600mm/300mm, travel X/Y/Z: approx. 420mm/300mm/250mm, spindle speed: 6000rpm. Tool holder: BT30. Control: Brother CNC-400, machine weight: approx. 2000kg, including manual. Inspection possible by appointment. Isdpfx Aex Ecu Eea Estr

Condition: used, Year of construction: 2003, Manufacturer: DMG DECKEL MAHO, Model: DMU 125 P retrofit, Year of manufacture: 2003, Serial no.: 11180004143, Control: DMG, Travel X/Y/Z: 1,250 x 880 x 800 mm, Rotary/tilting CNC table 360 x 0.001°, Main spindle drive: 10 kW, Speed range: 20 - 12,000 rpm, Tool changer with 30 stations, Tool holder: HSK 63, Operating hours Run: 13,710 h / Load: 57,369 h, Chip conveyor: Blechtechnik, Skip with forklift receptacle, Belt filter unit: DMG, Accessories: various tool holders. This machine is part of an online auction. Iodpfx Aaex A U Thj Eetr

Condition: used, Year of construction: 2002, Manufacturer: DMG GILDEMEISTER, Model: DMU 160 P, Year of manufacture: 2002, Serial No.: 11220000223, Control system: Heidenhain, Model iTNC 530 (completely overhauled), Travel ranges X/Y/Z: 1,600 x 1,250 x 1,000 mm, Spindle speed: 18,000 rpm, Table dimensions: 1,250 x 1,500 mm, Tool changer: 60 positions, Tool holder: HSK 100, Rapid traverse: 60 m/min, Feed rate: 20 – 15,000 mm/min, Table rotation speed: 10 rpm, Operating hours: running 13,879 h / load 49,304 h, Oil mist extraction, Chip conveyor, Manufacturer: Blechtechnik, Model: DMU 160 P/U, Year: 2002, Band filter system, Manufacturer: Bürener Maschinenfabrik GmbH, Year: 2002, Model: KA980, Accessories package consisting of: telescopic drawer cabinet, 5 drawers, contents: various T-slot nuts, tool holders, clamps. Itjdpfxsx A U Sqe Aa Eer This machine is part of an online auction.

Condition: ready for operation (used), Year of construction: 2010, Workpiece diameter: 500mm, workpiece height: 730mm, travel X/Y/Z: 630mm/765mm/600mm, A-axis: -120°/+30°, C-axis: +/-360°, max. table load: 500kg, spindle interface: HSK-A63, speed: 18000rpm, rapid traverse: 52m/min, feed rate: 52m/min, rotary table diameter: 610mm, tool positions: 30, control: Mazak Mazatrol Matrix. Documentation available. An on-site inspection is possible. The machine is located in China. Iodpfx Aajx Aunxs Eotr

Condition: used, Year of construction: 2019, x-travel 900 mm y-travel 550 mm z-travel 500 mm Control FANUC 31i-b tool change unit 30 pos. table-size 1.000 x 500 mm Ijdjx Ak E Hopfx Aa Estr table weight 700 Kg spindle taper HSK - A 63 number of spindle speeds 20.000 U/min/rpm Spindle power 22 Kw Working hours 10.816 h Spindle hours 2.352 h Distance between table and spindle 150/690 mm weight of the machine ca. 9 t dimensions of the machine ca. 2.530 x 2.900 x 3.064 m

Condition: used, Make: WMZ / PITTLER, Model: PVSL N1 2/2, Year of manufacture: 2009, Machine No.: ZN022, Control: Siemens Sinumerik 840D sl Powerline, incl. electronic handwheel, 2 spindles, 2 work areas, 2 cross slides, max. turning diameter: 140 mm, max. workpiece height: 80 mm, max. spindle speed: 6,300 rpm, 2x 8-position turrets, live tooling stations, chip conveyor by Knoll, extraction unit by ILT, recooling unit by Hydac, workpiece automation with raw part and finished part storage +++ Attention: Machine is part of an online auction! +++ Iodpfex Ahfwex Aa Ejtr

Condition: ready for operation (used), Year of construction: 2010, Offered is a Röders RXP 300 high-speed machining center, year 2010, machine hours approx. 120648h, spindle hours approx. 71200h, HSK-25 high-frequency spindle 50000rpm, HG sensor, high-accuracy package incl. spindle cooling, Renishaw probe, bar magazine with 18 tool stations. An inspection is possible by appointment. Itsdpexyk Tfofx Aa Eor

Condition: ready for operation (used), Year of construction: 2005, Offered is a Röders RXP 500 high-precision milling machine year 2005, approx. 160763h, spindle approx. 100000h incl. HSK-25 high-frequency spindle with 50000rpm, 42-fold chain magazine, HG sensor, high-accuracy option incl. spindle cooling as well as Renishaw probe, machine weight approx. 5500kg. Viewing is possible by arrangement. Itodoxyk S Ispfx Aa Eer

Condition: good (used), Year of construction: 2016, CNC MillPlus IT V610 – ERGOline, spindle 18,000 rpm, taper SK40, ATC 120 positions, coolant through spindle, SN 11690001133, weight 9,460 kg, power-on hours 20,295 h, spindle hours 8,688 h Iedpfx Aexyi Dpsa Eotr

Condition: good (used), MIKRON UCP 600 VARIO is a 5‑axis machining center engineered for high precision, accuracy and reliability in complex machining. Table 320×320 mm; travels X600 Y450 Z450; indexing C n x360°; head B -115/+30°. 30‑station tool magazine; tool Ø max 80 mm, length 200 mm, weight 8 kg; spindle nose HSK‑A63. Spindle stepless 0–20,000 rpm, 30 kW, 91 Nm torque. Feed 15,000 mm/min, rapid 22 m/min; power 3x400 V 50 Hz. Machine weight ~7,700 kg; dims L6820×W4800×H2540(2810) mm. Options: paper filtration, water cooler, chip conveyor, EROWA UPC table, electronic handwheel, lamp, status light. 4+5 axis revised 2023. Achieves tight tolerances; suited to automotive, aerospace, medical, watchmaking and machine‑tool sectors. Itedpfjxx U U Rjx Aa Eer

Condition: good (used), CHIRON FZ 08 KS Magnum is a 5‑axis machining center engineered for precision, high accuracy and reliable production. Travels X450×Y270×Z310 mm; drilling 12 mm; tapping M8. Tool magazine 24 pos., tool Ø max 47 mm (100 mm free), length 160 mm, tool wt 1.2 kg. Spindle HSK‑A40 0–36000 rpm; spindle motor 7 kW; rapid 75 m/min; 3×400V 50Hz; air 6 bar; installed power 14 kW (19 kVA); machine ≈3400 kg; dims 2308×1405×2447 mm. Features: tool‑break control, RS232, switch‑cabinet air‑con, status light. Delivers tight tolerances for automotive, aerospace, medical, watchmaking. Iodpexx U Nzofx Aa Eotr

Condition: excellent (used), MIKRON HPM 800 U is a 5‑axis machining center for precision, high accuracy and reliability. Table 630×440 mm, 5 T‑slots, table load 800 kg; travels X800 Y800 Z550 mm; A +91/‑121°, C 360°. HSK‑A63, spindle‑nose to table 600 mm; 115 tools, Ø max 80 mm (160 free), tool length 350 mm. Spindle 0–20000 t/min; feed 0–20000 mm/min; rapid 45 m/min; accel. 6 m/s; max feed force 6000 N; 3×400V 50Hz; 55 kW; weight ~15000 kg; size 3505×3100×2980 mm. Accessories: high‑pressure coolant, paper filtration, 2 pallets, touch probe, laser tool preset, chip conveyor. Suited to tight tolerances in automotive, aerospace, medical, watchmaking. Iodpoxx U Nnjfx Aa Estr

Condition: used, DMG HSC 55 linear is a 5-axis machining center designed for precision, high accuracy and reliable performance. Travels X 450 mm, Y 650 mm, Z 460 mm; A-axis -10/+110°; tool magazine 120 places; tool Ø max 80 mm, length 250 mm, weight 6 kg; spindle taper HSK 63. Spindle speeds 2–28,000 min⁻¹; spindle power 38/28 kW; supply 3x400 V 50 Hz; total power 70 kVA; machine weight ≈9500 kg; dims L3210×W2930×H2900 mm. Delivers tight tolerances; typical applications: automotive, aerospace, medical, watchmaking and toolmaking. Ijdpfx Aaexx U Iwj Ejtr

Condition: ready for operation (used), Year of construction: 2021, A vertical CNC machining center Spinner is available. Travel X/Y/Z: 850mm/510mm/510mm, speed: approx. 12000rpm, tool holder: SK40, tool stations: 30, rapid traverse: 36m/min, feed rate: 15m/min, table dimensions X/Y: 1000mm/510mm, max. table load: 600kg. Machine dimensions X/Y/Z: approx. 1900mm/1900mm/2450mm, weight: approx. 4500kg, control: Heidenhain TNC, operating hours: 3891h, spindle hours: 702h. Including coolant system, chip conveyor, oil mist extraction and probe. Documentation vorhanden. An on site inspection is possible. Expected to be available from April 2026. Iedexwywnspfx Aa Ejtr

Condition: ready for operation (used), Year of construction: 2007, Travel X/Y/Z: 800mm/700mm/700mm, clamping area: 500mm/500mm, max. pallet load capacity: 1000kg, max. load difference: 500kg, table speed: 80rpm, feed rate: 60m/min, rapid traverse: 60m/min, tool holder: HSK-A100, speed: 6000rpm, tool stations: 60, positioning accuracy: 0.007mm, pallet dimensions X/Y: 500mm/630mm, weight: approx. 21000kg. Documentation available. An on-site inspection is possible. Iodjxwcuiepfx Aa Eotr

Condition: ready for operation (used), Year of construction: 2004, Travel X/Y/Z: 3000mm/800mm/800mm, speed: 9000rpm, tool positions: 48, rapid traverse: 30m/min, table dimensions X/Y: 3500mm/900mm, weight: approx. 12000kg. Documentation available. An on-site inspection is possible. Iedpfx Aasxwcuce Ejtr

Condition: ready for operation (used), Year of construction: 2000, Travel X/Y/Z: 1150mm/710mm/710mm, table dimensions X/Y: 1500mm/800mm, rotary table diameter: 800mm, max. table load: 900kg/450kg, spindle speed: 12000rpm, tool holder: SK40, tool stations: 32, rapid traverse: 30m/min, feed rate: 15m/min. Machine dimensions X/Y/Z: 5000mm/4000mm/3000mm, weight: approx. 10000kg. Documentation available. An on-site inspection is possible. Expected to be available in February 2026. Ijdsxv A Hvjpfx Aa Eetr