TAK- Werkzeugmaschinen und Anlagen Vertriebs GmbH

TAK- Werkzeugmaschinen und Anlagen Vertriebs GmbH from Friedrichsdorf / Taunus

Willkommen bei TAK Werkzeugmaschinen und Anlagen Vertriebs GmbH.

Wir beschäftigen uns ausschließlich damit, italienische und tschechische Werkzeugmaschinen exklusiv als Generalvertretung in Deutschland, Österreich, Ungarn und Tschechien zu vertreiben. Unser mittelständiges Unternehmen verfügt über eine jahrzehntelange Erfahrung im Verkauf sowie Service und Ersatzteilbeschaffung. Durch Flexibilität und Vertragstreue sind wir bemüht, die Anforderungen und Bedürfnisse unserer Kunden schnell und unbürokratisch zufriedenzustellen. Nicht die Masse, sondern die Qualität der Produkte macht den Unterschied. Zu unseren Kunden zählen namhafte Hersteller der Automobil-Industrie, der Luft- und Raumfahrtindustrie, der Schwerindustrie, des Modell- und Formenbaus, sowie des Werkzeugbaus.

Serviceleistungen

Messung von Maschinen
· Geometrievermessung der Maschine mit kalibrierten Messmitteln nach Hersteller-Vorgaben oder nach DIN für Werkzeugmaschinen · Laservermessung der Maschine mit einem Laser-Interferometer zur Prüfung der Positioniergenauigkeit der Maschine

Wartung und Instandhaltung
· Wartungsdurchsicht der Maschine nach Herstellerangaben · Instandhaltungsarbeiten und Erneuern von Verschleißteilen · Modernisierung und Erweiterungen an Maschinen · Umzüge von Maschinen und Anlagen · Neuinbetriebnahme von Werkzeugmaschinen · Schulungen für Maschinenbediener

Reparaturarbeiten
· Reparaturservice aller Fabrikate · Fehleranalyse · Beschaffung von Ersatzteilen, sowie Austausch von defekten Teilen · Notdienst-Reparaturservice bei Maschinenkollision

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

Welcome to TAK Werkzeugmaschinen und Anlagen Vertriebs GmbH

as a general agency with its own service for machine tools and plants, active on the German market for more than 30 years, we introduce ourselves to you.

We are exclusively engaged in selling Italian and Czech machine tools exclusively as general agency in Germany, Austria, Hungary and the Czech Republic. Our medium-sized company has decades of experience in sales, service and spare parts procurement. Through flexibility and contract loyalty we strive to satisfy the requirements and needs of our customers quickly and unbureaucratically. It is not the mass but the quality of the products that makes the difference. Among our customers are well-known manufacturers of the automotive industry, the aerospace industry, heavy industry, model and mould making as well as tool making.

Mr Horst Keiling
Industriestraße 22
61381 Friedrichsdorf / Taunus
Germany
Hessen

Current offers from similar dealers

Listing

Machining Center - Vertical HYUNDAI WIA KF4600 II

Lüneburg

1,237 km

Machining Center - Vertical
HYUNDAI WIAKF4600 II

Call

Condition: used, Year of construction: 2021, functionality: fully functional, Control: FANUC 0i x-travel: 900 mm y-travel: 460 mm z-travel: 520 mm Table dimensions (LxW): 1.050 x 459 mm max. table load: 600 kg rapid travel x/y/z: 36 / 36 / 36 m/min max. spindle speed: 8.000 rpm Tool magazine for 30 + 1 tools chip conveyor Hfodpfsykau Usx Afnsc Hand-held spray gun with coolant RENISHAW touch and spindle probe

See details

Listing

Vertical machining center Hedelius BC 40 D

Nienhagen

1,229 km

Vertical machining center
HedeliusBC 40 D

Call

Condition: used, Year of construction: 1998, functionality: fully functional, Manufacturer/Model: MÖSSLANG DK 101-52 Year of manufacture: 2012 Condition: Very good Location: Germany Delivery/loading possible. Chip conveyor type KB300BC 40 Z travel: 400 mm Max. workpiece weight between centers: 500 kg X travel: 1700 mm Y travel: 400 mm Control: Heidenhain TNC 410 Table size (L x W): 1100 x 420 mm Taper: 69871 A 40 Tool changer positions: 20 Spindle power: 16.25 kW Hedoyi U Tpspfx Afnsfc Speed range: 10–6000 rpm

See details

Listing

Vertical machining center Putsch Meniconi Kopernic

Scerne

2,032 km

Vertical machining center
Putsch MeniconiKopernic

Call

Condition: new, Year of construction: 2026, functionality: fully functional, • Working area in X – Y – Z mm: 4,200 – 1,600 – 100 • Continuous worktable • Lateral and rear reference stops • Gantry-type machine with dual-drive Gantry system Hfedpfeyi Hl Dox Afnsc • Milling unit with 4-axis electrospindle, brand HSD • Saw unit for 360° cutting via HSD electrospindle • Air cooling • ISO 30 tool holder • Inverter • 10-position tool magazine • Control system: OSAI • Software • Easy programming • File import capability • Remote control panel/console • Teleservice and video diagnostics: real-time solutions • Automatic guide lubrication • Lateral safety guards for the unit • Machine documentation: user and maintenance manual, software manual, spare parts catalog, electrical diagram, CE declaration of conformity.

See details

Listing

CNC milling machine, 6-axis AXA VHC2 2360-XTS / 50

Burgoberbach

1,385 km

CNC milling machine, 6-axis
AXAVHC2 2360-XTS / 50

€50,000

fixed price plus VAT

Call

Condition: excellent (used), Year of construction: 2008, operating hours: 50,236 h, functionality: fully functional, travel distance X-axis: 2,360 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 9,000 rpm, For sale is a 6-axis machining center from AXA, model VHC 2-2360-XTS / 50. The machine is in good condition and fully operational, used primarily for light machining such as aluminum. Notably, each of the two NC tables allows for workpiece clamping up to Ø1,100 mm (see drawing). A fixed milling table can also be mounted. High-speed spindle insert SK50 is available for this machine. Technical data: Year of manufacture: 2008 Control: Heidenhain iTNC 530 Operating hours: 50,236 Spindle hours: 16,319 X-axis: 2,360 mm Y-axis: 600 mm Z-axis: 800 mm Spindle taper: SK 50 Spindle power: 56 kW Torque: 355 Nm Tool changer: 52 positions (2 chains) NC rotary tables (2 units) Type: SKH-NC 7/T Table diameter: Ø 630 mm Max load: 750 kg Clamping: Hydraulic Dimensions: 5,650 mm × 3,700 mm × 3,200 mm Weight: approx. 22,000 kg Equipment includes: 50 bar high-pressure coolant system, band filter, Heidenhain RCN 729 measuring system, Renishaw OMP 60 3D probe, electronic handwheel, 2x Visiport (viewing windows), chip conveyor. Tool holders are not included in the offer, but may be provided at additional cost. Transport and loading can be organized throughout Europe for an additional fee upon request. All prices are subject to VAT. Inspection by appointment is possible. Please contact us; our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase/sale BUYING & SELLING OF PRODUCTION AND METALWORKING MACHINES, AND MORE. Hfjdpfx Aeyi Er Ajfnec Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website.

See details

Listing

Italy

1,192 km

CHIRON MILL 2000
CHIRONMILL 2000

Call

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 550 mm, controller manufacturer: SIEMENS, controller model: Sinumerik, table width: 550 mm, table length: 2,600 mm, spindle speed (max.): 12,000 rpm, number of axes: 4, This CHIRON MILL 2000 Vertical Machining Center was manufactured in the year 2003. It is equipped with a Siemens Sinumerik control unit. The machine has a spindle speed of 12000 rpm. Additional equipment • Chip conveyor Hedpfxjyi Eh Do Afnefc Machine Benefits Technical Machine Benefits • Rapid feed 40 m/min • Tool magazine with capacity for 24 tools

See details

Listing

Machining Center - Vertical HEDELIUS BC 100-3500

Germany

1,279 km

Machining Center - Vertical
HEDELIUSBC 100-3500

Call

Condition: used, Year of construction: 2001, Technical details: x-travel: 3500 mm y-travel: 1000 mm z-travel: 750 mm control: Heidenhain TNC 460 table surface area: 4150 x 1000 mm table height over floor: 950 mm Workpiece weight approx.: 4000 kg distance spindle /table: 120-870 mm spindle taper ISO: 50 tool diameter: 100 mm no. of tools in magazin: 30 Tool diameter with no neighbouring tools: 125 mm tool length - max.: 330 mm Spindle RPM: 20-8000 1/min Spindle power: 50 kW feed speeds: 1- 15000 mm/min rapid traverse: 30 m/min weight of the machine ca.: 21 t dimensions of the machine ca.: 8 x 4 x 3,7 m total power requirement: 40 kW Accerories Electronic handwheel large vertical machining center with CNC HEIDENHAIN TNC 426 control and hand wheel HR410 30-pockets autom. toolchanger Hfsdpsyi Dxzsfx Afnoc coolant system and chip conveyor additional fixture bridge on machine table *

See details

Listing

Vertical machining center Mazak VTC-300C-II

Anderlecht

903 km

Vertical machining center
MazakVTC-300C-II

€26,200

ONO plus VAT

Call

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 660 mm, spindle speed (max.): 12,000 rpm, Thanks to regular maintenance checks, this machine is in good working condition. - Mazak control unit - Mazatrol Fusion 640 M - One spindle - Spindle speed: 12,000 rpm - X-Y-Z-axis travels: 1,740 mm / 760 mm / 660 mm - Table outer length: 2,000 mm - Table outer width: 760 mm - Internal coolant supply Hfsdpfxeyiy Ifo Afnjc - Additional equipment: Tool magazine - Dimensions (width x depth x height): 3,300 mm x 4,100 mm x 2,400 mm – Weight: 11,500 kg

See details

Listing

CNC - Machining Center 5 - Axis AUERBACH IA 5B 3200 RT

Halberstadt

1,309 km

CNC - Machining Center 5 - Axis
AUERBACHIA 5B 3200 RT

Call

Condition: good (used), Year of construction: 2005, Ref. -No.: 10627 Manufacturer: AUERBACH Type: IA 5B 3200 RT Year of construction: 2005 Type of control: CNC Control: Heidenhain 530 Storage location: Halbrstadt Country of origin: Germany X-Travel: 3200 mm Hjdpfx Asyiyg Ujfnefc Y-Travel: 2000 mm Z-Travel: 1600 mm B-Axis: 360 ° C-Axis: 360 ° Spindle Taper: SK 50 Rotary Table (Lxw): 2500 x 2000 mm Table Load: 20.000 kg Tool Piece Magazine With: 100 Pcs./pcs. Operating hours: 75.377 H Spindle hours: 28.246 H Machine length: 7300 mm Machine width: 7700 mm Machine Height: 4350 mm Weight Of The Machine Ca.: 28 t Further information: - with H / V head Machine can be viewed under power by arrangement

See details

Listing

Vertical machining center MAZAK VTC 20 B

Mögglingen

1,367 km

Vertical machining center
MAZAKVTC 20 B

Call

Listing

Travelling column machining center Hedelius CB 80 – 2300

Hamburg

1,205 km

Travelling column machining center
HedeliusCB 80 – 2300

€24,000

fixed price plus VAT

Call

Condition: ready for operation (used), Year of construction: 2003, Immediately available due to business liquidation: Hedelius CNC travelling column machining centre Type CB 80 – 2300 Hfedpfoyitmhex Afnoc Year of manufacture: 2003 CNC control: Heidenhain iTNC 530 Very few spindle hours: 11,500 h Table: 2900 x 750 mm Travel (X/Y/Z): 2300 / 800 / 600 mm Table load capacity: 2800 kg Distance spindle to table: 10 – 740 mm Spindle: SK 40 Tool magazine: 30 stations Spindle speeds: 30 – 8000 rpm Feed rates: 0 – 3000 mm/min on all axes Drive power: 25 kW Weight: 13 t Price: EUR 24,000 plus VAT ex location

See details

Listing

Vertical machining center NORTE VS 500 SPEED

Eilenburg

1,428 km

Vertical machining center
NORTEVS 500 SPEED

Call

Condition: good (used), Year of construction: 1999, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, Control: SIEMENS 840D x-travel: 2000 mm y-travel: 500 mm z-travel: 500 mm feed: 1 - 8000 mm/min table size: 2120 x 550 mm table load: 2000 kp rapid traverse X-axis: 40 m/min rapid traverse Z-axis: 20 m/min tool taper: HSK 63 A spindle speeds - continuously variable: 0 - 15000 rpm spindle drive: 20 kW spindle bearing diameter: 70 mm position accuracy: 0.020 mm Control: SIEMENS 840D Tool diameter: 63 / 126 mm Tool magazine: Chain magazine: 40 pieces Total power requirement: 65 kVA Hfjdpfxoyipuzo Afnjc Accessories: Chip conveyor

See details

Listing

Vertical machining center FORTE 7 NEO 2600 HEDELIUS

Czech Republic

1,781 km

Vertical machining center
FORTE 7 NEO 2600HEDELIUS

Call

Listing

Wele RB - 212 (2016) Wele RB - 212 (2016)

Spain

1,192 km

Wele RB - 212 (2016)
WeleRB - 212 (2016)

Call

Condition: ready for operation (used), Year of construction: 2016, operating hours: 16,595 h, travel distance X-axis: 2,120 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, overall weight: 18,000 kg, number of axes: 3, This 3 axes Wele RB - 212 was manufactured in 2016. It features an impressive X-Axis travel of 2120 mm, Y-Axis travel of 1200 mm, and Z-Axis travel of 800 mm. The machine is equipped with a Heidenhain iTNC 530 CNC system and can support a maximum weight of 3500 kg on its 2000 mm x 1100 mm table. Consider the opportunity to buy this Wele RB - 212 vertical machining center. Contact us for further details. • Table size: 2000 x 1100 mm • Spindle taper: ISO 50 • Spindle speed: 10000 rpm • Spindle hours: 16595 h • Number of tools: 60 • Distance between columns: 1300 mm • Distance spindle to table: 150–950 mm Additional equipment Hedpfx Ajyidxxsfnsfc • Blum laser tool measurer • Blum TC50 probe • External coolant 40/80 bar • Air conditioning

See details

Listing

Vertical machining center Hedelius RS 605 Magnum

Karlsbad

1,270 km

Vertical machining center
HedeliusRS 605 Magnum

Call

Condition: good (used), Year of construction: 2012, - Heidenhain iTNC 530 MC 422 control - Integrated rotary-swivel unit and fixed machine table - 5-axis simultaneous machining - Clamping area, rotary table Ø600 mm - Travel distances: X=1320 mm, Y=650 mm, Z=520 mm - Spindle speed up to 14,000 rpm - Tool holder SK 40 DIN6987 - 30-position tool changer - IKZ – high-pressure coolant system - Electronic touch probe - Toolsetter M&H 35.70 - Work area partition wall Hfjdpfx Afjyialbsnjc - Full enclosure - Chip conveyor - 2 chip carts - Workbench with hand tools - Steel sheet cabinet - Approx. 90 various tool holders - Various accessories and spare parts - Documentation

See details

Listing

3-axis CNC (VMC) Hedelius C60PM-2000 Hedelius C60PM-2000

Babberich

984 km

3-axis CNC (VMC) Hedelius C60PM-2000
HedeliusC60PM-2000

Call

Condition: excellent (used), Year of construction: 2010, total height: 3,300 mm, total length: 5,600 mm, total width: 4,300 mm, table load: 2,000 kg, overall weight: 10,500 kg, Spindle SK 40 Speeds 8000 Rpm with 165 Nm Workload 2000 Kg ATC 56 Positions Hours spindle 10.304 Closed housing with automatic top door IKZ Coolant system Hedpfoyh U E Hox Afnofc LTA Air Cleaning Length:5600mm Width:4300mm Height:3300mm Weight:10500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

See details

Listing

Sankt Leon-Rot

1,259 km

Vertical machining center
AXAVPC 45 U

Call

Condition: excellent (used), Year of construction: 2014, operating hours: 40,000 h, functionality: fully functional, I am pleased to offer you a very well-maintained, nearly new AXA VPC 45 U. The machine is available immediately. An on-site inspection under power and in operation is possible at any time, and video footage is available. Machine hours (ON): approx. 40,000 Spindle hours (ON): approx. 25,000 Hfsdpfx Aeyh Nrzefnsc Travel ranges (linear axes): X-axis: 2,940 mm Y-axis: 1,400 mm Z-axis: 900 mm 5-axis simultaneous machining: This machine is a true 5-axis machining center, enabling simultaneous 5-axis milling with X/Y/Z + B-axis (stepless swivel head) + C-axis (NC rotary table). This allows workpieces to be machined in a single setup with continuous movement from various spatial orientations. Machine (basic data) Machine type: Vertical gantry machining center Manufacturer: AXA Entwicklungs- und Maschinenbau GmbH Model: VPC 45 U Year of manufacture: 2014 General technical data Overall length: 6,800 mm Overall width: 3,600 mm Overall height: 4,100 mm Total weight: 29 t Electrical data Connection voltage: 3×400 V / 230 V / N / PE, 50 Hz Connected load: 69 kVA Main fuse: max. 125 A Control voltage: 24 V Spindle Spindle design: Hollow shaft motor, water-cooled Speed range: 30–10,000 rpm Tool holder: SK40 Drive motor: DME 112 AL-4FGS (Kessler) Max. power at 40% duty cycle: 40.0 kW Max. power at 100% duty cycle: 26.6 kW Max. torque at 40% duty cycle: 191.0 Nm Max. torque at 100% duty cycle: 127.0 Nm NC rotary table Rotary table: RTA 6S-1500 Table diameter: Ø 1,500 mm Weight: 2,700 kg Max. payload (vertical rotary axis): 10,000 kg Tool changer Tool changer: Type M Number of tools: 100

See details

Listing

Italy

1,192 km

C.B. Ferrari GT2000
C.B. FerrariGT2000

Call

Condition: ready for operation (used), Year of construction: 2019, operating hours: 5,590 h, travel distance X-axis: 2,000 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 850 mm, spindle speed (max.): 16,000 rpm, spindle motor power: 64,000 W, number of axes: 5, This 5s C.B. Ferrari GT2000 vertical machining centre was manufactured in 2019. It features a 5-axis CNC control with a Heidenhain TNC 640, offering extensive travel capabilities of 2,000 mm on the X-axis and 850 mm on the Z-axis. The machine includes a 30-position rotary tool magazine and an electrospindle with a speed of 16,000 rpm. Consider the opportunity to buy this C.B. Ferrari GT2000 vertical machining centre. Contact us for further details. • Continuous head support • Spindle: • Type: Electrospindle • Tool interface: HSK-A63 • Torque: 170 / 236 Nm • Tool system: Hfjdpfx Asyh Nb Nefnsc • Tool magazine: 30 positions, rotary type • Table: • 1-axis rotary table • Table size: 1,840 mm • Cooling & lubrication: • Spindle cooling with emulsion • High-pressure coolant system: 75 bar • Coolant tank capacity: 460 liters • Air cooling system • Ball screw lubrication for high production Additional equipment • Chip conveyor • Heidenhain remote handwheel • Wash-down gun with pump • Mechanical probing device • 3D probe pre-installation • Electrical pre-installation for 3D probe • Industry 4.0 preparation package • Air-cooled spindle refrigeration unit • Frequency inverter for spindle – option 42

See details

Listing

Vertical machining center MAZAK VORTEX 1400/160 II FANUC EZ

Moncé-en-Belin

852 km

Vertical machining center
MAZAKVORTEX 1400/160 II FANUC EZ

Call

Listing

Vertical machining center Pinnacle DV 1432

Nitra

1,922 km

Vertical machining center
PinnacleDV 1432

Call

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 16 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 50 kVA, controller manufacturer: Fanuc α 30/3000i 7.0, workpiece length (max.): 4,000 mm, workpiece width (max.): 1,350 mm, workpiece weight (max.): 8,000 kg, total height: 4,500 mm, total length: 8,130 mm, total width: 4,150 mm, table width: 1,200 mm, table length: 3,200 mm, table load: 8,000 kg, overall weight: 17,000 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 18,500 W, mount diameter: 50 mm, tool length: 350 mm, tool diameter: 127 mm, tool weight: 20 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Pinnacle DV 1432 Hsdpfx Aoyhpcvefnjfc

See details

Auction

Vertical machining center CHIRON FZ 18 L

Bern

1,304 km

Vertical machining center
CHIRONFZ 18 L

€5,000

To the auction

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 194-03, travel distance X-axis: 2,000 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, table width: 450 mm, table length: 2,280 mm, TECHNICAL DETAILS Travel X-axis: 2,000 mm Travel Y-axis: 400 mm Travel Z-axis: 425 mm Hfjdpfx Asyhnfcofnjc Total number of axes: 3 Table length: 2,280 mm Table width: 450 mm Number of T-slots: 3 T-slot spacing: 150 mm T-slot width: 18 mm Spindle speed: 10,500 rpm Number of tools: 20 Tool diameter: 65 mm Diameter with free adjacent slots: 180 mm Max. tool length: 220 mm Max. tool weight: 8 kg MACHINE DETAILS Control: SIEMENS SINUMERIK 810 M Connection: 50 Hz 3x 400 Volt Spindle motor: 18 kW Total power requirement: 31 kVA Dimensions & Weight Dimensions (L x W x H): 4,000 x 3,010 x 3,040 mm Machine weight approx.: 7,200 kg EQUIPMENT Coolant system Chip conveyor Electronic handwheel

See details

Auction

Vertical machining center HEDELIUS CB 80 / 3200

Niedersachsen

1,037 km

Vertical machining center
HEDELIUSCB 80 / 3200

€19,000

To the auction

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 026694, travel distance X-axis: 3,200 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain iTNC 530i, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 3,200 mm Travel Y-axis: 800 mm Travel Z-axis: 600 mm Spindle mount: SK40 Speed: 50 – 12,000 rpm Number of tools in magazine: 30 pcs Hfedpfx Afsyg D Evonjc Table clamping surface: 3,900 x 750 mm Rapid traverse x/y/z: 12/12/12 m/min MACHINE DETAILS Control: Heidenhain iTNC 530i Total power requirement: 29 kW Dimensions & weight Space required: approx. 7,200 x 3,500 x 3,100 mm Machine weight: approx. 15,000 kg EQUIPMENT Chip conveyor 30-position tool changer High-pressure belt filter system Through-spindle coolant (IKZ) 15 bar SK40 tool holders Operating manual

See details

Listing

Germany

1,192 km

Matec HV 30
MatecHV 30

Call

Condition: ready for operation (used), Year of construction: 2007, operating hours: 5,577 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,100 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis Matec HV 30 was manufactured in 2007, featuring a Heidenhain iTNC 530 control, a new spindle installed in August 2021 with 5,577 hours, and a spindle speed of 12,000 rpm SK40. It offers X-axis travel of 3000 mm, Y-axis travel of 1000 mm, and Z-axis travel of 1100 mm. Consider the opportunity to buy this Matec HV 30 vertical machining centre. Contact us for more information about this machine. • Operating hours: 83,000 h • Total spindle hours: 32,800 h • New spindle installed: Aug 2021 → current spindle hours: 5,577 h • Material history: ~95% aluminum machining • B-axis: ±105° • C-axis: 360° • Handwheel • Tool magazine: 60 positions, SK40 • Internal coolant supply Additional equipment • Oil mist extraction • Renishaw probe Technical Specification Taper Size SK 40 Hfjdpfx Aoyfunrjfnsc

See details

Listing

Drachten

952 km

Vertical machining center
MazakVTC 300C II

Call

Condition: good (used), Year of construction: 2007, Used Mazak Machining Center X-axis travel: 1,740 mm Y-axis travel: 760 mm Z-axis travel: 660 mm Rapid traverse X-axis: 36 m/min Rapid traverse Y-axis: 36 m/min Rapid traverse Z-axis: 36 m/min Table size: 2,000 x 760 mm Table load capacity: 1,400 kg Distance from table surface to spindle nose: 160 mm - 840 mm Including magnetic table Spindle speed: 12,000 rpm Main drive power (5 min rating): 18.5 kW Main drive power (30 min rating): 11 kW Tool changer: Number of stations: 30 Spindle taper: SK 40 Max. tool diameter: 80 mm Hedpfx Ajyfmz Djfnjfc Max. tool diameter with adjacent stations empty: 110 mm Max. tool length: 350 mm Max. tool weight: 8 kg Control: Mazatrol 640M Interfaces: RS232, LAN, floppy disk drive Dimensions & Weight: Dimensions (L x W x H): 4,435 x 3,300 x 3,442 mm Machine weight: 12,000 kg Included: Various tools + Renishaw probe Documentation/manual Chip conveyor Partition for pendulum machining Electronic handwheel EIA / ISO programming Synchronous tapping Through-spindle coolant 5 bar A complete, very good machine, immediately available!

See details

Listing

Germany

1,192 km

HEDELIUS T8 - 2300
HEDELIUST8 - 2300

Call

Condition: ready for operation (used), Year of construction: 2006, operating hours: 7,647 h, travel distance X-axis: 2,300 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, overall weight: 18,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 26,500 W, tool weight: 10,000 g, number of axes: 5, This 5-axis HEDELIUS T8 - 2300 was manufactured in 2006, featuring a robust vertical machining center design. It boasts a large travel range of 2300/800/850 mm and a high spindle speed up to 12,000 rpm. The machine includes a B-axis NC swivel head, a 40-position tool magazine, and supports a maximum workpiece weight of 2500 kg. Consider the opportunity to buy this HEDELIUS T8 - 2300 vertical machining center. Contact us for more information. • NC swivel head B-axis: +92° / -92° • Max pendulum operation: 2 × 850 mm • Rapid traverse: 60 m/min • Feed force: X/Y 5000 N, Z 9000 N • Spindle: • Max torque: 158 Nm • Front spindle bearing diameter: 70 mm • Tool clamping (pull-in force): 12 kN • Tool magazine/changing: • Tool positions (standard): 40 • Tool positions (Magnum): 80 • Max tool diameter: 125 mm (180 mm with adjacent positions empty) • Max tool length: 330 mm • Tool change time (approx.): 3.5 s • Chip-to-chip time: vertical 6.0 s / horizontal 6.5 s • Table/capacity: • Fixed table (L×W): 2000 × 920 mm • T-slots: 6 × 18 H12 • Rotary table: 1 × 18 H8 • Max. workpiece weight: 2500 kg • Machining capacities: • Drilling in St 52 with carbide: 40 mm • Tapping: M24 • Milling in St 52: 500 cm³/min • Distances (reference): • Z travel vertical (L2): 850 mm • Spindle nose to swivel axis (L3): 300 mm • Spindle nose to table surface (L4): 40 mm • Z travel horizontal (L5): 1000 mm • Spindle axis to table surface (L6): 210 mm • Y travel (L7): 800 mm • Table center to travel start/end (L8/L9): 400 / 400 mm • Power/weights: • Total connected load: 25 kVA • Machine weight (standard): approx. 17,000–17,500 kg • Hours: • Operating hours: 21,100 h Hsdpoyfiapsfx Afnjfc • Spindle hours: 7,647 h Additional equipment • Chip conveyor • Internal coolant through spindle, 40 bar • Paper belt filter • Oil and emulsion mist separator • Rotating viewing windows (2) • Cleaning guns (2) • Renishaw touch probe Technical Specification Taper Size SK 40

See details

Auction

Vertical machining center Mazak MTV-815/80

Hessen

1,201 km

Vertical machining center
MazakMTV-815/80

Details

Condition: ready for operation (used), Year of construction: 2006, operating hours: 32,790 h, functionality: fully functional, travel distance X-axis: 2,032 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 750 mm, table load: 3,000 kg, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Travel X-axis: 2,032 mm Travel Y-axis: 750 mm Travel Z-axis: 750 mm Max. workpiece height: 870 mm Max. table/workpiece load: 3,000 kg Table width: 800 mm Table length: 2,240 mm Hodoyfhdyjpfx Afnsfc Spindle speed: 40 – 6,000 rpm Spindle taper: SK 50 Standard spindle power: 18.5 kW Standard torque: 759 Nm Spindle power (optional): 26 kW Torque (optional): 1,067 Nm MACHINE DETAILS Control unit: MAZATROL Dimensions & Weight Dimensions (L x W x H): 5,685 mm x 4,096 mm Weight: 14,000 kg Operating hours: 32,790 h

See details