ELMOSİS Elektrik Mühendislik Otomasyon Danışmanlık Bilişim ve Yazılım Sistemleri İthalat İhracat San. Tic. LTD. ŞTİ.

Year of construction: 2021, operating hours: 4,748 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021, total operating hours: 4748.2 h For sale is a used temperature test chamber from Weiss Technik. This chamber is used for testing components and materials under various temperature conditions (e.g. cold, heat, aging). Model designation explanation: T = Temperature test chamber 1000 = approx. 1000 liters volume 70 = low-temperature range (-70 °C) e = energy-optimized design 5 = temperature change rate (model series) Equipment features: - Stainless steel interior - Recirculating air fans - Touch control (WEBSeason) - Viewing window - Automatic/manual temperature control Technical specifications: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: Cooling approx. 6 K/min Heating approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1200 kg For your peace of mind as a buyer, the following work is carried out on our chambers prior to sale: 1. Functional inspection and replacement of any necessary components 2. New filling with legally compliant refrigerant when required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in technical data and specifications reserved!) Hnodpjy Dd Nqsfx Aansk For further questions, please feel free to contact us by phone.

Year of construction: 2021, operating hours: 5,128 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021 Operating hours: 5018 h For sale is a used temperature test chamber from Weiss Technik. This chamber is used to test components and materials under various temperature conditions (e.g., cold, heat, aging). Meaning of the designation: T = Temperature test chamber 1000 = approx. 1000 liters volume 70 = low temperature range (-70 °C) e = energy-optimized design 5 = temperature change rate (series) Features: - Stainless steel interior - Recirculating air fans Hjdey Dclwepfx Aansnk - Touch operation (WEBSeason) - Viewing window - Automatic / manual temperature control Technical specifications: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rates: Cooling: approx. 6 K/min Heating: approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1300 kg For your peace of mind as a buyer, please note the following: The following procedures are carried out on all chambers prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see photos) (Specifications and data are subject to change and errors reserved!) If you have any further questions, we will be happy to answer them by phone.

Year of construction: 2021, operating hours: 5,018 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021 Operating hours: 5018 h For sale is a used temperature test chamber from Weiss Technik. The test chamber is used for testing components and materials under various temperature conditions (e.g., cold, heat, aging). Designation meaning: T = Temperature test chamber 1000 = approx. 1000 liters volume 70 = low-temperature range (-70 °C) e = energy-optimized version 5 = temperature change rate (series) Features: - Stainless steel interior - Recirculation fans - Touch operation (WEBSeason) Hnedpfxoy Dclqs Aanek - Viewing window - Temperature control (automatic/manual) Technical specifications: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: Cooling: approx. 6 K/min Heating: approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3-phase Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1300 kg For your peace of mind as the buyer, the following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical specifications!) We are happy to answer any further questions by phone.

Year of construction: 2021, operating hours: 5,128 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021, operating hours: 5128 h For sale is a used temperature test chamber from Weiss Technik. This chamber is designed for testing components and materials under various temperature conditions (e.g. cold, heat, aging). Hnedpfxoy Dck Te Aanjk Model designation explanation: T = Temperature test chamber 1000 = approx. 1000 liters capacity 70 = low temperature range (-70 °C) e = energy-optimized version 5 = temperature change rate (series) Equipment features: - Stainless steel interior - Recirculating air fans - Touch operation (WEBSeason) - Viewing window - Automatic/manual temperature control Technical data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: Cooling: approx. 6 K/min Heating: approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (HxWxD) Internal dimensions: approx. 950 x 1100 x 950 mm (HxWxD) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1200 kg For your security as a buyer, please note the following information: The following steps are performed on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful checking, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see pictures) (Specifications and technical details subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Year of construction: 2021, operating hours: 4,748 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021, running hours: 4748 h Offered for sale is a used temperature test chamber from Weiss Technik. The chamber is used for testing components and materials under various temperature conditions (e.g., cold, heat, aging). Explanation of the model designation: T = temperature test chamber 1000 = approx. 1000 liter volume 70 = low temperature range (-70 °C) e = energy-optimized version 5 = temperature change rate (series) Equipment features: - Stainless steel interior - Recirculation air fans Hnedpfx Ajy Dciioanjk - Touch control (WEBSeason) - Viewing window - Automatic / manual temperature control Technical data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: Cooling: approx. 6 K/min Heating: approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (HxWxD) Internal dimensions: approx. 950 x 1100 x 950 mm (HxWxD) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerants: R449A / R23 Weight: approx. 1200 kg Important safety information for buyers: The following processes are carried out on the chambers we offer before delivery: 1. Function check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see image) (Technical data subject to change and errors excepted!) We are happy to answer any further questions by phone.

Condition: like new (used), Ishida x-ray machine is in great condition. It's hardly been used. It has come direct from a major food manufacture. Hsdpfx Aaey A Rh Rsnsnk

Year of construction: 2019, operating hours: 3,575 h, condition: excellent (used), Weiss Climate Test Chamber ClimeEvent C/1000/70/5, water-cooled, 1000 liters, year of manufacture 2019, operating hours: 3,575 h. For sale is a high-quality climate test chamber of the type ClimeEvent C/1000/70/5. This unit is used in industry, development, and quality assurance to test components and products under extreme temperature and climate conditions. The chamber enables realistic simulation of environmental conditions – from severe cold to high temperatures as well as humidity exposure. Ideal for electronics, automotive, materials testing, and research. The unit operates reliably and reproducibly and is designed for long-term tests as well as standard-compliant testing. With this climate chamber, temperature and humidity conditions can be precisely set and controlled. This enables you to test aging, load, and function of components under real-world environmental conditions. Typical applications include temperature cycling tests, climatic tests with humidity, and endurance tests. Thanks to rapid temperature changes (up to approx. 5 K/min), accelerated testing is also possible. Technical specifications: Type: ClimeEvent C/1000/70/5 Year of manufacture: 2019 Temperature range: approx. -70 °C to +180 °C Temperature change rate: up to approx. 5 K/min Humidity range: approx. 10% to 98% r.h. Interior (test chamber): approx. 950 x 1100 x 950 mm Volume: approx. 1000 liters External dimensions (approx.): 2000 x 1415 x 2030 mm Power supply: 3/N/PE AC 400 V ±10% / 50 Hz Rated power: approx. 21 kW Rated current: approx. 34 A Refrigerants: R449A / R23 Weight: approx. 1,300 kg Important information for you as a buyer for your security: The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Specifications and technical details subject to change and errors!) Hodoy Avfzjpfx Aanenk For further questions, feel free to contact us by phone.

Condition: excellent (used), Weiss Umwelttechnik WT-600/70/5 Temperature Test Chamber -70°C to +180°C Water-cooled Available for sale is a pre-owned temperature test chamber from Weiss Umwelttechnik. The unit is fully functional and has been tested. This is a temperature-only test chamber without humidity control. The chamber is suitable for testing components, electronics, and materials under extreme temperature conditions. It is widely used in industry, development, and quality assurance processes. The temperature range spans from -70°C to +180°C. The device offers rapid heating and cooling rates and uses internal air circulation to ensure uniform temperature distribution within the chamber. Cable ports of 125 mm and 50 mm are included. Technical data: Model: WT-600/70/5 Cooling / heating operation: -70°C to +180°C Temperature change rate: Cooling: approx. 6 K/min Heating: approx. 6 K/min External dimensions (with hinges and door lock): Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions (without hinges and door lock): Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Test chamber volume: approx. 600 liters Electrical connection: 3/N/PE AC 400V ±10% 50Hz Nominal power: 16 kW Nominal current: 19 A Main fuse required: 29 A slow-blow Hnedjy At Sxopfx Aanok Permissible test load: Total rack capacity: 80 kg Chamber floor: 80 kg, Shelf: 40 kg Refrigerant: R 404A/R23 Weight: 675 kg For your safety as a buyer, please note the following: The following procedures are performed on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a trial run monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Year of construction: 2021, condition: excellent (used), Zwick/Roell Universal Testing Machine RetroLine 50 kN (Z050/TH), year of manufacture 2021, upgraded as part of a RetroLine conversion. The machine was used in ongoing operation and is in good working condition. Thanks to the modernization with RetroLine tC II and regular maintenance, the system is ready for immediate use. TECHNICAL DATA: - Maximum force: 50 kN - Test speed: 0.001 – 500 mm/min - Test space height: approx. 1380 mm - Test space width: approx. 440 mm - Data acquisition rate: 400 kHz Hodpfxsy Attve Aansnk - Data transmission rate: 500 Hz (optionally up to 2000 Hz) - Interface: Ethernet EQUIPMENT: - Xforce load cell type P (Precision) incl. calibration certificate - Accuracy class 1 according to ISO 7500-1 from 200 N - Accuracy class 0.5 from 1000 N - Extensometer / measuring sensor - Gripping tools / jaws - Ball screw spindles - Adapter bolts 36 mm SPECIMEN HOLDERS: - Wedge screw specimen holders up to 50 kN - Symmetrical and asymmetrical clamping - Temperature range: -40 °C to +250 °C Jaw inserts, steel (1 set = 4 pieces) - Serration pitch: 0.75 mm - Dimensions: 80 x 60 mm - Including specimen stop SOFTWARE: - testXpert III (Master test method, 3rd license) - Includes layout, results, export, channel, report and organization editors - Includes Virtual Testing Machine (VTM) PC system: DELL with touch monitor CONDITION: Used, fully functional, good condition. The machine was in operation until recently. SERVICE: Fully maintained and calibrated (2022 / 2023 / 2024 / 2025) SCOPE OF DELIVERY: - Zwick/Roell RetroLine 50 kN testing machine - PC system with testXpert III software - 50 kN load cell - Extensometer / measuring sensor - Gripping tools / jaws - Documentation Dossier: DO737620 Article ID: 25131 Inspection by appointment possible. Subject to change and errors.

Condition: excellent (used), Type: UF 450plus Air circulation: forced convection Temperature Temperature range: +20 °C to +300 °C Working range: at least +10 °C above ambient temperature Setting accuracy: up to 99.9 °C: 0.1 °C from 100 °C: 0.5 °C Temperature sensors: 2× Pt100 (DIN Class A, 4-wire) Interior and Capacity Volume: 449 liters Internal dimensions (W × H × D): 1040 × 720 × 600 mm Maximum number of shelves: 8 Load per shelf: 30 kg Maximum total load: 300 kg Interior: Stainless steel, all-around heating External dimensions and Weight External dimensions (W × H × D): approx. 1224 × 1247 × 784 mm Net weight: approx. 160 kg Gross weight: approx. 185 kg Electrical Data Voltage: 400 V, 3-phase Power: approx. 5800 W Control and Regulation Controller: ControlCOCKPIT TwinDISPLAY Regulator: digital PID microprocessor Timer: 1 minute to 99 days Functions: SetpointWAIT, HeatBALANCE, calibration at 3 temperature points Adjustable parameters: temperature, fan speed, exhaust flap, time programs Ventilation Hnodpfx Aasyzzm Ienek Recirculating air: adjustable in 10% increments Fresh air: electronically adjustable Exhaust air: with throttle valve Communication Interfaces: Ethernet, USB Software: AtmoCONTROL Safety Temperature limiter (TB), protection class 1 Temperature monitor/limiter (TWW/TWB) selectable ASF system for over- and under-temperature monitoring Equipment Stainless steel door with 2-point locking Stainless steel housing Low-noise air turbine Rear side with 2 feed-throughs approx. 12 cm diameter each Condition: used Scope of delivery: (see picture) (Subject to change and errors in the technical data, information is non-binding!) If you have any further questions, we are happy to assist you by phone. For detailed technical data and processing instructions, we strongly recommend consulting the original datasheets or obtaining information directly from the manufacturer.

Condition: good (used), Vötsch The unit was used for battery testing. Inert gas connection and pressure compensation flap. +Fresh air purge approx. 100 m³/h Water-cooled Model: VCZ 60006/-1/S Large-capacity chamber for temperature and climate testing Test chamber volume: approx. 7.5 m³ Interior dimensions: approx. height 1480 mm, width 2470 mm, depth 2050 mm External dimensions: approx. height 2400 mm, width 3200 mm, depth 4270 mm Test chamber floor load capacity: 3000 kg/m² Temperature testing data: Temperature range: -40°C to +160°C Hodeyzpa Nspfx Aansnk Heating rate from -40 to +100°C: approx. 1 K/min Cooling rate from +100 to -40°C: approx. 1.5 K/min Heat compensation from -40°C to +20°C: 8000 W Climate testing data: Temperature range: +10 to +80°C Humidity range: 10 to 90 % r.h. Dew point range: +5 to +77.4°C Temperature deviation over time: +/-0.1 to +/-0.5 K Humidity deviation over time: +/-3 to +/-5% r.h. Operational data: Nominal voltage: 3/N/PE AC 400V ±10% 50Hz Nominal power: 25 kW Nominal current: 41 A Weight: 3500 kg Refrigerants: R-404A / R-23 6.5 kg & 3.2 kg For your safety as a buyer, please note the following information: The following steps are performed on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. Leak test with certificate 3. After successful inspection, the chambers are subjected to a test run, monitored with calibrated instruments. Condition: used Scope of delivery: (see picture) (Technical data and specifications subject to change and errors excepted!) If you have any further questions, we would be happy to answer them by phone.

Condition: excellent (used), Year of construction: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the upgraded safety and performance test package “P Plus.” This is not a standard laboratory incubator, but rather a high-end safety test chamber specifically designed for aging, performance, and safety testing of lithium-ion energy storage systems. The device is fully functional and has been tested. It originally sustained a transport-related housing damage, which has been professionally repaired and repainted. Technically flawless – visually in very good condition 100% operational – no limitations Price advantage: €1,000 cheaper than comparable units Special Value Added: The unit is designed to reliably detect, monitor, and safely contain critical battery events – up to EUCAR hazard level 5 (fire/flames, no explosion). What exactly can the device do? (Item 2 – Performance & Application) - Aging tests on lithium-ion cells - Performance tests (charge/discharge cycles at temperature) - Long-term temperature runs and thermal cycling tests - Testing of unpowered and cyclical powered cells - Reproducible, precise temperature control throughout the entire chamber - Safe testing under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage technology Suitable for: - Battery & cell manufacturers - Research and development laboratories - Test labs & safety testing - Automotive / E-mobility / Energy storage sectors The P Plus package turns the KB 720 into a genuine battery safety test cabinet: Integrated Safety Features: - Automatic & manual CO₂ fire suppression system - Smoke detector with optical and acoustic alarm - Mechanical double-door locking (secure containment) - Spark protection inside chamber - Exhaust port with reversible overpressure valve - Connections for external inertization (e.g., nitrogen) - Emergency stop / manual trigger of suppression system - Cable feedthroughs for charging and measurement cables Result: The device is designed for testing lithium-ion cells up to EUCAR hazard level 5, where fire or flames may occur, but without explosion or uncontrolled propagation. This is not an abuse or destruction testing device, but a compliant, safe test chamber for real-world operational and fault scenarios. Technical Key Data: Temperature range: –10 °C to +100 °C Internal volume: approx. 698 liters Shelves: 4 × stainless steel Max. load per shelf: 45 kg Max. overall load: 100 kg Electrical Data: Power supply: 200–240 V AC Frequency: 50 / 60 Hz Phase: single-phase Power consumption: approx. 2.1 kW Fusing: 16 A Refrigerant: R134a Protection class: IP 20 Dimensions & Weight: External (W × H × D): approx. 1250 × 1950 × 900 mm Internal (W × H × D): approx. 970 × 1250 × 576 mm In summary – why this device is special: - Genuine battery safety test cabinet - EUCAR hazard level 5 capable - Integrated CO₂ extinguishing system - Large chamber (≈700 l) - High market and resale value Weight: approx. 285–300 kg Documents & Downloads Hodpfx Asyyw E Reanenk Condition: used Scope of delivery: (see photo) (Specifications subject to change and errors reserved!) Further questions? Please feel free to contact us by phone.

Condition: excellent (used), Year of construction: 2019, ACS Angelantoni Type: ACS WZH10-4080-2 BT Angelantoni Walk-in Climate Chamber ACS WZH10-4080-2 BT Optimized for Battery Testing (Li-Ion) -40°C to +80°C Description: For sale is a walk-in climate and environmental test chamber from the renowned manufacturer Angelantoni Test Technologies (ACS), model WZH10-4080-2 BT, year of manufacture 2019. The system is designed for demanding industrial, development, and research testing and features enhanced safety equipment specifically for battery and accumulator testing (e.g., lithium-ion). Special Feature: Safety Equipment for Battery Testing: The system is specially equipped for battery and accumulator tests, including: - Pressure relief flap for controlled release of pressure in the event of a malfunction - Gas warning system for early detection of critical gas concentrations Hodpfx Ajyyvwxsanenk - Aerosol fire suppression system (SalgroMAG) → ideal for lithium-ion testing Suitable for: - Batteries & accumulators (including lithium-ion) - Electronics & control units - Automotive components - Industrial & research testing - Endurance, ageing, and stress tests Technical Data (from nameplates & documentation): General: Model: WZH10-4080-2 BT Year of manufacture: 2019 Standards: CE, IEC/EN 60204-1 Design: Walk-in climate chamber, double-door Test Range: Temperature: –40 °C to +80 °C Humidity: 10% to 95% RH Electrical Data: Supply: 400 V, 3-phase + N + PE, 50 Hz Nominal power: approx. 37 kW Full load current: approx. 115 A Protection rating: IP54 Short-circuit resistance: 10 kA Refrigeration System: Refrigerant: R452A Charge: approx. 50 kg CO₂ equivalent: approx. 107 t Dimensions: Dimensions (external, approx.): Length: ~ 4.5 m Width: ~ 2.2 m Height: ~ 2.4 m Weight: approx. 3,800 kg Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and error!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Year of construction: 2019, ACS Angelantoni Type: ACS WZH10-4080-2 BT Angelantoni Walk-in Climate Chamber ACS WZH10-4080-2 BT Optimized for Battery Testing (Li-Ion) -40°C to +80°C Description: For sale is a walk-in climate and environmental test chamber from the renowned manufacturer Angelantoni Test Technologies (ACS), model WZH10-4080-2 BT, year of manufacture 2019. The system is designed for demanding industrial, development, and research testing and features enhanced safety equipment specifically for battery and accumulator testing (e.g., lithium-ion). Special Feature: Safety Equipment for Battery Testing: The system is specially equipped for battery and accumulator tests, including: - Pressure relief flap for controlled release of pressure in the event of a malfunction - Gas warning system for early detection of critical gas concentrations - Aerosol fire suppression system (SalgroMAG) → ideal for lithium-ion testing Suitable for: - Batteries & accumulators (including lithium-ion) - Electronics & control units - Automotive components - Industrial & research testing - Endurance, ageing, and stress tests Technical Data (from nameplates & documentation): General: Model: WZH10-4080-2 BT Hnsdpfx Aaoyyvrvenok Year of manufacture: 2019 Standards: CE, IEC/EN 60204-1 Design: Walk-in climate chamber, double-door Test Range: Temperature: –40 °C to +80 °C Humidity: 10% to 95% RH Electrical Data: Supply: 400 V, 3-phase + N + PE, 50 Hz Nominal power: approx. 37 kW Full load current: approx. 115 A Protection rating: IP54 Short-circuit resistance: 10 kA Refrigeration System: Refrigerant: R452A Charge: approx. 50 kg CO₂ equivalent: approx. 107 t Dimensions: Dimensions (external, approx.): Length: ~ 4.5 m Width: ~ 2.2 m Height: ~ 2.4 m Weight: approx. 3,800 kg Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and error!) For further questions, we are happy to assist you by phone.

Year of construction: 1995, condition: used, Temperature Chamber, Benchtop Test Chamber for Thermal Testing Hedpfx Aajyyvphonsnk Manufacturer: Heraeus Vötsch Model: HT4002 Year of manufacture: 1995 Test volume: 16 liters Temperature range: -40°C to +130°C Mains voltage: 230V Refrigerant: VK R452a Interface: RS232 Weight: 75 kg External dimensions (WxDxH): 465 x 505 x 625 mm Internal dimensions (WxDxH): 310 x 230 x 205 mm ID: ä16426

Year of construction: 2019, condition: good (used), Weiss Model: WK 10/40-80 Test chamber volume approx. 10 m³ 10 m³ = 10,000 liters Modular climate test chamber Weiss WK 10/40-80 Version: water-cooled refrigeration unit Refrigerant type: R449A Special equipment for battery testing: The climate test chamber is equipped with extended safety features for battery and accumulator testing (e.g. lithium-ion): • Pressure relief flap for controlled pressure release in the event of a malfunction • Gas warning device for early detection of critical gas concentrations • Fire suppression system with SalgroMAG aerosol extinguishing generators This equipment significantly increases safety during battery testing and supports use in development and testing environments (subject to a customer-provided safety concept / BMS). Description: For sale is a professional climate test chamber from Weiss Technik, model WK 10/40-80, year of manufacture 2019. The unit is used for temperature and climate testing and is ideally suited for industry, research, development, and quality assurance. The system allows for temperature and humidity testing across a wide range and is designed for continuous operation in industrial and development laboratories. Particularly suitable for: - Functional and service life testing - Material and component testing - Pre-aging and climate simulation - Conditioning of samples - Testing of batteries and accumulators (e.g. lithium-ion) under defined climate conditions (subject to customer safety concept / BMS) Operation is via a modern S!MPAC® control system with web panel, programs can be stored and automated. The system was in operation until recently and is fully functional. General information: Manufacturer: Weiss Umwelttechnik GmbH Model: WK 10/40-80 Year of manufacture: 2019 Condition: used, functional CE marking: available Made in Germany Control system: S!MPAC® control Web panel / touch operation Program and time control possible Temperature & Climate: Hsdpfx Aeyyu Rqoanonk Temperature range: −40 °C to +80 °C Temperature accuracy: ± 1 K Humidity range: 10 % to 95 % RH Humidity accuracy: ± 5 % Dimensions: External dimensions (W×D×H): approx. 3,300 × 5,000 × 2,500 mm Internal dimensions (W×D×H): approx. 3,000 × 2,200 × 1,500 mm Test chamber volume approx. 10 m³ Media & Systems: Spray system: water pressure 3 bar Compressed air connection: min. 5 bar Refrigerant: R449A Electrical data: Mains connection: 3/N/PE, 400 V AC ±10 %, 50 Hz Rated power: approx. 44.9 kW Rated current: approx. 74 A Weight: approx. 3,900 kg Scope of delivery: Climate test chamber Weiss Technik WK 10/40-80 Control / web panel Operating manual (German) Nameplate & documentation Condition: used Scope of delivery: (see image) (Change and errors in technical details and specifications excepted!) For further questions, please feel free to contact us by phone.

Year of construction: 2011, condition: used, functionality: fully functional, Universal Testing Machine Inspekt Table Blue 5 kN Mechanical Design: - 2 backlash-free ball screw spindles, driven by a DC servo motor, Fmax = 10 kN, stiffness 10 kN/mm - 1 test space up to nominal load: - Test space width: 420 mm - Max. test stroke without test tools, adapters, and KMZ: 1025 mm Travel Speeds: - Test speed: 0.0015 – 1000 mm/min at full load - Return speed: 1000 mm/min Force Measurement: - Measuring range: 0.8 – 100% of nominal load, Class 1 (optionally Class 0.5) (+/- 1% of the displayed value according to DIN EN ISO 7500-1) - Force measurement resolution: +/-180,000 digits at 20 ms integration time The machine is delivered with a factory test certificate. If factory or DKD calibration at the installation site is requested by the customer, this will incur additional costs. Crosshead Travel Measurement: - Incremental square-wave input with encoder monitoring, saves crosshead position - Crosshead travel resolution: 1 μm Hnodjyyu I Nspfx Aansk Dimensions (W x D x H) / Weight: - Load frame: 685 mm x 550 mm x 1420 mm / 100 kg – controller mounted on the load frame Standard Functions: - Force, displacement, and strain control - Overload protection, automatic force calibration - Specimen break detector, return function - Set-up mode via control panel with display (force, displacement) Data Processing: - USB 2.0 interface or LAN - Data transfer rate to PC: 50 Hz (standard); optionally, higher data acquisition frequency via special software add-on module - Internal data processing rate: 2 ms - Optional: up to 2 free slots for expansion cards (1-channel analog cards or 2-channel digital cards) for additional sensors Power Supply / Operating Conditions: - 115/230 VAC, 0.5 kVA, 50/60 Hz, 5–40°C, 20–80% humidity - Required options for operation: load cell, grips, PC (current standard, OS 8-10-11), test software 5000 N Load Cell - Measuring range: 5–5000 N for tension and compression, with nominal 2 mV/V output signal - Overload protection: +/-100% - Linearity: +/-0.05% - Hysteresis: +/-0.03% - Repeatability: +/-0.02% - Incl. 1.5 m connection cable and calibration certificate Supplied with Extensometer MFX 200 The MFX 200-B extensometer, with its robust construction and high measurement accuracy, is suitable for almost all specimens with an initial gauge length from 10 mm. All strains can be measured, from the modulus of elasticity up to specimen break. It can be used unrestrictedly in both the lower and upper test areas. In combination with the MFQ-A, r- and n-value measurements on sheet metal are also possible. Two different measurement systems are available, differing in their signal and technical specifications (see technical documentation).

Condition: ready for operation (used), Emco Test M4C 025 Universal Hardness Tester Hardness Testing Machine Test force range: 9.8-2450N Hedpfx Aoyybt Eeanjnk Test height: 260 mm Throat depth: 200 mm Max. workpiece weight: 50 kg Dimensions: 250 mm x 1055 mm x 750 mm (W x H x D) You are welcome to arrange an inspection appointment. We can also organise cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be provided, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop to see our other offers as well. All company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data or errors in the description of the item may occur and are subject to change.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 50 mm, travel distance Y-axis: 50 mm, A Zwick/Roell hardness tester is for sale in good, used condition, as shown in the photos. Technical specifications: • Manufacturer: Zwick / Roell • Model: ZHV-10 / PC version • Type: B3212003 • Year of manufacture: 2007 • Vickers hardness tester up to 10 kg • Load range: HV 0.2 to HV 10 • Microscope with CCD camera • With cross table: approx. 135 x 135 mm (Travel range: approx. 50 x 50 mm) • Diamond indenter: 136° • Objectives: 10 / 20 / 40 / 60 : 1 • The PC version operates with the testXpert hardness edition testing software. This software is characterized by simple operation and flexible adaptation to changing test conditions. The indentation is measured on the screen by manually or automatically drawing the measurement lines and is automatically evaluated. • Scope of delivery as shown • Condition: Used, in working order Shipping costs via freight forwarder: approx. €120 International buyers are welcome! Hedoyx Izgjpfx Aansnk You will receive an invoice with VAT shown. Viewing / pickup is possible by appointment in 42855 Remscheid. Sale from location 42855 Remscheid, ex works. Subject to errors in technical data and prior sale.

Condition: as good as new (ex-display), functionality: fully functional, overall weight: 700 kg, total length: 900 mm, total width: 2,100 mm, total height: 2,200 mm, input voltage: 400 V, input frequency: 50 Hz, compressed air connection: 5 bar, electrical fuse: 20 A, The Ring Tester is designed for automatic crack detection on ring-shaped components such as bearing races and gears, using the eddyvisor C. Additionally, customers can test for grinding burn on the inner and outer rings of roller bearings. For this purpose, a robot handles and guides the sensor precisely along the contours of the test piece. The machine conducts tests using up to two probes. All relevant scan parameters and communication for controlling the eddyvisor C are integrated into the robot’s scanning program. At the heart of the system is the eddyvisor C 2-channel eddy current tester, which ensures reliable detection of cracks and grinding burn. Process automation is managed by an integrated Stäubli TX2-60 robot. The entire system is controlled and operated via a control cabinet featuring an integrated control and operator panel. A vertical spindle with a chuck securely clamps each test part during inspection. Non-conforming parts (NOK) detected during testing are automatically sorted onto two dedicated NOK discharge lanes. A separate staging area for reference and master parts supports calibration and continuous quality assurance during testing. The system includes the Optical Reflection Sensor by ibg (iORS) for precise, non-contact inspection of rings. For further information, please visit our website. Hnjdpsyx E D Eofx Aanok

Year of construction: 2020, operating hours: 6,126 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70/5, water-cooled, 1000 liters, year of manufacture 2020, Hnsdpoyxm Ulsfx Aanok total operating hours: 6,126 h. Description: For sale is a high-quality climate test chamber from Vötsch Industrietechnik (Weiss Technik), model TempEvent T/1000/70/5. This unit is designed for the simulation of temperature conditions and is ideally suited for: - Material testing - Electronics inspections - Environmental and aging tests - Quality and endurance tests The chamber can achieve both very low temperatures down to approx. -70 °C and high temperatures up to +180 °C, and can change temperatures at a defined rate (temperature ramps). Precise control allows for reproducible testing conditions. Operation is user-friendly via an integrated touch panel. Features: - Fast temperature changes (up to 5 K/min) - Even temperature distribution in the test space - Water-cooled system - Industrial standard – robust construction - Maintenance indicator and operating hours counter included Technical Data: Model: TempEvent T/1000/70/5 Temperature range: approx. -70 °C to +180 °C Temperature change speed: up to 5 K/min High precision & stability: Temporal temperature deviation: ±0.1 to ±0.5 K → very stable temperature over time Spatial deviation: ±0.5 to ±1.0 K Temperature gradient: ≤ 2.0 K This makes the chamber ideal for demanding testing processes with high repeat accuracy. Test chamber dimensions: approx. 950 × 1100 × 950 mm (W × H × D) External dimensions: approx. 2000 × 1415 × 2030 mm (W × H × D) Side port: 50 cm / 125 cm Electrical data: 400 V / 3~ / 50 Hz Rated current: approx. 34 A Power: approx. 21 kW Refrigerants: R449A (approx. 2.9 kg) R23 (approx. 1.3 kg) Weight: approx. 1,200 kg For your security as a buyer, please note the following: The following checks are carried out on all our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) Further questions can be answered for you by phone.

Condition: excellent (used), CTS Type: CS-70/1000-5 Water-cooled Condenser For sale is a high-quality climate and temperature test chamber / environmental test chamber manufactured by CTS (Clima Temperatur Systeme), model CS-70/1000-5. This unit is used to simulate a wide range of environmental conditions and is typically employed in industry, research, and quality assurance. It enables precise testing under extreme temperature and humidity conditions, suitable for: - Material testing - Aging tests - Electronics and component testing - Climate and environmental simulation Thanks to the large test chamber (1000 liters) and advanced control technology, both rapid temperature changes and steady long-term tests can be performed. The system is water-cooled, ensuring stable and efficient operation. Technical data: Control: - Multi-touch controller with integrated program generator - Programmable test sequences - Side cable port: 50 cm / 125 cm Temperature range: - Temperature: –70°C to +180°C - Heating rate: approx. 6 K/min - Cooling rate: approx. 5 K/min - Temperature constancy: ± 0.3 K Climatic data (humidity): - Climate temperature range: +10°C to +95°C - Humidity range: 10% to 98% rH - Humidity stability: - Range I: ± 1.5% rH - Range II: ± 3% rH Hnsdpeyxmi Asfx Aansk - Dew point range: - I: +7°C to +94°C - II: –10°C to +7°C Dimensions: - Exterior (HxWxD): 1950 x 1270 x 2245 mm - Interior (HxWxD): 900 x 1000 x 1100 mm - Test chamber volume: 1000 liters Electrical data: - Connection: 400 V, 3/N, 50 Hz - Tolerance: +6% / –10% - Connected load: approx. 16.4 kW - Rated current: approx. 26.8 A Refrigeration system: - Refrigerant: R404A & R23 - Weight: approx. 900 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented trial run. Condition: used Scope of supply: (see photo) (Technical data and specifications subject to change and error!) For further questions, you are welcome to contact us by phone.

Condition: excellent (used), Weiss Weiss Climate Test Chamber WKL 100/70 -70°C to +180°C, Humidity, 100 Litres Compressor has been replaced! Air-cooled For sale is a professional climate test chamber from Weiss Umwelttechnik. This equipment is ideal for material testing, climate tests, as well as temperature and humidity simulation in industrial environments, laboratories, or R&D. The test chamber provides precise test conditions for extreme temperatures and high humidity levels. Data for Temperature Testing: - Temperature range: -70 to +180°C - Temporal temperature deviation at the centre of the usable space: ± 0.3 to ± 1 K - Spatial temperature uniformity (based on setpoint, range tmin to +150°C): ± 0.5 to ± 2 K - Temperature change rate: Heating 3.5 K/min, Cooling 3.5 K/min - Heat compensation: max. 700 W Data for Climate Testing: - Humidification system: - Reservoir capacity: approx. 13 l - Water quality: demineralised - pH value: 6 – 7 - Conductivity: max. 20 μS/cm - Water consumption at constant temp. +40°C, 92% r.h.: 2 l / 24 h - Temperature range: +10 to +95°C - Humidity range: 10 to 98% r.h. - Temporal temperature deviation at the centre of the usable space: ± 0.3 to ± 0.5 K - Spatial temperature uniformity (based on setpoint): ± 0.5 to ± 1.5 K - Temporal humidity deviation at centre: = 1 to ±3% r.h. Internal dimensions: Height 400 mm, Width 470 mm, Depth 345 mm External dimensions: Height 1776 mm, Width 745 mm, Depth 980 mm Mechanical Load Data: - Maximum load of test compartment floor: 10 kg - Per shelf: 10 kg - Total rack load: 50 kg Hedeyw Nnfjpfx Aanenk Operating Data: - Test compartment lighting: Halogen bulb 24V, 50W - Rated voltage: 1/N / PE AC 230V ±10% 50 Hz - Rated power: 3.5 kW - Rated current: 15.2 A - Customer-side fuse: 16A slow-blow - Protection rating: Control cabinet IP 22 and touch panel IP 54 Heat Dissipation (air-cooled chambers): - Max. heat output to environment: 2500 W Noise Level: - Sound pressure level (free-field measurement at 2 m in front, 1.0 m height): approx. 59 dB(A) Feedthrough: 50 mm ∅ Interfaces: Ethernet interface (RJ45), USB interface Refrigerants: R404A / R23 Test chamber volume: approx. 100 litres Weight: 210 kg Important Information for Buyers: For your safety, we perform the following steps before sale of our chambers: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certification 4. After successful testing, each chamber undergoes a documented trial run. Condition: used Scope of delivery: (see picture) (Specifications and information may be subject to change and error!) Feel free to contact us by phone for any further questions.

Condition: used, functionality: fully functional, overall weight: 50 kg, Offered is a mechanical Rockwell hardness tester for HRC measurements. Hnsdpfx Aoyw Hzijanok The device comes from our quality assurance inventory and has been regularly maintained. The last documented calibration was performed by a specialist company in May 2020. Since then, the device has not been in productive use. This tester is ideally suited for workshops, toolmaking, or maintenance departments looking for a robust and reliable hardness testing solution. Technical Specifications: - Test method: Rockwell (HRC) - Mechanical force application - Selectable test force levels (see nameplate) - Heavy-duty construction - Stable test table with fine-thread spindle - Analog display Condition: - Used - Good visual condition - Complete - Last calibration: 05/2020 - Currently without valid calibration certificate Business Note: Mechanical Rockwell testers of this design are extremely durable and require minimal maintenance. The price offered enables an economical entry into hardness testing – significantly below the cost of modern new equipment. Location: Eisenach Collection preferred (high weight), loading by arrangement possible. Sale is made excluding any warranty or liability for material defects. The device is sold as seen.

Year of construction: 2014, condition: used, functionality: fully functional, machine/vehicle number: 13RO210, We are offering this used Oxford Instruments PMI-MASTER Pro mobile spectrometer, year of manufacture 2014. Model year: 2014 Hnodpjywwr Ssfx Aanjk Input voltage: 24 V DC Power: 500 VA The spectrometer was originally purchased new by us, has always been serviced by Oxford Instruments Analytical GmbH, and is in good, working condition. Last maintenance: 09/2024. The device was in operation until 09/2025. If you have any questions or require further information, please send us a message or give us a call.