Livingston Machine Tools

Condition: not inspected (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: UCP 1000, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Siemens 828D, General specifications Control: Siemens 828D Weight: Approx. 10,100 kg Machine Type: 5-axis vertical machining centre Year of manufacture: 2001 M/C Model: UCP 1000 Power requirements: 3 Phase 400 V (100 A) Travel and movement Gbjdpfx Aceyz Tnwewsk X-axis: 1,000 mm Y-axis: 750 mm or 800 mm Z-axis: 750 mm or 800 mm Rapid traverse rate: 30 m/min Max. working feed: 10 m/min Spindle and tool changer Spindle speed: Max. 15,000 rpm Spindle taper: HSK-A63 Tool magazine: 60 stations Max. tool weight: 8 kg Max. tool length: 300 mm Table and axis NC rotary swivel table: Diameter 800 mm or 1,100 mm Table rotation speed: 12 rpm Max. workpiece weight: 1,500 kg Number of controlled axes: 5 Other features Spindle torque: 127 Nm (at 40% duty cycle) Axis force: 10,000 N (X and Y/Z) Coolant: Through spindle coolant available

Condition: like new (used), Year of construction: 2020, operating hours: 16,785 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 610 mm, CNC Machining Center Manufacturer: Fehlmann, Model: Picomax 95 Year of manufacture: 2020 Technical Data Make: Fehlmann Model: Picomax 95 Year: 2020 Operating hours: 16,785 total / 7,181 spindle hours Spindle speed: 50 – 18,000 rpm Spindle power: 25.2 kW Max. torque: 120 Nm at 50–2,010 rpm Control: Heidenhain TNC 640 X-axis travel: 800 mm Y-axis travel: 500 mm Z-axis travel: 610 mm Machine table: 1,600 x 550 mm, 10 slots, 12H8, 50 mm spacing XYZ positioning accuracy (ISO 230-2): A = 0.005 mm / R = 0.003 mm Electrical connection: 400 V 3P+N+E / 50 Hz / 63 A (T) Standard Equipment - Feed rate range: 1 – 30,000 mm/min (standard) - Automatic tool changer, operator side, main time parallel loading incl. Fehlmann extended tool management on TNC 640 - Direct linear measurement system with pressurized air in XYZ - Pressurized air cleaning with activated carbon filter - Coolant system with chip drawer and fine-chip filter insert, coolant spray gun, chip flushing, machine shutdown via M function - Cooled motor spindle and Y-axis drive - Spindle and thermal expansion compensation - Graphical machine diagnostics system via softkey - Drawer block, lower right - Interfaces: RJ45, USB, RS232 - 48-position chain magazine HSK-A63, double-gripper tool changer. Magazine accessible operator side, parallel to machining - Electronic handwheel HR 510 for TNC 640 - Active cooling system for motor spindle and Y-axis drive - Work area enclosure with polycarbonate safety windows; powder-coated; large-opening stainless steel sliding door at front/top for crane loading - Left side door with lockable polycarbonate windows Gsdpeyz Tlvofx Acwsbk - Chip flushing via machine bed - FEHLMANN cycle package Special Equipment - Automatic length compensation of the milling spindle via direct measuring system - Tool clamping system HSK-A63 - Leakage sensor to monitor coolant supply through spindle - Automatic right-side enclosure door for PICOMAX 95 - ProfiNet robot interface to PICOMAX as per Fehlmann interface description for customer-specific robot integration - Coolant system 700 l, BF/HD80, with through-spindle cooling, 80 bar, and chip conveyor - Emulsion and oil mist extractor system for work area; programmable operation via M function: on, off, intermittent - 3D probing system Blum TC52LF incl. spindle adapter HSK-A63 - LaserControl Blum LC50-DIGILOG for tool measurement and monitoring D 0.02 – 120 mm - Reference tool HSK-A63, Ø 8 mm - FEHLMANN 5-axis cycle package Automatic Indexing & Swivel Unit ATS 200 D - with Schunk TANDEM center vise KSP100 Automation – Unirobot pro Unirobot M-20iA-10P pro Robot: Fanuc 6-axis industrial robot - Manipulator: FANUC M-20iA - Max. payload: 20 kg - Teach pendant Safety fence system uniprotect Drawer system incl. workpiece carrier ALB - 10 pneumatic drawers with workpiece carriers (400 x 600 mm) FMB quick-change head Workpiece detection via light barrier Profinet interface Robot cell incl. program creation - Double gripper system Gripper modules: SCHUNK JGP 100-1 Max. workpiece weight: 3.3 kg All information subject to change. A demonstration is possible at any time in our showroom.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, CNC machining center DECKEL MAHO DMC 835V Year of manufacture: 2007 Control: Siemens 840D Gsdpfx Acsyzywfewobk 4th axis (rotary table) controlled including touch probe Technical data: Tool holder: HSK63 Tool changer with 30 positions X-axis: 835 mm Y-axis: 510 mm Z-axis: 510 mm

Condition: excellent (used), Year of construction: 2015, travel distance X-axis: 850 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, total length: 8,000 mm, total width: 3,325 mm, table width: 500 mm, table length: 600 mm, table load: 500 kg, overall weight: 12,000 kg, spindle motor power: 11,000 W, 5-axis CNC machine (VMC) MAZAK - VARIAXIS J600-5X MACH-ID 9484 Make: MAZAK Type: VARIAXIS J600-5X Control: MAZATROL matrix 2 Year: 2015 5 Axis Manufacturing cell with automation LANG 20 positions Renishaw 3D Taster with pre-setter ball LANG Preperation system with  vacuum 25 Units LANG pallet with vice / clamp / chucks Only 7155 Working hours ! New EUR 500.000 X - Travel: 850mm Y - Travel: 550mm Godpfxeyyybhj Acwebk Z - Travel: 510mm A - Axis: -120 to +30° B - Axis: - 120 to +30° Table Length: 600mm Table Width: 500mm Table load: 500 Table Ø: 600mm Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Feed rate B-Axis: 30Degrees/min Spindle Taper: 40ISO/Bt/Mk Power on spindle: 11kW Speeds / ranges: 12000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 8000mm Width: 3325mm Height: 3060mm Weight: 12000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2005, operating hours: 1,600 h, total height: 2,450 mm, total length: 3,300 mm, total width: 2,200 mm, Empty weight: 5.100 kg Price: On request Gedpeyyx Ndjfx Acwsbk - Year: 2005 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: - Operating hours: 1600 - Drive system: CNC - Number of axes [pcs]: 4 - X-axis travel [mm]: 850 - Y-axis travel [mm]: 510 - Z-axis travel [mm]: 610 - B-axis rotation [°]: 360 - Tool holder: BT40 - Main spindle power [kW]: 7.5 - Max. spindle speed [rpm]: 8000 - Options: Tool magazine - └ Tool magazine [pcs.]: 16 - Transport dimensions: 3300mm x 2200mm x 2450mm (l x w x h) - Transport weight [kg]: 5100kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 14696, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, total height: 2,750 mm, total length: 4,600 mm, total width: 3,100 mm, table width: 800 mm, table length: 465 mm, rotational speed (min.): 10,000 rpm, rotational speed (max.): 40,000 rpm, overall weight: 6,060 kg, number of slots in tool magazine: 30, We are offering this used Hermle C 600 V vertical machining center, year of manufacture 2001. Gbsdsyyv Ahepfx Acwjk

Condition: ready for operation (used), Year of construction: 2005, operating hours: 15,578 h, travel distance X-axis: 880 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, spindle speed (max.): 16,000 rpm, number of axes: 5, This 5-axis DECKEL MAHO DMU 80 MonoBLOCK vertical machining center was manufactured in 2005. It features a 16,000 rpm spindle speed, a 40-slot tool changer, and an SK 40 tool holder. Equipped with an NC rotary table, a controlled B-axis in the milling head, and a chip conveyor, this machine is ideal for complex machining tasks. The DECKEL MAHO DMU 80 MonoBLOCK we have for sale is a robust choice for precision engineering. Contact us for more information. Additional equipment • Belt filter system • Coolant system • NC rotary table • Controlled B-axis in the milling head • Chip conveyor included • Coolant system included • 3D probe not included • Zero point clamping system not included • No holders or tools included Machine Benefits Technical Machine Benefits • Integrated coolant system with 40 bar pressure • Tool changer - number of places : 40 Extra Information Machine still under powerMachine on: 41,600 hSpindle Hours: 15.578h Technical Specification Taper Size SK 40 Gjdpfx Acsyyvchewjbk

Condition: good (used), Year of construction: 1998, Table size: 1150 x 510 mm Tool holder: BT 40 Travel distances: X-axis: 800 mm Y-axis: 510 mm Z-axis: 510 mm Speed range: max. 10,000 rpm Machine dimensions (L x W x H): 3200 x 2800 x 2497 mm Gbodjyyq Niepfx Acwok Weight: 6,600 kg Accessories / Special features: • CNC control YASNAC J300M (comparable to "SIEMENS") • 30-station tool changer • Screw chip conveyor • Coolant system • CE conformity Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1999, functionality: limited functionality, travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: MSC501, table width: 1,100 mm, table height: 500 mm, table load: 800 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 20, Equipment: chip conveyor, documentation/manual, Manufacturer: Mori Seiki Model: SV-500/40 Dimensions: Gbedpfxeyymt De Acwjk - Length: 2,350.0 mm - Width: 2,336.8 mm - Height: 2,844.8 mm Weight: 6,600.0 kg Axis travel distances: - X-axis: 800 mm - Y-axis: 510 mm - Z-axis: 510 mm Table dimensions: - Length: 1,100 mm - Width: 600 mm Maximum workpiece weight: 1,000 kg Number of tool stations: 20 Maximum spindle speed: 10,000 RPM Spindle motor power: 22.4 kW Advantages: - High precision and accuracy due to advanced construction and design. - Versatile machining capabilities with a maximum spindle speed of 10,000 rpm, allowing efficient processing of various materials. - Robust construction with a significant weight of 6,600 kg, ensuring stability during operation. - Generous tool storage with 20 tool positions, enabling quick tool changes and increased productivity. - Capable of handling heavy workpieces up to 1,000 kg, making it suitable for large-scale production tasks.

Condition: excellent (used), Year of construction: 2005, x-travel 835 mm y-travel 510 mm Gbedpfx Acjyxxyyowsk z-travel 510 mm CNC-control SIEMENS table-size 1000 x 560 mm max. table load 800 kg spindle taper SK 40 spindle turning speed range 20 - 8.000 U/min feed stepless 1 - 20.000 mm/min rapid traverse 20 m/min drive capacity - spindle motor 13 / 9 kW tool change unit 20 Pos voltage 380 V total power requirement 35 kVA weight of the machine ca. 4,5 t dimensions of the machine ca. 3,50 x 3,50 x 2,70 m - Serial-No.: 15415015634 - Main spindle NEW bearings - Machine ON: 18,484 h Program ON: 9,153 h - SIEMENS control system - With NC sub-unit (4th axis, controlled via M-code) - Chip tray (no chip conveyor) - Coolant system

Condition: excellent (used), Year of construction: 2003, operating hours: 49,000 h, functionality: fully functional, Basic Data Hermle Machining Center C 30 V Year of manufacture: 2003 Serial number: 16112 Technical Specifications Heidenhain iTNC 530 Spindle: 10,000 rpm SK 40 32 tool positions Linear axes, standard version Rigid clamping table Internal coolant supply 40 bar Included / Installed Standard filter Standard chip conveyor Standard coolant system Flange for extraction Purge air for scales Paper band filter for ICS (internal coolant system) Scraper-type conveyor for ICS Automatic cabin door Manual cabin roof Laminated safety glass window Electrical thermal compensation iTNC Renishaw probe incl. preparation Gjdpfxoyxrr Ne Acwjbk Chip wash-down gun Key Information from the Spec Sheet Machine currently still under power Inspection possible by appointment Short-term delivery possible Not Included / Limitations Without tools Without workholding fixtures Machine accessories and documentation only as far as still available (books included) Condition of the Machine: Very good / Exceptionally high quality / Extremely clean and well maintained Single-part production in custom gearbox manufacturing The machine receives substantial annual preventive maintenance – an absolute rarity

Condition: used, Year of construction: 2013, Travel: X-800 mm, Y-600 mm, Z-500 mm Control: Heidenhain iTNC530 Spindle speed: 15.000 U/min tool magazine: 30 seats probe: Heidenhain electric handwheel: Heidenhain table size: 1000 mm x 560 mm Spänewanne: . Godjyxh Hpjpfx Acwebk

Condition: good (used), Year of construction: 2010, (ex Formula 1 ) Traverses XYZ: 800 x 800 x 550mm, 500 x 500mm table, A axis -91 / + 121 degrees, C axis, 360 degrees, Heidenhain TNC530, Gbjdpfxeywv N Ae Acwsk Spindle Speed 20000rpm, 36kW Spindle Motor, HSK A63 Spindle Taper, 30 tools, swarf conveyor, through spindle coolant,

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 510 mm, total height: 2,200 mm, total width: 2,300 mm, table load: 400 kg, overall weight: 6,500 kg, spindle speed (max.): 8,000 rpm, tool weight: 7,000 g, product length (max.): 2,305 mm, number of axes: 3, This 3-axis DART VMC650 XL/A T.S was manufactured in 2000. It features an X-axis travel of 800 mm, Y-axis travel of 500 mm, and Z-axis travel of 510 mm. The machine includes a table size of 1000 × 500 mm and a maximum table load of 400 kg. If you are looking to get high-quality machining capabilities, consider the DART VMC650 XL/A T.S vertical machining centre we have for sale. Contact us for further details. • Table: • Size: 1000 × 500 mm • Feed rates: • Rapid traverse X/Y: → 30 m/min • Rapid traverse Z: → 20 m/min • Cutting feed: 1–2000 mm/min • Axes / Drives (feed motors): Gbedpjyv A Rwefx Acwek • X: 1.8 kW • Y: 1.8 kW • Z: 1–3 kW • ATC (tool changer): • Tool capacity: 24 • Max tool diameter: 100 mm (adjacent tools) / 200 mm (no adjacent) • Max tool length: 200 mm Technical Specification Taper Size BT 40

Condition: used, Year of construction: 1999, operating hours: 34,000 h, functionality: fully functional, Hermle C800 U • Control: Heidenhain iTNC 530 • Year of manufacture: 1999 • Working range X/Y/Z: 800/600/500mm • Swivel range A-axis: +20°/-90° Gedpfxeyvkrvs Acwsbk • Rotary table C-axis: 360° • Clamping surface: 540x540mm (interference circle Ø630mm) • Spindle: HSK 63, 15,000 rpm (Diebold; MSG-E205.15-15AK5) • Pick-up magazine: 29 stations • Additional magazine: 58 stations • Coolant supply: external + through spindle (IKZ, 40 bar) • MMS: Rother Aerosolmaster 4000 • 3D probe: Heidenhain TS 642 • Other: Electronic handwheel • Chip conveyor: Knoll • Coolant system: Knoll

Condition: good (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 1,000 kg, table width: 600 mm, table length: 1,100 mm, overall weight: 6,600 kg, spindle speed (max.): 10,000 rpm, Manufacturer: Mori Seiki Model: SV-50 Control: MSC 516 MB Axis: 3+2 (Nikken) X / Y / Z Travel: 800 × 510 × 510 mm Table size: 1100 × 600 mm Max. table load: 1,000 kg Spindle: BT40 & 30 positions Spindle speed: 10,000 rpm Tool changer: 20–30 stations Machine weight: approx. 7,000 kg Availability: From June SOLDE GmbH specializes in the purchase, sale, dismantling, and loading of industrial machinery. With our expertise, we also handle the entire process, including disassembly, transport preparation, and export. We operate our projects throughout Europe, primarily with large machine tools such as machining centers, milling machines, and boring mills. Godpfx Acoyuw Akewobk

Condition: used, Year of construction: 1994, Bridgeport VMC560/22 Vertical Machining Centre, S/No. 35149 (1994). Country of Origin: United Kingdom with Heidenhain Control, 22 Position ATC, Qty of BT40 Tool Holders Gsdpeyuvyuefx Acwebk Location: This lot is located in Burton-on-Trent, UK. A charge of £250 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 2001, MACH MIND VMC 1000 - A MACHINING CENTER CNC FANUC SERIES O – MD TABLE SIZE: 1,200 mm x 600 mm MAXIMUM ALLOWED TABLE LOAD: 850 KG TRAVELS: X: 1,020 mm Gbodpfsyuqapsx Acwok Y: 610 mm Z: 610 mm MAX. DISTANCE TABLE – SPINDLE: 135 – 745 mm SPINDLE TAPER: BT 40 SPINDLE SPEED: 60 – 8,000 RPM TOOL MAGAZINE: 24 POSITIONS CHIP COLLECTION TANK WEIGHT: 6,000 KG COMPLETE WITH FULL DOCUMENTATION YEAR: 2001

Condition: used, Year of construction: 2003, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 560 mm, Year of manufacture: 2003 CNC control: FANUC Series 18-M Machine weight: 6,000 kg Machine dimensions Length: 3,200 mm Width: 2,655 mm Height: 2,750 mm Spindle Spindle taper: ISO 40 Spindle speed: 8,000 rpm Gbodpfx Aoyt Rtajcwek Spindle motor power: 11 kW Working capacity X-axis: 1,020 mm Y-axis: 550 mm Z-axis: 560 mm Distance spindle nose – table surface: 150 – 710 mm Distance spindle center – column: 600 mm Table Table dimensions: 1,250 × 650 mm Table load capacity: 1,000 kg Feed rates Rapid traverse X / Y / Z: 20,000 mm/min Working feed rate X / Y / Z: 1 – 10,000 mm/min Tool changer Tool holder: BT-40 Tool magazine: 24 positions Tool diameter: with adjacent tools: Ø90 mm with free position: Ø135 mm Maximum tool length: 300 mm Maximum tool weight: 6 kg Equipment Screw-type chip conveyor Coolant collection tank with washdown pump Spindle line air conditioner and transformer Machine manuals Electrical diagrams CE declaration

Condition: ready for operation (used), Year of construction: 2013, operating hours: 31,460 h, travel distance X-axis: 935 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 650 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 HSCI, table load: 1,500 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 60, number of axes: 5, This 5-axis DMG MORI DMU 85 monoBLOCK was manufactured in 2013. It features an impressive X-axis travel of 935 mm, Y-axis travel of 850 mm, and Z-axis travel of 650 mm. The machine includes a robust table size of 1,040 mm and a maximum table load of 1,500 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 85 monoBLOCK vertical machining centre we have for sale. Contact us for further details. • Max feedrate: 40,000 mm/min • Table size: Ø 1,040 mm • Through-spindle coolant: 20 bar • Operating mode 4: machining process control (work with open work area door allowed) • Repairs/maintenance: • C-axis seal replaced just after warranty (improved version) • Spindle replaced (05/2021) • Machine measured last year – circular interpolation (Ballbar) within tolerance • Typical use: • Duralumin machining 80% overall • 3-axis: 50% • 5-axis: 40% (up to 10% 5-axis continuous) Additional equipment • Measuring probe: TS649 • Tool probe: Blum Laser • 3D quickSET • Electric handwheel • Rinsing gun • Chip conveyor Gjdjyt Rdrjpfx Acwjbk Technical Specification Taper Size HSK 63

Condition: excellent (used), Year of construction: 2010, DMG DMU 80 monoBLOCK, 5-axis Year of manufacture: 2010 Control: iTNC 530 Technical specifications x-travel 880 mm y-travel 630 mm z-travel 630 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 12.000 min/-1 tool taper SK40 swivel milling head B-axis: +30° / -120 ° table surface area Ø 700 / 1.250 x 700 mm max. table load 650 kg NC rotary table, integrated, C-axis: 360 ° number of toolpositions 2x16 pos. tool taper SK40 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool weight 8,0 kg max. tool length 315 mm feed speeds max. 30.000 mm/min rapid traverse 30 m/min total power requirement 48 kVA weight of the machine ca. 12 t Gbjdpfx Acoytfn Sewjk dimensions of the machine ca. 4,5 x 4,0 x 2,6 m Accessories/options: - swarf conveyor - replaced X/Y/Z ball screws and spindle in 2019 - full set of documentations - precision vice - tool holders

Condition: ready for operation (used), Year of construction: 2006, DMG DMC75V linear, machining center, 5 axis Year: 2006 x-travel 885 mm y-travel 600 mm z-travel 600 mm control iTNC 530 Heidenhain Max. rpm 1 - 28.000 min/-1 power capacity - main spindel 35 / 25 kW max. Torque 119 / 85 Nm tool taper HSK A63 Gedpoytd E Njfx Acwebk Swivel range milling spindle B: -10° / +110° ° spindle bearing diameter 80 mm table diameter 750 mm rotation range C: 360 ° rotary speed max. 100 min/-1 max. table load 600 kg feed speeds 1 - 90.000 mm/min rapid traverse 90 m/min Feed force X/Y: 13,8 kN Feed force Z: 10,35 kN number of toolpositions 30 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 140 mm max. tool length 300 mm max. tool weight 10 kg max. workpiece height 460 mm Max. Workpiece Area ca. 750 x 600 mm passage max. 600 mm total power requirement 60 kVA weight of the machine ca. 12 t dimensions of the machine ca. 4,5 x 4,5 x 3,0 m Accessories/options: - including Fanuc robot - including palettizing system - 28000 rpm Kessler spindle - Through spindle coolant - Swarf conveyor - Clamping system Vice with jaws - full set of manuals

Condition: used, Year of construction: 2010, Technical details: x-travel: 800 mm y-travel: 685 mm z-travel: 630 mm c-axis: 360° (Planscheibe-Tisch) control: Siemens 840D Power Line Gbjdpfxoytcf Ue Acwjk spindle speed:: 10.500 - 20.000 U/min max. torque on the spindle: 180 Nm tool taper: HSK -A63 DIN 69893 tool changer with: 40 places no. of tables: 2 table swivelabel +/-: je 120 (a-Achse) ° table surface area: 280 x 275 mm table load capacity: 320 kg interface: RS232 spindle hours: 38.700 h Total power requirement: 37 kW dimension machine xH: 4,0 x 4,4 x 3,0 m dimensions LxWxH: Späneförderer: 2,1 x 1,05 x 1,5 m dimensions L x W x H: Kühlschmieranlage: 1,3 x 1.6 x 1,95 m 5 - axis machining center CNC machining center Clamping table for 4th and 5th axis (swivel 120° right/left/speed 50 rpm and turn with faceplate Ø 280mm/200 rpm) max. workpiece size 940 x 650mm for/on table with chip conveyor make Knoll, 750 K-1/150; year of manufacture 2009 Bürener coolant system with paper belt filter belt width 700mm; year of manufacture 2009 for both control cabinets with cooler Rittal Accessories exclusive i.D. *

Condition: excellent (used), Year of construction: 2014, operating hours: 4,684 h, functionality: fully functional, Controller NCT201 Table size: 950 x 500 mm Maximum workpiece weight: 500 kgs Travel: X 850 mm Travel: Y 510 mm Travel: Z 510 mm 16-position tool changer Spindle taper: SK40 Motor spindle speed: 20 – 10 000 rpm Machine weight: 5,200 kgs Gedpfx Aceyr Ildowobk Machine dimensions: 2900 x 2330 x 2685 mm Equipment, accessories - Electronic handwheel - 3D touch probe - Several tool holders - Operating manual Very good condition.

Condition: not inspected (used), Year of construction: 1990, functionality: unexamined, machine/vehicle number: 5098, travel distance X-axis: 960 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 380 mm, controller model: HEIDENHAIN TNC 425, spindle speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submission of a bid constitutes an obligation to collect the item within the specified period from 04/05/26 to 07/05/26. TECHNICAL DETAILS Travel X-axis: 960 mm Travel Y-axis: 380 mm Travel Z-axis: 380 mm Table dimensions: 700 x 360 mm Number x width x spacing of T-slots: 3 x 18 x 110 mm Distance from table to floor: 840 mm Maximum table load: 300 kg Distance from table center to column: min. 190 mm, max. 570 mm Positioning accuracy: ±0.01 mm Repeatability: ±0.005 mm Resolution: 0.001 mm Rapid traverse: 15 m/min Spindle speed: 100 to 6,000 rpm Spindle taper: ISO 40 Ball screw X and Y axis: 32 x 10 mm lead diameter Maximum tool diameter (adjacent tool stations occupied): 85 mm Maximum tool diameter (adjacent tool stations free): 135 mm Maximum tool length: 250 mm Permissible tool weight per station: 6 kg Maximum total tool weight: 60 kg MACHINE DETAILS Control: HEIDENHAIN TNC 425 Connected load: 13 kW Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,000 x 2,450 mm Weight: 3,500 kg EQUIPMENT 16-position tool changer 3D probe Note: The machine vice shown in the photos is not included in the scope of delivery. Godpsyr Hlpsfx Acwebk External reference: 25