Greub Machines SA

Condition: used, Year of construction: 2006, Lathe DMG Gildemeister CTX 210 Year of manufacture: 2006 Cpsdpfx Asyhlzuofnju

Condition: used, Year of construction: 1996, Lathe Mori Seiki SL 35 Cjdjyhlzbjpfx Afnopu Year of manufacture: 1996

Condition: used, Mazak QTN100IIM, year 2009, Cpsdpeyhh Drsfx Afnou

Condition: good (used), Year of construction: 1992, operating hours: 33,000 h, functionality: fully functional, turning diameter over cross slide: 500 mm, turning length: 900 mm, turning diameter: 250 mm, spindle bore: 65 mm, spindle speed (max.): 4,000 rpm, turning diameter over bed slide: 500 mm, turning diameter over top slide: 300 mm, overall weight: 6,000 kg, bar passage: 65 mm, chuck outer diameter: 250 mm, bar diameter (max.): 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, CNC Lathe Maho 500 with 532 Control System Year of manufacture: 1992 Power-on hours: approx. 33,000, spindle hours approx. 8,000. Cedpfsyha Nmox Afnopu Equipped with driven tools VDI40 and C-axis, without Y-axis. Automatic tool measurement on the machine via Tooleye (currently not in use). Röhm wedge bar chuck ø250 x ø65, spindle speed 4000 rpm, driven tools. Röhm collet chuck from 3 to 42 mm and from 43 to 80 mm diameter without collets (optional). 6 driven tools, 3x vertical / 3x horizontal. Turret with 12 stations, 6 driven tools. Tool holder VDI40. Various tool holders with assorted tools and different soft jaws as well as claw jaws included. The machine was originally operated in a sheltered workshop and saw little usage. It has also seen limited operation with us. The driven tools have probably been used only three times. It is in very good condition and still operates with the same precision as a new machine. All axes and the spindle run smoothly and without any unusual noise. The machine is sold with the accessories shown in the photographs. The quill of the tailstock shows error 27 and 120 when in use. I suspect a defective limit switch is the cause. Otherwise, the machine works flawlessly. The machine may be inspected and demonstrated under power at our facility. The collet chuck can be purchased additionally and is not included in the price.

Condition: ready for operation (used), functionality: fully functional, MACHINE IN STOCK – READY FOR IMMEDIATE DELIVERY Cpjdpfxeygx Sko Afnou

Condition: excellent (used), Year of construction: 2006, EMCOturn E45 CNC lathe with C-axis with barfeeder Year: 2006 turning diameter 220 mm turning length 310 mm control Siemens 840D turning diameter over bed 430 mm spindle bore 45 mm spindle tunring speed 6.300 U/min x-travel 160 mm z-travel 310 mm number of tool places 12 Positions C-axis driven tools total power requirement 17 kW Transport dimensions ca. 3,3 x 1,5 x 1,95 m machine weight ca. 3.300 kg Accessories/options: - barfeeder for 1.5 meter bars - C-axis and driven tools - driven tool holders axial and radial - static tool holders - documentations - backup - footpedal - tailstock - parts cather - collet type chuck with collets Cjdpjygtgpefx Afnepu - 3-jaw hydraulic chuck - coolant tank

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: P20M0199, turning diameter over cross slide: 250 mm, turning length: 600 mm, turning diameter: 300 mm, spindle bore: 60 mm, spindle speed (max.): 2,000 rpm, Equipment: documentation/manual, CNC MODEL: FANUC SERIES 18-T Codpeygl Ixjfx Afnopu MACHINE IN EXCELLENT CONDITION, USED ONLY FOR FINISHING OPERATIONS VDI TURRET

Condition: good (used), functionality: fully functional, turning length: 350 mm, turning diameter: 220 mm, spindle bore: 50 mm, Nakamura Tome CNC Lathe Model: TMC 20 Control: Fanuc OTC Capacity: 220 x 350mm With: 200mm 3 Jaw Power Chuck Cpodoygkzdopfx Afnju Spindle Bore 50mm

Condition: ready for operation (used), Year of construction: 1997, operating hours: 38,000 h, functionality: fully functional, machine/vehicle number: 325202, turning length: 305 mm, turning diameter: 210 mm, rotational speed (max.): 5,000 rpm, bar passage: 42 mm, controller model: Heidenhain Elektro Pilot 1190, TECHNICAL DETAILS Swing diameter over bed: 440 mm Swing diameter over cross slide: 210 mm Turning length: 305 mm Bar capacity: 42 mm Spindle speed: 5,000 rpm Turret: 12 stations Tool holder: VDI 20 MACHINE DETAILS Control: Heidenhain Elektro Pilot 1190 Dimensions & Weight Dimensions (L x W x H): 2,800 x 1,651 x 1,771 mm Machine weight: approx. 3,000 kg Power-on hours: approx. 38,000 h EQUIPMENT Coolant system Tailstock Cedpfx Afjyfgttonepu Documentation

Condition: used, turning diameter 240 mm turning length 530 mm control Siemens 840D SL swing diameter 560 mm x-travel 207,5 mm z-travel 530 mm turning speeds 6000 U/min 12 Stk. Cjdpfxjycxibe Afnopu total power requirement --- kW weight of the machine ca. 6,1 t

Condition: good (used), Year of construction: 2008, functionality: fully functional, CNC Lathe Weiler DZ 42 Year of manufacture: 2008 Control: Siemens 840D / Shopturn Manual loading up to D 220 mm Material passage: 42 mm Max. turning length: 450 mm Spindle speed: 6300 rpm Machining Turret with 16 driven tools Cjdpfxeyayc De Afnspu X/Z/Y / C-axis Collet chuck

Condition: excellent (used), operating hours: 8,500 h, functionality: fully functional, * Muratec MT 25 MC. * Extremely well-equipped, estimated equipment value: 30,000–35,000 euros. * 7 controlled axes. * Twin spindles. * Two turrets. * Each turret with 15 positions, all fully driven. * Driven tools, C axis. * Integrated spindle motor, 15 kW. * Spindle start-up torque: 420 Nm. * Driven tool motor: 4 kW. * Spindle nose size: A2-6. * Maximum machining diameter: 370 mm. * Maximum machining length: 920 mm. * Bar capacity: 65 mm. * Box guideways on all axes. * Two hydraulic chucks, 250 mm each, metric system. * Automatic parts catcher for finished workpieces. * Automatic cleaning of secondary spindle with air or coolant. Cjdpfx Asyaxqtofnopu * Conveyor belt for finished parts. * Interface for bar feeder. * 1.5 m Multifeed bar loader included. * Automatic load monitoring and tool consumption monitor. * Automatic part transfer system between spindles with torque control. * Fanuc CNC. * Fanuc motors and servos. * Rapid traverse speeds: 20 and 25 m/min. * Main spindle speed: 3,500 rpm. * Driven tool speed: 3,000 rpm. * Turret indexing time: 0.2 seconds. * Rear hinged belt chip conveyor. * Machine currently in operation. * Weight: 10,800 kg. * Immediate delivery unless sold prior.

Condition: used, Excel XL 420 Lathe x 2m Between Centres, 2 Axis Digital Readout, Fitted With 3 Jaw Chuck, complete with quick change tools (3), 4 jaw chuck and steady rest. Cpjdpfeyabcfsx Afnsu

Condition: excellent (used), Year of construction: 2022, operating hours: 600 h, chuck outer diameter: 160 mm, Delivered new in 2023 . pictures show covers off while being serviced- showing as new condition inside. High spec machine as new. Cpodpfx Aox U D Etsfnou Tool setter swarf conveyor Tailstock Parts catcher Tooling as show. ONLY 600 CUTTING HOURS, NEAR NEW CONDITION Omega Design solutions run over 20 Haas machines and can help with all aspects of getting this machine up and running on you parts.

Condition: refurbished (used), Year of construction: 2002, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: 350523, Equipment: CE marking, Voltage: 380V Net weight: 1400 kg Customs tariff number: 8458.1120 Dimensions: 180x128x172 cm TECHNICAL SPECIFICATIONS CAPACITIES Maximum turning diameter: 270 mm Maximum diameter above cross slide: 115 mm Height of center above cross slide: 60 mm Turning length B32: 265 mm Center height above floor: 1,162 mm SPINDLE A2-4 / Camlock D1-3’’ Spindle for Schaublin collets: Hainbuch / F38 / B32 Spindle speed: 50–5,000 rpm AC motor drive: continuous/intermittent power: 5.5 / 7.5 kW AC motor drive: continuous/intermittent torque: 42 / 58 Nm Spindle bore (without clamping key): 39 mm Maximum bar capacity with collet: 32 mm Maximum bar capacity with automatic chuck: 32 mm PNEUMATIC CLAMPING Adjustable axial clamping force, force at 5 bars: 1,150 daN CROSS SLIDE Cross travel, X-axis: 190 mm Resolution, X-axis (radius): 0.0005 mm AC motor drive: continuous/intermittent torque: 4 / 14 Nm Ball screw, diameter x pitch: Ø 20 x 5 mm Longitudinal travel, Z-axis: 390 mm Resolution, Z-axis: 0.001 mm AC motor drive: continuous/intermittent torque: 4 / 14 Nm Ball screw, diameter x pitch: Ø 32 x 5 mm FEED RATES Working feed rates, X and Z axes, stepless: 0–5 m/min Rapid traverse, X and Z axes: 8 m/min TURRET TOOL SYSTEM Standardized toolholder mounting: VDI 20 Number of fixed/tool stations: 8 / - Maximum tool section: 16x16 mm Integrated coolant and bi-directional indexing: yes COOLANT SYSTEM Tank capacity: 55 L Pump flow rate: 10 L/min Pump pressure: 1.7 bar PNEUMATIC TAILSTOCK Quill taper: MT3 Outside diameter of quill: 45 mm Quill stroke: 70 mm Adjustable tailstock pressure: 25–260 daN Subject to errors or omissions, all technical details are provided without commitment. Completely overhauled: Mechanics, geometry, hydraulics, and electrical parts checked and/or replaced Headstock Disassembly, parts cleaning, replacement of worn and defective parts, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings, adjustment. New paint. Turret Disassembly, cleaning, replacement of worn/defective parts. New paint and face resurfacing. Tailstock Disassembled, inspected, and serviced. New paint. Hydraulic and pneumatic circuits Disassembled, motor inspected, hoses, defective and worn parts replaced. X-Axis Disassembly, replacement of worn parts such as O-rings, seals, rings. New ball screw and new sliding block. Z-Axis Disassembly, replacement of worn parts such as O-rings, seals, rings. New ball screw and new sliding block. Electrical cabinet Complete inspection, various relays replaced. Paintwork Colors: White RAL 9003 and grey RAL 7011 Geometry according to manufacturer's protocol. Cpodpfx Ajx Upugofnou Various accessories checked and cleaned Year: 2002

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 500571, turning length: 800 mm, spindle bore: 100 mm, travel distance X-axis: 200 mm, travel distance Z-axis: 500 mm, total height: 3,300 mm, total length: 6,000 mm, total width: 3,000 mm, overall weight: 8,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK, INDEX G 300 CNC Lathe - Operating voltage: 400 V - Rated current: 80 A - Connection: 47 kW - Frequency: 50 Hz Cpsdpfjx Tz Snex Afnju - Including a double turret each with a 12-station tool turret, as well as a tailstock and main spindle - Includes chip conveyor and two manuals, as well as a BÜCHEL manufacturer filter extraction system Note: The machine can be transported on a standard truck. Note: The item must be collected between 18 and 26 February 2026 on a binding, to-be-agreed date. FCA D-78087 Mönchweiler – loaded onto truck

Condition: excellent (used), Year of construction: 2007, Mori Seiki NL2000Y/500 CNC Lathe (05/2007) Manufacturer: Mori Seiki Cjdpfx Afjx Tp N Ienepu Model: NL2000Y/500 Year of manufacture: 05/2007 Condition: used, very good, in operation Control: MSX-850II Optional with tooling and accessories.

Condition: ready for operation (used), Year of construction: 2008, Takamaz XY-2000 Plus CNC lathe (2008) Manufacturer: Takamaz Model: XY-2000 Plus CNC lathe Year of manufacture: 2008 Condition: Used, powered up and in production. 2x spindles (2x Hainbuch collet chucks) 2x tool turrets, each equipped Parts catcher Bar feeder Video available. Codpfx Aox Ti Hgjfnspu Further information upon request.

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: R7 A-Q-2701, Used CNC lathe Manufacturer: EMCO Model: Hyperturn 665 Year of manufacture: 2002 Control: 840 D Cpodpjx Tbcysfx Afnju With chip conveyor

Condition: excellent (used), Year of construction: 2004, A fully operational CNC lathe from Böhringer, model NG180, is available for sale. Csdpfx Ajx Swigofnepu

Condition: good (used), Year of construction: 2014, spindle speed (min.): 2,500 rpm, Year of manufacture: 2014 Chuck diameter: 10" Number of axes: 3 Swing over bed: 250 mm Spindle speed (rpm): 2500 Cpodex N A Ebopfx Afnou Machinable materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Derlin, Peek

Condition: good (used), Year of construction: 2001, spindle speed (min.): 2,500 rpm, Model Year: 2001 Chuck Diameter: 10" Number of Axes: 2 Length: 650 mm Swing Diameter: 650 mm Spindle Speed (RPM): 2500 Cpedpfx Afjx N A Dwjnsu Machinable Materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK

Condition: good (used), Year of construction: 2010, spindle speed (min.): 1,500 rpm, travel distance Z-axis: 650 mm, Model Year: 2010 Chuck Diameter: 17" Cedpsx N A A Tefx Afnjpu Number of Axes: 2 Length: 650mm Spindle Bore Diameter: 650mm Spindle Speed (RPM): 1500 Machinable Materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Derlin, Peek

Condition: good (used), Year of construction: 2004, spindle speed (min.): 3,500 rpm, travel distance Z-axis: 1,000 mm, Model Year: 2004 Chuck Diameter: 12" Number of Axes: 2 Codpfex Nvpaox Afnopu Length: 1000 mm Swing Over Bed: 350 mm Spindle Speed (RPM): 3500 Processable Materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, Peek

Condition: good (used), Year of construction: 2008, spindle speed (min.): 4,000 rpm, travel distance Z-axis: 500 mm, throat depth: 300 mm, Year of manufacture: 2008 Chuck diameter: 8" Number of axes: 3 Length: 500 mm Neck diameter: 300 mm Spindle speed (rpm): 4000 Codpjx Nvm Ssfx Afnopu Machinable material types: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Derlin, Peek