Amr Technology Budowa I Serwis Maszyn

Year of construction: 2017, condition: used, Empty bottle inspector for monitoring empty glass bottles. The machine uses cameras, high frequency, and infrared to inspect the following criteria: - Contour, height, color - Side wall - Residual lye detection - Mouth - Thread - Residual liquid detection - Bottom inspection - Glass shards and film detection - Sealing surface inspection Bottles that do not meet the specifications are ejected via pushers. Additional title: Straight-running machine in modular design Current: 6 A Voltage: 400 / 230 V Frequency: 50 Hz Water: 3-5 bar Compressed air: 6-10 bar, 1/2" connection Length: 2980 mm Formats: 1,0 l; 0,5 l; 0,2 l Running direction: right -> left Operation / Control: Simatic S7-300 Position: standing on feet Base construction: straight-running Ffjdpsyr Ifkjfx Ag Djw Features: camera, side wall modules, test bottle detection, high-frequency and infrared inspection, side opening inspection, thread inspection, sealing surface inspection, light barrier, pushers at inlet and outlet, diversion control, operating panel

Year of construction: 2007, condition: used, Glass bottle filling line for 6.000 bph, for 0,5 lt bottles, still installed, free, with following machines: - Bottle unpacking machine, make Matec, type: VARIPACK 400, built 2007 - Bottle cleaning machine, make GM Gera, type: GEK2.1 RV1-164/85-15m built 2007 - Bottle filling and sealing machine, type: VARIFILL 24/KK8, built 2007 - Crown cork closure conveyor system, built 2007 - Level and label control system, type: basic 2, built 2007 - Bottle packing machine, type: VARIPACK 400, built 2007 - Box washing machine, make GM Gera, type: KWM S111 1500/508, built 2007 - Bottle transport and box transport built 2007 - Sedimentation tank, built 2007 Fsdpfx Aeyrpxrjg Djfw - Teaching bottle inspection, make Nate, type: EXAN 08, built 2012 - Labelling machine KUBE K30, built 2016

Year of construction: 2009, condition: ready for operation (used), An empty bottle inspection machine Heuft including a pre-sorting unit Heuft Spectrum SX TB 72 and Gateway II is available. Inspector: rated throughput: 72000bottles/h, bottle types: Ale/NRW/Euro/Krombacher swing top/swing top, bottle colors: green/brown/clear, closure types: crown cap/screw cap/embossing, bottle volume: 330ml/500ml, pre-sorting: bottle type/bottle height, inspection types: sidewall/finish/thread/base/residual liquid/labels/test bottles. Including defective bottle reject systems and infeed and outfeed conveyor. Documentation available. An on-site inspection is possible. Fedsyrg Idepfx Ag Defw

Year of construction: 1986, condition: ready for operation (used), A complete bottle filling and packaging line up to palletizing is available. 1) Bottle erector Gronemeyer VFA POS-1, year of manufacture: 1986. 2) Filling machine Robert Bosch FKR G24, year of manufacture: 1986. 3) Capper/closing machine Robert Bosch VSR A 08, year of manufacture: 1986. 4) Sorting bowl Robert Bosch EMSE SS.1 790 KS, year of manufacture: 1986. 5) Labeling machine Robert Bosch EMS A 08, year of manufacture: 1986. 6) Fill level measuring device Wurm. 7) Sleever Accraply Packaging Company RF 250, year of manufacture: 2021. 8) Shrink tunnel Inter-sleeve Systems 9C. 9) Bottle erector Flex Link XCML44. 10) Bottle gripper Gerhard Schubert SNC-SK, year of manufacture: 1992. 11) Tray former Gerhard Schubert SKA, year of manufacture: 1992. 12) Strapping machine Gerd Mosca SRF, year of manufacture: 1998. 13) Cover former Gerhard Schubert SNC-F2, year of manufacture: 1992. 14) Palletizer Oli Spezialanlagen oli-pal D/SP, year of manufacture: 2012. This is a complete filling, labeling, cartoning and palletizing line from various manufacturers and years of manufacture. Documentation available. An on-site inspection is possible. Fodpfxjynaucj Ag Dsfw

Year of construction: 2021, condition: ready for operation (used), Some plant components from a bottle filling plant are available. 1) Indexed rotary bottle capper Kematec MBK 1 AR. 2) Belt station Cornelis Costamat-PP-1. 3) End-of-line packaging machines Normpack. An on-site inspection is possible. The offer is not a complete line, but plant components that have been decommissioned. Ffjdpfx Asympdqog Dew

Condition: used, Haendle box feeder BKS 1506 with steel plate conveyor, large extensions (25 cbm) and two separately driven shredding shafts for difficult material. Fjdpfx Agoylx Ics Djfw Suitable for clay/loam, cohesive material, substrates/humus, waste, etc. 2 units available, new control panel/PLC on request Price on request

Year of construction: 2010, condition: used, machine/vehicle number: INS5, Technical Specifications & Performance Data This Divider Inserter by OMA is engineered for reliable insertion of cardboard partitions into cases at high efficiency. Built in 2010, it offers robust performance for industrial packaging and beverage production, making it a strong addition to any used bottling line or second hand packaging setup seeking improved product protection during transport. Manufacturer: OMA Model: INS ALV Year: 2010 Production speed: approximately 1200 cases/hour Case formats: 6-bottle and 12-bottle cases Head configuration: single-head Included equipment: vibratory belt/conveyor for partition handling Electrical supply: 230 V, 50 Hz Installed power: 1 kW Weight: 1000 kg Marking: CE Advanced Automation & Control Systems The machine is equipped with a dual-sided control interface, featuring a redundant keypad on both sides of the frame to improve operability and access for line personnel. This layout streamlines adjustments, format changes, and maintenance tasks, enabling safer and more efficient operation. The single-head design supports consistent partition placement with reduced complexity and quick routine checks. Production Line Integration Capabilities Designed for seamless integration within industrial packaging lines, this Divider Inserter can operate inline with case erectors, bottle/case packers, and case sealers. It suits both retrofit projects and new installations in beverage production environments. Format compatibility includes 6- and 12-bottle case patterns, with straightforward changeover procedures supported by the dual-sided controls. The unit handles corrugated carton cases and cardboard dividers commonly used to protect bottles during logistics, making it a practical fit for bottling equipment and broader packaging machinery layouts. Machine Condition & Maintenance History The machine is currently in production and available for testing. Its ongoing operation demonstrates maintained performance and readiness for integration into a working used bottling line or industrial packaging line with minimal commissioning time. Operational Performance & Versatility With a throughput of approximately 1200 cases per hour, the OMA INS ALV supports mid-speed lines requiring dependable partition insertion to minimize bottle-to-bottle contact. The included vibratory belt ensures smooth partition feeding and orientation, enhancing process stability and reducing jams. The single-head configuration prioritizes accuracy and mechanical simplicity, which translates into consistent results and lower routine service requirements. Installation Requirements & Site Preparation The unit operates on a standard 230 V, 50 Hz electrical supply with a modest installed power of 1 kW, supporting energy-efficient operation. Its 1000 kg construction delivers stability during high-duty cycles while remaining compact enough for typical packaging hall layouts. The machine’s footprint is well-suited for integration along existing conveyor systems upstream of case sealing and downstream of case packing. Ffsdjyh E Avepfx Ag Dsw Safety Standard...

Year of construction: 1995, condition: ready for operation (used), A fully automatic unscrewing machine M. Adelski is available. Unscrewing heads: 5, capacity range: 2000-12500bottles/h, working height: 1090mm, bottle types: NRW/Euro, bottle volume: 0.5l, machine dimensions X/Y: approx. 950mm/850mm, weight: approx. 1400kg, operating hours: approx. 8500h. Documentation available. An on-site inspection is possible. Fsdpeyhgncjfx Ag Djfw

Year of construction: 2011, condition: ready for operation (used), A complete bottle filling and capping line is available. Ring bowl diameter: 960mm, filling valve count: 24, capping stations (KK): 6, capping stations (SV): 6, capper diameter: 240mm, filler and capper pitch: 125mm, filling capacity (0.5l): 6000bottles/h, bottle volume: 330ml/500ml, operating hours: approx. 7200h. An on site inspection is possible. Ffodpfx Agsyhgnpo Dsw

Year of construction: 1998, condition: ready for operation (used), A glass bottle washing machine PAC Swiss is available. Washing capacity: 7500bottles/h, cycle time: 6.72s, throughput time: approx. 12min, bottle types: Euro/NRW/Ale, bottles per row: 14, max. bottles in the machine: 1456, bottle volume: 330ml/500ml, process: preheating/caustic treatment/recooling/spraying, machine dimensions X/Y/Z: approx. 7050mm/1800mm/2300mm, operating hours: approx. 14175h. Documentation available. On-site inspection is possible. Fodpfx Ajyhgnisg Defw

Year of construction: 2000, condition: ready for operation (used), A hot beverage filling and capping machine MBF is available. Filling stations: 35, capping heads: 4, bottle type: VdF, bottle volume: 1000ml/500ml, max. filling temperature: 95°C, screw cap: MCA aluminum standard, cap dimensions X/Y: 28mm/15mm, filling capacity: 7000bottles/h, bottle height (1l): 306.5mm, machine dimensions X/Y/Z: approx. 3400mm/2300mm/2600mm. Documentation available. On-site inspection is possible. Ffjdpeyhgn Ajfx Ag Dew

Year of construction: 2018, condition: used, machine/vehicle number: AT89, Used Tetra Pak helix accumulator 44 meters year 2018 The Used Tetra Pak helix accumulator 44 meters year 2018 efficiently accumulates and manages the production flow in aseptic packaging lines. Notably, Tetra Pak manufactured this model, identified as ACHX10-0400-44, in 2018 to handle brick-type carton containers. Technical and Functional Features To begin with, the Used Tetra Pak helix accumulator 44 meters year 2018 accumulates containers using a helical system that extends 44 meters. Its primary function is to compensate for speed variations between upstream and downstream machines. As a result, it optimizes production flow and prevents plant downtime. Furthermore, the ACHX10-0400-44 model provides high temporary storage capacity and maintains a continuous container flow without compromising structural integrity. Additionally, the helical architecture optimizes available space and reduces footprint compared to other linear accumulation systems. Consequently, thanks to this configuration, the Used Tetra Pak helix accumulator 44 meters year 2018 ensures high operational efficiency with a reduced footprint, making it particularly suitable for lines with complex layouts. Fedpfxsyhbxpj Ag Djfw Materials and Compatibility Moreover, the accumulator handles brick-type carton containers, ensuring gentle treatment that prevents deformations or damage to the packaging. In addition, the structure uses corrosion-resistant and easily sanitizable materials, thereby complying with food industry regulations. Similarly, the conveyor belts and internal components minimize friction, ensuring smooth container movement. Integration with the Production Line Importantly, the Used Tetra Pak helix accumulator integrates easily into existing packaging lines. This is primarily due to its compatibility with Tetra Pak filling and sealing machines. In particular, the advanced electronic control system synchronizes with production, dynamically adjusting the accumulation and release speed of containers based on operational needs. Consequently, this mechanism optimizes production flow management and significantly reduces the risk of congestion or slowdowns in the line. Operational Advantages By using the Used Tetra Pak helix accumulator manufacturers can significantly improve production efficiency. Specifically, it reduces machine downtime and optimizes overall plant performance. Furthermore, the compact and modular structure simplifies installation and maintenance, thus lowering operational costs. On top of that, Tetra Pak’s high-quality construction ensures system reliability, reinforcing the robustness and durability of its equipment. Conclusion of this Tetra Pak Accumulator All things considered, the Used Tetra Pak helix accumulator provides an advanced solution for managing production flow in aseptic packaging lines. Thanks to its storage capacity, operational efficiency, and compatibility with Tetra Pak systems, this model serves as an ideal option for plants requiring high performance and reliability in handling brick-type carton containers. Ultimately, it represents a reliable and effective investment for streamlining production processes.

Year of construction: 2012, condition: used, machine/vehicle number: AT92, Used Bottle Dryer Matrix year 2012 12000 bph The Used Bottle Dryer Matrix year 2012 12000 bph provides a linear drying solution for bottles in high-speed bottling lines. The Italian manufacturer Matrix built this model in 2012 and named it Dryer 1 neck. The system, therefore, uses targeted airflow to dry the neck area of each bottle efficiently. It processes up to 12,000 bottles per hour, which enables seamless integration into automated bottling systems. Mechanical Configuration and Operating Features This linear system guides bottles through a single-entry point, which ensures precise flow control and consistent alignment during drying. The Used Bottle Dryer Matrix year 2012 12000 bph includes six drying heads that direct airflow specifically to the neck. As a result, the unit delivers highly effective drying before labeling or secondary packaging. In addition, the machine handles all bottle formats without requiring mechanical changeovers. Consequently, operators can switch between formats quickly, maintaining flexibility across different production needs. Moreover, the uniform layout of the drying heads guarantees consistent results regardless of bottle size or shape. Because of its modular construction, technicians can perform cleaning and inspection operations with minimal downtime. Similarly, maintenance staff can access internal components without dismantling adjacent units. Dimensions, Electrical Supply, and Energy Use The machine measures 1000 mm in length, 1000 mm in depth, and 2000 mm in height. These compact dimensions allow technicians to install the dryer easily within standard bottling environments. Furthermore, its footprint prevents interference with upstream and downstream machinery. The Used Bottle Dryer Matrix year 2012 12000 bph operates on 400 Volts, at 50 Hz, and consumes 5.5 kW. These values match typical European industrial standards. Therefore, engineers can connect the unit without additional power conversion or infrastructure changes. In terms of energy efficiency, the machine balances high output with relatively low consumption. Additionally, the robust frame ensures mechanical stability during continuous use. As such, it supports uninterrupted production in demanding environments. Fsdpeyhbwlofx Ag Djfw Safety Systems, Integration, and Operational Status Matrix equipped the unit with comprehensive safety systems, which comply with regulations in force at the time of manufacture. These include emergency stop buttons and protective panels, both of which ensure operator safety during regular operation and maintenance. Moreover, these safeguards reduce the risk of accidents and equipment damage. The machine currently remains in ready-for-operation condition. For this reason, technical teams can deploy it without preliminary servicing or calibration. Moreover, its single-bottle entry system facilitates easy alignment with conveyors...

Year of construction: 2010, condition: used, machine/vehicle number: TNK7, Technical Specifications & Performance Data This aseptic storage tank is engineered for hygienic storage and buffering of sensitive liquid food products in beverage production and industrial packaging environments. Manufactured by Tetra Pak in 2010, it is ideal for second hand facilities upgrading or expanding an existing used bottling line with reliable aseptic capacity. Two units are available, each offering substantial storage volume with robust sanitary construction. Type: Aseptic storage tank for liquid food products Manufacturer: Tetra Pak Year: 2010 Nominal capacity (per tank): 13,000 liters Maximum product weight: Construction: High-quality stainless steel, sanitary design Valve system: Cluster valves for controlled, hygienic product flow Quantity available: 2 units (per-tank specification) Application: Aseptic storage of milk, flavored milk, juices, and liquid dairy products Advanced Automation & Control Systems The tank integrates seamlessly into automated aseptic processes. Cluster valves enable precise, automated product routing with minimized contamination risk and simplified cleaning transitions. The design supports CIP (Cleaning-in-Place), ensuring efficient sanitation cycles and repeatable hygienic performance across production shifts. The aseptic configuration is engineered to protect product integrity and maintain sterility from upstream processing through downstream filling and packaging machinery. Production Line Integration Capabilities This aseptic tank is designed to interface with UHT processing lines, fillers, and other bottling equipment within a used bottling line or new installation. It enables stable buffering between processing and filling, improving uptime and throughput in beverage production. The sanitary connections and cluster valve manifolds simplify tie-ins to existing pipelines and control strategies, facilitating integration into multi-product operations in dairy and juice applications. Machine Condition & Maintenance History These second hand tanks come from a professional food and beverage environment and are presented as ready for operation, consistent with Tetra Pak’s durable hygienic engineering. The aseptic configuration and CIP-ready design support ongoing sanitary maintenance programs and long service life in industrial packaging settings. Fsdpfeyhbm Tsx Ag Dsfw Operational Performance & Versatility Optimized for liquid dairy and juice products, the tank maintains sterility to help preserve product quality and shelf life prior to filling. The stainless steel construction, sanitary welds, and aseptic valves support stringent hygiene protocols. This configuration is well-suited for producers seeking dependable storage capacity to stabilize production, reduce changeover risks, and align processing cadence with filling schedules across beverage production lines. Installation Requirements & Site Preparation Installation typically requires appropriate floor space, access for piping to upstream/downstream equipment, and utilities compatible with aseptic processes. The tank supports CIP connections for caustic and rinse media, and the valve cluster accommodates ...

Year of construction: 2025, operating hours: 20 h, condition: like new (used), functionality: fully functional, We are offering this as-new ZONESUN ZS-DTGT4T Desktop 4 Heads Piston Filler, year of manufacture 2025. Manufacturer: zonesun Fsdpfx Ageygr Sks Dsfw Model: ZS-DTGT4T Year of manufacture: 2025 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: reconditioned (used), Year of construction: 2004, Nagel inspector for base, mouth, and residual liquid inspection, configured for 0.33 l longneck bottles (other formats possible), completely overhauled, available at short notice due to a cancelled order. Fedpsyc Tm Iofx Ag Defw

Year of construction: 2000, operating hours: 80,000 h, condition: used, machine/vehicle number: PX17, Technical Specifications & Performance DataThis Krones premix mixer is a robust processing unit designed for beverage production lines requiring reliable, high-throughput syrup and water mixing. Manufactured in 2000, it offers industrial performance and quality consistent with Krones engineering. The system is suitable for integration upstream of filling and carbonation stages within used bottling line environments and broader industrial packaging applications.Manufacturer: KronesYear: 2000Production capacity: up to 45,000 L/hElectrical rating: 230/400 V, 3~Frequency: 50 HzRated current: 87 AAllowable operating overpressure: up to 3.5 bar (vessel rating)Certification: CE marking; manufactured under ISO 9001 quality managementAdvanced Automation & Control SystemsThe premix system is configured for stable, repeatable mixing performance with industrial-grade electrical components. The three-phase power configuration at 230/400 V and 50 Hz supports dependable operation across beverage processing shifts. Safety and compliance are supported by CE marking and ISO 9001 manufacturing standards. The unit’s control architecture is suitable for integration with line-level PLC/HMI systems commonly used in beverage production.Three-phase 3~ electrical systemRated current 87 A for robust process dutyCE-compliant safety and quality designEngineered for consistent ratio control and process stabilityProduction Line Integration CapabilitiesEngineered for inline use, this premix mixer integrates seamlessly with upstream syrup room equipment and downstream carbonators, fillers, and packaging machinery. It supports second hand and retrofit projects, enhancing capacity and process stability in existing beverage production layouts. The system fits PET or glass bottle lines as part of a complete packaging chain, from processing to filling, labeling, and capping.Inline or standalone operation within beverage processingIdeal interface to carbonators and filling machinesSupports industrial packaging workflows in used bottling line upgradesFlexible adaptation for PET and glass bottling linesMachine Condition & Maintenance HistoryThe machine is installed under power and available for quick sale. It is not currently in active production and will require dismantling for removal and relocation. Operating hours are approximately 80,000, consistent with a well-maintained industrial processing unit of this class.Under power, not currently in productionApprox. 80,000 operating hoursAvailable for prompt sale and dismantlingOperational Performance & VersatilityDesigned for beverage production, the Krones premix mixer provides accurate blending of water and syrup for a wide spectrum of products. Its vessel overpressure rating up to 3.5 bar supports stable operation in line environments that may feed carbonation steps and high-speed filling. This makes it a strong fit for producers aiming to boost throughput, stabilize quality, and modernize existing second hand bottling equipment setups.High-throughput mixing up to 45,000 L/hSuitable for still and carbonated beverage processing workflowsConsistent dosing and mi... Ffedpfx Asycvuusg Dow

Year of construction: 2025, operating hours: 150 h, condition: like new (used), functionality: fully functional, We are offering this as-new semi-automatic filling and capping machine: Monoblock Tenco Jarsélite Semi-Automatic Compact Filler, year of construction 2025. Performance: up to max. 500 units/hour, depending on product, fill volume, and operator. Filling volumes: 50–1,300 ml, with precise dosing adjustment. The bottle neck can be flushed with nitrogen. This machine is suitable for filling virtually any product. This filling and capping machine is ideal for liquid and viscous products in the food, beverage, cosmetics, pet food, honey, and fruit brandy sectors. Ffedpoya Ar Ujfx Ag Dsw The machine handles a wide variety of product consistencies: Liquid products are fed directly via a tank connection, while viscous products can be added using the optionally available hopper. Depending on your requirements, the machine can be configured as a bottle or pouch filling system. Chunky products such as pesto, ketchup, soups, and sauces can also be processed easily. Various capping heads are available to enable flexible adaptation to different closure systems. With a special kit, spout pouches can also be filled and sealed, creating a 2-in-1 system (Pouchélite). We have integrated a nitrogen flushing feature for bottles and pouches. Currently, one capping head is included: 28 ROPP. The machine is operated solely via compressed air and enables hot filling. If you have any questions or require further information, please don't hesitate to contact us by message or phone.

Year of construction: 2023, condition: like new (used), functionality: fully functional, Small Parts Counter Caterpillar U-60 (5-25 mm) The Caterpillar U-60 small parts counter is a semi-automatic counting system designed to automatically achieve a target count. The system is ideally suited for stations requiring rapid part changes and for small to medium batch quantities. Input voltage: EU: 230 V AC, 50 Hz Electrical connection: single-phase Power: 120 W Weight: 70 kg Dimensions (H x W x L): 794 x 284 x 770 mm Functional description: Ffodpox Ex D Eefx Ag Djw One-time setup for a specific part Select recipe (part, number of bags, quantity per bag) Manually insert parts into the belt intake opening The system stops automatically once the target count is reached. Key Features: 99.9% accuracy Parts size range: 5 mm–25 mm Quick setup: approx. 60 seconds Single initial setup per part Object versatility: one system can count a wide range of item types Quick changeover between items Machine stops counting upon reaching the preset quantity User-friendly interface Count data is stored and can be easily retrieved.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, type of input current: AC, input voltage: 400 V, year of last overhaul: 2025, input frequency: 50 Hz, Equipment: documentation/manual, Manufactured by Eurostar Italy - one of the leading filling manufacturers Designed for filling Apple Cider, Beer, CSD and still drinks Triblock -rinser - filler - capper 2,000 BPH at 500ml bottles Fedpfx Agox A U Ure Djfw 3,000 BPH at 330ml bottles Isobaric Counterpressure Filling, designed for cider, beer, and other still & sparkling beverages Double Pre-Evacuation with Vacuum Pump, ensuring minimal oxygen pickup for superior product quality 316 Stainless Steel contact parts for superior hygiene and durability Pneumatic Bottle Lifters - overhauled 2025 Twin-channel rinser with final blow-off - overhauled 2025 Crown Cap (26mm caps) Capper Bypass - to feed to other cappers Touch Screen Control Panel for easy operation and monitoring Siemens PLC System, providing precise process automation and flexibility Variable speed control via inverter drive CIP Cups, Cleaning fluid can be recycled Change Parts Included for 250ml, 330ml, 500ml, and 750ml glass bottles Heavy-duty stainless steel frame CE-compliant safety Includes all manuals Spare Parts package Spare Fill tubes - new for adaptation to any bottle fill height Spare filling valve seals etc. Can be loaded to buyer's transport

Year of construction: 2015, condition: ready for operation (used), Offered is an incomplete returnable glass filling and packaging line consisting of the following machines and units: Unloader: Kettner, crate washer: Bohrer, insert screens, 1x zone, 2 inverters, unpacker: Kettner Blitzpac A35 T1 year 2002, unscrewer: Adelski, cleaning machine: Krones Einend KESK year 1994, approx. 19.303h, EBI inspection machine: Heuft Spectrum Inline IR year approx. 2015, filler: Cobert, 60 filling stations, approx. 15,000 bottles/h at 1.0l, 1 pc. SV 10-digit, 2 pcs. KK 10-digit, twist-off capper: SWC year 2008, cooler: NIKO year 2015, temperature control: approx. 85°C - 30°C, labelling machine: Krones Prontomatic K090-A43, body, front and back labelling, dating: Markem Image, loader: Kettner Bojok, Born Binder. Processable containers/formats: bottles 0.2l/30-case, 0.25l (RW), 0.5l/24-case, 0.7l juice bottle, 0.75l (EW), 1l VdF/6-case/12-case, crates/formats: 1l VdF/12-case/6-case KuKa, 0.75l VdF/12-case KuKa, 0.2l/30-case KuKa, 1l/12-case carton. Viewing possible by appointment. Fodpfx Aox Aupvjg Djfw

Year of construction: 1994, condition: ready for operation (used), Offered is a bottle packer/bottle case packer year 1994. Euro bottle 20 x 0.5l, capacity approx. 200crates/h, regularly maintained. A viewing is possible by arrangement. Fodpsx Aiz Tofx Ag Dofw

Year of construction: 1997, condition: ready for operation (used), Etanorm SYN 80 -250, centrifugal pump for diesel fuel, 200 m³/h. Electric motor Siemens, 55 kW, 2940 rpm, 100 A. You can view all available pumps in the catalogue. Fedpfxjxzcbkj Ag Djfw

Condition: ready for operation (used), Offered is a feed turntable for bottle infeed/collection table, diameter 1000mm, motor drive clockwise. Viewing is possible by arrangement. Fedpsxy R Ebofx Ag Dofw

Year of construction: 2001, condition: ready for operation (used), A case unscrewer/case uncorker Rink is available. Unscrewing heads: 4, uncorking heads: 2, container configuration: 20x0.5l NRW. Machine dimensions X/Y/Z: approx. 2900mm/1300mm/2000mm, control system: Siemens Simatic S7. Documentation available. An on-site inspection is possible. Fodpfx Agsxxzihj Defw