Yummi Limited

Year of construction: 2016, condition: ready for operation (used), - USED - TRAVELLING COLUMN MILLING MACHINE LONGITUDINAL TRAVEL: 6000 mm TRANSVERSAL TRAVEL: 1500 mm VERTICAL TRAVEL: 2500 mm RAPID FEEDS L-T-V: 35 m/min SPINDLE: 1180 Nm; 42 kW; 337- 5000 rpm WORKTABLE: 300 x 2500 x 7000 mm HEAD: ISO 50 ; MILLESIMAL POSITIONING ; A/B AXIS AUTOMATIC TOOL MAGAZINE: 12 POS; PICK-UP CONTROL UNIT: HEIDENHAIN TNC 640 Iodpfexpkxtox Aacsbc HIGH PRESSURE COOLANT: 20 Bar NOTE: AUTOMATIC HEAD CHANGE; COMPRESSED AIR INSIDE THE TOOL; RTCP; AUTOCAL SOFTWARE FOR AUTOMATIC CALIBRATION

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 1,350 h, load capacity: 5,000 kg, lifting height: 25,000 mm, fuel type: diesel, mast type: telescopic, construction height: 3,050 mm, power: 115 kW (156.36 HP), fork length: 1,200 mm, empty load weight: 18,900 kg, total length: 7,840 mm, drive type: Diesel, construction width: 2,490 mm, Rotating Telehandler Load Centre: 500 mm Mast Type: Telescopic Transmission: Hydrostatic Ibedpfx Asxpkxmjacjc Speed Class: 20 km/h Condition: Operational and fully functional Technical Condition: Good Front Tyres Type: Pneumatic Front Tyres Size: 445/65 R22.5 Front Tyre Condition: 80–100% Rear Tyres Type: Pneumatic Rear Tyres Size: 445/65 R22.5 Rear Tyre Condition: 80–100% Description: The alternative to a mobile crane, wheel loader, or rigid telehandler. The Manitou MRT 2550 Privilege Plus rotating telehandler is the perfect construction machine for the job. It can handle loads of up to 5,000 kg and work at heights up to 25 m. The versatile 3-in-1 machine (telehandler + crane + work platform) provides a wide range of daily applications. Its four-section boom and 360° rotation capability allow for various handling tasks to be completed from a fixed position. Equipment: - Third hydraulic valve - Work platform pre-installation with radio remote control - Fork carriage PFB/1320 mm - Forks 150 x 50 x 1200 mm - Load backrest - 7'' LCD colour display - Automatic parking brake - Return line - Tyres 445/65 R 22.5 - Reverse warning signal - Rotating beacon - Attachment recognition system - CAN bus control - AdBlue

Condition: used, functionality: fully functional, machine/vehicle number: 6616465, Year of construction: 2021, operating hours: 5,407 h, load capacity: 2,200 kg, fuel type: electric, construction height: 1,290 mm, fork length: 1,600 mm, empty load weight: 635 kg, drive type: Elektro, Low-lift pallet truck Isdpfxoxpkxgo Aacjbc Chassis number: 6616465 Transmission: Electric-AC, stepless Technical condition: good Front tyre type: Polyurethane Rear tyre type: Polyurethane Battery voltage: 24V Battery type: PzS Description: BT LPE 220 Year of manufacture: 2021 Operating hours: 8,327 The machine is in very good visual and technical condition. Charger available upon request. Subject to errors and prior sale. If you haven’t found the forklift you are looking for, please contact us. We have a large selection of additional machines on site.

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 5,731 h, load capacity: 11,400 kg, lifting height: 4,230 mm, fuel type: diesel, mast type: standard, construction height: 3,420 mm, fork carriage width: 4,860 mm, fork length: 1,600 mm, empty load weight: 18,300 kg, total length: 4,050 mm, drive type: Diesel, construction width: 3,300 mm, Four-way side loader Load centre of gravity: 600 Fork width: 250 mm Fork thickness: 100 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tires type: bandages Front tires size: 1016x508x762 Rear tires type: super elastic Rear tires size: 400/60-15 Description: In addition to this Combilift model, we have around 200 heavy-duty forklifts, compact forklifts, forklifts & side loaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always possible for us. We are also happy to buy your used vehicle freely, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this C14000 P.S.: Our forklift master workshop specializes in repairs, maintenance, overhauls and special construction for forklifts from 8 tons. We would also be happy to exhibit your vehicle for commission sale. Fork positioner, Ibodpfx Aoxpkwvoacsc Heating, full cabin, Platform height: 1010 mm

Condition: new, overall weight: 39,000 kg, empty load weight: 7,912 kg, maximum load weight: 31,088 kg, axle configuration: 3 axles, loading space length: 13,625 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 91 m³, suspension: air, tire size: 385/65 R22,5, Year of construction: 2025, Equipment: ABS, Unladen weight: 7,912 kg, permissible total weight: 39,000 kg, cargo space (L x W x H): 13,625 mm x 2,480 mm x 2,700 mm. Tire size: 385/65 R22.5, cargo volume: 91 m³. 1st axle: , 2nd axle: , 3rd axle: , air suspension, underrun protection, pallet box, electronic braking system (EBS), two fire extinguisher mounts, toolbox, two spare wheel holders, bolted chassis, 1x 15-pin and 2x 7-pin connectors, anti-spray, light alloy rims, telematics system, impact buffers. You can find our complete range of vehicles on our website. Interested in financing? With our Value Added Services, we offer you customized financing options, full service, and telematics solutions. We are happy to advise you. Iodoxpkwpopfx Aacsbc

Condition: used, overall weight: 36,000 kg, empty load weight: 6,216 kg, maximum load weight: 29,784 kg, axle configuration: 3 axles, loading space length: 7,480 mm, loading space width: 2,354 mm, loading space height: 1,660 mm, loading space volume: 29 m³, first registration: 05/2021, suspension: air, tire size: 385/65 R22,5, Year of construction: 2021, mileage: 435,300 km, Equipment: ABS, Unladen weight: 6,216 kg, permissible gross weight: 36,000 kg, cargo area (L x W x H): 7,480 mm x 2,354 mm x 1,660 mm. Tire size: 385/65 R22.5, load volume: 29 m³. 1st axle: , 2nd axle: , 3rd axle: , air suspension, foldable underrun protection, front lift axle, electronic braking system (EBS), pendulum tailgate (overlapping), grain slider, rolling roof tarp, hydraulic cylinder (low pressure), 1x15-pin and 2x7-pin connectors, antispray. You can find our entire vehicle portfolio at . Looking for financing? With our Value Added Service, we offer you tailored financing solutions, full service, and telematics services. We are happy to advise you. Iedpfexpkwiex Aacobc

Condition: used, overall weight: 37,000 kg, empty load weight: 5,700 kg, axle configuration: 3 axles, first registration: 04/2018, next inspection (TÜV): 11/2025, suspension: air, color: grey, tire size: 385/55 R22,5, Year of construction: 2018, mileage: 212,386 km, Equipment: ABS, Unladen weight: 5700 kg, permissible total weight: 37000 kg, tyre size: 385/55 R22.5, 1st axle: , 2nd axle: , 3rd axle: , air suspension, underrun protection, front lift axle, electronic braking system (EBS), connection plug 1x15 and 2x7 pin, anti-spray, you can find our entire range of vehicles at . Interested in financing? With our Value Added Service, we offer you individual financing solutions, full-service and telematics services. We are happy to advise you. Ijdpfx Aaexpkwcscobc

Condition: used, overall weight: 36,000 kg, empty load weight: 6,943 kg, maximum load weight: 29,057 kg, axle configuration: 3 axles, loading space length: 8,480 mm, loading space width: 2,354 mm, loading space height: 1,860 mm, loading space volume: 37 m³, first registration: 10/2020, next inspection (TÜV): 10/2026, suspension: air, tire size: 385/65 R22,5, Year of construction: 2020, Equipment: ABS, Unladen weight: 6,943 kg, permissible total weight: 36,000 kg, cargo space (L W H): 8,480 mm x 2,354 mm x 1,860 mm. Tire size: 385/65 R22.5, cargo volume: 37 m³. 1st axle: , 2nd axle: , 3rd axle: , air suspension, folding underrun protection, front lift axle, electronic braking system (EBS), pivoting tailgate (overlapping), low-pressure hydraulic cylinder, connection plugs 1x15 and 2x7 pole, anti-spray, light alloy rims. Our complete vehicle range can be found at . Looking for financing? With our Value Added Services, we offer you individual financing options, full service, and telematics solutions. We are happy to advise you. Ibjdpfx Aasxpkv Sjcec

Condition: new, overall weight: 32,000 kg, empty load weight: 9,100 kg, maximum load weight: 22,853 kg, axle configuration: 2 axles, loading space length: 11,043 mm, loading space width: 2,490 mm, loading space height: 2,350 mm, loading space volume: 64 m³, suspension: air, tire size: 385/65 R22,5, Year of construction: 2025, Equipment: ABS, tail-lift, Unladen weight: 9,100 kg, permissible total weight: 32,000 kg, cargo space (L x W x H): 11,043 mm x 2,490 mm x 2,350 mm. Tire size: 385/65 R22.5, cargo volume: 64 m³. 1st axle: , 2nd axle: , air suspension, underride guard, lift axle, standing aluminium tail lift: BÄR tail lift type BC 2500 S4 24V with EC underride system lan50VL 2410 mm high, central lubrication: BEKAMAX for forced steering and tail lift, electronic braking system (EBS), toolbox, forced steering, temperature recorder, connection sockets 1x15 and 2x7 pole, anti-spray, telematics system, dynamic ramp protection (DRP), multifunctional floor. You can find our complete vehicle range at . Interested in financing? With our Value Added Service we offer you tailored financing options, full service and telematics solutions. We are happy to advise you. Iodsxpkv Eepfx Aacebc

Condition: used, overall weight: 36,000 kg, empty load weight: 8,752 kg, axle configuration: 3 axles, loading space length: 13,403 mm, loading space width: 2,490 mm, loading space height: 2,800 mm, loading space volume: 93 m³, first registration: 11/2020, next inspection (TÜV): 01/2026, suspension: air, color: orange, tire size: 455/40 R22,5, Year of construction: 2020, Equipment: ABS, Unladen weight: 8752kg, gross vehicle weight rating: 36000kg, load compartment (L W H): 13,403 mm x 2,490 mm x 2,800 mm, tire size: 455/40 R22.5, load compartment volume: 93 m³, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Underride protection, Electronic braking system EBS, Tool box, Chassis bolted, Temperature recorder, Double-decker EURO pallet with beam, Hubodometer, Connectors 1x15 and 2x7 poles, Antispray, International customs lock, Telematics system, Multifunctional floor, You can find our entire range of vehicles at . Would you like financing? With our Value Added Service we offer you individual financing options, full service and telematics services. We will be happy to advise you. Ijdpfx Asxpkvxsacsbc

Condition: ready for operation (used), Year of construction: 2014, Main Drive Spindle speed range 15000 Spindle motor power 16 kW Movement X-Axis Movement 450 mm Y-Axis Movement 400 mm Z-Axis Movement 400 mm Table Outer length 770 mm Ibsdpfoxpkvrjx Aacjc Outer width 410 mm Tools Slots in storage 24 This SPINNER VC 450 Vertical Machining center was manufactured in the year 2014 in Germany. The machine has a spindle speed of 15000 rpm and a spindle motor power of 16 kW. Application Types Milling

Year of construction: 2011, condition: ready for operation (used), Main Drive Number of axis 2 Iodpfjxpkvlsx Aacjbc Additional Equipment Motorized bar passage with counter-spindle Complete with accessories and LNS bar loader This DOOSAN PUMA 2100MS was manufactured in 2011. It features a 65 mm motorized bar passage and a counter-spindle, complete with accessories and an LNS bar loader. Ideal for precision horizontal turning operations. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2011, Additional Equipment Joint trimming unit Gluing unit Snipping unit Pre-milling unit Shaping trimming unit Profile scraper blades Surface scraper blades Buffing unit Grooving unit This BRANDT KDF 890 2CU edgebander was manufactured in 2011. It features a joint trimming unit, gluing unit, snipping unit, pre-milling unit, shaping trimming unit, profile scraper blades, surface scraper blades, buffing unit, and grooving unit. Consider the opportunity to buy this BRANDT KDF 890 2CU edgebander. Contact us for more information. Application Types Edge Banding Ijdpfx Aaoxpkvfocjbc

Condition: ready for operation (used), Year of construction: 2011, General Data Machine weight 18000 kg Control Unit Ibsdpfexpku Uox Aacjc Brand FANUC Model Series 30i-MODEL B Main Drive Spindle speed range 12000 rpm Spindle motor power 26 kW (continuous) / 30 kW (30 min) Tool taper NST No. 50 Number of axis 4 Movement X-Axis Rapid Traverse 60 m/min Y-Axis Rapid Traverse 60 m/min Z-Axis Rapid Traverse 60 m/min Table Table load 800 kg Tools Max weight 30 kg Max tool diameter 125 mm Max tool length 500 mm Media Chip conveyor Yes Additional Equipment Chip Conveyor: Included 50 Bar High Pressure Coolant Through Spindle Glass Scales on X, Y, Z Axes Glass Scale on B Axis (Rotary Table) This 4-axis Kitamura Mycenter-HX500iTGA was manufactured in 2011. It features a robust 500×500mm table, capable of handling loads up to 800kg, and a high-speed spindle at 12,000 rpm. The machine includes a 200-tool magazine, dual pallet changer, and advanced FANUC Series 30i Model B CNC. Ideal for precision machining with its extensive Y, Z, and X travels. Contact us for more information about this machine. Application Types Milling

Year of construction: 2007, condition: ready for operation (used), This PANHANS POLYPAN 47 F panel saw was manufactured in 2007. It features a cutting length and width of 4200 mm, main saw blade diameter of 350 mm, and a main saw motor power of 11 kW. The saw carriage offers variable feed speeds up to 80 m/min. Ideal for precise, large-scale panel dividing. Contact us for more information about this machine. Ijdpoxpku Iofx Aacsbc Application Types Sawing (Wood)

Year of construction: 2019, condition: ready for operation (used), This DEMAG Systec 210/580-840 was manufactured in 2019. It's a hydraulic injection moulding machine with a clamping force of 210 tons and a power output of 60 kW. It has been used for 31,132 operating hours. Consider the opportunity to buy this DEMAG Systec 210/580-840 hydraulic injection moulding machine. Contact us for more information. Application Types Ibedpfx Ajxpkuzeacjc Injection Moulding

Condition: ready for operation (used), Year of construction: 2019, operating hours: 24,887 h, Main Drive Number of axis 5 Movement X-Axis Movement 762 mm Y-Axis Movement 508 mm Z-Axis Movement 508 mm Media Chip conveyor Yes Additional Equipment Cooling through the spindle: 69 bar Chip conveyor Excl Robot cell (only available for an extra amount) Exhaust unit SK-40 Iedpfexpkuuox Aacebc This 5-axis HAAS UMC-750SS was manufactured in 2019. It features a spindle speed of 15,000 RPM, movements of 762 x 508 x 508 mm, and a 40+1 position tool changer. Additional highlights include cooling through the spindle at 69 bar, a chip conveyor, and an SK-40 taper. Consider the opportunity to buy this HAAS UMC-750SS universal machining centre. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2018, This RETHINK sawyer robot was manufactured in 2018. It features a maximum reach of 1260 mm and a gantry reach of 900 mm, with a typical tool speed of 1.5 m/s and a payload capacity of 4 kg. Ideal for a variety of automation tasks, the sawyer robot we have for sale offers advanced flexibility. Contact us for further details regarding this robot. Application Types Ijdpfxoxpkune Aacjbc Robotics

Condition: ready for operation (used), Year of construction: 2008, operating hours: 55,106 h, Control Unit Brand SIEMENS Model 840D Main Drive Spindle motor power 26 kW Tool taper SK 50 Movement X-Axis Movement 5000 Y-Axis Movement 800 Z-Axis Movement 600 Isdpfx Asxpkuheacebc Additional Equipment Number of tools: 52 This 5-axis Unisign UNIVERS 6 was manufactured in 2008. Ideal for complex geometries, this vertical machining centre enhances precision in diverse machining tasks. Consider the opportunity to buy this Unisign UNIVERS 6 vertical machining centre. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2007, operating hours: 14,900 h, Control Unit Brand HEIDENHAIN Model TNC530 Main Drive Number of axis 3 Iodpfx Asxpkubsacjbc Movement X-Axis Movement 2500 mm Y-Axis Movement 1000 mm Z-Axis Movement 1000 mm Table Table load 6000 kg This 3-axis ANAYAK Performer 2500 was manufactured in 2007. It features a Heidenhain TNC530 control unit, a versatile EMENA-VAR-3 milling head, and a robust table size of 2700 x 850 mm. Capable of handling a table load up to 6 tons, with traverse paths of 2500 mm in X, 1000 mm in Y, and 1100 mm in Z. If you are looking to get high-quality milling capabilities consider the ANAYAK Performer 2500 machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2014, operating hours: 6,500 h, General Data Measurements width 1800 mm Measurements depth 2200 mm Measurements height 2200 mm Machine weight 5000 kg Control Unit Brand BROTHER Main Drive Spindle speed range 10000 Number of axis 4 Movement X-Axis Movement 700 mm Y-Axis Movement 400 mm Z-Axis Movement 350 mm Table Table load 250 kg This 4-axis Brother Speedio S700X1 was manufactured in 2014. It features a robust table size of 700 x 400 mm and a maximum table load of 250 kg. Equipped with a high-speed spindle up to 10,000 rpm and a 15 kW motor, it supports a tool magazine with 24 tools. Ideal for precise and efficient machining. Contact us for more information about this machine. Ibodpfxexpkt Re Aacjc Application Types Milling

Condition: ready for operation (used), Year of construction: 2005, operating hours: 42,339 h, Main Drive Number of axis 3 Media Chip conveyor Yes Internal cooling Yes This 3-axis DMG DECKEL MAHO DMU 60 monoBlock was manufactured in 2005. It features a chip conveyor and a coolant system, ideal for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMU 60 monoBlock machine we have for sale. Contact us for more information. Ibodjxpkt Dspfx Aacjc Application Types Milling

Year of construction: 1998, condition: ready for operation (used), Control Unit Brand Okuma Model OSP 7000L Ibsdpfx Aasxpktwocjc Turret Number of turrets 1 Tool taper VDI40 Media Chip conveyor Yes Additional Equipment Robot interface In-process measuring Bar feed HYDRO-SAMECA QS 7.52 with diameter reduction tubes: 53, 46, 40, 34, 27, 22, 17 mm SAMECA bar feeder QUICKSAM 7.52 complete with a basic unit Max. Capacity 52 mm, length 3100 mm, Total length 4900 mm Drum with guide tubes capacities: 16, 20, 26, 32, 38, 45, 52 mm Hydraulic unit Capacity 80 liters With tailstock This Okuma LB15II was manufactured in 1998. It features a 12-position VDI40 turret, chip conveyor, OKUMA OSP 7000L control, and a SAMECA bar feeder. Additionally, it includes a robot interface, in-process measuring, and a programmable workpiece chute. If you are looking to get high-quality turning capabilities, consider the Okuma LB15II machine we have for sale. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2019, operating hours: 17,526 h, Control Unit Brand HEIDENHAIN Model TNC 640 Main Drive Number of axis 5 This 5-axis Quaser MV 184P/12B was manufactured in 2019 and features a Heidenhain TNC640 control, a belt-driven main spindle with SK40 type, and a Lehmann rotary table. It includes a temperature-controlled cooling system, internal coolant supply with filtration, and a drum filter for advanced chip disposal. The machine base is made of heavily ribbed cast iron, ensuring stability and precision. Consider the opportunity to buy this Quaser MV 184P/12B vertical machining centre. Contact us for more information about this machine. Ibodpfx Aaexpktqocsc Application Types Milling

Condition: ready for operation (used), Year of construction: 2011, General Data Machine weight 6500 kg Control Unit Brand FANUC Main Drive Iodpfsxpktksx Aacjbc Number of axis 3 Movement X-Axis Movement 1020 mm Y-Axis Movement 540 mm Z-Axis Movement 510 mm Additional Equipment Through-spindle cooling Preparation for 4th axis External cooling unit This 3-axis DOOSAN DNM 500 was manufactured in 2011. It features a robust table size of 1200 × 540 mm and axis travels of 1020 × 540 × 510 mm. Equipped with through-spindle cooling and preparation for a 4th axis, it offers enhanced machining capabilities. Consider the opportunity to buy this DOOSAN DNM 500 vertical machining centre. Contact us for more information. Application Types Milling