DZ Basic Technology SRL

Condition: ready for operation (used), Year of construction: 2017, operating hours: 14,046 h, functionality: fully functional, machine/vehicle number: 1527000284A, total height: 2,810 mm, total length: 4,050 mm, total width: 2,810 mm, overall weight: 5,830 kg, Equipment: documentation/manual, Product CNC machining center Brand DMG Mori Type CMX 1100V Measurements LxWxH approx. 405x281x281 cm Year 2017 Specifications Serial number 1527000284A, recorded operating hours 14,046, recorded spindle hours 4,395, net weight approx. 5,830 kilograms , 12,000 RPM, spindle-cooled, block guide, Renishaw measuring system, Siemens control. The machine has been disconnected from the power supply and all fluids have been drained . Excludes precision tool holders; includes probe. Details Please note! The buyer is responsible for providing Rcedps Agu Anjfx Akish lifting and hoisting equipment. Please note! The maximum floor load is 1,600 kilograms per square meter.

Condition: repair required (used), Year of construction: 1999, operating hours: 5,050 h, functionality: limited functionality, machine/vehicle number: 2885-0681, total height: 2,540 mm, total length: 1,900 mm, total width: 2,530 mm, Equipment: documentation/manual, Product CNC machining center Brand Deckel Maho Type DMC 63V Measurements WxDxH approx. 190x253x254 cm Year volgens opgave 1999 Specifications Serial number 2885-0681, operating hours: 5,050. Siemens control system. Please note: The circuit board is defective; a replacement part is included and is part of this lot. The machine has been disconnected from the power supply and all fluids have been drained. Details Redpfxe Aguuno Akisch Please note! The buyer is responsible for providing lifting and hoisting equipment. Please note! The maximum floor load is 1,600 kilograms per square meter.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 15,396 h, functionality: fully functional, machine/vehicle number: 1527000168A, total height: 28,100 mm, total length: 4,050 mm, total width: 2,800 mm, overall weight: 5,830 kg, Equipment: documentation/manual, CNC machining center Brand DMG Mori Type CMX 1100V Measurements L x W x H approx. 405 x 280 x 281 cm Year 2017 Specifications Serial number 1527000168A, recorded operating hours: 15,396, recorded spindle hours: 5,102, net weight approx. 5,830 kilograms , 12,000 RPM, spindle-cooled, block guide, Renishaw measuring system, Siemens control. The machine has been disconnected from the power supply and all fluids have been drained . Excludes precision tool holders; includes probe. Details Please note! The buyer is responsible for providing lifting and hoisting equipment. Please note! The maximum floor load is 1,600 kilograms per square meter. Rjdpfx Ae Agunlekijch

Condition: used, Year of construction: 2009, This DECKEL vertical CNC machining center, type: Maho DMC 635 V, will be auctioned off in our industrial auction / machine auction, which includes liquidation of industrial machinery – injection molding machines, CNC machining centers, universal lathes, and more – online. Rcodpfe Agku Hox Akieh You can find this and many other items on our platform.

Condition: used, Year of construction: 2008, This DECKEL vertical CNC machining center, type: Maho DMC 635 V, will be auctioned off online in our industrial auction / machine auction, which includes a clearance sale of industrial machines – injection molding machines, CNC machining centers, universal lathes, and more. Rjdpfxe Agkm Us Akijch You can find this and many other items on our platform.

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 620, total height: 2,742 mm, total width: 2,265 mm, table width: 790 mm, table length: 560 mm, table load: 600 kg, overall weight: 3,900 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 13,000 W, number of slots in tool magazine: 30, tool weight: 6,000 g, product length (max.): 2,441 mm, number of axes: 3, This 3-axis DMG MORI DMC 635 V ecoline was manufactured in 2014. It features an X-axis travel of 635 mm, Y-axis travel of 510 mm, and Z-axis travel of 460 mm. The machine includes a robust table size of 790 x 560 mm and a maximum table load of 600 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMC 635 V ecoline vertical machining centre we have for sale. Contact us for further details. - Control: HEIDENHAIN TNC 620 (MC 7420D / TE 7150 keyboard / SLIMline panel)- Number of Axes: 3 (X, Y, Z)- X-Axis Travel: 635 mm- Y-Axis Travel: 510 mm- Z-Axis Travel: 460 mm- Table Clamping Surface: 790 x 560 mm- Max. Table Load (Center): 600 kg- Table T-Slots: 4 / 14H12, distance 100 mm (1 reference slot 14H7)- Table Height from Floor: 720 mm- Spindle Speed Range: 20 - 12,000 rpm (1/min)- Spindle Drive Power (40% ED / 100% ED): 13 kW / 9 kW- Spindle Torque (40% ED / 100% ED): 83 Nm / 57 Nm- Tool Taper / Interface: SK40 (DIN 69871 / ISO 7388/2 Type A or DIN 69872 Form A/B)- Tool Clamping Force: 8 kN- Tool Magazine Capacity: 30 stations- Max. Tool Diameter (Adjacent Empty / Full): 130 mm / 80 mm- Max. Tool Length: 300 mm- Max. Tool Weight: 6 kg (Max. total magazine tool load: 90 kg)- Rapid Traverse (X / Y / Z): 30 m/min- Feed Rate (X / Y / Z): Continuously programmable up to 20,000 mm/min- Positioning Resolution / Uncertainty: 1 µm / 16 µm (VDI/DGQ 3441)- Coolant Tank Capacity: ~120 l- Machine Weight: ~3,900 kg (3,950 kg with 30-tool magazine)- Apparent Power: 17 kVA- Nominal Line Current (In max): 28 A- Main Fuse: 35 A (Short-circuit breaking capacity: 0.35 kA)- Power Supply: 400 V AC (3/N/PE), 50/60 Hz- Control Voltage: 24 V DC / 230 V AC- Pneumatic Supply Pressure: 5.5 - 8.0 bar (Air consumption: 30 m³/h without blow-off; +20 m³/h continuous)- Machine Dimensions (W x D x H): 1,880 mm (2,265 mm with coolant tank) x 2,441 mm x 2,742 mm (Transport height min: 2,330 mm)- Required Floor Space: 4,500 x 4,400 mm Technical Specification Taper Size SK 40 Rodpo Agb Uvjfx Akiech

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 610 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, controller manufacturer: HEIDENHAIN, controller model: TNC7, spindle speed (max.): 5,000 rpm, number of axes: 3, This 3-axis KUNZMANN WF 610 CNC was manufactured in 2024. It features a longitudinal travel of 610 mm, transverse travel of 400 mm, and vertical travel of 450 mm. The machine is equipped with a 20-station tool changer and a maximum table load of 300 kg. If you are looking to get high-quality milling capabilities, consider the KUNZMANN WF 610 CNC vertical machining centre we have for sale. Contact us for further details. Rjdpfx Aj Af Nzuskioch - Demonstration machine- Spindle Hours: 332 h- Program Run Hours: 310 h- Feed Rate (Rapid Traverse): X/Y/Z up to max. 30/30/15 m/min - Main Drive (Option Installed): SK 40 Motor Spindle, 1 - 12,000 rpm (Swiss made) - Spindle Power: 8.5 kW (S1-100% ED) / 11.5 kW (S6-40% ED) - Spindle Torque: 43 Nm (S1-100% ED at 1,880 rpm) / 58 Nm (S6-40% ED at 1,880 rpm) - Tool Interface: SK 40 DIN ISO 7388-1 Form AD (formerly DIN 69871 AD) with pull stud DIN ISO 7388-3 Form AD (formerly DIN 69872) - Tool Clamping: Mechanical, clamping force 10,000 N, hydraulic release - Vertical Milling Head: Direct-driven, manually tiltable -5/+90°, extendable quill with turnstile (stroke 70 mm, clampable) - Rigid Angle Table Surface: 800 x 425 mm - Table T-Slots: 6 x 14 H7 (pitch 63 mm) - Max. Table Load: 300 kg - Tool Changer: 20-station disc magazine, SK 40 - Max. Tool Diameter: 75 mm (full magazine) / 150 mm (with adjacent empty pots) - Max. Tool Length: 250 mm - Max. Tool Weight: 8 kg - Tool Change Time: approx. 3 s (chip-to-chip approx. 15 s) - Positioning Accuracy (ISO 230-2): 0.008 mm (direct linear measuring systems) - Repeatability (ISO 230-2): 0.006 mm (direct linear measuring systems) - Measuring System: HEIDENHAIN absolute direct linear measuring system (resolution 0.001 mm) - Coolant Through Spindle (IKZ): 50 bar high-pressure pump (26 l/min), 4-stage pressure adjustment (15/25/40/50 bar), 25 µm double switch filter - Internal Air Cooling: Through-spindle air cooling, M-function programmable - External Air Cooling: Flexible articulated hose, M-function programmable - Paper Band Filter Unit: Trommel-mulden filter with 600 l external tank, type VDF150/50/50 (150 g/m²) filter fleece (dimensions: 1800 x 860 x 1620 mm) - Chip Conveyor: Hinge-belt conveyor integrated into 115 l coolant tank, 60° incline, lateral discharge left (height 870 / 1060 / 1200 mm) - Workpiece Probe: HEIDENHAIN TS 460 3D probe (infrared) with SE 661 transceiver - Additional Axes Preparation: 4th axis preparation (axis controller in electrical cabinet, pre-wired interface) - Automation Interface: Preparation kit for EDUCATION4.0 Cobot cell (Harting connector I/O interface, pneumatic connection, plus 2x pneumatic table connections max. 6 bar) - Enclosure Door: Automatic sliding front door driven by belt drive (manual push button & programmable) - Software Option: OCM (Optimized Contour Milling) for advanced trochoidal milling - Handwheel: HEIDENHAIN HR 510 FS electronic handwheel with axis selection and emergency stop - Operating Voltage: 400 V, 50 Hz - Power Consumption: approx. 21 kVA - Control Voltage: 24 V - Compressed Air Supply: 6.5 - 10 bar (min. 6.5 bar required at machine) - Machine Weight: approx. 2,900 kg (with tool changer)

Condition: ready for operation (used), Year of construction: 2013, operating hours: 13,672 h, functionality: fully functional, machine/vehicle number: 1237361A51A, travel distance X-axis: 610 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 570 mm, controller model: Fanuc 0-MD, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of axes: 3 X-axis travel: 610 mm Y-axis travel: 430 mm Z-axis travel: 570 mm Table length: 650 mm Table width: 450 mm Tool holder: BT40 Main spindle power: 15 kW Spindle speed: max. 10,000 rpm Tool magazine capacity: 24 MACHINE DETAILS Control system: Fanuc 0-MD Operating hours: 13,672 h Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,200 x 2,450 mm Weight: 9,000 kg Number of transport packages: 2 Rjdpfxj Af Hc Rs Akioch EQUIPMENT Tool magazine Documentation CE marking

Condition: like new (used), Year of construction: 2016, operating hours: 4,000 h, functionality: fully functional, spindle speed (max.): 42,000 rpm, operating hours of spindle: 4,000 h, number of slots in tool magazine: 38, Note the low operating hours. This machine is in very good condition and comes with many accessories. Rcsdpfxo Afzgwe Akieh

Condition: good (used), Year of construction: 2017, operating hours: 46,510 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, overall weight: 6,650 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 7,658 h, number of slots in tool magazine: 20, Equipment: chip conveyor, Control system: Heidenhain TNC 640 Table surface: 1,100 x 570 mm Max. table load: 1,000 kg Rapid traverse rate X / Y / Z: 42 m/min Chip conveyor Measuring probe Internal cooling lubricant system (IKZ) Rcsde Afymvspfx Akish

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 016-018271-450, travel distance X-axis: 600 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 580 mm, controller model: FANUC 0i-MD, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 600 mm Travel range, Y-axis: 530 mm Travel range, Z-axis: 580 mm Table area: 840 × 500 mm Maximum table load: 800 kg Drive power: 15 kW Spindle speed: 8,000 rpm Tool positions: 20 Tool holder: BT 40 Rcjdpfxo Afxygj Akish MACHINE DETAILS Control system: FANUC 0i-MD EQUIPMENT 20-position tool changer 80 tool holders BT 40

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 610 mm, travel distance Y-axis: 5,110 mm, travel distance Z-axis: 510 mm, controller manufacturer: FANUC, controller model: Series 18i-MB, table load: 500 kg, overall weight: 6,400 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 21,000 W, number of slots in tool magazine: 24, number of axes: 3, This 3-axis Bridgeport XP3-610 (VMC-610 XP3) was manufactured in 2005. It features an X-axis travel of 610 mm, Y-axis travel of 510 mm, and Z-axis travel of 510 mm. The machine includes a worktable with dimensions of 900 × 500 mm and a maximum table load of 500 kg. If you are looking to get high-quality machining capabilities, consider the Bridgeport XP3-610 vertical machining centre we have for sale. Contact us for further details. • Worktable size: 900 × 500 mm • Max workpiece weight: 500 kg Rcjdps Afxtgsfx Akieh • Rapid traverse (X): 43 m/min • Rapid traverse (Y): 43 m/min • Rapid traverse (Z): 36 m/min • Electrical: 400 V, 3-phase, 50 Hz • Full load current: 50 A • Short circuit interrupt rating: 415 V / 10 kA • Manufacturer address (nameplate): Hardinge Bridgeport, Whiteacres, Cambridge Rd, Whetstone, Leic, LE8 6BD, England Technical Specification Taper Size BT 40

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain TNC 426, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 600 mm Table length: 750 mm Table width: 450 mm Rcedpfx Ae Afxpzskijh Spindle speed: max. 10,000 rpm Tool positions: 24 MACHINE DETAILS Control system: Heidenhain TNC 426 EQUIPMENT 24-position tool changer

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, machine/vehicle number: 15405034874, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 20 kVA, controller manufacturer: HEIDENHAIN, controller model: ITNC 530, total height: 2,400 mm, total length: 2,500 mm, total width: 2,100 mm, table width: 560 mm, table length: 790 mm, table load: 600 kg, overall weight: 7,000 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 11,164 h, number of slots in tool magazine: 20, mount diameter: 40 mm, tool length: 300 mm, tool diameter: 80 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 35 A, feed force X-axis: 5,000 N, feed force Y-axis: 5,000 N, feed force Z-axis: 5,000 N, DECKEL MAHO DMC 635 V CNC Vertical Machining Center - Tool holder: SK 40 - Input resolution X/Y/Z: 0.01 mm - Path measuring system resolution X/Y/Z: 0.001 mm - Positioning tolerance in X/Y/Z with indirect measuring system: 0.020 mm, with direct measuring system: 0.008 mm - Max. tool diameter: 80 mm without free spaces, with free spaces: 130 mm - Max. tool length from spindle nose: 300 mm Rcjdpfx Aks Afulmjioh - Max. tool weight with automatic tool changer: 6 kg - Distance between T-slots: 100 mm - Number of clamping slots: 4 Note: without the machine vices shown in the photos! Includes the SK 40 tool holders located in the tool changer, as well as a 3D measuring probe. Note: Spindle needs to be inspected! FCA D-71679 Asperg - loaded onto a truck.

Condition: excellent (used), Year of construction: 1998, • Yang SMV 600, year of manufacture 1998 • • • Travel distances (working area): o X-axis: approx. 600 mm o Y-axis: approx. 410 mm Rodpfx Ako Ad U T Ujiech o Z-axis: approx. 450 mm • Work table: o Dimensions: approx. 750 x 360 mm o Max. table load: approx. 250 kg • Spindle & tools: o Spindle speed: up to 6,000 rpm o Spindle mount: MAS BT 40 o Tool changer: carousel with space for 16 tools o Drive power: approx. 3.7 kW to 5.5 kW • CNC control: o Fanuc 0-MD

Condition: ready for operation (used), Year of construction: 2018, operating hours: 18,600 h, travel distance X-axis: 650 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, controller manufacturer: SIEMENS, controller model: 840D sl, table width: 630 mm, table length: 500 mm, table load: 300 kg, overall weight: 7,420 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 21,000 W, number of slots in tool magazine: 30, number of axes: 5, This 5-axis DMG DMU 50 was manufactured in 2018. It features a working table size of Ø 630 x 500 mm and a maximum table load of 300 kg. The machine is equipped with a high-speed spindle capable of 15,000 rpm and a tool magazine with 30 positions. If you are looking to get high-quality machining capabilities, consider the DMG DMU 50 vertical machining centre we have for sale. Contact us for further details. Control System: CELOS with Siemens 840D sl Operate (21.5-inch ERGOline Multi-Touch display)Machining Type: 5-axis simultaneous machiningWorking Table / NC Swivel Rotary Table: Ø 630 x 500 mmSwivel / Rotary Axes: B: -35° to +110°, C: 360°Rapid Traverse X / Y / Z: 42 m/minMain Spindle: speedMASTER 20 - 15,000 rpm (SK40 / CAT40 taper)Spindle Power: 21 kW (40% duty cycle) / 16 kW (100% duty cycle)Tool Magazine: 30 positions (SK40)Operating Hours (Control/On-Hours): 33,089 hSpindle Hours: 18,597 hInternal Coolant Supply (IKZ): 40 bar / 600 l with paper band filter and cabin rootChip Conveyor: Scraper belt typeOptional Equipment:Renishaw PP60 optical infrared workpiece probe (OMP60)Heidenhain TT160 tool measurement / length, diameter, and breakage detection3D quickSET (kinematics check and correction)ATC (Application Tuning Cycle)Electronic handwheelManual double switch filter (25 µm)Air blast through spindle center (selectable via M-function)Rinsing gun for chip flushingThe image was generated by AI.Images available on request Rsdpfe Ad Rgwox Akioch Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2022, operating hours: 8,703 h, functionality: fully functional, machine/vehicle number: G2713-0032, overall weight: 6,800 kg, Hello. I have a 5-axis CNC milling center, a HYUNDAI KF3500/5A, for sale. The machine is connected and operational. It is in perfect technical condition!!! Low operating hours!!! Only 8703 hours. I have owned the machine since it was new!!! I am the first owner!!! _ Type: 5-axis Milling Center Manufacturer: HYUNDAI Wia Model: KF3500/5A _ 5-Axis Control: HYUNDAI WIA FANUC i Series _ SMART Plus Country of origin: South Korea Year of manufacture: 2022 _ Machine parameters: – Number of axes: 5 – Work table dimensions (length x width): Fi-400 x 335 mm _ 250kg – Maximum spindle speed: 15,000 [rpm] – Tool magazine: 30 pcs. BT40 – Tool measurement probe – Workpiece measurement probe – Spindle power: 18.5/11 [kW] – Axis travel (X/Y/Z) mm: 600/655/500 – A-axis travel = 150° – C-axis travel = full 360° – Rapid traverse speed (X/Y/Z) [m/min]: 36/36/30 – Total power: 25 kVa – Total weight: 6800 kg – Chip conveyor – Oil mist separator Rcedpfx As Adqltskijh

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 710 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 500 mm, nominal power (apparent): 21 kVA, controller manufacturer: HEIDENHAIN, controller model: 407, table load: 500 kg, rotational speed (min.): 5 rpm, rotational speed (max.): 5,000 rpm, overall weight: 3,800 kg, Equipment: documentation/manual, MIKRON MILLING MACHINE, MODEL UME 710 TRAVEL: 710 x 630 x 500 mm SPINDLE: ISO 40 SPINDLE ROTATION SPEED: 5000 RPM Rcjdpfo Adpvwjx Akioh TABLE DIMENSIONS: 1200 x 600 mm MOTORS AND DRIVES: SIEMENS CONTROL: HEIDENHAIN 407 INCLUDES OPERATING AND MAINTENANCE MANUALS AND A SET OF TOOL HOLDERS

Condition: not inspected (used), Year of construction: 1999, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, overall weight: 2,700 kg, Fanuc 21IM 4th axis Rcodps Abl Rljfx Akish travel distances 600 x 400 x 400 mm tool changer BT40 spindle weight 2700 kg

Condition: ready for operation (used), Year of construction: 1998, operating hours: 23,800 h, travel distance X-axis: 600 mm, travel distance Y-axis: 525 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 25, number of axes: 3, This 3-axis DECKEL MAHO DMU 60 E was manufactured in 1998. It features an X-axis travel of 600 mm, Y-axis travel of 525 mm, and Z-axis travel of 500 mm. The machine is equipped with a 25-fold tool changer and a manually swivelable milling head, providing versatility for various machining tasks. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMU 60 E vertical machining centre we have for sale. Contact us for further details. • Milling Head: Manually swivelable • Tool Changer: 25-fold • Tool Holder: SK 40 • Spindle Speed: Up to 12,000 rpm • Operating Hours: Approx. 44,600 hrs. • Spindle Hours: Approx. 23,800 hrs. • Optional Equipment: Chip tray, manual touch probe, coolant unit Technical Specification Taper Size SK 40 Rsdpfo Aazq Eex Akiech

Condition: used, Year of construction: 1998, travel distance X-axis: 600 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 32 m/min, feed rate X-axis: 16 m/min, feed rate Y-axis: 16 m/min, feed rate Z-axis: 16 m/min, table width: 500 mm, table length: 900 mm, table load: 500 kg, spindle speed (max.): 12,000 rpm, spindle nose: BT 40, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 80 mm, tool weight: 8,000 g, Vertical Machining Center Manufacturer: MORI SEIKI Model: SV 400 Year of Manufacture: 1998 Control System: MSD-501 Technical Specifications: X-axis travel: 600 mm Y-axis travel: 430 mm Z-axis travel: 460 mm Table clamping surface: 900 x 500 mm T-slots (quantity x width x spacing): 5 x 18 x 100 mm Table load capacity: 500 kg Distance from spindle nose to table: 150 – 610 mm Spindle speed: 12,000 rpm Torque: 166.7 Nm Tool taper: BT 40 Number of tool stations: 30 positions Max. tool diameter: 80 mm Max. tool diameter (with adjacent pockets empty): 125 mm Max. tool length: 300 mm Max. tool weight: 8 kg Feed rate (X / Y / Z): 16,000 mm/min Rapid traverse (X / Y / Z): 32,000 mm/min Rcodpj Aaq Umsfx Akioh The machine comes from its first owner and has low operating hours. It has been very well maintained and can be inspected under power by appointment. Technical Features & Accessories: - Through-spindle coolant (TSC) - Tool measurement system - 30-station tool changer (BT 40) Accessories, tools, and clamping devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 24 m/min, nominal power (apparent): 16 kVA, controller manufacturer: Heidenhain, total height: 2,950 mm, total length: 2,500 mm, total width: 2,610 mm, overall weight: 7,000 kg, operating hours of spindle: 10,902 h, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Mikron HEM600 Year of manufacture: 2013 Control system: Heidenhain ITNC 620 Spindle hours: 10,902 X-axis: 650 Y-axis: 530 Z-axis: 600 Rapid traverse: X, Y 30 m/min, Z 24 m/min Maximum spindle speed: 9,000 RPM Tool holder: SK40 Tool magazine: 30 positions Chip conveyor Handwheel Rcjdpjz Uxiiofx Akish Coolant nozzle Connected power: 16 kVA Clamping area: 850x560 mm Dimensions: approx. W=2,500 mm / D=2,610 mm / H=2,950 mm Weight: approx. 7,000 kg In very good condition / without clamping devices! Inspection possible at any time while the machine is powered on. Available from approximately the end of November 2026. Upon request and for an additional charge, we can disassemble the machine and load it onto a customer-provided transport vehicle.

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: MVH1009, travel distance X-axis: 610 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 510 mm, overall weight: 5,000 kg, spindle speed (max.): 8,000 rpm, Doosna VM50 Machining Center, fully functional, Siemens control. Spindle taper: BT40 Spindle speed: 0 – 8000 rpm Work table: 700 × 520 mm Axis travel: X=610 mm / Y=760 mm / Z=510 mm Rjdpfx Aoz S Awlokijch Tool magazine: ATC 12 (with arm) Equipment: Automatic tool changer ATC 12 Chip conveyor Spindle coolant system

Condition: good (used), Year of construction: 2007, functionality: fully functional, spindle speed (max.): 10,000 rpm, DECKEL MAHO DMC 635 V – Year of manufacture 2007 Technical data Manufacturer: DECKEL MAHO / DMG Model: DMC 635 V Year of manufacture: 2007 Machine type: Vertical CNC machining center Control system: Siemens Sinumerik 840D Axes: 3 (X / Y / Z) Working area: X-axis travel: 635 mm Y-axis travel: 510 mm Z-axis travel: 460 mm Table clamping area: 790 × 560 mm Max. table load: 600 kg Main spindle: Max. spindle speed: 10,000 rpm Tool holder: SK 40 Tool changer: Automatic tool changer Tool magazine: 20 positions (typical configuration) Equipment: CNC control system Siemens 840D Automatic tool changer Coolant system with external cooling No internal cooling (without coolant through the spindle) No chip conveyor Feed rate and rapid traverse: Rapid traverse X/Y/Z: 30 m/min Max. working feed rate: 20,000 mm/min Dimensions and weight: Machine weight: approx. 3,600 kg Rcedpfxoz Symdo Akieh Installation dimensions: approx. 2,000 × 2,650 × 2,350 mm Total connected load: approx. 20 kVA Operating hours: approx. 24,000 Spindle hours: approx. 7,000 Images will follow.

Condition: excellent (used), Year of construction: 2013, operating hours: 10,326 h, functionality: fully functional, machine/vehicle number: +.1035, total height: 2,720 mm, total length: 3,160 mm, total width: 2,240 mm, overall weight: 4,800 kg, spindle speed (min.): 14,000 rpm, operating hours of spindle: 10,326 h, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, Mikron VCE600Pro Excellent condition!! Year of manufacture: 2013 Spindle hours: 10,326 Control system: Heidenhain iTNC530 Rodpfez Sagljx Akijch DXF file import Handwheel Travel distances: X-axis: 600 / Y-axis: 500 / Z-axis: 540 Spindle: SK40 with 14,000 rpm 24-position tool changer Regulated spindle cooler IKZ internal cooling Band filter Air cooling through the spindle Spray ring for spindle ISO/BT 40 Direct measuring system / linear scales Tool - laser measurement Renishaw 3D probe Renishaw OMP40 Chip conveyor Top condition / without the vises shown in the pictures.