SCHEIDT GmbH

Year of construction: 2004, condition: ready for operation (used), A horizontal bed cycle lathe DMT with extensive accessories is available. Turning diameter over bed/cross slide: 650mm/400mm, max. turning length: 1500mm, travel X/Z: 440mm/1500mm, speed: 2000rpm, spindle bore: 106mm, spindle bearing diameter: 150mm, rapid traverse X/Z: 5m/10m/min, tailstock quill diameter: 100mm, tailstock quill stroke: 200mm, tailstock taper: MT5. Machine dimensions X/Y/Z: approx. 3500mm/2000mm/2300mm, weight: approx. 5000kg. Documentation available. On-site inspection is possible. Gtsdpfex Uq Ubjx Admst

Year of construction: 1996, condition: ready for operation (used), A cycle-controlled CNC lathe Gildemeister is available. Center distance: 1500mm, max. turning length: 1500mm, swing diameter over bed/cross slide: 500mm/290mm, speed: 2800rpm, spindle bore: 70mm, spindle torque: 1050Nm, travel X/Z: 260mm/1600mm, rapid traverse X/Z: 6m/8m/min, feed rate: 5m/min, feed force: 5kN, tailstock quill stroke: 180mm, tailstock quill diameter: 80mm. Machine dimensions X/Y/Z: approx. 3200mm/1800mm/1900mm, weight: approx. 3100kg, operating hours: 79727h. Documentation available. On-site inspection is possible. Gedpfx Adex Uq Uhemett

Year of construction: 1992, condition: ready for operation (used), Number of spindles: 6, max. bar capacity: 42mm, max. machining diameter: 42mm, speed: 5000rpm, machining slides: 4, number of slides front/rear: 4/2. Machine dimensions X/Y/Z: approx. 7200mm/1700mm/2300mm, weight: approx. 10000kg. The machine has an electrical problem as a result of which the control does not start up. Documentation available. On site inspection is possible. Godex Tum Sjpfx Admott

Year of construction: 1995, condition: ready for operation (used), Travel X/Z: 180mm/510mm, max. turning length: 500mm, max. turning diameter over bed/face slide: 440mm/254mm, spindle speed: 3600rpm, bore: 70mm, tool stations: 8, rapid traverse: 20m/min. Machine dimensions X/Y/Z: approx. 2600mm/1650mm/1800mm, weight: approx. 4300kg, controls: Siemens Sinumerik. Including collet and jaw chuck. Documentation available. On-site inspection is possible. Expected to be available from April 2026. Gsdpfx Adox Tum Eemstt

Condition: good (used), Year of construction: 1998, ZMM Sliven - CU 1000 steady rest Gtodjx Ttfaepfx Admet

Condition: ready for operation (used), Year of construction: 2013, Immediately available from university: L & Z Lathe Eagle Type LC 340 Year of manufacture: 2013 Gtedpox Tq Aisfx Admot Centre height: 170 mm Swing over bed: 340 mm Swing over cross slide: 205 mm Turning length: 1000 mm Spindle bore: 38 mm Drive: 1.5 kW Spindle speeds: 60 – 2000 rpm Tailstock quill: 40 mm Chuck: 160 mm Faceplate: 200 mm Four-way toolpost Weight: 2 t Price: EUR 3,500.— plus VAT, ex location.

Condition: excellent (used), Year of construction: 2001, Length:1200mm Width:800mm Height:1200mm Gedpfx Adox Tp Dxsmott Weight:290kg

Year of construction: 1968, condition: ready for operation (used), Offered is a lead and feed screw lathe. Swing diameter over bed 710mm, over carriage 480mm. Distance between centers 1000mm. Spindle bore 71mm. Speeds 18-800rpm (12 steps). Motor power 7.5kW. Machine weight approx. 3070kg. Equipped with Heidenhain digital readout, chip protection wall, splash guard, coolant system, and four-position tool post. Repaired and inspected prior to storage. Inspection possible by prior arrangement. Gtedpsx Th Ngjfx Admst

Year of construction: 2008, condition: ready for operation (used), Offered is a CNC lathe (sub-spindle, milling/C-axis, Y-axis). Equipped with bar feeder for balls smaller 120mm and CNC singulation for balls larger 120mm, incl. Fanuc six-axis robot M-16iB with R-30iA control for automated loading and unloading as well as a bunker for raw material supply. Machine is operational. Inspection possible by prior arrangement. Gtsdpfxsx Th Nms Admst

Year of construction: 2002, condition: ready for operation (used), Swing diameter over bed/cross slide: 590mm/450mm, max. turning diameter: 355mm, max. turning length: 1233mm, travel X/Z: 250mm/1330mm, rapid traverse X/Z: 20m/min/24m/min, positioning accuracy X/Z: +/-0.005mm, repeatability X/Z: +/-0.002mm, speed: 3500rpm, spindle bore: 90mm, bar capacity: 76mm, tool stations: 12, machine dimensions X/Y/Z: approx. 4100mm/1950mm/1850mm, weight: approx. 6700kg, control: Fanuc 18i-T. Documentation available. On-site inspection is possible. Gsdpfxsx S Rcgj Admjtt

Year of construction: 2007, condition: ready for operation (used), Turning diameter: 120mm, turning length: 400mm, travel X/Z: 400mm/400mm, spindle bore: 42mm, speed: 8000rpm, chuck diameter: 150mm, tool stations: 12, tool interface: VDI 20. Machine dimensions X/Y/Z: approx. 2500mm/1400mm/1700mm, weight: approx. 2500kg. Documentation available. On-site inspection is possible. Godjx S Rbijpfx Admett

Year of construction: 2014, condition: ready for operation (used), A lightly used Hyundai CNC turning machine is available. Turning diameter: 560mm, turning length: 2100mm, main spindle power: 30kW, spindle speed: 2000rpm, tool turret: Hyundai BMT 75, tool stations: 12, tool holders: 8, coolant pressure: 20bar. Machine dimensions X/Y/Z: approx. 3750mm/2250mm/2300mm, weight: approx. 9000kg, control: Fanuc 32i, operating hours: 230h, power-on hours: approx. 1450h. Including tool measurement, power chuck Samchully HCH-15 (381mm), 6 sets of soft jaws, 1 set of hard jaws, steady rest SMV SLU-B and hinge belt conveyor. Documentation available. On-site inspection is possible. Gtedpfx Adjx Sywysmet

Year of construction: 1990, condition: ready for operation (used), A CNC lathe Gildemeister is available. Swing diameter over bed/face slide: 600mm/360mm, bed dimensions X/Y: 350mm/450mm, carriage length: 620mm, carriage width: 250mm, facing travel: 1100mm, chuck diameter: 315mm, spindle bore: 107mm, spindle diameter: 140mm, spindle power: 30kW, torque: 950Nm, speed: 3150rpm, rapid traverse X/Z: 10m/min/5m/min. Quill diameter: 100mm, quill stroke: 180mm, max. tailstock pressure: 1200daN, turning length: 1000mm. Machine dimensions X/Y/Z: approx. 4350mm/2050mm/2000mm, weight: approx. 6400kg, operating hours: 49811h. Documentation available. An on-site inspection is possible. Gtjdpfox R Duajx Admst

Condition: used, Technical details: turning diameter over bed: 3800 mm turning diameter over slide rest: 3200 mm turning length: 12000 mm faceplate turning speed range -stepless-: 2 - 200 U/min max. workpiece weight: 90.000 kg bed width: 4000 mm Gsdpfsx Ngzyjx Admett 2 steadies *

Condition: ready for operation (used), functionality: fully functional, Weiler Commodor in good working condition. Specifications: Swing diameter over bed: 380 mm Swing diameter over cross slide: 190 mm Distance between centers: 1000 mm Spindle bore: 56 mm Speed: 25–2000 rpm Motor power: 4 kW Machine equipped with: Gtsdpfex Ngpdjx Admet 3-axis digital readout 3-jaw chuck with multiple jaws Coolant system Multifix quick-change tool post with 4 holders Collet system with collets Bed stop

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 8531, Auction of a Famot MEXPOL TUM 35! Gtedpfx Ajx Ngnmjdmst

Year of construction: 2005, condition: ready for operation (used), A lathe (Universal Turning Solution) is offered, control: Fanuc, tool turret: 12-station, tailstock, 3-jaw chuck. Tool setting arm: Renishaw HPRA. Inspection is possible by arrangement. Godpox I Rpxofx Admott

Condition: excellent (used), Year of construction: 2024, operating hours: 314 h, functionality: fully functional, machine/vehicle number: LL393806057, total length: 8,470 mm, total width: 3,050 mm, total height: 2,370 mm, overall weight: 20,500 kg, Axe & Status Tuscan LL550 X 6000 5-Bedway Heavy Duty Lathe With Fanuc Series 0i-TF Plus CNC Control Gtsdpox Ivzmefx Admet Running Time 314 Hours. Swing Over Bed Ø950mm. Centre Height Approx 575mm. Distance Between Centres Approx 6,000mm. Carriage Type Box (2 Box Way), Carriage Width Approx 955mm, Cross Slide Width Approx 450mm, Bed Width 990mm. Axis Travel 'X'=480mm, 'Z'=6,000mm. Feed Rate 'X'=0-3,000mm/min, 'Z'=0-3,000mm/min. (2) 'FCG-32C' Ø800mm x Ø320mm Through Bore 4-Jaw Manual Chucks (Front & Back of Spindle). (2) SMW Autoblok 'K4 ZSW' Programmable Steadies, Range Ø52mm - 280mm. Headstock Spindle Nose A2-20. Spindle Bore Ø305mm. Spindle 'X' Axis Servo Motor 3kW, 'Z' Axis Servo Motor 7kW. Spindle Speeds 7-400rpm (Motor 30/37kW), Morse Taper 6. V12-200 Hydraulic 12 Station Turret, 32mm Tool Size, Ø50mm Boring Bar Holder Dimension. Motorised Tailstock Body Movement, Quill Ø165mm, Quill Travel 250mm, MT 6. S/No LL393806057 (2024). Electrical Specification AC220V/50Hz, 3 Phase. Automatic Doors & Full Cover Guard, Motorised Fondex Front & Rear Chip Conveyors, Auto Lubrication & 15-Bar Coolant System, Air Conditioned Electric Cabinet, Halogen Work Lights, Unimag DS-2030-30 Disc Type Oil Skimmer, Yong Teng E04-AL60 kVA Transformer, Plus: (2) Steel Cabinets: (1) 500mm x 500mm x 800mm With 6 Drawers & (1) 1,000mm x 700mm x 1,000mm With 6 Drawers, Full Range Of Machine Manuals, Ø800mm 4-Jaw Manual Chuck (Already Described In Original Detail) With Backing Plate & Spare Jaws, (11) Assorted C6 Capto Adaptors Including Boring Bar Holders, Tool Blocks & Facing Tool Holder,; Boring Bar Attachment (To Hold up to 150mm). Overall Dimensions Approx 8,470mm x 3,050mm x 2,370mm High; Weight Approx 20,500kg.

Condition: ready for operation (used), WMW Niles Ø 1400 x 2000 mm Godpfx Asx Imlcodmjtt Distance between centers: 2000 mm Swing over bed: 1400 mm Swing over cross-slide: 1100 mm Swing in gap: 1800 mm Diametre of main spindle bore: 90 mm Power on main spindle: 14 kW Number of speeds: 382 rpm Chuck (3/4 pinch) -- diametre: 1200 mm

Year of construction: 2010, condition: ready for operation (used), A twin-spindle turning and milling center Mazak is available. Travel X/Y/Z: 580mm/160mm/1545mm, B-axis: 225°, C-axis: 360°, center distance: 1500mm, max. turning diameter: 660mm, swing diameter over bed: 660mm, speed main spindle/counter spindle: 5000rpm, tool stations: 40+9, coolant pressure: 70bar. Machine dimensions X/Y/Z: approx. 5200mm/2550mm/2600mm, weight: approx. 14000kg, spindle hours: 24679h. Including high-pressure coolant, SMW steady rest, SMW chuck, steady rest integration, Renishaw probe, measuring probe, CAD/CAM software Topsolid 7.18, oil skimmer, postprocessor and Inspection-Plus package. The machine was mainly used for finishing. Documentation available. An on-site inspection is possible. Gtsdpex Ih Dgefx Admet

Year of construction: 2022, condition: ready for operation (used), A CNC double-spindle turning machine DMG Mori is available. Turning length: 800mm, power: 25kW/32kW, torque: 280Nm/360Nm, speed: 5000rpm, Y-axis: +/-100mm, B-axis: +/-110°, tool stations: 80, max. chuck diameter: 210mm, tool interface: HSK-A63, drawtube inner diameter: 67mm, control: Siemens 840D sl, operating hours: approx. 4786h, program hours: approx. 1937h. Including short bar loader IRCO ILS-MUK 100/16, oil mist separator and scraper chip conveyor. Documentation available. On-site inspection is possible. Gsdpjx H S I Tjfx Admstt

Condition: ready for operation (used), Distance between centers: 500mm, center height: 140mm, turning diameter over bed/cross slide: 295mm/155mm, spindle bore: 36mm, speed: 3550rpm, tailstock taper: MK3. Machine dimensions X/Y/Z: approx. 1500mm/800mm/1250mm, weight: approx. 700kg. On site inspection is possible. Gtjdpfx Asx Hz Rqedmst

Condition: ready for operation (used), A conventional precision lathe Weiler is available. Distance between centers: 650mm, center height: 160mm, swing diameter over bed/faceplate: 320mm/190mm, spindle bore: 43mm, speed: 2500rpm, quill diameter: 40mm, quill travel: 85mm. Machine dimensions X/Y/Z: approx. 1800mm/900mm/1600mm, weight: approx. 1050kg. An on-site inspection is possible. Gedpfx Adjx Hz N Homett

Year of construction: 1961, condition: ready for operation (used), Faceplate diameter: 1255mm, with complete documentation, without accessories. The machine is slightly worn and shows signs of use, the side support is missing, one spindle nut is defective, the gears and bearings of the table have been recently overhauled, and the machine has been serviced internally and externally. Viewing on site is possible. Gedpfx Aox Hhx Ujdmjtt

Year of construction: 2011, condition: ready for operation (used), A defective CNC 6-spindle lathe Index is available: Speed: 10000rpm, main spindle power: 8.7kW/15kW, max. bar diameter: 22mm, tool stations: 10, travel X/Z: 62mm/85mm, travel Y: +/-12mm, max. clamping diameter: 22mm, machine dimensions X/Y/Z: approx. 3350mm/1850mm/2900mm, weight: approx. 6000kg, control: Siemens 840C. Includes tool holders, Knoll coolant system, Iemca SIR MS 22 P bar loader, HandlingTech robot cell. One spindle must be refitted with new bearings and the synchron spindle must be replaced. Documentation available. An on-site inspection is possible. Gtjdpfxjx E Ad Aj Admet