P.S.T GmbH
P.S.T GmbH from Bretten
This dealer has not yet provided a company description.
Mr Andreas Grotz
Im Weißhofer Grund 1/2
75015 Bretten
Germany
Current offers from similar dealers
Listing
Hessisch Lichtenau
1,244 km
CNC press brake, die bending machine, press brake, sheet metal bending machine, bending bench, die b
BEYELER - BYSTRONICPR 8 (2500 kN x 3100 mm)
BEYELER - BYSTRONICPR 8 (2500 kN x 3100 mm)
Call
Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm)
Serial No. Year of manufacture: 2001
Press capacity: 250 tons
Working length: 3100 mm
Stroke: 365 mm
Frame gap: 410 mm
Clearance between side frames: 2750 mm
Table width: 100 mm, 200 mm with table extension
Table height above floor: 840 mm
Backgauge X-axis travel: 620 mm
Backgauge R-axis travel: 240 mm
Approach speed: 200 mm/s
Working speed: 1-10 mm/s
Y-axis rapid traverse: 200 mm/s
Y-axis working speed: 1-10 mm/s
Y-axis return speed: 135 mm/s
Oil capacity: approx. 400 liters
Motor power: 18.5 kW
Connected load: approx. 25 kW
Power supply: 400 Volt, 50 Hz, 50 Amp.
- 8-axis CNC Control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2
- 2 freely programmable stop fingers, movable laterally (Z1+Z2)
Itjdpfx Aoya Iaqog Ujb
- Backgauge (X-axis 620 mm) with 3 stop points up to max. 1080 mm
- Press beam with servo valves and measuring system Y1 and Y2
- FIESSLER AKAS safety light barrier
- Operation via electrical foot switch and/or two-hand control panel
- Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot
- Tool holder for the lower tool, height 160 mm x width 60 mm, with 14 x 23 mm locating slot
- TRUMPF tool system, without tooling
Dimensions L x W x H: 0 x 2500 x 3400 mm
Machine height: 3350 mm (max. height 3400 mm)
Weight: 17,000 kg
In good condition
Listing
Horten
1,327 km
Hydraulic press brake
Mach-XMX-PB250T-3200
Mach-XMX-PB250T-3200
Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: MX-PB250T-3200, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: Delem, controller model: DA53TX, bending force (max.): 250 t, working width: 3,200 mm, throat depth: 400 mm, distance between stands: 2,700 mm, installation height: 460 mm, operating speed: 8 mm/s, reverse speed: 140 mm/s, number of axes: 5, oil tank capacity: 220 l, travel distance X-axis: 500 mm, overall weight: 14,500 kg, total length: 3,800 mm, total width: 1,950 mm, total height: 2,900 mm, power: 18.5 kW (25.15 HP), input voltage: 380 V, input frequency: 50 Hz, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, emergency stop, finger protection, foot remote control, lower tooling, upper tooling, Press brake is capable of efficiently processing a wide range of metal plates, including mild steel, stainless steel, aluminum alloys, and other ductile metals, it control the upper die and bottom die to bend the metal sheet in different required shapes. It typically handles plate thicknesses from 1mm to 20mm, plate length from 1600mm to 6000mm. Customization services are available for larger sheets. The model presented here is the MX-PB series, with a price range of EUR 20,800 - EUR 104,000. For example, for this MX-PB250T-3200, a standard machine with a capacity of 250Tons bending force, 3200mm length, approximately EUR 52,000. (Machine prices may vary depending on actual configuration and requirements.)
Itodpfx Agjya Hq Is Usb
(Have added a Photo on the tools that can be ordered for this machine) (We use quick clamp for tooling) (For safety, DSP 9 Piont Protect)
(Shipping from China NOT included)
Listing
Drachten
952 km
Press brake
BystronicPR 200
BystronicPR 200
Call
Condition: good (used), functionality: fully functional, Year of construction: 2006, Used 4 meter CNC press brake from Bystronic
Model: PR 200
Capacity: 4100 x 200 tons
Cybelec ModEva12 CNC control
Controlled axes: Y1, Y2, X, R, Z1, and Z2
Ijdpfx Aoya Hpdjg Ujtb
Year of manufacture: 2006
Extra long stroke: 415 mm
Hydraulic RFA upper clamping
Hydraulic WILA NS lower clamping
Hydraulic CNC crowning
Listing
Kreuztal
1,140 km
Hydr. Press brake
EHTEHP 8000 x 200 to
EHTEHP 8000 x 200 to
Call
Condition: good (used), Technical data:
Working length: 8050 mm
Column distance: 7550 mm
Pressing force: 200 t
CNC control: CYBELEC DNC 880 S
Adjustable backgauge
Dimensions (Length x Width x Height): approx. 8650 x 2900 x 3800 mm
Weight: approx. 47 tonnes
Note:
Isdpfx Asya D A Isg Uetb
The table extends approximately 3 meters into the floor.
Accessories:
Various tools
The seller shall not be liable for typing or data transmission errors. The machine's condition, visually, mechanically, and regarding wear, is consistent with its age; used machines are sold without any form of warranty.
Listing
Aprilia
2,036 km
Run press
LVDPPEB 110/42
LVDPPEB 110/42
Call
Condition: used, Year of construction: 2007, bending force (max.): 1,100 t, PRESS BRAKE "LVD" MOD. PPEB 110/42
Pressing force: 1,100 kN
Pressure: 245 bar
Usable length: 4,270 mm
Distance between uprights: 3,820 mm
Stroke: 200 mm
Table/ram distance: 400 mm
Throat depth: 400 mm
Table width: 120 mm
Maximum table load: 2,000 kN/m
Working height: 970 mm
Approach speed: 130 mm/s
Isdpfjya Dcujx Ag Uetb
Working speed: 12 mm/s
Return speed: 115 mm/s
Motor: 15 kW
Listing
Wiesbaden
1,192 km
Press brake
EHTEHPS 25-40
EHTEHPS 25-40
Call
Condition: ready for operation (used), Press force: 250 t
greatest working length: 4050 mm
equipped with CYBELEC DNC 70 PSG control
Itedpfxsx Tr Ugj Ag Ueb
Listing
Mozé-sur-Louet
866 km
Run press
LVDPPBL 135/30
LVDPPBL 135/30
Call
Condition: used, Press Brake
Ijdpfjx Tqt Uox Ag Ustb
Brand: LVD
Capacity: 3000 x 135T
Model: PPBL 135/30
Distance between uprights: 2550 mm
Throat depth: 200 mm
Stroke: 130 mm
Working speed: 8 mm/s
Number of backgauge axes: 2
Motor power: 8.5 kW
Listing
Tatabánya
1,985 km
Press brake
DURMAAD-R 30175
DURMAAD-R 30175
Call
Condition: excellent (used), functionality: fully functional, Year of construction: 2018, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller model: DT10, bending force (max.): 175 t, working width: 3,050 mm, distance between stands: 2,600 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, travel distance X-axis: 650 mm, back gauge adjustment: motor-driven, overall weight: 11,250 kg, Equipment: european tool clamping system, Durma AD-R 30175 CNC Hydraulic Press Brake for Sale (2018)
For sale: a lightly used Durma AD-R 30175 CNC hydraulic press brake, single owner, manufactured/purchased in 2018 (supplied by Vendo Kft.).
Iedpsx Taplofx Ag Ujtb
The machine is in excellent technical condition and has been regularly maintained.
Very low usage: over the past 7 years, it has been used on average only 2–3 hours per month.
Main Technical Specifications (Durma AD-R 30175):
CNC control: DT10 touchscreen controller
Pressing force: 175 tons
Bending length: 3050 mm
Distance between columns: 2600 mm
Y-axis rapid speed: 100 mm/s
Y-axis working speed: 10 mm/s
Y-axis return speed: 100 mm/s
X-axis speed: 250 mm/s
X-axis stroke: 650 mm
Back gauge: motorized ball screw type
Tool clamping: Euro-type quick clamping system
Machine weight: approx. 11,250 kg
Price: EUR 42,500 net
The machine can be inspected and tested at our facility in Tatabánya, Hungary.
Listing
Merano
1,573 km
Press brake
VimercatiPHSY 200
VimercatiPHSY 200
Call
Condition: excellent (used), functionality: fully functional, Year of construction: 2018, 6 axes Y1 - Y2 - X - R - Z1 - Z2
Electromechanical follower pair
Pneumatic punch and die clamping
Iodpjx Sru Dsfx Ag Uotb
Pneumatic bending and pressing unit
Intermediate pieces H = 200
Angle reader
ACTIVE hydraulic crowning
Listing
Birmingham
440 km
Press brake
BystronicPR 250x5100
BystronicPR 250x5100
Call
Condition: excellent (used), functionality: fully functional, Year of construction: 2005, control type: CNC control, controller manufacturer: Cybelec, bending force (max.): 250 t, stroke length: 265 mm, number of axes: 6, type of crowning: CNC-controlled, Equipment: CE marking, emergency stop, safety light barrier, Used Bystronic 250ton x 5metre multi axis hydraulic downstroke cnc pressbrake for sale
PR250 x 5100
Make: Bystronic
Model: PR 250 Pressure Reference
Year / new: 2005
Total axis:6 – 4axis back gauge X R Z1 Z2
Free standing no pit required
Capacity / bed size / tonnage: 5metre x 5100mm x 250ton
Cnc control: Cybelec
Isdpox R Ut Hsfx Ag Ujtb
Delivery to your factory and installation complete with tuition with your operators can be arranged (mainland UK only) shipping worldwide can be arranged
Listing
Deinze
846 km
Hydraulic pressbrakes
Durma HAP200 ton x 3100 mm
Durma HAP200 ton x 3100 mm
Call
Condition: ready for operation (used), throat depth: 260 mm, operating speed: 7 mm/s, reverse speed: 73 mm/s, total length: 4,270 mm, total width: 1,750 mm, total height: 2,850 mm, travel distance Z-axis: 190 mm, empty load weight: 12,000 kg, passage width: 2,550 mm, Durma HAP 200 ton x 3100 mm
Capacity: 200 ton x 3100 mm
Itjdpjx R E Hwofx Ag Ueb
Backgauge: elec
Locking speed: 100 mm/sec
Listing
Daugavpils
2,232 km
Run press
DURMAAD-S 30320
DURMAAD-S 30320
Call
Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 100 h, machine/vehicle number: 7363126775, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, Very good condition
Itjdpox R Ed Nsfx Ag Usb
Listing
Herning
1,147 km
Press brake
HacoERMS 36200
HacoERMS 36200
Call
Condition: used, functionality: fully functional, Year of construction: 2003, Capacity: 3600 x 200 tn.
Distance between frames: 3150 mm.
Stroke: 200 mm.
Throat: 300 mm.
Control: Robosoft ATS 560 NC.
Tools: 1 set. Full length.
Motor: 18,7 kW.
Year: 2003
Isdpfxex Rx Twe Ag Uetb
Country of origin: Belgium.
Size (L x W x H): 4900 x 2200 x 2650 mm.
Weight: 12.500 kg.
With Lazersafe ligth guard and manual crowning table.
All our machines are tested and serviced before delivery.
Listing
Concordia Sagittaria
1,733 km
Hybrid Press Brake 4100 x 220 Ton
MVDHC SERIES
MVDHC SERIES
Call
Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, controller manufacturer: ESA, controller model: S 875W, bending force (max.): 220 t, working width: 4,100 mm, stroke length: 310 mm, throat depth: 410 mm, distance between stands: 3,600 mm, operating speed: 10 mm/s, reverse speed: 200 mm/s, number of axes: 8, type of crowning: CNC-controlled, oil tank capacity: 220 l, travel distance X-axis: 750 mm, back gauge adjustment: CNC-controlled, back gauge: 750 mm, number of support arms: 2, Hybrid Bending Press MVD
4100 x 220 Tons
HC-Series
CNC ESA S 875W 21″ *dxf 3D ready
8 axes (Y1-Y2-X-R-Z1-Z2-X5_conical_A1)
Automatic WILA crowning table
Dsp Laser
GIVI MISURE high-precision optical scales
UNIMEC back gauge
Upper tool clamp: Promecam Rolleri Type H = 150 mm
Multi-cavity die, full length
Press force: 220 tons
Bending length: 4100 mm
Distance between uprights: 3600 mm
Itsdjx N Rxcepfx Ag Ueb
Throat depth: 410 mm
Table – ram opening (“light”): 515 mm
Working height: 965 mm
Y-axis stroke: 310 mm
Y-axis descent speed: 200 mm/s
Y-axis working speed: 0–10 mm/s
Y-axis return speed: 200 mm/s
X-axis back gauge stroke: 750 mm
Power: 18.5 kW
Dimensions (L x W x H): 5600 x 2200 x 3040 mm
Approximate weight: 13,700 kg
Listing
Kreuztal
1,140 km
Hydr. Press brake
AMADA PROMECAMHFBO 220/4 4100 x 220 to
AMADA PROMECAMHFBO 220/4 4100 x 220 to
Call
Condition: excellent (used), Technical data:
Working length: 4100 mm
Frame width: 3650 mm
Press force: 220 t
CNC Control: OPERATOR OPII graphic
Color monitor size: 14"
Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2
Motorized adjustable back gauge
Throat depth: 300 mm
Stroke: 180 mm
Automatic crowning
Iedpfxox N Hw Ie Ag Ujtb
Motor power: 17 kW
Dimensions (L x W x H): approx. 4800 x 2300 x 2900 mm
Weight: approx. 17 tons
Accessories:
New AMADA tools
The seller assumes no liability for typographical or transmission errors. The machine’s appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.
Listing
Turkey
3,071 km
4 METRE X 220 TON HYDRAULIC PRESS BRAKE
CRONOSSTECHHPB 4100X220
CRONOSSTECHHPB 4100X220
Call
Condition: new, Year of construction: 2025, control type: CNC control, actuation type: hydraulic, bending force (max.): 220 t, working width: 4,100 mm, stroke length: 310 mm, throat depth: 410 mm, distance between stands: 3,600 mm, operating speed: 10 mm/s, reverse speed: 140 mm/s, number of axes: 4, table height: 965 mm, type of crowning: motor-driven, back gauge adjustment: CNC-controlled, power: 18.5 kW (25.15 HP), STANDARD FEATURES
CNC-controlled hydraulic press brake
CNC control of Y1 – Y2 – X – R axes (4 axes)
CNC control unit (ESA S640 – 15” touchscreen, 2D graphic display)
Offline PC programming capability
Stress-relieved, heavy-duty steel frame
CNC-controlled synchronized cylinder system
310 mm stroke
410 mm throat depth
±0.03 mm precision servo-motorized back gauge
Back gauge travel distance:
X axis: 750 mm
R axis: 250 mm
Back gauge system with ball screw spindles and linear guides
Sliding type front support arms
Manual crowning system (wedge type)
Narrow European-style lower table
European-style quick-release upper tool clamping system (Promecam type)
High-precision linear encoders
Standard upper punch (H: 67 mm – 85° – R: 0.8)
Standard lower die (60×60 mm – 4 grooves V: 16 / 22 / 35 / 50 mm)
Front safety system with laser beam
LED lighting
Foot pedal
Itsdpfxsx Nqqrj Ag Ujb
Emergency stop buttons
Safety equipment compliant with CE standards
OPTIONAL FEATURES
4 / 6 / 8-axis back gauge systems starting from X + R
Extension of the X-axis back gauge travel up to 1000 mm
Additional back gauge fingers
Hydraulic upper and lower tool clamping systems
Motorized crowning system
Wide lower table for multi-groove dies
Front safety laser system (AKAS or DSP)
Rear safety light barrier
CNC-controlled sheet metal front support systems
Automatic angle measurement system
Oil cooler or oil heater
Electrical cabinet with air-conditioned cooling system
Deep throat option
TECHNICAL SPECIFICATIONS (C 220 / 4100 MODEL)
Bending force: 220 tons
Bending length: 4100 mm
Distance between side frames: 3600 mm
Stroke: 310 mm
Open height (distance between lower and upper dies): 515 mm
Throat depth: 410 mm
Table height: 965 mm
Back gauge axes: X = 750 mm / R = 250 mm
Approach speed: 180 mm/sec
Working speed: 140 mm/sec
Return speed: 10 mm/sec
Main motor power: 18.5 kW
Oil tank capacity: 290 liters
Machine weight: ~13,650 kg
Machine dimensions (LxWxH): approx. 6180 x 2650 x 3040 mm
Listing
Turkey
3,071 km
400 ton x 4 metre hydraulic press brake
CRONOSSTECHHPB 4100X400
CRONOSSTECHHPB 4100X400
Call
Condition: new, Year of construction: 2025, control type: CNC control, actuation type: hydraulic, bending force (max.): 400 t, working width: 4,100 mm, stroke length: 310 mm, throat depth: 510 mm, distance between stands: 3,600 mm, operating speed: 8 mm/s, reverse speed: 80 mm/s, number of axes: 4, table height: 985 mm, type of crowning: motor-driven, back gauge adjustment: CNC-controlled, power: 30 kW (40.79 HP), Standard Features
• Y1, Y2, X, R 4-Axis CNC (X+R Servo)
• 410 mm Stroke, 510 mm Throat Depth
• ESA S650 CNC Control Unit
• Servo-driven backgauge with ±0.03 mm accuracy, X=750 mm, R=250 mm
• European type Promekam quick die clamping system
• Sliding front support system
• Manual crowning system (Original WILA wedge-type)
• Narrow lower beam (European type)
Iedpfxsx Npalj Ag Ujtb
• GIVI brand linear scales
• Standard upper tool (H: 67, 850 R:08)
• Standard lower tool (60x60 mm, 4-way V=16-22-35-50 mm, 850 H:60)
• LED lighting
Optional Features
• Rear backgauge options from X+R up to 4-6-8 axes
• ROLLERI Roll200 hydraulic die clamping
• WILA hydraulic upper and lower die clamping
• Wide lower beam for multi-vee die
• Backgauge X-axis distance 1000 mm
• AKAS or DSP front laser safety system
• Additional backgauge fingers
• Additional backgauge stops
TECHNICAL SPECIFICATIONS VALUE
Bending Force (Ton) 400
Bending Length (mm) 4100
Distance Between Side Frames (mm) 3600
Stroke (mm) 310
Daylight Opening (mm) 535
Throat Depth (mm) 510
Table Height (mm) 985
Approach Speed (mm/s) 100
Return Speed (mm/s) 80
Pressing Speed (mm/s) 8
Oil Tank Capacity (L) 400
Machine Weight (kg) 22500
Main Motor Power (kW) 30
CNC Control Unit ESA S640
Number of CNC Axes Y1-Y2-X-R (4 Axes)
Backgauge X (mm) 750
Backgauge R (mm) 250
Crowning Manual (WILA wedge-type)
Safety System Front laser safety
Origin Turkey
Listing
Turkey
3,071 km
400 TON x 6 METRE HYDRAULIC PRESS BRAKE
CRONOSSTECHHPB 6100X400
CRONOSSTECHHPB 6100X400
Call
Condition: new, Year of construction: 2025, control type: CNC control, actuation type: hydraulic, bending force (max.): 400 t, working width: 6,100 mm, stroke length: 310 mm, throat depth: 510 mm, distance between stands: 5,100 mm, operating speed: 8 mm/s, reverse speed: 80 mm/s, number of axes: 4, table height: 1,055 mm, type of crowning: motor-driven, back gauge adjustment: CNC-controlled, power: 30 kW (40.79 HP), Standard Features
• Y1, Y2, X, R 4-axis CNC (X+R Servo)
• 410 mm stroke, 510 mm throat depth
• ESA S650 CNC control unit
• Servo motorized backgauge with ±0.03 mm precision, X=750 mm, R=250 mm
• European type Promekam quick die clamping system
• Sliding front support system
• Manual crowning system (Original WILA wedge type)
Itsdpfox Nn Sysx Ag Ueb
• Narrow bottom table (European type)
• GIVI brand linear encoders
• Standard upper tool (H: 67, 850 R:08)
• Standard lower tool (60x60 mm, 4-channel V=16-22-35-50 mm, 850 H:60)
• LED lighting
Optional Features
• Backgauge options from X+R up to 4-6-8 axes
• ROLLERI Roll200 hydraulic die clamping
• WILA hydraulic upper and lower die clamping
• Wide bottom table for multi-channel tooling
• Backgauge X distance up to 1000 mm
• AKAS or DSP laser front safety system
• Additional backgauge fingers
• Additional backgauge tongues
TECHNICAL SPECIFICATIONS VALUE
Bending Force (Ton) 400
Bending Length (mm) 6100
Distance Between Side Frames (mm) 5100
Stroke (mm) 310
Open Height (mm) 535
Throat Depth (mm) 510
Table Height (mm) 1055
Approach Speed (mm/s) 100
Return Speed (mm/s) 80
Pressing Speed (mm/s) 8
Oil Tank (L) 400
Machine Weight (kg) 33000
Main Motor (kW) 30
CNC Control Unit ESA S640
Number of CNC Axes Y1-Y2-X-R (4 axes)
Backgauge X (mm) 750
Backgauge R (mm) 250
Crowning Manual (WILA wedge type)
Safety System Laser front safety
Origin Turkey
Listing
Turkey
3,071 km
320 TON x 4 METRE HYDRAULIC PRESS BRAKE
CRONOSSTECHHPB 4100X320
CRONOSSTECHHPB 4100X320
Call
Condition: new, Year of construction: 2025, control type: CNC control, actuation type: hydraulic, bending force (max.): 320 t, working width: 4,100 mm, stroke length: 310 mm, throat depth: 410 mm, distance between stands: 3,600 mm, operating speed: 10 mm/s, reverse speed: 110 mm/s, number of axes: 4, table height: 955 mm, type of crowning: motor-driven, back gauge adjustment: CNC-controlled, power: 22 kW (29.91 HP), Standard Features
• Y1, Y2, X, R 4-Axis CNC (X+R Servo)
Itsdpjx Nn I Usfx Ag Ujb
• 410 mm Stroke, 510 mm Throat Depth
• ESA S650 CNC Control Unit
• Servo motorized backgauge with ±0.03 mm accuracy, X=750 mm, R=250 mm
• European type Promecam quick die clamping system
• Sliding front support system
• Manual crowning system (Original WILA cam)
• Narrow lower table (European type)
• GIVI brand linear scales
• Standard upper die (H: 67, 850 R:08)
• Standard lower die (60x60 mm, 4-way V=16-22-35-50 mm, 850 H:60)
• LED lighting
Optional Features
• 4, 6, or 8-axis backgauge options starting from X+R
• ROLLERI Roll200 hydraulic die clamping
• WILA hydraulic upper and lower die clamping
• Wide lower table for multi-channel dies
• Backgauge X-travel of 1000 mm
• AKAS or DSP laser beam front safety system
• Additional backgauge fingers
• Additional backgauge stop plates
TECHNICAL SPECIFICATIONS VALUE
Bending Force (Ton) 320
Bending Length (mm) 4100
Distance Between Side Frames (mm) 3600
Stroke (mm) 310
Daylight Opening (mm) 535
Throat Depth (mm) 410
Table Height (mm) 955
Approach Speed (mm/s) 150
Return Speed (mm/s) 110
Pressing Speed (mm/s) 10
Oil Tank Capacity (L) 290
Machine Weight (kg) 16800
Main Motor Power (kW) 22
CNC Control Unit ESA S640
Number of CNC Axes Y1-Y2-X-R (4 Axes)
Backgauge X Travel (mm) 750
Backgauge R Travel (mm) 250
Crowning Manual (WILA cam)
Safety System Front laser safety
Country of Origin Turkey
Listing
Turkey
3,071 km
320 TON x 3 METRE HYDRAULIC PRESS BRAKE
CRONOSSTECHHPB 3100X320
CRONOSSTECHHPB 3100X320
Call
Condition: new, Year of construction: 2025, control type: CNC control, actuation type: hydraulic, bending force (max.): 320 t, working width: 3,100 mm, stroke length: 310 mm, throat depth: 410 mm, distance between stands: 2,600 mm, operating speed: 10 mm/s, reverse speed: 110 mm/s, number of axes: 4, table height: 955 mm, type of crowning: motor-driven, back gauge adjustment: CNC-controlled, power: 22 kW (29.91 HP), Standard Features
• Y1, Y2, X, R 4-axis CNC (X+R Servo)
• 410 mm stroke, 510 mm throat depth
• ESA S650 CNC control unit
• Servo motorized backgauge with ±0.03 mm precision, X=750 mm, R=250 mm
• European type Promecam quick die clamping system
• Sliding front support system
• Manual crowning system (Original WILA cam lock)
• Narrow lower table (European type)
• GIVI brand linear scales
• Standard upper tool (H: 67, 850 R:08)
• Standard lower die (60x60 mm, 4-channel V=16-22-35-50 mm, 850 H:60)
• LED lighting
Optional Features
• 4-6-8 axis backgauge options starting from X+R
• ROLLERI Roll200 hydraulic die clamping
• WILA hydraulic upper and lower die clamping
Itsdpfx Agsx Nn Eae Usb
• Wide lower table for multi-channel die
• Backgauge X travel distance 1000 mm
• AKAS or DSP laser beam front safety system
• Additional backgauge fingers
• Additional backgauge tongues
TECHNICAL SPECIFICATIONS VALUE
Bending Force (Ton) 320
Bending Length (mm) 3100
Distance Between Side Frames (mm) 2600
Stroke (mm) 310
Open Height (mm) 535
Throat Depth (mm) 410
Table Height (mm) 955
Descent Speed (mm/sec) 150
Return Speed (mm/sec) 110
Pressing Speed (mm/sec) 10
Oil Tank Capacity (Lt) 290
Machine Weight (kg) 14,700
Main Motor Power (kW) 22
CNC Control Unit ESA S640
CNC Axis Configuration Y1-Y2-X-R (4 Axis)
Backgauge X (mm) 750
Backgauge R (mm) 250
Crowning Manual (WILA cam lock)
Safety System Laser front safety
Origin Turkey
Listing
Turkey
3,071 km
220 TON 3 METRE HYDRAULIC PRESS BRAKE
CRONOSSTECHHPB 3100X220
CRONOSSTECHHPB 3100X220
Call
Condition: new, Year of construction: 2025, control type: CNC control, actuation type: hydraulic, bending force (max.): 220 t, working width: 3,100 mm, stroke length: 310 mm, throat depth: 410 mm, distance between stands: 2,600 mm, operating speed: 10 mm/s, reverse speed: 140 mm/s, number of axes: 4, type of crowning: motor-driven, back gauge adjustment: CNC-controlled, power: 18.5 kW (25.15 HP), Standard Features
• Y1, Y2, X, R 4-axis CNC (X+R Servo)
• 410 mm stroke, 510 mm throat depth
• ESA S650 CNC control unit
• Servo-motorized backgauge with ±0.03 mm precision, X=750 mm, R=250 mm
• European type Promekam quick-release die clamping system
• Sliding front support system
• Manual crowning system (Original WILA wheeled)
• Narrow lower beam (European type)
• GIVI brand linear scales
• Standard upper tool (H: 67, 850 R:08)
• Standard lower die (60x60 mm, 4-channel V=16-22-35-50 mm, 850 H:60)
• LED lighting
Iedpfxox Nnzbj Ag Uetb
Optional Features
• 4-6-8 axis backgauge options starting from X+R
• ROLLERI Roll200 hydraulic die clamping
• WILA hydraulic upper and lower die clamping
• Wide lower beam for multi-channel tooling
• Backgauge X travel up to 1000 mm
• AKAS or DSP front laser light safety system
• Additional backgauge fingers
• Additional backgauge tongues
TECHNICAL SPECIFICATIONS VALUE
Bending Force (Ton) 220
Bending Length (mm) 3100
Distance Between Side Frames (mm) 2600
Stroke (mm) 310
Open Height (mm) 515
Throat Depth (mm) 410
Table Height (mm) 940
Approach Speed (mm/s) 180
Return Speed (mm/s) 140
Pressing Speed (mm/s) 10
Oil Tank Capacity (L) 290
Machine Weight (kg) 11300
Main Motor (kW) 18.5
CNC Control Unit ESA S640
CNC Axes Y1-Y2-X-R (4-Axis)
Backgauge X (mm) 750
Backgauge R (mm) 250
Crowning Manual (WILA wheeled)
Safety System Front laser safety
Origin Turkey
Listing
Focșani
2,668 km
PUNCHPRESS
DURMATP9
DURMATP9
Call
Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 5,000 h, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: SIEMENS, controller model: SIMATIC, bending force (max.): 50 t, working width: 1,250 mm, power: 7.5 kW (10.20 HP), Equipment: CE marking, documentation/manual, DURMA TP9 Prunch press
Year : 2011
Low hours.
Very very good condition - ready to use.
Tools are not included.
Itedpox I Rh Ujfx Ag Usb
Auction
Ends in
d
h
min
s
Auction ended
Bayern
1,407 km
Press brake
WEINBRENNERGP 250 3550
WEINBRENNERGP 250 3550
Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, controller model: Cybelec DNC 1200, bending force (max.): 250 t, working width: 3,550 mm, distance between stands: 3,000 mm, overall weight: 18,500 kg, TECHNICAL DETAILS
Press force: 250 t
Bending length: 3,550 mm
Distance between uprights: 3,000 mm
MACHINE DETAILS
Controlled axes: y1, y2, x, r, z1, z2, back gauge tilt
Control unit: Cybelec DNC 1200
Dimensions & weight
Footprint (L x W x H): approx. 4,300 x 2,750 x 3,750 mm
Iedpfxex I Ebio Ag Ustb
Machine weight: approx. 18,500 kg
EQUIPMENT
Two-hand foot switch
Lasersafe Fisseler
Hydraulic tool clamping top and bottom
Die shifting
Hydraulic crowning
Support arms
1 set of upper and lower tools
Safety guard
Listing
Deinze
846 km
Hydraulic pressbrakes
LVD PPEBTurbo 80 ton x 2500 mm CNC
LVD PPEBTurbo 80 ton x 2500 mm CNC
Call
Condition: ready for operation (used), controller manufacturer: Cadman B + Touch, throat depth: 400 mm, operating speed: 11 mm/s, reverse speed: 113 mm/s, total length: 4,355 mm, total width: 2,525 mm, total height: 3,000 mm, power: 20 kW (27.19 HP), travel distance Z-axis: 300 mm, empty load weight: 6,500 kg, passage width: 2,050 mm, table width: 150 mm, 8 assen: Y1 - Y2 - X - X' - Z1 - Z2 - R - V
Easy Form Lasermeetsysteem (EFL)
Wila modufix gereedschap (boven- en onderhydraulische klemming)
lasersafe beveiliging
2 verplaatsbare plaatdragers
Vergrote opening van 500 mm!!
Capacity: 80 ton x 2500 mm
Backgauge: CNC
Max distance between table -- ram: 500 mm!!
Itedpfox Imm Hex Ag Ueb
Locking speed: 130 mm/sec
Listing
Deinze
846 km
Hydraulic pressbrakes
Safan CNCL-K80 ton x 3100 mm CNC
Safan CNCL-K80 ton x 3100 mm CNC
Call
Condition: ready for operation (used), controller manufacturer: TS1 touchscreen, throat depth: 400 mm, installation height: 420 mm, operating speed: 10 mm/s, reverse speed: 120 mm/s, total length: 4,300 mm, total width: 1,800 mm, power: 5.5 kW (7.48 HP), travel distance Z-axis: 240 mm, empty load weight: 7,500 kg, passage width: 2,550 mm, table width: 90 mm, 7 axes: Y1 / Y2 / X / R / Z1 / Z2 / V
wila / modufix / standard tooling
sick laser security
Itodpfx Aex Immyog Ujb
enlarged stroke of 240 mm
enlarged depth of throat of 400 mm
Capacity: 80 ton x 3100 mm
Backgauge: CNC
Locking speed: 300 mm/sec
Height: 3160 mm (with arm)














































































































































