Printing House "Kopa"

Condition: excellent (used), (for processing large plates) Nlodpfxoz Eaa Nj Ac Aeg Equipment / Additional information: The plates are fixed to the table using a vacuum.

Condition: excellent (used), machine/vehicle number: 011001, Untrimmed Book Size: Max. Spine Length 350 x Fore-edge Length 320 mm Limitation: The maximum length from the center to top or bottom is 175 mm Min. Spine Length 148 x Fore-edge Length 105 mm Nedoz D U Hnepfx Ac Aelg Limitation: The minimum length from the center to top or bottom is 74 mm Finished Book Size: Max. Spine Length 340 x Fore-edge Length 300 mm Limitation: The maximum length from the center to top or bottom is 170 mm Min. Spine Length 145 x Fore-edge Length 101.6 mm Limitation: The minimum length from the center to top or bottom is 72.5 mm Trim Width: Fore-edge: Max. 110 mm / Min. 1 mm Top and bottom: Max. 80 mm / Min. 1 mm Trim Height: 1 to 65 mm Book Weight: Transport Speed Level 7: 2.8 kg or less Transport Speed Level 6: 4.0 kg or less Transport Speed Level 5: 5.2 kg or less Height of Entrance Section Pusher: 56 mm Clamp System and Pressure: Servo Motor 2 kN to 8kN Production Speed: 400 to 1,000 cycles per hour

Year of construction: 2005, condition: used, Rachner Pile Turner All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price. Nlodsz D Dwiepfx Ac Asg

Year of construction: 2008, condition: used, Dust jacketing machine Kolbus SU 631 Year: 2008 Description: - Inline production - Setup element: Solema stand-up unit - year 1999 - Infeed conveyor - Automatic jacket feeder - Scoring station - Book opening station - Case separation station - Case closing station - Delivery to the right Book stacker Theodor Attenberger Fancy Year: 2009 Description: - Compensating stacker Nedpfxoz Dgk Es Ac Aslg - Turning device - Roller table delivery on the left and right

Condition: excellent (used), EXTRACTION SYSTEM HUNKELER HKU 2000 (Compact Extraction Unit) Nedoz A Dqyopfx Ac Aelg

Year of construction: 1997, condition: used, Spiral binding machine for books, brochures, notepads, etc. Nledpfoz A Ddaox Ac Aog The machine processes both nylon-coated and galvanized wire. Wire diameter: 0.7-1.2 mm IMPORTANT NOTE!!! THE MACHINE WILL NOT BE AVAILABLE UNTIL CALENDAR WEEK 50/2026.

Year of construction: 2009, condition: used, Case maker Kolbus DA 270 Year: 2009 Description: - Digital display Nodpfx Aoz A A I Doc Aslg - Semi automatic setting - Automatic case counter - Board pre stacking conveyor - Board cutter: PS - Centre strip infeed (flexible) - Cloth feeder - Glue unit - Preheated glue tube - Viscosity control - Pressing station - Stacking delivery - Belt delivery - Pump Size range opened case (max): 670 x 390 mm Size range opened case (min): 205 x 140 mm Joint width: 4 - 15 mm Cloth width: 223 x- 708 mm Cloth height: 130 - 428 mm Board thickness: 1 - 4 mm Board width: 95 x 328 mm Board height: 140 x 390 mm Max. mechanical speed: up to 65 cycles/min Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Year of construction: 2016, condition: used, Sewing machine Muller Martini Ventura MC 200 (A371.1000) Year: 2016 Cycles: 1,5 mio (stitches) Description: - Commander with touchscreen - Automatic setting - Feeder - ASIR Automatic Signature Image Recognition: ASIR III - 4 + 4 opening possibilities Nsdpfx Aoz Atcusc Aelg - Book stacker - PIAB Max. mechanical speed: up to 200 cycles/min Maximum size range: 510 x 320 mm Minimum size range: 120 x 75 mm Number of stitches: 13 Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand finishing machine, the “Canon Multifunction Pro Puncher B1” Item for sale: 1 x Canon Multifunction Pro Puncher B1 Condition: This is a second-hand machine, which may show signs of wear (minor scratches or discolouration). The device has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sturdy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. Nsdpfez Aqy Rox Ac Aolg For further information, please feel free to contact us directly.

Condition: used, Elektrischer Eckenrunder / Electric Corner Rounder Pescha EK 100 Nljdpfxozz A N Uj Ac Ajg Elektrischer Eckenrunder / Electric Corner Rounder Pescha EK 100 mit 3 Werkzeugen / with 3 Set of Blades Serial-No. 202 076 Geschwindigkeit / Speed max. 50 cycles/min Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: ready for operation (used), functionality: fully functional, overall weight: 28 kg, Description Tabletop banding machine (bundling machine) Nlsdpjzz Alvofx Ac Aeg Band/roll width: 30 mm Material: Paper from 70 g/m² or film from 80 µ (duplex film) Closure: Heat sealing Frame size: 240 × 170 mm (W x H) Product size: Min.: 30 × 5 mm / Max.: 235 × 170 mm Output: approx. 26 cycles per minute Tension force: continuously adjustable (from soft to very tight) Power supply: 230 V / 50 Hz Machine dimensions: approx. 425 × 400 × 287 mm (W x H x D) Weight: approx. 28 kg

Year of construction: 2025, condition: used, Year: 2025 Condition: Excellent Technical specifications: - Print width: 66 mm - Maximum book height: 350 mm - Printheads: EPSON i3200 - Print resolution: up to 1200 dpi - Printing speed: 0–40 m/min - Ink type: Water-based ink - Supported print data formats: JPG, PDF, PSD, BMP, TIFF, GIF, TGA, EPS - Supported operating systems: Windows 7, Windows 10, Windows 11 - Power consumption: 480 W - Power supply: 1-phase, 240 V, 50 Hz - Dimensions (L × W × H): 190 × 120 × 165 cm - Weight: 400 kg - ROBOJET is a printing machine designed for single-side printing on the edges of finished books. The machine features very simple and user-friendly setup. The printhead position and book transport path are adjusted automatically according to the book format. Books are transported through the machine by means of guide and transport belts. Loading and unloading of the books is performed manually. The machine is equipped with 2 EPSON i3200 printheads, offering a maximum print resolution of 1200 dpi and a print width of 66 mm. Njdpfx Aszzynbsc Aslg The machine achieves a production capacity of approximately 200–300 books per hour when printing on three book edges.

Condition: new, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, total width: 799 mm, total length: 1,857 mm, total height: 1,144 mm, overall weight: 212 kg, Machine function and use The FULLMATIC 36 varnishing machine is used for full-scale varnishing of paper sheets. It is equipped with a table for manual feeding the sheets of paper through varnishing module and vacuum conveyor of varnished sheets. On the end of machine is located fixed unloading table. Simple controls of machine allows to continuous regulation of varnishing speed. Varnished sheet of paper is after hardening of varnish using UV radiator fed on unloading table. TECHNICAL PARAMETERS Input and output material Specification of paper: Max. paper format: 360 x 720 mm Min. paper format= Manual Feeding: 150 x 200 mm Min. paper format= Automatic Feeder B3: 200 x 340 mm Paper weight: 115-350 g/m2 Specification of varnish: Types of usable varnishes: UV viscosity 30-65s (DIN 4mm flow cup viscosimeter) Application quantity 4-15 g/m2 Machine parameters Floor area: 0,8 x 1,9 m Output parameters Power - Manual sheets loading: 5-20 m/min - Automatic sheets Feeder B3: 5-15 m/min - varnishing speed=UV varnish: 5-20 m/min - varnishing speed=Water varnish: 5-8 m/min Varnish temperature: min 20°C The maximum varnishing speed is dependent on substrate and varnish specifications, ambient temperature, UV lamp power and varnish curing time. Electrical circuit Power consumption 5,5 kVA Machine voltage (basic variant): EU 3xNPE 400/230V 50Hz Control voltage of machine: 24 VDC Rated current: 10 A Recommended value of protection: C 16 A Lead-in cable: 5G 2,5mm² Cu , 5 m Pneumatic circut Pressure pneumatic circuit: 0,6 MPa; Max. 81 l/min (50 l/min) Recommended connection: Polyurethan (polyamide) tube ø8 mm Pneumatic circuit of the feeder: over-pressure +0,6 Bar Control system The control unit for operating and controlling the machine is developed in Komfi Operation conditions The machine is intended for smooth run under temperature conditions ranging from 15 C to 40 C (59°F to 104°F). The acceptable relative air humidity level is from 20  to 80 , Nodpfx Aezzk R Tsc Ajlg non-condensing relative humidity. The machine allocation should not be higher than 1000 m above the sea level. It is not allowed to place the machine into explosive or dusty environment. Working mode The machine is intended for average monthly capacity according to technical specification.

Condition: used, Format: 240 x 325 mm Equipment: Maximum Booklet Size: 240 x 325 mm (approx. 9.4 Zoll x 12.8 Zoll) Minimum Booklet Size: 100 x 120 mm (approx. 3.9 Zoll x 4.7 Zoll) Supported Formats: Covers standard finished sizes from A6 up to A4 Landscape. Paper Weights: Handles stock ranging from 60 gsm up to 300 gsm. Capacity: Squashes booklets from approx. 6 to 22 sheets (of 80 gsm paper). This creates a squareback look for booklets up to 88 pages. 4 Operational Modes Modes 1???3: Different pressing strengths (light, medium, heavy) tailored to the booklet's thickness. Bypass Mode: Booklets pass straight through without being pressed (ideal for very thin booklets under 5 sheets) Production Speed: Up to 1,800 booklets per hour. The speed remains consistent for both A5 and A4 formats. Nodpfx Acozy D Icj Aelg Sensor-Controlled Output: An integrated Zollstacker full Zoll sensor automatically pauses operation after 20 to 30 collected booklets (depending on thickness) to prevent paper jams.

Condition: used, Year of construction: 1988, Aida 76 folder-gluer 3/4 points Hot melt Very good working condition Nsdezyu Uajpfx Ac Aelg

Condition: like new (used), functionality: fully functional, A very nice slitting and creasing machine is for sale. Brand: Duplo, model DC 615, with belt suction, 220 volts. Features a USB connector and LCD screen. You are welcome to test this machine at our location. We can arrange transport and packaging for you and load it into a truck or container. Nlodpezyak Tefx Ac Ajg Please inquire for a price including transport (within the Netherlands). Best regards, Henk Hoos

Year of construction: 2004, condition: used, Dust jacketing machine VBF / Müller Martini Vesta Year: 2004 The jacketing machine completes the external appearance of the books by precisely and tightly wrapping the jackets and folding in the flaps. Description: - Setup element: ANE - Infeed conveyor - Automatic jacket feeder - Scoring station - Book opening station Nlsdpfxozxzt Tj Ac Asg - Case separation station - Case closing station - Straight delivery - Lay down device: NE (2006) - Excluding pump Max. mechanical speed: up to 3.900 cycles/h Book block format (max): 305 x 390 x 80 mm Book block format (min): 95 x 125 x 10 mm Book thickness (min): 8 mm Jacket size (max): 900 x 390 mm Jacket size (min): 295 x 125 mm Flap width (max): 150 mm Flap width (min): 50 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Year of construction: 2007, condition: used, Dust jacketing machine Müller Martini Vesta (A710) Year: 2007 The jacketing machine completes the external appearance of the books by precisely and tightly wrapping the jackets and folding in the flaps. Description: Nedpjzxztyjfx Ac Aolg - Infeed conveyor - Automatic jacket feeder - Scoring station - Book opening station - Case separation station - Case closing station - Straight delivery - Lay down device: A 440 NE - Excluding pump Max. mechanical speed: up to 3.900 cycles/h Book block format (max): 305 x 390 x 80 mm Book block format (min): 95 x 125 x 10 mm Book thickness (min): 8 mm Jacket size (max): 900 x 390 mm Jacket size (min): 295 x 125 mm Flap width (max): 150 mm Flap width (min): 50 mm

Condition: good (used), IML DA 900 Rigid Box Automatic Wrapping Machine This machine is practically new. Year of manufacture: 2016. Njdpjzw Ty Nefx Ac Ajlg Application: Wrapping veneer on a box. Made in Italy. This automated machine is designed for forming solid board boxes by wrapping veneer on a solid board box. This is the latest version of the machine, with a PLC controller. Technical specifications: Max size: 430mm x 350mm x 120mm Min size: 60mm x 60mm x 10mm Version thickness: 100-175gsm Weight: 900kg Power supply: 230V The set includes two tool palettes for producing standard boxes. The molds are primarily made using 3D printing technology.

Year of construction: 2017, condition: used, offer consists of: short delivery unit SC-200 - weight: 18kg We can also organize the following for you: Njdpszwlzlofx Ac Aolg packaging, loading, transport ( by ship or plane) including customs

Condition: used, Year of construction: 1971, The Heidelberg GTP is a high-performance hot foil stamping press, currently operational in a printshop in Germany. Designed for precision and versatility, this machine handles a wide range of applications, from luxury packaging to security printing. With a maximum sheet size of 340 x 460 mm and a minimum of 85 x 102 mm, the GTP accommodates diverse project requirements. It operates at speeds between 1,500 and 4,000 sheets per hour, delivering both efficiency and flexibility. The press features a punching pressure of 60 tons, ensuring crisp, high-quality foil application on various substrates. Weighing approximately 2,250 kg and with compact dimensions of 2.08 x 1.48 x 2.10 meters, the GTP is built for stability and ease of integration into existing workflows. The machine comes complete with all necessary tools, accessories, and a sturdy frame, making it a turnkey solution for any finishing department. Format: 340 x 460 mm Equipment: Hot Foil Stamping Tiegel Heidelberg GTP Size min. 85 x 102mm Size max. 340 x 460mm Nlodpfx Acozwf Ufo Aog Speed min. min. 1.500sph - max. 4.000sph Punching pressure 60T Weight approx. 2250kg Dimensions 2,08 x 1,48 x 2,10m Complete with tools and accessories include frame

Year of construction: 1999, condition: used, Embossing machine Kolbus PE 312 Year: 1999 - Case pre-stacking conveyor Nlsdpfszvd U Isx Ac Asg - Feeder for cases - Case bending station: DBA - Foil transporting device - Case set up outside machine - Matrix plate 2 - Counter stacker

Condition: used, Year of construction: 2006, Format: 450 x 350 mm Nljdpozu Spwefx Ac Asg

Condition: used, Zusammentragmaschine / Broschürenfertigung MC-80a MC-80m SPF-11 FC-11 Booklet Maker / Brochure Finishing MC-80a MC-80m SPF-11 FC-11 Nedpszu Dm Usfx Ac Aolg Zusammentragmaschine / Broschürenfertigung MC-80a MC-80m SPF-11 FC-11 Booklet Maker / Brochure Finishing MC-80a MC-80m SPF-11 FC-11 Anlage besteht aus / Booklet Maker consist of: Zusammentragmaschine / Air Suction Collator MC-80a MC-80m - 2 x 8 Stations Feeder Baujahr / Year 1998 - Serial-No. 042016 Format / Size min. 110 x 160mm - max. 318 x 470mm Grammatur / Paper weight 50-260g/qm Stapelhöhe / Infeed height Station 50mm Geschwindigkeit / Speed 5.100 Product/h Broschürenfertigung / Booklet Maker SPF-11 - FC-11 Baujahr / Year 1998 - Serial-No. 128032 Heften-Falzen-Schneiden / Stitching-Folding-Trimmer Unit 2 Universalheftköpfen / 2 Stitching heads Hohner 48/5S Kompressor / Compressor Rietschle Auslage / Delivery - Rüttler / Jogger PJ-77 Geschwindigkeit / Speed 1.500 - 3600 Sets/h Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 2019, condition: excellent (used), functionality: fully functional, machine/vehicle number: 2019062, Used (2019), in very good condition termo printing calender with felt. Width: 2000 mm. Reliable Italian quality. Ideal for sublimation and textile finishing. Clean, properly maintained and fully functional. CHARACTERISTICS OF PRINTING CYLINDER: Diameter : 200 mm (7,87“). Width : 2.000 mm (78,74“). Working width: / 1.800 mm (70,87”) TECHNICAL DATA: Installed power: 14 kw/h Average electric consumption: 9 kw/h Compressed air pressure: 3-8 bar Mechanic speed: 0.1 - 1.7 m/min Overall dimensions: width 3.110 mm (122,44“). length 1.250 mm (49,21“) height 1.650 mm (64,96”). Nedjzuy Rvopfx Ac Aelg Net weight: 950 kg Machine produced according to CE rules TENSION CONTROLS: Tension control for printing material: Entry: brake with manual adjustment and manual textile tensioner Exit: tangential winding on felt Tension control for printing paper: Entry: disk brake with pneumatic adjustment. Exit: winding with pneumatic device Tension control for protection paper: Entry: disk brake with pneumatic adjustment. Exit: tangential winding on felt Single motor NOMEX felt with manual tension adjustment system and automatic felt-centring device Incorporated system of felt protection in case of black out and/or compressed air lack