Eurl Ct Services

Condition: used, Year of construction: 1996, operating hours: 12,437 h, load capacity: 16,000 kg, lifting height: 4,050 mm, fuel type: diesel, mast type: simplex, construction height: 3,620 mm, fork carriage width: 2,500 mm, fork length: 2,380 mm, empty load weight: 22,100 kg, total length: 5,400 mm, drive type: Diesel, construction width: 2,550 mm, Diesel forklift Load center: 1200 Fork width: 250 mm Fork thickness: 100 mm Mast type: Standard Condition: Ready for use and fully functional Front tire type: Superelastic Front tire size: 12.00-20 Rear tire type: Pneumatic Rear tire size: 12.00-20 Description: In addition to this Linde model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease-purchase and financing options at favorable terms are always possible for us. We would also be happy to buy your used forklift, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed information about this 161200. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and special construction for forklifts from 8 tons upwards. We will also gladly display your vehicle for consignment sale at our facility. Side shifter, fork positioner Fork positioner adjustment range: 695 / 2385 mm Fpsdszt Dqqepfx Aa Eek Heater, full cabin

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 5,915 h, load capacity: 6,000 kg, lifting height: 4,020 mm, fuel type: diesel, mast type: simplex, construction height: 2,880 mm, fork carriage width: 1,460 mm, fork length: 1,400 mm, empty load weight: 9,690 kg, total length: 4,950 mm, drive type: Diesel, construction width: 2,230 mm, Side loader Load center: 700 Fork width: 180 mm Fork thickness: 60 mm Fpsdozt Dqkspfx Aa Eok Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Pneumatic Front tire size: 3.00-15 Rear tire type: Pneumatic Rear tire size: 3.00-15 Description: In addition to this Jumbo model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease purchase and financing at favorable terms are always possible for us. We are also happy to buy your used vehicles outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this JDQ60/14/40. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom construction for forklifts from 8 tons upwards. We are also happy to offer your vehicle for consignment sale in our showroom. Fork positioner, Heater, full cabin, Platform height: 1050 mm

Condition: used, mileage: 470,000 km, power: 460 kW (625.43 HP), first registration: 07/2021, empty load weight: 8,330 kg, maximum load weight: 19,000 kg, tire condition: 25 %, axle configuration: 1 axle, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, load capacity: 10,670 kg, Equipment: Bluetooth, air conditioning, cruise control, fridge, onboard computer, retarder, • Retarder • 2 x 598L fuel tank • Fog lights • Bluetooth • Air conditioning • GPS • 2 berths • Refrigerator • Heated and ventilated seat Fsdpfx Aaozt Dp Tj Eopk • Cruise control and speed limiter • Spoilers • Webasto heater • Sunroof

Condition: used, mileage: 82,000 km, power: 410 kW (557.44 HP), first registration: 07/2020, empty load weight: 24,100 kg, maximum load weight: 32,000 kg, tire condition: 50 %, axle configuration: > 3 axles, fuel: diesel, gearing type: automatic, emission class: euro6, suspension: air, load capacity: 7,900 kg, crane manufacturer: HIAB, Equipment: Bluetooth, air conditioning, central locking, crane, cruise control, onboard computer, rear view camera, retarder, • DELAYED DELIVERY • HIAB X-HIPRO 638 E-7 crane • 150X-6 jib • 490 KG at 30.20m • Pallet forks • 4 outriggers • Remote control Fpjdszt Dp Hopfx Aa Eek • 7.42m platform • 750mm aluminum sideboards • Storage compartments • LED rear lights • Cone holder • Fog lights • Air conditioning • Differential lock • Cruise control and speed limiter

Condition: used, mileage: 14,395 km, power: 103 kW (140.04 HP), first registration: 01/2025, fuel type: diesel, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 3,640 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2024, Equipment: air conditioning, trailer coupling, Color: White, permissible total weight: 3500 kg, seats: synthetic leather, 2 x airbags, trailer hitch (ball type), electronic stability program (ESP), Climatic air conditioning, voice control system, passenger seat bench for 2 people, LED headlights, digital radio reception (DAB+), parking assistance (front and rear), rear-view camera, rain sensor, fog lights, exterior mirrors: electrically adjustable and foldable, heated, tire pressure monitoring system, immobilizer, central locking with remote control, heat-insulating glass, comfort package, light and visibility package, storage package, all-season tires, partition, cargo area floor (wood), spare wheel, sliding door (right), hill-start assist, LED daytime running lights, Light Assist, cornering lights, floor covering (rubber), smoker's package, crosswind assist, light sensor, lashing eyes, traffic sign recognition. This is a non-binding offer. Subject to prior sale, errors and changes. Fsdpfx Aaezt Dm So Eepk

Condition: excellent (used), functionality: fully functional, DESTACO pneumatic clamp Fjdpfx Aajzt Dm Eo Ejpk Recommended for welding jigs and series production. DESTACO 82M-3E series with integrated 8EA-146-4 position sensor module (open/power/close feedback, 10–30VDC, 150mA). DESTACO 82M-3E030063L8 – stronger, 63mm cylinder. Clamping angle: 5–135°. Max. pressure: 6 bar. Sensor: 8EA-146-4 PNP, max. 30VDC, M12 connector. Port: G 1/4 Quantity: 28 pcs. DESTACO 82M-3E030050L8 – 50mm cylinder. Clamping angle: 5–135°. Max. pressure: 6 bar. Sensor: 8EA-146-4 PNP, max. 30VDC, M12 connector. Port: G ¼ Quantity: 8 pcs.

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 232657 SZ. 281, overall weight: 2,400 kg, total width: 1,350 mm, total length: 1,200 mm, total height: 2,400 mm, type of input current: three-phase, input voltage: 400 V, year of last overhaul: 2023, Refurbished eccentric press from a traditional blacksmith's workshop. An eccentric press manufactured by Ganz and Társa in 1897, now in fully refurbished condition, is for sale, complete with a set of rare cutting tools. During the refurbishment, the following parts were replaced: - Main shaft grey cast iron bearings Fpodszt Dmfopfx Aa Ejk - Drive shaft - Drive shaft bronze bearings - 3 locking pins - All protective covers - Complete repainting (with the cast surface pre-cleaned by shot blasting) The cutting tools can still be used to create various leaf and flower patterns, which are then shaped into their final form by hand. This process allows for the traditional production of completely unique shapes that are no longer available commercially. The machine has a unique historical background, and I can share more information and archival images with the buyer.

Condition: good (used), Year of construction: 2009, functionality: fully functional, turning diameter over cross slide: 225 mm, spindle bore: 62 mm, turning diameter: 400 mm, turning length: 1,000 mm, total length: 2,100 mm, total width: 1,080 mm, total height: 1,520 mm, overall weight: 1,800 kg, This machine, similar to the WEILER Commodor, is still in working order and can be inspected at the factory in good condition. Attached is a PDF with technical data. Fpodpezt Dl Usfx Aa Eek

Condition: ready for operation (used), Year of construction: 2019, Multi-spindle drilling machine manufactured in 2019. This COMEC FMOV 1500 6UF + CA2 features a working width of 1500 mm and a working depth of 300 mm, allowing for efficient processing of long workpieces up to 1500 mm in one cycle. It includes an automatic parts loader and pneumatic clamping for enhanced productivity. If you are looking to get high-quality drilling capabilities, consider the COMEC FMOV 1500 6UF + CA2 machine we have for sale. Contact us for further details. • Configuration: 6 multiple heads arranged on 3 working lines • Workpiece capacity: Drilling of long workpieces up to 1500 mm in one cycle • Working width (X): 1500 mm • Working depth (Y): 300 mm • Max. clamping height: 70 mm • Top surface processing: Yes • Horizontal processing: Yes • Interchangeable aggregates: Yes • Positioning: Manual • Drilling feed: Pneumatic • Clamping: Pneumatic • Control: PLC with selectable work cycles • Modularity/customization: High • Cleaning and waste system: Integrated, efficient • Certification: CE Fodpfxozt Dlus Aa Ejpk Additional equipment • Automatic parts loader (synchronized with the machine cycle)

Condition: ready for operation (used), Year of construction: 2020, saw blade speed: 4,000 rpm, Panel saw manufactured in 2020. This FIMAL concept 350 features a squaring length of 3200 mm and a blade diameter range of 300 to 350 mm. It operates at a blade rotation speed of 4000 rpm and has a main motor power of 7.5 hp. If you are looking to get high-quality cutting capabilities, consider the FIMAL concept 350 machine we have for sale. Contact us for further details. • Model: Concept 350 – 3200 • Squaring length: 3200 mm • Blade diameter: 300–350 mm • Blade inner hole: 30 mm • Blade projection (90°): 100 mm (75 mm) Fedpfjzt Dlhox Aa Eopk • Blade projection (45°): 67 mm (45 mm) • Blade group speed (inverter): 40 m/min • Main motor power: 7.5 hp (5.5 kW) • Extraction outlet: 120 / 100 mm • Extraction air volume: 1800 m³/h • Extraction air speed: 25 m/s • Operating pressure: 7 bar • Air consumption: 85 l/h

Condition: ready for operation (used), Year of construction: 2016, working width: 200 mm, total width: 1,635 mm, total height: 1,730 mm, overall weight: 3,750 kg, spindle speed (max.): 6,000 rpm, controller manufacturer: SIEMENS, controller model: Smart Line, spindle motor power: 5,500 W, product length (max.): 3,850 mm, This 6-axis REIGNMAC 520 Moulding Master was manufactured in 2016. It features a working width of 20–200 mm and a working thickness of 8–120 mm, with a feed speed of 6–24 m/min. The machine is equipped with six spindles, with a spindle speed of 6000 rpm and a maximum tool diameter of Ø145 mm. If you are looking to get high-quality woodworking capabilities, consider the REIGNMAC 520 Moulding Master machine we have for sale. Contact us for further details. • Working width: 20–200 mm • Working thickness: 8–120 mm • Feed speed: 6–24 m/min • Working table length: 1700 mm • Pressure beam vertical adjustment: 10 mm • Infeed table adjustment: 10 mm • Spindle configuration: • Number of spindles: 6 • Spindle diameter: 40 mm • Maximum tool diameter: • First bottom spindle: 108–145 mm • Right/left spindles: 108 mm • Top spindle: 140 mm • Bottom finishing spindle: 96 mm • Motor power: • Feed motor: 5.5 kW (7.5 HP) • Right spindle motor: 5.5 kW (7.5 HP) Fedpszt Dk Refx Aa Eepk • Left spindle motor: 5.5 kW (7.5 HP) • Top spindle motor: 7.5 kW (10 HP) • Bottom spindle motor: 5.5 kW (7.5 HP) • Feed beam lifting motor: 1.1 kW • Total installed power: 28.6 kW Additional equipment • Safety cabin included

Condition: ready for operation (used), Year of construction: 2013, Edgebander manufactured in 2013. This HOLZHER Streamer 1054 features a premilling unit with diamond tools, capable of handling workpiece thicknesses up to 60 mm. It includes a Glu Jet S cartridge system for glue application and a pneumatic end trimming unit. The machine also offers a trimming unit for flush or radius edges, with a radius capability of up to 3 mm and edging thickness up to 6 mm. For more information about this machine, please reach out to us. • Premilling unit: diamond tools • Workpiece thickness: up to 60 mm • Glue application: Glu Jet S cartridge system (EVA / PUR) Fpsdszt Dkwepfx Aa Eok • End trimming unit: pneumatic • Pressure unit: 3 rollers (first roller motor-driven) • Trimming unit: flush / radius • Radius: up to 3 mm • Edging thickness: up to 6 mm • Scraper units: radius scraper (R); flat scraper (glue removal) • Automatic edging feed: coil or strips

Condition: ready for operation (used), Year of construction: 2016, overall weight: 1,870 kg, Edgebander manufactured in 2016. This BIESSE Akron 1440 A features a pre-milling unit, multifunction milling units, flat trimming, and a corner rounding unit. It also includes automatic glue application, motorized adjustment of units, and a touchscreen control for ease of use. If you are looking to get high-quality edgebanding capabilities, consider the BIESSE Akron 1440 A machine we have for sale. Contact us for further details. Technical Data: • Model: BIESSE Akron 1440 A • Year: 2016 • Working hours: approx. 4,200 h • Power: 13 kW • Power supply: 380 V, 50 Hz, 3 / N / PE • Full-load current: 24 A • Air pressure requirement: 7 bar • Weight: approx. 1,870 kgWorking Capacity: • Feed speed: 8 / 12 / 15 / 18 m/min • Workpiece thickness: 10–60 mm • Edge thickness: coil 0.4–3 mm, strip up to 12 mm • Edge height: 14–64 mm • Minimum panel length: 140 mm • Minimum panel width: 50 mmInstalled Units / Equipment: • Automatic glue application unit • Pre-milling unit • Multifunction milling units R1 + R2 • Flat trimming unit Fpodpszt Dkqsfx Aa Eok • Corner rounding unit (Rondomat) • Radius profile scrapers • Flat scrapers • Polishing brushes • Cleaning liquid application unit • Motorized adjustment of units • Touchscreen control • IntelliSet system • FAST setting technology • ECO modeAdditional Information:The transport chain / output conveyor for finished panels is not included in the offer includes the machine ilability:The machine is currently in daily production and can be inspected under power. Inspection and testing are possible by prior ilable for collection from the beginning of September 2026.

Year of construction: 2007, condition: ready for operation (used), This HOMAG WEEKE industrial production line was manufactured in 2007. It features a comprehensive setup for high-volume panel processing and edge-banding, including automatic loading systems, a central roller conveyor, multiple edge-banding modules, and a portal manipulator for stacking. Ideal for streamlined wood production, ensuring efficient handling and precision. Consider the opportunity to buy this HOMAG WEEKE industrial production line. Contact us for more information about this machine. Fpedpfx Aszt Dkdoa Eok Application Types Complete Production

Condition: ready for operation (used), Year of construction: 2019, Edgebander manufactured in 2019. This SCM Olimpic K 560 features a feed speed of up to 18 m/min and is equipped with a 7" color touchscreen control for easy operation. It includes a 2-motor Round X rounding group for corner rounding and trimming, along with various optional groups for enhanced functionality. If you are looking to get high-quality edge banding capabilities, consider the SCM Olimpic K 560 machine we have for sale. Contact us for further details. Key features • Feed speed up to 18 m/min with 600 mm panel spacing, even with corner rounding • Touch 7 color touchscreen control with graphics, program management, diagnostics, and digital glue temperature control Fpjdpfx Aajzt Di Te Eek • 2-motor Round X corner rounding group for corner rounding and trimmingTechnical specifications • Feed speed: 12–18 m/min • Workpiece thickness: 8–60 mm • Edge thickness (roll): 0.4–3 mm • Edge thickness (strip): 0.4–6 mm • Max edge cross-section (roll): 135 mm² • Max roll diameter: 800 mm • Edge overhang: 2 mm top / 2 mm bottom • Workpiece spacing: 600 mm • Min workpiece length: 140 mm • Min workpiece width: 95 mm (60 mm with special setting) • Minimum length (roll material): 180 mm • Minimum length (strip material): 220 mm • Opening of workpiece pressure bar: 560 mm • Working height: 900 mmControl system (Touch 7) • 7" color touchscreen (16:9) • Graphical display and simulation of all units • Control of all units and automatic start functions • 60 freely editable programs • Full PLC control with encoder monitoring • Digital glue pot temperature control • Diagnostics with operator assistance • Statistics: piece counts, edge meters, chain runtime • Pass selection: first or second processing passProcessing units • Joining milling: two diamond jointing cutters, 1.8 kW each, 12,000 rpm • Glue unit VC-S4.1: 3 kW heating, 1.5 kg tank, Fastlock quick-change, motorized main + three pressure rollers • Trimming unit K/SEL: two HF motors 0.35 kW each, 12,000 rpm, swivel 0–15° • Flush milling unit R-K: two HF motors 0.55 kW each, 12,000 rpm, tool radius R2 • Round X corner rounding: two HF motors 0.35 kW each, 12,000 rpm, backlash-free precision guides • Scraper unit RAS-K: tool radius R2 • Polishing unit SP-V: two motors 0.18 kW each, 3,000 rpm Additional equipment • Autoset T-ER2 automatic changeover: • Switching between first and second passes • Automatic edge thickness change (e.g., 0.4 mm to 2 mm) • Release agent/anti-adhesive spray system AAR • Glue scraper unit RC-V • H=64 mm diamond tools for rectifying/pre-milling group

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 3,110 mm, travel distance Y-axis: 1,620 mm, travel distance Z-axis: 180 mm, number of axes: 5, spindle speed (max.): 24,000 rpm, This 5-axis SCM Morbidelli M100 CNC processing center was manufactured in 2019. It features a useful working field of 3110 mm in the X-axis and 1620 mm in the Y-axis, designed for high productivity in furniture and panel processing. The machine includes advanced capabilities such as 5-axis routing, drilling, and integrated CAD-CAM software. If you are looking to get high-quality panel processing capabilities, consider the SCM Morbidelli M100 machine we have for sale. Contact us for further details. • Year/usage: Purchased 2019; approx. 2,000 operating hours • Axes/capabilities: 3/4/5-axis machining; drilling (vertical and horizontal on 4 sides), routing/milling, grooving, edge machining; PRO-SPACE safety system • Working area: X 3110 mm; Y 1620 mm; Z passage 180 mm; Y passage 1900 mm; pendulum length 1400 mm Fedpfxezt Di Hj Aa Eepk • Worktable: TV FLEX 1600 worktable, 6 mobile bars/supports, 6 crossbars; standard bar positions 6–12; mobile bar length 1600 mm; 12 fixed vacuum cups (145 x 145 x 75 mm); prep for 6 pneumatic clamps; 4 pneumatic panel loading/support devices; 8 rear limiters; 8 intermediate limiters; left lateral reference + laser for shaped parts • Structure/motion: Welded steel frame; linear guides with recirculating bearings; X by mobile bars, Y by gantry with rack & pinion both sides, Z by ball screw; CNC-managed positioning • Speeds: Max XY vector speed (PRO-SPACE) 56 m/min; drilling spindles up to 8,000 rpm; electrospindle up to 24,000 rpm • Drilling unit: F23L group with 13 vertical spindles (7R+6L), 10 horizontal spindles (4+3 in X, 2 in Y); integrated X-direction saw Ø125 mm, 2.2 kW; 75 mm pneumatic on/off stroke; inverter for programmable speed • Main spindle: Hiteco JQX 5-axis electrospindle, HSK F63, liquid cooled, ceramic bearings; power class ~10 kW (S6 up to ~15 kW), 24,000 rpm • Tool changers: Rear TRB 14 (14 positions; 350 mm stroke; 115 mm pitch; tools up to Ø240 mm; total 70 kg); Front FAST 14 (14 positions; tools up to Ø130 mm in selected pockets; max 8 kg/tool; total 24 kg) • Control/software: Windows 7; 21.5" FHD display; keyboard/mouse + machine panel; Maestro CNC CAD/CAM (parametric/graphic programming, DXF import, ISO graphics, simulation); TECPAD 7" mobile touch pendant; remote control along machine • Vacuum: Standard vacuum pump (machine standard); centralized automatic lubrication • Utilities: Installed power 23 + 28.5 kVA; compressed air 450 NL/min; dust extraction requirement 4500 m³/h, 25 m/s, outlet Ø250 mm; centralized/optimized extraction with adjustable conveyor and grouped outlets • Safety/standards: PRO-SPACE concept (no front photocells/side fences per offer), CE conformity, emergency stops and guarded areas as per EU norms Additional equipment • Additional vacuum pump: 1 x 90 m³/h • Additional hardware key for Xilog/Maestro (USB)

Condition: ready for operation (used), Year of construction: 2017, overall weight: 2,880 kg, This SCM SIGMA PRIMA 67 panel saw was manufactured in 2017. Ideal for precise wood panel cutting, it offers reliable performance for your woodworking projects. Consider the opportunity to buy this SCM SIGMA PRIMA 67 panel saw. Contact us for more information. Fjdpfx Aaszt Diys Espk Machine Benefits Technical Machine Benefits • The panel saw is mainly intended for cutting boards sized 2800 x 2070 mm and these are the formats that were typically processed. The working range of the panel saw is 3800 mm on one of the axes. Extra Information Media Electrical specifications: Voltage: 400 V Phases: 3 Nominal current: 22 A Frequency: 50 Hz

Condition: ready for operation (used), Year of construction: 2018, cutting length (max.): 4,300 mm, Panel saw manufactured in 2018. This HOMAG PROFI HPP 300 / 43 / 43 features a cutting length of 4,300 mm and a cutting width of approximately 4,250 mm. It has a maximum saw carriage feed speed of 130 m/min and a maximum saw blade diameter of 350 mm. If you are looking to get high-quality panel cutting capabilities, consider the HOMAG PROFI HPP 300 / 43 / 43 machine we have for sale. Contact us for further details. • Cutting width (programmable pusher): approx. 4,250 mm • Max. saw carriage feed speed: 130 m/min (optional up to 150 m/min) • Saw blade projection: 80 mm (optional 95 mm) • Max. saw blade diameter: 350 mm • Main saw blade diameter: 350–380 mm (depending on configuration) • Main saw motor: 11 kW • Scoring saw motor: adjustable, 1.5–2.2 kW • Clamps: 7 units (2-finger design) • Control system: CADMATIC 4.1 / 4.5 or powerTouch (depending on configuration) • Total connected load: approx. 18.4 kW • Compressed air: 6 bar • CE marking: Yes • Stack height: up to approx. 80 mm (standard) Fodpfozt Ditjx Aa Eepk • Extraction capacity requirement: approx. 3,350–5,230 m³/h • Processing: Single panels and stack cuts

Condition: ready for operation (used), Year of construction: 2008, cutting length (max.): 4,300 mm, Panel saw manufactured in 2008. This HOLZMA HPP 350/43/38 features a saw blade projection of 80 mm and a cutting length of 4300 mm, providing efficient cutting capabilities. It includes a powerful main saw motor of 13.5 kW and a scoring saw motor of 2.2 kW. If you are looking to get high-quality panel cutting capabilities, consider the HOLZMA HPP 350/43/38 machine we have for sale. Contact us for further details. • Power/control: CADmatic 4 • Saw blade projection: 80 mm • Saw carriage speed (forward/reverse): 1–150 m/min / 150 m/min • Program fence speed (forward/reverse): 90 m/min / 90 m/min • Main saw motor: 13.5 kW • Scoring saw motor: 2.2 kW • Working height: 920 mm • Main saw blade: 350 x 4.4 x 60 mm • Scoring saw blade: 180 x 4.4–5.4 x 45 mm • Cutting width: 3700 mm Fsdpfozt Digox Aa Ejpk • Service/condition: Regularly serviced with annual inspection by a Homag technician. In 2021, a new control computer (Windows 10) was installed with updated machine control software. Additional equipment • Label printer Pica 108 • Optimization program CAD-Plan 4 • CadLink interface/software • Kit for gypsum panels

Condition: ready for operation (used), Year of construction: 2022, Panel saw manufactured in 2022. This FELDER K 945S features a maximum cutting height of 155 mm and a maximum cutting width of 1250 mm. It includes a sliding table with a cutting length of 2800 mm and a powerful 5.5 kW main saw motor. If you are looking to get high-quality cutting capabilities, consider the FELDER K 945S panel saw we have for sale. Contact us for further details. • FELDER K 945 S sliding table saw • Manual blade angle adjustment with angle display and handwheel • Tilting saw unit 90°–45° • Blade diameter range: 250–450 mm • Maximum cutting height: 155 mm • Electric height adjustment • Maximum cutting width: 1250 mm • Main saw motor 5.5 kW (7.5 HP), 3x400 V, soft start, CE brake Fjdpfx Aaszt Diao Ejpk • Three spindle speeds: 3500 / 4500 / 5500 rpm • PCS (Preventive Contact System) safety system with optical status indicator; resettable after activation • Antistatic belt for PCS system • Sliding table, cutting length 2800 mm, anodized aluminum • 10-year warranty on the X-Roll sliding table system • Parallel fence with round guide bar, D = 50 mm • Rip fence 2600 mm with clamping system for extension table 1300/1500 • Extension table for cutting lengths 2500–3200 mm • Support surface: 1150 x 640 mm • Crosscut fence 3200 mm with 2 flip stops • Overhead guard for 1250 mm cutting width with 100 mm dust extraction connection • Machine stand for K 945 S, cast iron saw table; operating tools included • User manual in Czech • Additional warranty: 3 years on machine parts (valid when commissioned by an authorized FELDER technician) • Transport packaging for sliding table • Standard pallet: 2100 x 1500 x 1500 mm Additional equipment • Dust extraction system: • Mobile dust extractor AF 22 • 4.0 HP (3.0 kW), 3x400 V, 50/60 Hz • Standard dust filter • Connection ports: 120 mm and 80 mm • Dust extraction hoses: • 4 x industrial extraction hose H/SE Ø120 mm • 4 x industrial extraction hose H/SE Ø100 mm • Heavy-duty, abrasion-resistant, flame-retardant; smooth internal surface • Spare parts included: • Adjustable support rail (106ND) • Cross roller rail plate (Fen-Grau) • Clamp rail lower section • Compression spring • Clamp rail upper section • Additional machine spare part (222MB)

Condition: ready for operation (used), Year of construction: 2022, This BIESSE Selco WNT 630 panel saw was manufactured in 2022. It features a maximum cutting length of 3800 mm, saw blade projection of 108 mm, and a lift table capacity of 5 tons. Ideal for handling large panels up to 3660 x 2200 mm. If you are looking to get high-quality cutting capabilities, consider the BIESSE Selco WNT 630 machine we have for sale. Contact us for more information. • Working size: 3800 x 2200 mm • Max cutting length: 3800 mm • Saw blade projection: 108 mm • Max gripper opening: 100 mm • Min panel size: 1830 x 915 mm Fjdpfx Aozt Dh Nsa Ejpk • Max panel size: 3660 x 2200 mm • Max packet height: 630 mm • Condition: Almost new, used only a few months Additional equipment • Back lift table: • Minimum panel thickness on lift table: 10 mm • Maximum lift: 985 mm • Lift table capacity: 5 t

Condition: ready for operation (used), Year of construction: 2007, cutting length (max.): 3,000 mm, Panel saw manufactured in 2007. This Altendorf F 45 features a cutting length of 3000 mm, a main saw with a power of 5.5 KW, and a maximum main saw blade diameter of 500 mm. If you are looking to get high-quality cutting capabilities, consider the Altendorf F 45 panel saw we have for sale. Contact us for further details. • Main saw motor power: 5.5 kW Fedpfjzt Dh Asx Aa Eepk • Main saw blade diameter: max. 500 mm • Scoring saw motor power: 0.75 kW • cutting length 3000 mm

Condition: ready for operation (used), Year of construction: 2021, This SCM DMC SYSTEM belt sander was manufactured in 2021. It features a working width of 1,350 mm and belt feed speeds ranging from 2 to 16 m/min. Equipped with PRO SAND electronic control and a PLC terminal with a 10.4" LCD color display, it offers advanced user interface capabilities. The machine includes multiple working units for diverse sanding tasks and is powered by inverters for precise speed control. Contact us for more information about this machine. Additional equipment • Vacuum Motor: Powered by inverter up to 7.5 kW integrated into machine frame / Conveyor: Rubber-coated belt conveyor 50 Shore / Feed Belt Motor: 4 kW driven by inverter / Console: Integrated with PC eye-M and Maestro Pro Sand electronic control, Tele Service system, 21.5" LED LCD color display • Programs: 1999 Working Programs / Control System: Interactive troubleshooting, self-diagnosis, Full HD display with multi-touchscreen, Maestro Pro Sand software • Operating Temperature: +5 to 35°C/ Additional Features: Virtual keyboard, production report, display of electric and pneumatic diagrams, user manual. Machine Benefits Technical Machine Benefits • Working width: 1350 mm / belt feed speed: 2 to 16 m/min / control: pro sand electronic control / display: plc terminal with 10. 4" lcd color display • Sanding belt dimensions: 150 x 5000 mm / chevron belt dimensions: 140 x 4710 mm; 1370 x 2186 mm Fjdjzt Dhvepfx Aa Eopk • Aggregate 1: tie 5000 working unit for extra table internal cross pad / automatic brake, linear blower, sanding belt cleaning system / aggregate 2: do19 orbiting unit for 19 rotating disc brushes / main motor: 1. 1 kw / rotating disc diameter: 125 mm / aggregate 3 & 4: bf300 working unit for brush roller / brush roller diameter: 300 mm / motor: 4 kw / aggregate 5: sc 2620 operating unit for super-finishing pad / chevron belt dimensions: 1370 x 2186 mm / sanding belt dimensions: 1370 x 2620 mm

Condition: ready for operation (used), Year of construction: 2019, total width: 2,100 mm, total height: 3,000 mm, working width: 1,300 mm, overall weight: 14,500 kg, product length (max.): 3,100 mm, Belt sander manufactured in 2019. This Lingi Jianzhong BSG2613C features a maximum working width of 1300 mm and a processing thickness range of 5-80 mm. It includes a grinding belt dimension of 1350x2800 mm and operates at a speed of 31 m/s. If you are looking to get high-quality sanding capabilities, consider the Lingi Jianzhong BSG2613C machine we have for sale. Contact us for further details. • Condition: Not rebuilt, without warranty • Technical specifications: • Processing thickness: 5–80 mm • Minimum processing length: ≥ 780 mm • Machining accuracy: ±0.08 mm • Grinding belt dimensions: 1350 × 2800 mm • Grinding belt speed: 31 m/s Fpsdpfx Aszt Dhpsa Esk • Roller diameter: 2 × Ø320 mm • Total power: 165 kW • Main motor power: 2 × 75 kW • Feed motor: 11 kW • Lift motor: 2 × 0.75 kW • Brush motor: 2 × 0.75 kW • Feed speed: 10–30 m/min • Operating air pressure: 0.5–0.8 MPa • Dust extraction requirement: 24,000 m³/h • Voltage: 380 V, 50 Hz

Condition: ready for operation (used), Year of construction: 2007, Laminating press manufactured in 2007. This OTT SOLID 16-32 features plate dimensions of 3200 x 1600 mm and a total pressure of 160 t, with a daylight opening of 400 mm. If you are looking to get high-quality laminating capabilities, consider the OTT SOLID 16-32 machine we have for sale. Contact us for further details. Fodpfx Aezt Dhija Eopk • Plates dimensions: 3200 x 1600 mm • Total pressure: 160 t • Daylight opening: 400 mm