Dauth Kom.

Condition: excellent (used), Year of construction: 2005, operating hours: 62,289 h, functionality: fully functional, machine/vehicle number: 15035709574, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, feed rate X-axis: 18,000 m/min, nominal power (apparent): 55 kVA, controller manufacturer: Heidenhain/Mill Plus, controller model: Heidenhain/Mill Plus, workpiece length (max.): 600 mm, workpiece width (max.): 400 mm, workpiece height (max.): 520 mm, workpiece weight (max.): 600 kg, total height: 2,900 mm, total length: 2,900 mm, total width: 2,650 mm, table width: 500 mm, table length: 700 mm, table load: 600 kg, overall weight: 7,400 kg, spindle speed (min.): 18,000 rpm, spindle speed (max.): 18,000 rpm, spindle motor power: 20,000 W, number of spindles: 1, number of slots in tool magazine: 60, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, 5-axis CNC machining center Deckel Maho DMU 70 Evolution Control system: Heidenhain / Mill Plus Tool magazine: 60 tools Year of manufacture: 2005 Country of origin: Germany Iisdjzvdb Iopfx Aatjf Machine parameters: - Axis X travel: 750 mm, Axis Y travel: 600 mm, Axis Z travel: 500 mm - Axis B: 180 degrees - Axis C: +/- 360 degrees - Feed rate range: 18,000 mm/min - Rapid traverse rate: 50 m/min - Max spindle motor power: 20 kW - Tool holder: SK 40 - Work table dimensions: 700x500 mm - Work table load capacity: 600 kg - Chip conveyor - Coolant system - Complete programming manual - Technical documentation - Machine weight: approx. 7.4 tons - Machine dimensions: approx. 2,900 x 2,650 x 2,900 mm The electrospindle was replaced in 2023.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 4,225 h, travel distance X-axis: 600 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, controller manufacturer: FANUC, controller model: 0i-MF, total height: 3,570 mm, total width: 3,523 mm, overall weight: 11,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, product length (max.): 3,700 mm, number of axes: 5, This 5-axis HWACHEON D2-5AX 12k was manufactured in 2021. It features an X-axis travel of 600 mm, Y-axis travel of 550 mm, and Z-axis travel of 500 mm. The machine is equipped with a spindle speed of up to 12,000 rpm and a tool magazine capacity of 30 places. If you are looking to get high-quality machining capabilities, consider the HWACHEON D2-5AX 12k vertical machining centre we have for sale. Contact us for further details. - Control Unit: Fanuc 0i-MF with 15" Color Screen, Manual Guide i / TWP, Data Server 4 GB- Max. Feed Rates (X/Y/Z): 24,000 mm/min- Rapid Speed (X/Y/Z): 36 / 30 / 30 m/min- Rapid Speed (B/C): 25 U/min- Table Diameter: 600 mm- Max. Workpiece Weight: 500 kg- Table Height: 500 mm- T-Slots: 14x100 mm- Spindle Speed: Up to 12,000 rpm (Optionally listed 14,000 rpm 37/22 kW)- Spindle Drive Power: 37 / 18.5 kW- Spindle Torque: 250 Nm- Spindle Taper: SK-40 DIN6359 / DIN69872A- Tool Magazine Places: 30 places (Optionally 40 places)- Max. Tool Length: 300 mm- Max. Tool Diameter: 80 mm (130 mm adjacent empty)- Max. Tool Weight: 8 kg- Tool Change Time: 1.8 sec- Internal Coolant Supply (IKZ): 30 bar, 13 l/min- Coolant Tank Capacity: 250 L- Measurement Systems: Renishaw OMP40-2 tool measurement with IR transmission, Blum tool setter- Software Options: HTLD, HTDC, Optima, HAI 400 Block, Fanuc Helical Interpolation, Program Restart, HRCC- Total Electrical Power: 70 kVA- Rated Voltage: 3 / 220 V, 50 Hz- Operating Air Supply: 0.5 - 0.7 MPa- Control On Time: 16,460 h- Operating Time: 5,550 h- Machining Time: 4,225 h Isdpfezu Rqaox Aatsif Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2006, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller model: SIEMENS SINUMERIK 840D pl, rotational speed (min.): 8,000 rpm, overall weight: 4,000 kg, number of slots in tool magazine: 20, The machine is still connected to the power supply and is located near Düsseldorf. Isdpszuxiqsfx Aatoif The vises shown in the images are not included in the offer. All technical specifications are provided to the best of our knowledge, but without guarantee. Subject to prior sale and errors.

Condition: used, X-axis: 640mm, Y-axis: 600mm, Z-axis: 500mm, feed force (40% duty cycle) X-, Y-, Z-axis: 7000N, max. feed speed X-, Y-, Z-axis: 40m/min, rapid traverse speed Y-, Z-axis: 40m/min, rapid traverse speed X-axis: 70m/min, ball screw diameter/pitch Y-, Z-axis: 40/15mm, number of magazine pockets: 30, position coding: fixed-position coding, max. tool loading weight: 90kg, max. diameter of standard tools: 100mm, max. diameter of special tools with adjacent positions free: 140mm, max. tool length: 300mm, max. tool weight: 6kg, table clamping surface: 850x600mm, T-slots: DIN 650-14, loading height (top edge of table): 850mm, max. load: 600kg, connected load: 39kVA, control: Heidenhain iTNC 530, length: 2500mm, width: 4100mm, height: 3000mm, weight: 7,74t, operating hours: 60.366h. With documentation. Iisdpfx Aaezuwxqotef

Condition: used, HERMLE C 600 V is a 3-axis machining center, engineered for precision, high accuracy and reliability. Table 800×465 mm, travels X 600 / Y 450 / Z 450 mm, table load max 200 kg; tool changer 30 stations, spindle taper HSK‑A63. Spindle 20–16,000 min⁻¹, spindle power 15 / 10 kW; feed 1–30,000 mm/min, rapid 35 m/min, max feed force 6000 N. Supply 3×400 V 50 Hz, total power 35 kVA, weight ≈6800 kg, size 2500×2020×2750 mm, noise 78 dB(A). Coolant through spindle 40 bar. Achieves tight tolerances; typical sectors: automotive, aerospace, medical, watchmaking, tooling. Iijdpfx Aszuwdaeatjf

Condition: used, Year of construction: 2001, functionality: fully functional, Control system: ULTIMAX4 DSM Table size: 762 x 510 mm Max. table load: 1350 kgs Iijdszuphqopfx Aatjf X-travel: 610 mm Y-travel: 510 mm Z-travel: 610 mm Spindle speed: 10000 rpm Spindle taper: SK40 Tool magazine: 24-station Drive power: 11 / 9.4 kW Power requirement: 400V, 32A Weight: 4300 kgs Dimensions (LxWxH): 2350 x 2600 x 2700 mm Accessories, equipment: - Software options: DXF, 3D, Pocket/Islands, Ultinet (network card), Ramp/Helical, rigid tapping - Chip auger - Coolant tank - Signal lamp - Machine mounts - Electrical MPG - Manuals in PDF Description:The machine is in good condition and operates precisely. It is being sold due to a new equipment acquisition.Please note that the machine must remain in operation until mid-to-late September.

Condition: used, Year of construction: 2000, operating hours: 3,273 h, machine/vehicle number: 15015702974, travel distance X-axis: 710 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, torque: 130 Nm, controller manufacturer: Heidenhain 426/430, workpiece weight (max.): 350 kg, total height: 2,724 mm, total length: 2,756 mm, total width: 2,020 mm, table width: 500 mm, table length: 700 mm, rotary table diameter: 700 mm, overall weight: 5,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 15,000 W, number of spindles: 1, number of slots in tool magazine: 32, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, 5-Axis Machining Center DECKEL MAHO DMU 70V We offer for sale an advanced, universal vertical machining center, the Deckel Maho DMU 70V (part of the renowned DMG MORI group), equipped with a numerically controlled (NC) rotary/tilting table. The machine features a compact and robust design, minimizing its footprint in the production hall while offering full capabilities for advanced 5-axis machining. AXIS SPECIFICATIONS AND WORKING AREA • Axis travel (XYZ): X = 710 mm | Y = 520 mm | Z = 520 mm • Working travel: 710 mm (X) / 520 mm (Y) / 520 mm (Z) INNOVATIVE NC ROTARY/TILTING TABLE (4th and 5th AXIS) • Mounting surface dimensions: ∅ 700 mm x 500 mm (practical design with factory-cut sides, facilitating optimal mounting of vises and fixtures) • Maximum table load: 350 kg (full mechanical safety of the gearbox, bearings, and measuring system) Iiedpfjzumh Iox Aatsf • Axis rotation range: • C-axis (rotation): continuous / multi-rotation operation (advanced trochoidal milling strategies) • B-axis (tilting): wide working range of over 180°, providing excellent access to the workpiece and freedom for angled undercutting MAIN DRIVE AND SPINDLE • Spindle speed: continuously (steplessly) adjustable in the range of 20 – 12,000 rpm • Spindle power: 15 kW • Maximum torque: up to 130 Nm (powerful cutting force guaranteeing excellent stiffness and stability during heavy rough machining of hard materials) CONTROL SYSTEM AND TOOL MAGAZINE • Control system: Reliable and widely appreciated by operators, the Heidenhain 426/430 (simple dialog programming, intuitive menu) • Tool magazine: Automatic, compact chain-type magazine with a capacity of 32 positions (fast tool change in automatic cycles) LOGISTICAL AND CONNECTION PARAMETERS • Overall dimensions of the machine ready for operation (with chip conveyor): • Length: 2756 mm • Width: 2020 mm • Transport height: 2724 mm (the machine fits easily on standard trailers and passes through conventional hall doors) • Total machine weight: approx. 5,500 kg • Maximum power consumption (connection): up to 42 kVA • Input voltage: 400 V (AC - three-phase current) • Current protection (fuse): 63 A • Power supply frequency: 50/60 Hz MACHINE CONDITION AND ADDITIONAL INFORMATION The machine is in good technical condition, regularly serviced and maintained. It is ideally suited for both serial production and tool shops producing complex molds, dies, and precise 5-axis parts. The machine comes complete with a chip conveyor.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 6,276 h, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 24, number of axes: 3, This 3-axis DMG DECKEL MAHO DMC 63 V was manufactured in 2003. It features an X-axis travel of 630 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine is equipped with a Siemens 840D control unit and has a spindle speed of 10,000 rpm. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMC 63 V vertical machining centre we have for sale. Contact us for further details. Ijdpfx Aajzt N Sasteif - Total Power On: 24,787 h- Spindle / Cutting Time: 6,276 h- Apparent Power: 30 kVA- Max Current (Jn max): 50 A- Rated Current: 45 A- Voltage: 400 V / 230 V / 24 V- Frequency: 50/60 Hz Technical Specification Taper Size SK 40

Condition: used, Year of construction: 1997, Bridgeport VMC 800/22 CNC Vertical Machining Centre With Heidenhein TNC 426 Control Table Dimension 1,000 x 490mm (5 'T' Slots). Maximum Table Load 750kg. Axis Travel 'X'=800mm, 'Y'=510mm, 'Z'=500mm. Maximum Spindle Speed 6,000rpm (11kW Motor). Spindle Taper BT40. 22 Position ATC. S/No. 720971 (1997). Ijdszt N Rpepfx Aateif With Coolant System, Spindle Probe Interface, 2 Heavy Duty Machine Vices (Jaw Width 200mm) & Quantity Of Toolholders. Weight 3,600kg.

Condition: excellent (used), Year of construction: 2009, Hurco VM1 CNC Vertical Machining Center The machine is in very good condition. Technical specifications: Control: Winmax Year of manufacture: 2009 Travel in X-axis: 660 mm Travel in Y-axis: 350 mm Travel in Z-axis: 450 mm Table clamping area: 762 x 356 mm Iodpfszttdgsx Aatoif Spindle speed: 10 - 10,000 rpm Tool holder: SK 40 DIN 69871 Tool changer stations: 20 stations

Condition: excellent (used), Year of construction: 2007, Ultimax 4 control system Ijdpjztr Epefx Aateif Travel ranges X/Y/Z: 610 x 510 x 610 mm Table size: 760 x 510 mm Spindle speed: 12,000 rpm Tool magazine for 24 tools, SK 40 Chip removal system

Condition: used, Year of construction: 2014, x-travel 1200 mm y-travel 650 mm Isdjztfuqopfx Aatsif z-travel 520 mm control Heidenhain

Condition: excellent (used), Year of construction: 2022, operating hours: 1,316 h, DMG Mori M1 milling machine (version with 12,000 rpm). Year of manufacture: 2022. Very good condition, inspected by DMG service. Low operating hours, only 1,316 spindle running hours. The machine can be connected and tested on-site. Iiodpjzr Rugefx Aatsf

Condition: excellent (used), Year of construction: 2006, operating hours: 8,800 h, machine/vehicle number: 15405022544, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, nominal power (apparent): 35 kVA, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece length (max.): 790 mm, workpiece width (max.): 560 mm, workpiece height (max.): 460 mm, table width: 560 mm, table length: 790 mm, table load: 600 kg, overall weight: 4,500 kg, operating hours of spindle: 8,800 h, input voltage: 400 V, Equipment: documentation/manual, DECKEL MAHO DMC 635 V – CNC Machining Center – Heidenhain iTNC 530 – Year of Construction 2006 Description: For sale is a vertical 3-axis CNC machining center, DECKEL MAHO DMC 635 V, from our own machine inventory. The machine is being sold due to a restructuring of our machine park. It is in good visual condition. Inspection and a powered test run are possible by prior appointment. Technical Data: Manufacturer: DECKEL MAHO Model: DMC 635 V Machine Type: Vertical CNC Machining Center Year of Construction: 2006 Machine No.: 15405022544 Control: Heidenhain iTNC 530 Number of Axes: 3 Travel X-axis: 635 mm Travel Y-axis: 510 mm Travel Z-axis: 460 mm Table Size: approx. 790 × 560 mm Maximum Table Load: approx. 600 kg Tool Interface: SK 40 Rapid Traverse: up to approx. 30 m/min Machine Running Time: approx. 25,231 hours Spindle Hours: approx. 8,800 hours Connection Power: 35 kVA Operating Voltage: 400 V Frequency: 50/60 Hz Location and Handling: Iisdezr Iu Dopfx Aatsf Location: 22926 Ahrensburg, Germany Machine available for immediate delivery Inspection possible by appointment Dismantling, loading, and transport by the buyer or by agreement Sale ex works, unloaded The offer includes only the machine and the explicitly agreed accessories. Tools and tool holders shown in the pictures are not part of the offer unless expressly agreed otherwise. Price: Negotiable, plus VAT. All technical data is provided to the best of our knowledge, but without guarantee. Subject to prior sale and errors.

Condition: used, Year of construction: 2007, operating hours: 5,200 h, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, controller manufacturer: Fanuc, controller model: 0i MC, total height: 2,600 mm, total length: 2,200 mm, total width: 2,100 mm, table width: 510 mm, table length: 810 mm, table load: 500 kg, overall weight: 5,500 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 11 W, Equipment: chip conveyor, documentation/manual, 24 ATC Iisdpfxozrugye Aatsf Cooling through the spindle Manual paletchanger Chipconveyor

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 640 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, controller model: 828D, total height: 2,300 mm, total width: 1,800 mm, table width: 750 mm, table length: 360 mm, table load: 300 kg, overall weight: 4,200 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 7,500 W, product length (max.): 2,300 mm, number of axes: 3, This 3-axis KNUTH X-Mill 640 was manufactured in 2015. It features a travel of 640 mm on the X-axis, 400 mm on the Y-axis, and 500 mm on the Z-axis. The machine is equipped with a Siemens 828D control unit and a 16-fold double-arm tool changer. If you are looking to get high-quality machining capabilities, consider the KNUTH X-Mill 640 vertical machining centre we have for sale. Contact us for further details. - Table Height from Floor: 850 mm- T-Slots (Number / Width / Distance): 3 / 18 mm / 100 mm- Spindle Speed: 60 - 8000 rpm- Distance Spindle to Vertical Guide Way: 430 mm- Main Motor Power: 7.5 / 11 kW- Total Power: 10.00 kW- Feed Rate: 5 - 5000 mm/min- Rapid Feed Rate: 15000 mm/min- Positioning Accuracy: 0.01 mm- Repeatability: 0.005 mm- Machine Weight: 2500 kg (Manual lifting specification) / 4200 kg- Operating Voltage: 400 V / 440 V, 3-Phase, 50/60 Hz- Operating Temperature: 0°C ~ 45°C- Pneumatic Operating Pressure: >= 0.6 MPa (6 kg/cm²)- Operating Setup Time: 186,488- Tool Changer: 16-fold double-arm tool changer- Standard & Included Accessories: Siemens 828D control, electronic handwheel, spiral chip conveyor, servo drives for all 3 axes, 16-position tool changer, pneumatic tool clamping, air conditioning, fully enclosed work area, work light, Ethernet, USB interface, sloping chip tray, automatic central lubrication, spindle oil cooling, operating tools, operating instructions, X.div CNC rotary table 170 mm with manual tailstock for Siemens control, 6" manual chuck for X.div, BT40/B16 and BT40/B18 drill chuck mounts, MAS BT40-ER40-80 collet chuck, 15-piece ER40 collet set (3-26 mm), BT40 combination mandrels (Ø22, Ø27, Ø32 mm), WELDON BT40 milling chucks (Ø6, Ø8, Ø10, Ø12, Ø16, Ø20 mm) Technical Specification Taper Size BT 40 Iedpfezrnvuex Aatoif

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 12 m/min, controller manufacturer: Fanuc, controller model: Series 16i-M, workpiece weight (max.): 300 kg, total height: 3,140 mm, total length: 2,785 mm, total width: 4,825 mm, table width: 450 mm, table length: 700 mm, table load: 300 kg, overall weight: 7,500 kg, spindle speed (max.): 20,000 rpm, spindle nose: MAS 403 - BT40, number of spindles: 1, number of slots in tool magazine: 30, Equipment: documentation/manual, This is a very high-quality, 3-axis CNC jig boring machine/machining center from the Japanese manufacturer YASDA, specializing in extremely precise machining. The YBM-640V is primarily used for: Die and mold making. Precision components for the aerospace, medical, and semiconductor industries. Workpieces requiring tolerances of just a few micrometers. The machine comes from a very high-end machining company where it has always been perfectly maintained and is still in excellent mechanical condition, befitting YASDA's standards. Measurement reports are available upon request, and the machine can be inspected in working order by appointment. Additional options & accessories: Electronic handwheel Renishaw OMP60 workpiece probe. Filtermist extraction system. Weight & dimensions Iiodpfozrm N Tex Aatjf approx. 7,500 kg approx. 2785 x 4825 x 3140 (L x W x H)

Condition: used, Year of construction: 2007, x-travel 660 mm y-travel 350 mm z-travel 450 mm Iiedpfx Aezrh Rleatef Control Ultimax In our assessment, the machine is in good used condition and can be inspected under power by appointment. The machine is operational. The X-axis ball screw is making noise and should be replaced soon. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: used, Year of construction: 2011, Technical details: x-travel: 660 mm Iiedpozq S D Tsfx Aatjf y-travel: 355 mm z-travel: 500 mm total power requirement: 19 kW weight of the machine ca.: 4,1 t

Condition: used, Year of construction: 2007, x-travel 600 mm y-travel 450 mm z-travel 450 mm Control Heidenhain The machine is used and untested. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Ijdpezq Hl Eefx Aatjif Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, Year of construction: 2008, x-travel 700 mm Iedpfxszq Hkho Aateif y-travel 420 mm z-travel 610 mm Control Heidenhain output 22 kVA weight ca. 5.200 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Erowa automation Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: good (used), Year of construction: 2020, Hartford vertical machining center, model MVP-11, year 2020, with Hartrol Premium I control. Iiodpezq A Hfjfx Aatof

Condition: ready for operation (used), Year of construction: 2016, operating hours: 152 h, functionality: fully functional, machine/vehicle number: 665182, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel distances Travel distance X-axis: 650 mm Travel distance Y-axis: 550 mm Travel distance Z-axis: 500 mm Feed rates Feed rate X-axis: 30 m/min Feed rate Y-axis: 30 m/min Feed rate Z-axis: 30 m/min Spindle Spindle interface: HSK-E 40 Iijdpfxezquqce Aatef Spindle speed: 42,000 rpm Spindle running time: 151 h 20 min 08 s Spindle replacement: 2025 Cost of spindle replacement: approx. EUR 40,000 Tool magazine Number of tool slots: 40 Pallet system Pallet dimensions: approx. 320 × 320 mm Pallet clamping: Rotary table MACHINE DETAILS Machine type: CNC machining center Manufacturer: OPS INGERSOLL Model: SPEED HAWK 650 Year of construction: 2016 Electrical connection data Mains voltage: 400 V Mains frequency: 50 Hz Control voltage: 24 V DC Maximum fuse rating: 63 A Connected power: 38 kVA Dimensions and weight Overall height: 2,850 mm Overall length: 3,300 mm Overall width: 2,400 mm Machine weight: 9,000 kg EQUIPMENT Technical documentation Manual HSK-E 40 tool holders 3 pallets

Condition: like new (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 355 mm, travel distance Z-axis: 460 mm, controller model: SIEMENS 828D SHOPMILL, spindle speed (max.): 10,000 rpm, The machine has not been used yet! TECHNICAL DETAILS Travel range X-axis: 610 mm Travel range Y-axis: 355 mm Travel range Z-axis: 460 mm Spindle speed: 10,000 rpm Table size: 700 × 350 mm Table load capacity max.: 350 kg Tool changer positions: 16 MACHINE DETAILS CNC control: Siemens 828D ShopMill Dimensions & Weight Dimensions (L x W x H): 1,850 × 1,820 × 2,400 mm Iisdpfxezqd Nns Aatjf Machine weight: 2,500 kg EQUIPMENT Coolant supply through the milling spindle (internal cooling) High-pressure coolant pump (pressure: 20 bar, flow rate: 55 l/min) Separate coolant tank Preparation for 4th axis Full enclosure Automatic tool clamping Automatic spindle blow-out Chip conveyor with hinged chain design Screw-type chip conveyor Oil separator Coolant system Automatic central lubrication Work light Portable electronic handwheel for 3 axes Telescopic covers for 3 axes Chip flushing system CE conformity

Condition: good (used), DMG DMC 63 V, serial number 2885-0725, 11,972 operating hours. Iodpozqdlpsfx Aatjif Available at the end of 2026.