LiCON mt GmbH & Co. KG

Condition: excellent (used), 1 piece HSS milling cutter Bedpezw U S Tefx Ac Tjwt various diameters roughing and finishing cutter with diameters from 14 - 40 mm very good condition 17.5 kg

Condition: excellent (used), Roughing and finishing cutters MK 3 HSS Diameter from 20 - 30 mm Approx. 9 kg Bwjdpfx Acezw U S Ho Tst

Condition: used, Rotary table, make WMK 'Fritz Heckert' Model D315 k TGL 28 561/01 Bodpfszw H Rhsx Ac Tswt Serial number 33402 • Clamping surface D = approx. 310 mm

Condition: like new (used), 4 pieces used deep clamps, brand AMF Type 6490-14 Bsdpfxjzw H N Ro Ac Tswt Width = 40 mm Length = 80 mm Slot width = 14 mm Thread = M10

Condition: used, Schmid-Kosta TWS/6 Dividing Head Horizontal/Vertical Quick-Change Dividing Head – Schmid-Kosta Bwjdpozw H Iysfx Ac Tjt Type/Model: TWS/6 Condition: Used Technical Data Center height: 200 mm Clamping surface 1: 200 mm x 250 mm Clamping surface 2: 350 mm x 250 mm Bore: 72 mm Rotary table: Ø 250 mm Weight: approx. 60 kg

Condition: excellent (used), stable angle table, used Clamping surface 800 x 360 mm 5 T-slots Distance = 65 mm Bwedpjzu Inijfx Ac Tot

Condition: good (used), DECKEL universal table - small - , used Clamping surface 800 x 240 mm Bjdpfxszucr Ne Ac Tewt Weight estimated approx. 0.1 t

Condition: excellent (used), Product description: Model: RKR!200/2 Cleaning basin on a stable base with cross braces. The perforated sheet made of galvanized steel is set into a basin with a conical outlet. The rear and side walls are hot-dip galvanized and equipped with edge protection. Bwjdpfxezua Eae Ac Tot • Self-priming pneumatic drum pump • Dimensions: 120 x 80 x 133 cm (L x W x H) • Load capacity: approx. 30 kg • Working height: approx. 1040 mm Model: RKR!200/2!D

Condition: used, Sheet metal cabinet with hinged door, LID Original lid for the accessory cabinet Lid for FP1 / FP2 / FP3 Bwodpfx Acoznn Hxj Tot with 2 sliding shelves without contents Length: 1000 mm Width: 750 mm Height: 960 mm

Condition: used, Keyway milling head, head for DECKEL milling machine, type FP 1 Factory number: 21948 Dovetail width: approx. 74 - 88 mm Bodpoznn Hrsfx Ac Tswt Dovetail height: approx. 14.5 mm Dovetail length: 285 mm Distance from the front edge of the dovetail to the center of the gear: approx. 200 mm Stroke size: max. 80 mm Stroke rate: max. 475 double strokes/min. Tool holder: 4-sided, 16 x 16 mm with clamping plate - Stroke size adjustable via eccentric adjustment - Drive from the machine gearbox, within the dovetail guide (as with the normal vertical head) - This keyway milling head is inserted into the dovetail guide in place of the normal vertical milling head (Mounting in place of the vertical milling head) - Drive gear in the keyway milling head, 39 teeth, gear width 15 mm, presumably 15° pressure angle - Keyway milling head can be rotated 360° on the flange plate, degree scale +/- 35° - Small breakout point on the housing Weight: 28.5 kg DECKEL FP1 has a pressure angle of 15° on the drive wheel. DECKEL FP2 + FP3 have a pressure angle of 20° on the drive wheel.

Year of construction: 1996, condition: used, For sale is a heavy-duty CNC milling head, SK50. This is a universal milling head in a heavy-duty design for SK50 toolholders. It is ready for immediate use. It can be manually swiveled and does not have internal cooling. It is suitable for various machines, such as CME, MTE, and others. It offers excellent clamping force, runout, and smooth operation. It can be test-run on our machines. It was removed from an MTE BF2200, which was in production until the very end. If you are interested, please contact us. The price does not include transportation. Bwjdpfjzmq Icex Ac Tot

Condition: used, Universal rotary and tilting table for DECKEL machines Bwjdpfx Acjzlrgwo Tet Bearing surface 680 x 260 mm

Condition: good (used), Speed head up to 30.000 rpm Bwedpfxezk U Sto Ac Tst

Condition: used, well-maintained universal milling table for Bwjdpszkaycsfx Ac Tot DECKEL milling machine.

Condition: new, diameter / mm Cutting (quantity) / weight / kg JUNKER/JUKOMET HF grinding spindle unit mW15/15-4-48/74, 4-pole Bwjdpfx Ajzfqm Asc Tst Condition: New Includes test report Weight: 65 kg Motor No.: 15028200-001 Part No.: R9.02222/1

Condition: new, diameter / mm Cutting (quantity) / weight / kg JUNKER/JUKOMET Workpiece Spindle 9 Condition: New Includes test report Part No.: 9 Bjdozfqmvepfx Ac Towt

Condition: used, CNC path control, computer, control unit, logic unit Heidenhain Type TNC 415 B / LE 415 B Logic unit LE 415 B, year of manufacture 1999 Item number: 267 223 49 Serial number: 5 667 843 S5 PC serial number: 252 415 01 Bwodpfx Aezfqb Tec Tet NC serial number: 259 930-12 Installed modules: - Computer board Type S4, item number: 268 553 01 / serial number: 5 615 221 - PLC graphics Type S3, item number: 257 954 03 / serial number: 5 556 573 A - Control loop board Type G3, item number: 275 705 02 / serial number: 20 232 905 C - Power supply, item number: 236 484 10, serial number: 5 600 157 / S4 - LE 415 B neutral, item number: 267 223 CC / serial number: 5 618 369 / S4 Housing dimensions L x W x H: 510 x 190 x 415 mm Weight: 11 kg Very good condition - functional guarantee

Condition: good (used), Clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools, step clamps, low clamps, clamping irons, cranked clamping irons -Manufacturer: AMF, Clamping tool, cranked clamping iron, 2 pieces -Type: 18x160 -Dimensions: see photos -Price/Fee: complete -Dimensions each: 163/50/H170 mm Bsdpfx Acjzfia Ie Tswt -Weight: 1.8 kg

Condition: excellent (used), Schunk Here we offer you a material separator. Technical data: External dimensions: Width: 1325 mm Control panel width: 565 mm Depth: 1300 mm Shuttle overhang: 730 mm Height: 1870 mm Light column overhang (top): 350 mm Operator height: 900 mm Speed: X, Y: Linear motor axes 2000 mm/s Bwedpfxjzd Sq To Ac Tjt Z: Linear motor axes 1000 mm/s Weight: approx. 1500 kg. Accuracy Repeatability: 0.02 mm Positional accuracy: 0.02 mm Separation accuracy: 0.10 mm with vision system 0.15 mm without vision system Working area Max. separation area X, Y: 430 mm x 350 mm Max. material size X, Y: 430 mm x 350 mm LP thickness: 0.5 - 3.2 mm Supply 400V / 50 Hz / 16 A Condition: used Type: SAR-1300 B Scope of delivery: As shown in the picture (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Year of construction: 2025, condition: new, Magnetic table, 60 kg/square meter, 18x18 milling pattern for milling machines. Magnetic clamping plate 200x300x80mm, 60 kg/square meter, 18x18 milling pattern – 470 EUR Magnetic clamping plate 200x400x80mm, 60 kg/square meter, 18x18 milling pattern – 660 EUR Bwodpfx Ajzd Rlvsc Tjt Magnetic clamping plate 300x400x80mm, 60 kg/square meter, 18x18 milling pattern – 800 EUR Magnetic clamping plate 300x600x80mm, 60 kg/square meter, 18x18 milling pattern – 1100 EUR Magnetic clamping plate 400x800x80mm, 60 kg/square meter, 18x18 milling pattern – 1880 EUR Magnetic clamping plate 400x1000x80mm, 60 kg/square meter, 18x18 milling pattern – 2300 EUR Magnetic clamping plate 500x1000x80mm, 60 kg/square meter, 18x18 milling pattern – 2800 EUR Round magnetic clamping plates of this type with a diameter of 200-800 mm.

Condition: excellent (used), Vertical head MWM Ruhla SK 40 Pinion travel 80 mm Diameter of mounting flange 180 mm Bwodpjzdub Iofx Ac Tet Bolt circle diameter 135 mm Four mounting holes, diameter 15 mm Diameter of centering pin 75 mm Height 500 mm Width 190 mm Depth 250 mm Weight 50.5 kg

Condition: excellent (used), Year of construction: 2018, overall weight: 320 kg, total length: 1,200 mm, total width: 800 mm, total height: 700 mm, CNC Bed-Type Milling Machine Correa Anayak - HVM BIRA Spindle ISO 50 (DIN-69871-B) Pull studs DIN-69872-B Clamping force 1900 daN Automatic B Axis 1.0 Degrees Automatic C Axis 2.5 Degrees Power 60/100 % 22/30 kW Bodpfx Acozcpg Do Tswt Speeds 60 - 3000 2 Speed Range Automatic lubrication (Air-Oil) Gear; ZykloPalloid, Klingelnberg-System, HPG-5 Qulaity-6 with DIN3965 Length:1200mm Width:800mm Height:700mm Weight:320kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2026, GMN TS120x400-61913, spindle, SK 40 Bedpfxozbrlgj Ac Towt New

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Handover: in its current condition as inspected -Condition: see pictures -Clamping angle: for workpiece clamping -Table surface: 730x610 mm, height 1595 mm -Wall thickness: 35/42 mm -Oblong hole: 25x150/25x105 mm -Dimensions: see photos Bwedjzav Hrjpfx Ac Tet -Number: 4x mounting brackets available -Price: per piece -Dimensions: 610/730/H1595 mm/piece -Weight: 658 kg/piece

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 1085x885 mm, height 2185 mm -Wall thickness: 70 mm -Threaded holes: M20 Bjdpfjzav Dwjx Ac Tswt -Dimensions: see photos -Number: 2x mounting brackets available -Price: per piece -Dimensions: 885/1085/H2185 mm/piece -Weight: 2280 kg/piece