FFT Mexico

Condition: ready for operation (used), Year of construction: 2019, spindle speed (max.): 12,000 rpm, travel distance X-axis: 3,500 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 800 mm, table length: 4,000 mm, number of axes: 5, This 5-axis DOOSAN VCF850 was manufactured in 2019. It features a substantial X-axis travel of 3500 mm, Y-axis travel of 950 mm, and Z-axis travel of 800 mm. The machine operates at a maximum rotational speed of 12000 rpm and includes a BT40 tool holder type. If you are looking to get high-quality milling and turning capabilities, consider the DOOSAN VCF850 mill-turn centre we have for sale. Contact us for further details. • Operating hours: 4,500 h • Functionality: Fully functional Nwsdpszw D Rxofx Aarok • Capability: Continuous 5-axis operation Additional equipment • Rotary table Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2004, spindle speed (max.): 5,000 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, total width: 2,100 mm, overall weight: 9,200 kg, product length (max.): 3,850 mm, number of slots in tool magazine: 40, number of axes: 5, This 5-axis Mazak INTEGREX 200-3 was manufactured in 2004. It features a maximum turning diameter of 660 mm and a maximum turning length of 1045 mm. The machine is equipped with a main spindle speed of 5000 rpm and a milling spindle speed of up to 12000 rpm. If you are looking to get high-quality mill-turn capabilities, consider the Mazak INTEGREX 200-3 machine we have for sale. Contact us for further details. Nwsdpfxezwx Acj Aarjk - Maximum Turning Diameter: 540-660 mm- Maximum Swing Diameter Over Bed: 660 mm- Maximum Turning Length: 1016-1045 mm- Main Spindle Speed: 35-5000 rpm- Milling Spindle Speed: up to 12000 rpm- Tool Holder: Capto C6- Machine Height: 2597 mm- Main Circuit Voltage: 3AC 400V 50/60Hz- Control Circuit Voltage: AC 100V / DC 24V- Main Motor Current: Max 84 A (400 V)- Rated Capacity: 50.0 kVA- Oil Cooling Unit Model: Daikin (Weight 190 kg)- Cooling Unit Capacity: Comp. 1.1 kW, Circulating Pump P1 0.4 kW, Circulating Pump P2 0.4 kW- Refrigerant: R407C (0.83 kg)

Condition: ready for operation (used), Year of construction: 1999, Available immediately from our location: 5-axis CNC turning and milling center WFL, Voest, Alpine, Steinel Type WFL M 30 – G Year of manufacture 1999 Siemens Sinumerik 840 C Nwsdpfezwugkex Aarok Turning length 1050 mm Diameter over slide 440 mm Turning spindle on the right Turning spindle on the left Main drive 37 kW Spindle speeds 10 – 5000 rpm Cross slide Counter spindle housing on the right Cross slide on the right Turning, boring, and milling unit IKZ (internal coolant) 90 bar Tool magazine with 96 positions Disc turret on the right, 2 x 12 positions C-axis on the left and right Hydraulic chuck on the left and right Chip conveyor Weight with accessories 12 tons Price: EUR 38,000.— plus VAT, ex works.

Condition: used, functionality: fully functional, Mortising machine Make: CMZ Type: 200 Gooseneck depth: 650 mm Nodpozwt Tpsfx Aarswk Table diameter: 220 mm

Condition: good (used), Year of construction: 2008, MAZAK QUICK TURN NEXUS 350-II MY x 1500 Max. swing diameter: 750 mm Max. turning diameter: 420 mm Max. turning length: 1,538 mm Max. milling speed: 4,500 rpm Max. spindle speed: 3,300 rpm The machine is equipped with: - CNC control Mazatrol Matrix - KITAGAWA 3-jaw chuck B-212, diameter 304 mm - Main spindle with bar capacity of 102 mm!!! - Tool Eye Njdpfx Aaszwqm Tjrjwk - C-axis - NC tailstock - Reinforced coolant pump - Chip conveyor - 8 pcs. fixed tool holders - 2 pcs. driven tool holders

Condition: used, CNC Turning and Machining Cente: Gildemeister/DMG Mori CTX2500/700 Nsdpjzwn Sgjfx Aarswk Year: 2019 Serial No.: 02620000651 2 driven spindles, rated speed 4,000/5,000 rpm, net weight 6,360 kg, accumulated operating hours 44,087 h, spindle hours: 27,832 h, cooling unit, chip conveyor, coolant treatment system, control system model: Ergoline, tool turret, 14 positions, for driven tools

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: LNR-1043, turning length: 1,130 mm, turning diameter: 550 mm, spindle bore: 102 mm, spindle speed (max.): 2,500 rpm, travel distance X-axis: 315 mm, travel distance Z-axis: 1,150 mm, type of input current: three-phase, MACHINE INFORMATION Manufacturer: Doosan Model: S550L Year: 2006 Condition: (Used) Good Serial Number: LNR-1043 Control: Fanuc Control Nodpszwnbnefx Aarswk Accessories: Tool Eye, Swarf Conveyor, 3 & 4 Jaw Chuck MACHINE SPECIFICATIONS Control: Fanuc Control Bar Capacity: 102mm Chuck Size: 20″ 4 Jaw Chuck & 3 Jaw Chuck Distance Between Centres: 1130mm Max Cutting Diameter: 550mm Max Cutting Length: 1130mm Spindle Speed: 2500rpm Turret Positions: 12 Station Swing: 710mm X Axis Travel: 315mm Z Axis Travel: 1,150mm Price: £22,000 + VAT

Condition: good (used), Year of construction: 2017, Standard turning diameter 150mm, maximum cutting diameter 255mm, maximum cutting length 685mm , Bar capacity main spindle 51mm, Nsdpfozwm Hpex Aarjwk spindle speed 5,000rpm, sub-spindle 5,000 rpm, C axis 0.001 degrees, 3 x turrets 24 stations, Y axis +/-45mm, milling speeds 6,000 rpm, main spindle 15kw, Fanuc 31i, swarf conveyor, barfeed unit, parts catcher

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 63284-0012, turning length: 650 mm, turning diameter: 300 mm, spindle motor power: 15 W, spindle speed (max.): 5,000 rpm, spindle bore: 76 mm, travel distance X-axis: 215 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 680 mm, milling spindle length: 6,000 mm, type of input current: three-phase, bar passage: 65 mm, total height: 1,920 mm, total length: 3,130 mm, total width: 1,710 mm, spindle nose: A2-6, overall weight: 4,500 kg, Equipment: documentation/manual, MACHINE INFORMATION Manufacturer: Hyundai Model: KIA SKT2100SY Year: 2009 Condition: (Used) Great Serial Number: 63284-0012 Control: Fanuc Control Accessories: LNS Barfeed, Live & Static Tool holders, Swarf Conveyor, Parts Catcher, Tool Probe. Location: COVENTRY, UNITED KINGDOM MACHINE SPECIFICATIONS Njdpfjzwhp Sjx Aarjwk Control: Fanuc Control Bar Capacity: 65mm Chuck Size: 8″ Main, 6″ Sub Max Cutting Diameter: 300mm Max Cutting Length: 650mm Spindle Speed: 5000rpm Turret Positions: 12 Milling Speed: 6,000rpm Swing: 820mm X Axis Travel: 215mm Y Axis Travel: 110mm total (+55mm) Z Axis Travel: 680mm C Axis Travel: 0.001 degree

Condition: good (used), Year of construction: 2010, functionality: fully functional, Fanuc control, spindle bore 65mm, two turrets, Y-axis, Nsdpfx Aajzwhhherswk counter spindle, powered tools, chip conveyor, short bar magazine, accessories.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, MAIN INFORMATION Capacity and Working Area • Model: Mazak Integrex J-200 500U • Control: Mazatrol Matrix Nexus 2 • Year: 2014-05 • Serial No.: 255239 • Cutting time: 8,867 hours • Network: LAN connection • Condition: The machine is in very good technical condition with extremely high precision. • Max. turning diameter: 530 mm • Max. turning length: 500 mm • Bar capacity: 65 mm • Spindle bore: 76 mm Axis Travels • X-axis: 450 mm • Y-axis: 200 mm • Z-axis: 550 mm Spindles and Axes Main Spindle • Speed: 5,000 rpm • Power: 15 kW (increased power) • C-axis: 360° with 0.001° indexing Milling Spindle • Speed: 12,000 rpm • Tool holder: Capto C6 • Through-spindle coolant (liquid/air) B-axis • Angular range: -30° to -190° • Full indexing Tooling, Magazine and Additional Equipment • Tool magazine: 72 positions • Tailstock: MT5 Auto • Chuck: Hainbuch Ø65 collet chuck • Tool measurement: Yes (measuring arm) • Parts catcher: Yes • Chip conveyor: Mayfran • High-pressure pump: 15 bar • Bar feeder: Irco ILS-MUK-7012 Machine Condition and History • The machine is fully operational and functions as it should. • No alarms or critical faults. • Smooth movement on all axes. • Spindles run smoothly without vibration. • Linear guides and ball screws are in good condition. • Hydraulic and pneumatic systems operate normally. • Regular in-house servicing. • Lubrication system OK. • The machine is clean and well maintained. Included Documentation • Photos of the machine • Video of the machine in operation • Screenshot of service history • Electrical diagrams on CD • Manuals on CD Machine Strengths • Multitasking machine with both turning and milling capabilities • Full 5-axis interpolation (C + B) • Capto C6 milling spindle with 12,000 rpm • Large machining capacity: 530 mm diameter / 500 mm length • 72 tool positions – rare and highly attractive • Through-spindle coolant (liquid/air) • Integrated robot interface (Smartshift BASE) Nedszwhdvspfx Aarewk • Irco bar feeder • Hainbuch collet chuck

Condition: excellent (used), Year of construction: 2004, MAIN INFORMATION Capacity and Working Area • Model: Mazak Integrex 200 MkIII Nwjdpfxjzwhdce Aarsk • Control: Mazatrol PC Fusion 640 MT Pro • Year: 2004–06 • Serial No.: 169996 • Network: LAN connection • Condition: The machine is in very good technical condition and has been very well maintained. • Mainly used for machining aluminium and plastic. • Max. turning diameter: 530 mm • Max. turning length: 1,000 mm • Bar capacity: 65 mm • Spindle bore: 76 mm Axis Travels • X-axis: 580 mm • Y-axis: 160 mm • Z-axis: 1,045 mm Spindles and Axes Main Spindle • Speed: 5,000 rpm • Power: 15 kW • C-axis: 360° full interpolation Milling Spindle • Speed: 12,000 rpm • Tool holder: Capto C6 • Through-spindle coolant B-axis • Angular range: -30° to -190° • Full indexing Tooling and Magazine • Tool magazine: 40 positions • Tool measuring arm: Yes • Tailstock: MT5 Auto • Chuck: Kitagawa B-210, 10-inch 3-jaw chuck • Collet chuck: SMW AUTOBLOK KSB-MB-A60 • Smartshift BASE quick coupling for robot • Parts catcher: Yes • Parts collector: Yes • Chip conveyor: Mayfran • Bar feeder: STC Super 65 Included Documentation • Photos of the machine • Video of the machine in operation • Service history (photo) • Manuals • Electrical diagrams • Complete machine manuals • Complete programming manuals • Complete maintenance manuals Machine Strengths • Multitasking machine with both turning and milling capabilities • Full 5-axis interpolation (C + B) • Capto C6 milling spindle with 12,000 rpm • Large machining capacity: 530 mm diameter / 1,000 mm length • 40 tool positions • Through-spindle coolant • Integrated robot interface (Smartshift BASE) • STC Super 65 bar feeder

Condition: excellent (used), Year of construction: 2013, MAIN INFORMATION Capacity and Working Area • Model: Mazak Quick Turn Smart 200 • Control: Mazatrol Smart • Year: 2013 • Serial No.: 249187 • Accumulated operating time: 11,755 hours • Cutting time: 1,561 hours • Network: LAN connection • Condition: The machine is in very good technical condition, clean, precise, and very well maintained. • Max. swing diameter: 530 mm • Max. swing over cross slide: 343 mm • Bar capacity: 65 mm • Spindle bore: 76 mm • Axis travels: X-axis: 195 mm Z-axis: 560 mm • Rapid traverse: X-axis: 30,000 mm/min Z-axis: 33,000 mm/min Spindle and Tooling • Spindle speed: 5,000 rpm • Spindle power: 15 kW • Selectable threading start position • Through-tool coolant • Tool turret: 12 positions Indexing time: 0.17 sec / 1 step • Tailstock: MT5 Auto • Tool measuring arm: Yes • Parts catcher: Yes • Robot interface: Additional M-function (1 pair) • Smartshift BASE quick coupling: Yes • Chuck: SMW AUTOBLOK collet chuck Automation and Additional Equipment Integrated Automation Solution with UR5e • Model: Universal Robots UR5e (demo use only) • Type: Collaborative robot (cobot) • Year: 2021/01 • Condition: Fully integrated and operational with the Mazak Smart 200 • Payload: 5 kg • Reach: 850 mm • Repeatability: ±0.03 mm • Working envelope: 2.6 m³ • Max. TCP speed: 1,000 mm/s • Joint speed: 180°/s • Robot weight: 21 kg • Mounting: Floor, ceiling, wall, or inclined • Power supply: 100–240 V AC, approx. 200 W • Controller: UR control box (e-Series) • Programming: URScript + graphical block programming • Safety: ISO 10218-1, ISO/TS 15066, PLd Cat. 3 • Fieldbus: PROFINET, EtherNet/IP, Modbus TCP • Digital I/O: 16 inputs / 16 outputs • Analog I/O: 2 inputs / 2 outputs • Tool flange: ISO 9409-1-50-4-M6 Integration with Smart 200 Nwodpfx Aaezwhc Esrsk • Smartshift BASE quick coupling • Additional M-function (robot interface) • Pre-programmed sequences • Quick changeover between manual and robot operation • Video available showing the robot and machine in operation • Fully tested and used in production Condition Description • The machine is fully operational and functions as it should. • No alarms or critical faults. • Smooth movement on all axes. • Spindle runs smoothly without vibration. • Linear guides and ball screws are in good condition. • Hydraulic and pneumatic systems operate normally. • Regular in-house servicing. • Lubrication system OK. • The machine has been used for light production (aluminium/plastic). • Robot and machine are fully integrated and tested.

Condition: used, Year of construction: 2007, turning diameter 275 mm turning length 900 mm control TRAUB TX8i-s spindle passage 65 mm spindle turning speed - stepless 1 - 5.000 U/min spindle diameter in front bearing 110 mm C-axis 1 - 500 U/min x-axis 175 mm z-axis 650/975 mm y-axis +/- 40 mm rapid traverse X/Y/Z 20 / 40 / 20 m/min feed capacity X/Y/Z 5,5 / 5,5 / 10 kN tool turret - number of stations 10 number of driven tools 10 mm toolpiece turning speed range 1 - 6.000 U/min Nwodpfx Ajzwg Ndearek power capacity at 25 % load 5,50 kW max. torque at 25% load 17,50 Nm tool taper DIN 69880 Ø30x55 spindle diameter in front bearing 110 mm total power requirement 95,00 kW weight of the machine ca. 16,00 t dimensions of the machine ca. 10,00 x 3,50 x H3,00 m

Condition: used, Year of construction: 2005, turning length: 705 mm, turning diameter: 356 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, controller model: MORI SEIKI MSX-850, TECHNICAL DETAILS Turning diameter: max. 356 mm Standard turning diameter: 275 mm Turning length: max. 705 mm Travel in X-axis: 260 mm Travel in Y-axis: ±50 mm Total travel in Y-axis: approx. 100 mm Travel in Z-axis: approx. 795 mm Rapid traverse rate X/Y/Z: 30 m/min Tool stations: 12 MACHINE DETAILS Design: SY with Y-axis Control system: MORI SEIKI MSX-850 Bar feed magazine: LNS Quick Load Servo 2 Bar length: max. approx. 1,500–1,600 mm / 63″ EQUIPMENT Tailstock Driven tools Y-axis LNS Quick Load Servo 2 bar feed magazine Nwedpfxjzwgwzo Aarok

Condition: used, Year of construction: 2006, turning length: 1,298 mm, turning diameter: 356 mm, spindle speed (max.): 4,000 rpm, controller model: MORI SEIKI MSX 850III / MAPPS III, center width: 1,250 mm, TECHNICAL DETAILS Maximum turning diameter: 1,250 mm Maximum turning length: 1,298 mm Maximum turning diameter: 356 mm Standard turning diameter: 275 mm Swinging diameter over bed: 923 mm X-axis travel: 260 mm Z-axis travel: 1,345 mm Maximum spindle speed: 4,000 rpm Spindle bore: approx. 80 mm Number of turrets: 1 Number of tool positions: 12 MACHINE DETAILS Control system: MORI SEIKI MSX 850III / MAPPS III Dimensions & Weight Dimensions (L x W x H): 5,000 × 2,300 × 2,400 mm Machine weight: 7,600 kg EQUIPMENT IRCO SIMAG loader magazine Chip conveyor Powered tools Nedpfxozwgque Aarowk C-axis Y-axis

Condition: used, Year of construction: 2003, Manufactured: July 2003 (Factory ID #2) Swing over bed: approx. 680 mm (interference with front cover: approx. 454 mm) Swing over cross slide: approx. 510 mm Distance between centers: approx. 575 mm Max. turning diameter: approx. 390 mm Standard turning diameter: approx. 250 mm Max. turning length: approx. 485 mm Bar capacity: approx. 73 mm Z-axis travel: approx. 520 mm Spindle speed range: 35-3,500 rpm Spindle nose type: JIS A2-8 Through-spindle hole diameter: approx. 86 mm Spindle bearing inner diameter: approx. 130 mm Turret: 10 tool stations (12 optional), shank height for square tools approx. 25 mm, max. boring bar shank diameter approx. 50 mm, indexing time 0.2 sec Hydraulic power chuck: Kitagawa, cylinder type B-210, S/N 1875 Tailstock travel: approx. 515 mm Tailstock spindle diameter: approx. 85 mm, taper MT5 (live center) Tailstock spindle travel: approx. 120 mm Rapid traverse rate: X 18,000 mm/min, Z 24,000 mm/min Njdpfx Ajzwf Dasarjwk Jog feedrate: X/Z 0-1,260 mm/min Spindle drive motor (30 min rating): 15/11 kW, high-output option 18.5/15 kW (as fitted per nameplate) Feed motors: X 1.0 kW, Z 3.0 kW Electrical power supply: 34 kVA (high-output specification, per nameplate; standard rating 27.4 kVA) Coolant tank capacity: approx. 205 l (front-removal option: approx. 160 l) Machine height: approx. 1,890 mm Floor space: approx. 2,380 x 1,835 mm Machine weight: approx. 4,500 kg Electrical rating (per nameplate): 3-phase, 50 Hz, 200V AC, full load current 99A, spindle motor current rating 114A, interrupting capacity 5 kA Data Accessory Tool Cabinet (Hahn & Kolb) Multi-drawer mobile tool cabinet with turning tool holders, inserts, clamping/chuck jaws and measuring instruments.

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 35001032, turning length: 40,000 mm, turning diameter: 890 mm, spindle motor power: 69,000 W, spindle speed (min.): 1 rpm, spindle speed (max.): 1,800 rpm, spindle bore: 122 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 260 mm, type of input current: three-phase, quill stroke: 140 mm, quill diameter: 120 mm, quill travel distance: 3,958 mm, spindle nose: A15, overall weight: 25,500 kg, spindle diameter: 200 mm, feed force X-axis: 10,000 N, feed force Z-axis: 22,000 N, distance between centers: 4,000 mm, Equipment: documentation/manual, For sale is a Heyligenstaedt Heynuflex turning and milling center, which is currently still in production. The machine is in operational condition and can be inspected under power and in operation until September 14, 2026. Machine type: Hn35U/4000 Flex Commission number: 35001032 Year of manufacture: 1994 Working area: - Turning length: 4000 mm - Swing diameter over bed: 890 mm Main drive: - Power at 100% duty cycle: 50 kW - Power at 50% duty cycle: 69 kW Main spindle: - Spindle diameter at the front bearing: 200 mm - Spindle bore: 120 mm - Spindle head shape: Shape A DIN55026 Gr15 - Speed range: - Gear stage 1: 1 – 540 rpm - Gear stage 2: 7 – 1800 rpm Feed: - Rapid traverse speed max.: 15 m/min - Planar feed: 0.5 - 5000 mm/min - Longitudinal feed: 0.5 - 5000 mm/min Tool carrier system: Nedpfjzwb Dpex Aarjwk - Tool interface: Capto C8 - Linear travel range Y-axis: +/- 130 mm - Linear travel range X-axis: 980 mm - Tool magazine: 36 tools Tailstock: - Quill diameter/stroke: 125 mm / 140 mm - Axial force min/max: 16000/2500 N - Internal taper quill: MK 5 Control system: - Type: Siemens 880T If you are interested or would like to arrange a viewing appointment, please do not hesitate to contact us.

Condition: used, Dual-spindle Haas DS-30Y with only 742 spindle hours — Y axis, full C axes and 6,000-rpm live tooling for complete machining in one setup. Factory-fitted with the ATP tool presetter, LCC3 chip conveyor and auto jet blast on the sub-spindle. Haas DS-30Y — Year of manufacture 2023 CNC CONTROL Controller: Haas Next Generation Control (NGC) X-axis travel mm: 239 Z-axis travel mm: 826 Nedpfx Aezv T Nnjarjwk Y-axis travel mm: ± 51 Max. turning length mm: 826 Max. turning diameter mm: ø 349 Swing over bed mm: ø 533 Spindle bore / bar capacity mm: ø 88,9 / 76 Rapid traverse m/min: X/Y: 12 / Z: 24 Tool positions per turret: 12 Tool holder type (VDI / BMT / others): BMT65 Driven tools max. speed rpm: 6.000 MAIN SPINDLE Max. spindle speed rpm: 4.500 COUNTER / SUB-SPINDLE Counter spindle max. speed rpm: 4.000

Condition: used, Year of construction: 2009, turning diameter: 2,000 mm, travel distance X-axis: 1,875 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 1,345 mm, rotational speed (max.): 300 rpm, rotational speed (min.): 10 rpm, Equipment: documentation/manual, CNC Vertical Multitasking Machine CNC Control Mazatrol Matrix 2 Turning diameter 2000 mm Turning speed 10-300 R/min Milling head speed 25-5000 R/Min Movement X-Y-X-axis 1875-1550-1345 mm B-axis travel -30/120° C-axis indexing 360/0,0001° Tool taper Capto C8 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Nedpfx Aaszv T D Esrowk Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2010, operating hours: 62,569 h, functionality: fully functional, machine/vehicle number: 00410001121, spindle speed (max.): 5,000 rpm, overall weight: 5,695 kg, Equipment: documentation/manual, We are offering this used DMG CTX beta 500 V6 CNC turning and milling center, year of manufacture 2010. Nodezv Tbqopfx Aarjwk Serial number: 00410001121 Year of manufacture: 2010 Max. main spindle speed: 5000 rpm Max. counter spindle speed: 6000 rpm Weight: 5695 kg If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2011, turning diameter over cross slide: 75 mm, turning diameter: 381 mm, spindle speed (max.): 3,500 rpm, spindle bore: 75 mm, travel distance Z-axis: 850 mm, total height: 2,325 mm, total length: 4,820 mm, total width: 2,100 mm, overall weight: 8,000 kg, CNC Lathe with Y-axis, driven tools and 2nd Spindle CNC Control Fanuc series 18i-TB Turning diameter 381 mm Spindle bore diameter 75 mm Spindle speed 3500 R/min Spindle motor 22/15 Kw Movement X-axis 190 + 69,5 mm Movement Y-axis +55 / -55 mm Movement Z-axis 850 mm Movement W-axis (subspindle to mainspindle) 830 mm Min indexing C-axis main spindle 0,001 ° Number of tools on turret 12x Number of driven tools 12 x Tool Taper VDI 40 Bar feeder Irco-Breuning ILS MUK Spindle motor driven tools 4000 R/min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Nwsdpfszv Smfox Aarjk Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2008, turning diameter: 275 mm, spindle bore: 80 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,345 mm, total height: 2,232 mm, total length: 4,339 mm, total width: 2,232 mm, overall weight: 7,600 kg, Equipment: documentation/manual, CNC Lathe with Y-axis, driven tools an 2nd spindle CNC Control MSX-850-lll (mitsubishi 720 BM) Turning diameter 275 / 366 mm Spindle bore diameter 80 mm Spindle speed 4000 R/min Spindle motor 18.5/15 Kw Movement X-axis 260 mm Movement Y-axis +50 / -50 mm Movement Z-axis 1345 mm Movement W-axis (subspindle to mainspindle) 1275 mm Min indexing C-axis main spindle 0,001 ° Number of tools on turret 12x Number of driven tools 12 x Tool Taper BMT Bar feeder LNS Quick Load Servo lll Spindle motor driven tools 6000 R/min Nwsdezv Sf Uspfx Aarok If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), Year of construction: 2025, operating hours: 1,351 h, controller manufacturer: FANUC, controller model: i Series iPlus, This 6-axis DN Solutions DNX 2100S Advanced was manufactured in 2025. It features a FANUC i-Series control, a 6-axis configuration including B and C axes, and a tool magazine with 60 positions. The machine offers full turn-mill capabilities, through-spindle coolant up to 70 bar, and a Renishaw probing system. Consider the opportunity to buy this DN Solutions DNX 2100S turn-mill centre. Contact us for more information about this machine. • Axes Configuration: 6 axes (X, Y, Z, B, C1, C2) • B-axis milling spindle (indexing accuracy 0.0001°) • Milling/Main Spindle: • Tool Interface: HSK-C63 • Max Speed: 12000 rpm • Power: 18.5 / 15 kW • Max Torque: 58 Nm • B-axis Travel: 240° (±120°) Nsdpfx Aaszv Ruuorewk • Left Spindle: • Chuck Size: Ø255 mm (10") • Max Speed: 4000 rpm • Power: 22 / 15 kW • Max Torque: 456 Nm • Right (Sub) Spindle: • Chuck Size: Ø210 mm (8") • Max Speed: 5000 rpm • Power: 18.5 / 15 kW • Max Torque: 326 Nm • Tool Magazine: 60 positions • Features: Driven tools, Full turn-mill capability • Through-Spindle Coolant: 70 bar • Programmable Coolant Pressure (7 steps) • Coolant Through Opposite Spindle • Oil Skimmer • Chuck Washing • Work Area Washing: 4.5 bar • Coolant Level and Pressure Monitoring • Oil Mist Collector Preparation • Hinged Belt Chip Conveyor • Renishaw Probing System (Measuring Head Included) • Automatic Tool Measurement • Radio Tool Measurement System RMP60 • Manual Pulse Generator (MPG) • 3-Color Signal Tower • Automatic Bar Feeder: 1 meter (included) • Bar Feeder Interface Package • Parts Conveyor with Belt • Part Ejection from Sub Spindle

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, We are selling a CNC turning machine, model SL2500SY/650. Year of manufacture: 2002 Control system: MSG 805 V Software: MAPPS Spindle motor: 22 / 18.5 kW Counter-spindle motor: 11 / 7.5 kW VDI turret Chip conveyor 2-stage clamping system Interface for a bar feeder Nwjdpfx Aaszv N Nqorok Travel distances: X 305 mm Z 690 mm Y 120 mm Max. turning diameter: 490 mm Standard turning diameter: 260 mm Max. turning length: 650 mm Max. spindle speed: 4000 rpm Spindle bore: 88 mm