Eterix Sweden AB

Year of construction: 2005, condition: ready for operation (used), Cutting dimensions X/Y: 3000mm/2000mm. The cutting head of the machine currently cannot be moved downward or upward. This problem can be resolved with a small spare part. The machine was used in the stone processing industry. Documentation available. An on site inspection is possible. Rjdpfx Aoyypmgecver

Year of construction: 2015, condition: ready for operation (used), A complete longitudinal beam welding system (vehicle carrier) Merkle with a tack welding station, a cooling station and a longitudinal beam welding machine is available. Beam height range: 70mm-500mm, max. beam length: 13700mm, flange width: 120mm/150mm, flange thickness range: 5mm-20mm, web plate thickness range: 3mm-10mm, clear width: 85mm-500mm, web offset at 15° transition: 50mm. 1) Welding system, track length: 20m, rotating device: 0°-45°, total clamping and tack welding range: 14300mm, guide spacing: 500mm, roller conveyor height: 800mm, welding process: MIG/MAG-Pulse-Arc, travel speed: 6m/min, vertical stroke: 800mm, horizontal stroke: 2x270mm, power sources: 2x HighPulse 550 RS, torch: MSB 400W. 2) Tack welding device, tack welding position: 45°, max. changeover time: 10min. 3) Transport and cooling line, tack welding area roller conveyor length: 15000mm, buffer and cooling area roller conveyor length: 15180mm, welding area roller conveyor length: 18055mm, roller diameter tack/buffer/welding: 80mm/80mm/200mm, roller width: 245mm/245mm/2200mm. Documentation vorhanden. An on-site inspection is possible. Rodpfx Asyx H Hnscvor

Year of construction: 2025, condition: new, Operates with 3 Phase 400V-50/60 Hz mains voltage and generators, tolerates voltage fluctuations up to 15%. Due to inverter technology, energy efficiency is higher than the conventional machines. Excellent welding characteristics with all types of solid and flux cored wires with CO2 or Mix gases. 4 Wheel Drive system, offers very powerful feedability for longer torches and offers less deformation on soft wires such as aluminum and flux cored wires. Welding voltage, wire feed speed (welding current) is adjusted from the panel in front of the wire feeder. Optimum welding parameters can be obtained from the printed table inside of the wire feed cabinet. Manual wire feeding & gas valve buttons, Trigger Mode (2/4), Spot mode are available on the wire feeder. Soft Start, Pre-gas, Post-gas, Crater Filling, Burn-Back, Flow Sensor settings are adjusted from the digital panel of the wire feeding system. Rodpfxeyx Hpij Acvjr ø300 mm, ø270 mm and ø200 mm spools and drums of any size can be used. 24V AC outlet for CO2 gas heater. Built in gas cylinder platform with large wheels to ease mobility in workshops. The Separate wire feeder standard harness length is 5 m and can be extended up to 30 m upon request (M-MW models). Protected against voltage fluctuations. Designed also for outdoor use, protection class is IP 23. Water cooling unit for water cooled torches provides powerful cooling even at very hot climates. (Water-cooled (W) models) Standard accessories come with the machine.

Year of construction: 2006, condition: ready for operation (used), A CNC dual-head waterjet cutting system Bystronic is available. Working dimensions X/Y/Z: 4000mm/2250mm/230mm, cutting heads: 2, max. cutting carriage distance: 1150mm, simultaneous movement: 84m/min, machine tolerance: +/-0.1mm, repeatability: +/-0.05mm, max. frame load capacity: 7000kg, max. workpiece weight: 6300kg, max. round part diameter and length: 440mm/3700mm, max. operating pressure: 3800bar. Machine dimensions X/Y/Z: approx. 9000mm/7550mm/2050mm, weight: approx. 10000kg, operating hours: approx. 41130h, cutting hours head 1/head 2: 13720h/956h. The second head was removed and the cutting unit was mounted on head 1 as a spare part. However, after procurement of a new cutting head, the system can operate with two abrasive tools. The drilling spindle is seized. Including a desalination system and all spare parts. Documentation available. An on-site inspection is possible. Redpfxeywy Rdo Acvjr

Year of construction: 2017, condition: ready for operation (used), Two welding cells are available, each with two KUKA robots, one for workpiece handling and one for the welding process. 1) Welding process: resistance spot welding, robot: 2x KUKA KR 60-3, max. payload: 60kg, max. reach: 2033mm, repeatability: +/-0.06mm, controller: KR C4, axes: 6, power source: Genius HWI 408, max. output current: 600A, rated power: 80kVA, cell dimensions X/Y: approx. 7450mm/5250mm, robot hours 1/2: 4500h/8200h. 2) Welding process: resistance spot welding, robot: KUKA KR300 R2500, max. payload: 300kg, max. reach: 2496mm, repeatability: +/-0.6mm, controller: KR C4, axes: 6, power source: Genius HWI 408, max. output current: 600A, rated power: 80kVA, cell dimensions X/Y: approx. 7450mm/5250mm, robot hours 1/2: 2700h/6100h. Documentation available. An on-site inspection is possible. Individual sale possible. Rsdpfsyv H Exex Acvjr

Year of construction: 2020, condition: used, Mains voltage 400V, 3 Phasen, N, PE, 50 Power consumption 40 KVA Network backup 32 A PTA main flow (25% ED) 280 A Pilot main current adjustable 5 - 20 A PTA burner PT 200 S-AUT In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved. Redpfx Ajyu U E Njcvjr

Year of construction: 2008, condition: ready for operation (used), A Bystronic CNC laser cutting system is available. Travel X/Y/Z: 4020mm/2020mm/170mm, max. sheet weight: 1500kg, positioning speed: 60m/min, simultaneous speed: 80m/min, positioning accuracy: +/-0.1mm, repeat accuracy: +/-0.05mm, laser: CO2, laser source: ByLaser 4400, laser power: 4400W, overall system dimensions X/Y/Z: approx. 8000mm/15000mm/2.5mm, cutting time: 17469h, power on: 35200h. Including two spare cutting heads 7.5in and 5in as well as various spare parts. Documentation available. An on-site inspection is possible. Expected to be available from June 2026. Rsdpfx Aceyu T D Rever

Year of construction: 2021, condition: ready for operation (used), A laser cross-welding system is offered. Fiber laser 1500W water-cooled, cooling unit integrated, pallet truck guide, shielding gas supply, weld seam pressing device, remote access RMACC01 SECOMEA, strip width max.: 110mm, strip material: steel: 0.25mm-3.0mm, C steel: 0.25mm-2.5mm, aluminum: 0.25mm-2.5mm, copper: 0.20mm-1.2mm, dimensions W/H/L: 650mm/2054mm/1050mm, weight: approx. 650kg. Inspection possible by appointment. Redpoyugl Uefx Acvjr

Condition: ready for operation (used), 1 x ENABL SAW circumferential seam C&B, including 1 welding head with 3 wires. Welding range: ø6.5 to ø11 m. Expandable up to ø13 m. 1 system. Rjdjyt Rmgepfx Acvsr Already disassembled without power (currently likely without PSU, but a PSU may be available). Inspection welcome north of Flensburg. B2B sale only.

Condition: ready for operation (used), 1 x ENABL SAW circumferential seam gantry including 2 welding heads, each with 3 wires (without power supply). Welding possible from ø6.5 to ø11 m. Expandable up to ø13 m. 5 systems. Rsdpfsyt Ri Ujx Acvor Inspection welcome near Flensburg. B2B sales only. More photos available upon request.

Year of construction: 2010, condition: ready for operation (used), A robot-assisted welding system from Cloos with a Kuka robot is available. Robot weight: 1155kg, control system: Qirox C Romat 520, control weight: 300kg, robot axes: 6. Documentation available. An on-site inspection is possible. Redpfx Aoyt N Ayecver

Condition: used, For sale: Professional pipe beveling/chamfering machine by FEIN with GF (Georg Fischer) RA4 head, mounted on a solid workshop stand for pipe processing. This device is used for beveling pipe ends prior to welding—preparing a V-type weld edge. Industrial equipment used in pipeline workshops, industrial installations, and when constructing process plant systems. The machine is of very robust construction, made in Germany. Comfortable operation thanks to a stable stand. Technical data • Drive manufacturer: FEIN – Made in Germany • Model: 680 CB1641 • Power: 1600 W • Voltage: 200–240 V • Frequency: 50–60 Hz • Current: 8.8 A • Speed: 150–270 rpm Head • Manufacturer: Georg Fischer (GF) • Type: RA4 Applications • Pipe beveling • Pipe preparation for welding • Pipeline work • Welding workshops • Industrial installations Visual and technical condition as shown in the photos. Solid industrial-grade machine. Rodpfxeyt Ifge Acvjr

Year of construction: 2007, condition: ready for operation (used), Cutting dimensions X/Y: 2000mm/3000mm, Z-axis stroke: 230mm, machine tolerance: +/-0.05mm/m, repeatability: +/-0.025mm/m, simultaneous movement: 56m/min, max. cutting speed: 30m/min, max. material thickness: 200mm, max. load capacity: 790kg/m², max. workpiece weight: 4740mm, max. clamping material thickness: 50mm, max. pump pressure: 3800bar, max. working pressure: 3600bar, machine weight: approx. 11300kg, working hours: 18111h. Documentation available. An on-site inspection is possible. Redpsyttwujfx Acvsr

Condition: new, Year of construction: 2026, functionality: fully functional, The LCW 3000W is a compact and versatile 4-in-1 handheld laser system engineered for high productivity and operator convenience. Designed for industrial use, the machine unites welding, laser cleaning, cutting, and weld seam cleaning capabilities, making it highly suitable for manufacturing, repair, and maintenance environments. This unit is based on a Raycus 3000W fiber laser source and is equipped with an industrial water chiller for stable performance and outstanding reliability. Its touchscreen control system enables rapid parameter adjustments, saving of operating modes, as well as real-time diagnostics and warnings. An additional operator control panel ensures easy modification of parameters during use. The laser head is optimized for both welding and cleaning tasks, featuring optical protection and support for various welding processes, including spot welding, continuous welding, fish-scale welding, and full seam welding. The result is a clean, uniform, and visually appealing weld seam. The machine is also capable of removing rust, paint, resin, oil, dirt, and oxide layers from surfaces. Key Advantages: - 4-in-1 functionality: welding / cleaning / cutting / weld seam cleaning - Raycus 3000W fiber laser source - Handheld laser head for welding and cleaning - 10 m standard optical fiber length (up to 15 m maximum) - Intelligent touchscreen control system - Multi-language user interface - Industrial chiller-based water cooling - Red-light positioning feature - Automatic wire feeder - Supplied with safety glasses, working lens, standard accessories, and a spool of welding wire Technical Specifications: ----- Model: LCW 3000W Laser Type: Raycus Fiber Laser Laser Power: 3000 W Operating Voltage: 380 V Wavelength: 1064 nm Fiber Length: 10 m standard, up to 15 m maximum Welding Speed: 30–120 mm/s Cooling System: Industrial water chiller Ambient Operating Temperature: 15–35 °C Recommended Welding Thickness: 0.5–3 mm Cleaning Width: 0–80 mm Focal Length / Working Distance: 600 mm Applications The machine is suitable for: - Iron - Stainless steel - Aluminum alloys - Other metals Typical uses include: - Welding sheet metal and profiles - Pre-processing surface cleaning - Removal of rust, paint, oil, and oxides - Final weld seam cleaning Scope of Supply LCW 3000W machine complete with: - Handheld laser head - Automatic wire feeder - Laser safety glasses - Additional working lens - Spool of welding wire - Complete set of standard spare parts and accessories Rsdpfx Aeyr D A Eecvsr

Year of construction: 2014, condition: ready for operation (used), A welding turning device Jucat consisting of two parts with the workpiece in the middle is available. Design: 2-column system, max. load capacity: 6000kg, rotational torque: 800Nm, tilting torque: 7500Nm, lifting range: 800mm-2000mm, lifting speed: 40mm/s, max. speed: 2rpm, clamping plate diameter: 750mm, operating pressure: 120bar. Machine dimensions X/Y/Z: approx. 2500mm/1100mm/1100mm, weight: approx. 2x1000kg. Documentation available. An on-site inspection is possible. Rjdeyrg Hyopfx Acvor

Year of construction: 2015, condition: ready for operation (used), A welding turning device Jucat, consisting of two parts with the workpiece in the middle, is available. Design: 2-column system, max. load capacity: 6000kg, rotation torque: 800Nm, tilting torque: 7500Nm, lifting range: 800mm-2000mm, lifting speed: 40mm/s, max. rotational speed: 2rpm, clamping plate diameter: 750mm, operating pressure: 120bar. Machine dimensions X/Y/Z: approx. 2500mm/1100mm/1100mm, weight: approx. 2x1000kg. Documentation available. An on-site inspection is possible. Rjdjyrg H Hepfx Acvsr

Condition: used, functionality: unexamined, Semi-automatic transformer core welding machine with ESS stacking units SGE 30 - 84 No. 90101565, SGI 30 ß 84, tooling on the machine EI 84. The stacked sheets are pushed into the machine using the coil, welded and inspected during transport out of the machine. ESS welding equipment with wire feed. Rjdpfoyqmt Dex Acvor

Year of construction: 2017, condition: used, machine/vehicle number: 71171217, Fibre-coupled diode laser type LDF with beam converter, VGA, LLK-D, power 6000W, beam quality/beam parameter product 8mm mrad Redpfeyn Nl Rex Acver

Condition: used, functionality: unexamined, No. 453 Ess TM 30-151MS-1/2 No. 7/0501 Tool EI 84, BI210770 No. 454 Grau ASM 30-60 1990 No. 7.040.90, EI 30-60, BI210790 No. 455 Ess TM 30-122 Tool EI 66 TM 30-122 /S1/2-2/N4, No. 82/0701, Control PLS 510/MS54/82/0702 No. 456 Grau ASM 60-120, 1988, No. 8.020.88 BI210810 No. 457 ESS TMR /IA/S4/30-84 EI 84 Rotating table No. 83, Control type PLS 53, No. 83, Tools EI 48, 54, 60, 66, 84, 66/84 No. 478 Waasner TKSM/H No. 5709 EI 66, Cooler and transformers missing No. 479 Waasner TKSM/H. No. 5519 EI 66, Cooler and transformers missing No. 480 Ess TM 30-151 MT-MS-40-4 No. 9/1105 9/1106 1979 MIG / MAG Tools EI 66, EI 78 Rodpfxoyntu Aj Acvor

Year of construction: 2016, condition: ready for operation (used), An industrial TIG welding power source Merkle in AC/DC version is available. Insulation class: S, Cooling: AF, Voltage: 400V, Power factor: 0.95. Documentation available. An on-site inspection is possible. Rjdjynatrepfx Acver

Condition: excellent (used), Advantages of the GF4: - Larger working range - Clamping jaws made of aluminum - Motor enables cutting of pipes made from very hard materials - 30% weight reduction due to new body design - Laser cutting position indicator - New ergonomic handle - Power cable with swivel and quick connector The GF4 machine can be operated with the AVM automatic rotation module. Technical specifications: - Pipe outer diameter [mm]: 12 - 120 - Pipe wall thickness [mm]: 1 - 9 - Minimum pipe inner diameter (63 mm blade) [mm]: 21 - Minimum pipe inner diameter (68 mm blade) [mm]: 16 - Minimum pipe inner diameter (80 mm blade) [mm]: 4 - Built-in electronic speed controller: 65 - 215 rpm - Power: 1.8 kW without AVM / 1.9 kW with AVM, 200-240 V, 50/60 Hz - Protection class: II - Vibration level (EN 2662, part 1): 2.5 m/s² - Noise level: 79 dB (A) The GF series machines are orbital pipe and elbow cutting machines. The pipes to be cut are clamped in a self-centering, prismatic vice, which prevents deformation. Pipe diameter and tool speed can be easily set via intuitive controls, depending on the material type. The cutting device is guided manually around the pipe, while the electrically driven blade cuts or bevels the pipe edge. This is a planetary cutting method introduced by Georg Fischer. Orbital cutting is a time- and cost-saving process: - Perpendicular, flat, and burr-free cuts Redoym Unzopfx Acvor - Pipe ends prepared for various joining techniques without additional processing - Cold cutting - No overheating, preventing intergranular corrosion that could cause material cracking - Fast cutting - Saves time and money - Pipe edge beveling - Pipe ends can be beveled simultaneously during the cutting process or separately Optional parts: GF and RA machines can be supplied with either an automatic rotation module (AVM) or manual module (MVM). The AVM module continuously monitors cutting speed according to torque and set parameters. The MVM module, utilizing a gear and handle, enables effortless rotation of the machine head at a constant speed.

Year of construction: 2012, condition: not inspected (used), functionality: unexamined, overall weight: 500 kg, total length: 3,000 mm, total width: 1,000 mm, total height: 1,500 mm, No reserve price – guaranteed sale to the highest bidder! Bidding constitutes a binding obligation for timely collection either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Beam polarization: 100:1, vertical MACHINE DETAILS Nominal tube voltage at maximum tube current: 533 V Fill voltage at maximum tube current: 530 V Rsdpfx Acoym Rxvevsr Maximum tube current: 65 A Dimensions & Weight Dimensions (L x W x H): 3,000 x 1,000 x 1,500 mm Weight: 500 kg EQUIPMENT Matching components External reference: CES - Lot 138

Year of construction: 2023, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H34008-HW, Welding System for Frame Welding of Tinplate Cans with Comprehensive Peripheral Equipment! The new price of the machine was CHF 800,000! The system comprises the following components: - Can Man X7-300 WeldCenter (Serial no.: H34008-HW) - Sheet Transfer and Storage System PowerFEED (Serial no.: H31723) & PowerSTORE (Serial no.: H31503) - Induction Oven PowerCURE (Serial no.: H33620-HS) - Goudsmit Magnetics Palletising Magnet TPLC12804 - BASCO Leak Tester PRE 1024 GLX - Hyfra SIGMA 28-S Chiller Further configuration details can be found in the attached document. Can Man X7-300 WeldCenter Rjdpfx Aceymxlqovjr TECHNICAL DETAILS (according to manufacturer) - Production output: 100 – 600 pcs/min - Strip speed: 10 – 100 m/min - Sheet thickness: 0.10 mm – 0.28 mm Can body dimensions: - Min. can body dimensions: Ø 52 x 50 (height) mm - Max. can body dimensions: Ø 153 x 320 (height) mm Goudsmit Magnetics Palletising Magnet TPLC12804 TECHNICAL DETAILS - Product diameter: 65 mm – 230 mm - Product weight: max. 5 kg - Pallet size: 1,200 x 800 mm MACHINE DETAILS - Magnet dimensions: 1,226 x 826 mm Pneumatics: - Working pressure: 6 – 8 bar - Air consumption: 8 L/stroke Ambient temperature: -20°C to 40°C Robot interface: Available Vacuum system: Integrated EQUIPMENT - Interface for robotic arm - Integrated vacuum system for handling sheets between can layers - Perforation pattern for robotic arm - Magnet plate (2x) - Vacuum connection (1x) - Pneumatic tubing (3x) - Sensor connection box Hyfra SIGMA 28-S Chiller MACHINE DETAILS Dimensions & Weight: - Dimensions (L x W x H): 715 x 715 x 1,554 mm - Weight: 210 kg EQUIPMENT - Tank volume: 120L - Scroll compressor - Stainless steel frame construction - Automatic water make-up - Bypass valve - Water level indicator - Pressure gauge in water supply - Dry-running protection pump - Ball valve for tank drainage - Fault indication with digital display - High-efficiency condenser - Metal filter cells

Condition: excellent (used), Year of construction: 2015, Technical specifications: Welding robot with 3 axes Number of axes: 3 Travel range: Longitudinal travel: 4,200 mm Transverse travel: 1,200 mm Vertical travel: 1,000 mm Rotary head with motorised tailstock Centre height: 980 mm Centre distance: 4,500 mm Rsdpfxjymnqpo Acvsr Carrying capacity of 1 rotary device: 3,000 kg Power source: FRONIUS Transpuls Synergic 5000 MIG/MAG Welding torch cleaning station: ABICOR BINZEL The seller assumes no liability for typing or data transmission errors. The machine's appearance, technical condition, and wear correspond to its age; used machines are sold without any guarantee or warranty.

Condition: used, SOLID STATE HF WELDER EFD INDUCTION WELDAC 250 kW SCOPE OF SUPPLY 1. Complete welding unit EFD Weldac 250Kw 2. Input Autotransformer 3. Complete cooling unit and water circuit 4. Control desk with PC 5. Existing documentation 6. Output busbar TECHNICAL DATA Manufacturer EFD Induction Rodpfx Asymak Uecver Model WELDAC 250 Nominal power (output power): 250kW Welding-Frequency (nominal): 250 -310Khz Total installed power: 346KVA Nominal power: 250 kW Welding frequency range: 250 -310 kHz Total installed power: 346 kVA