Freewater4u

Year of construction: 2017, condition: excellent (used), functionality: fully functional, machine/vehicle number: PL1500-12-REV, High frequency welding machine Year of construction 2017 Full Review Year 2026 Power 12KW Electrode 20x1200mm 150cm of arm Large material tank Low pressure system for operator hand safety Back mass plate to the electrode 3 thrust cylinders Automatic adjustment Shielded electrode holder for radio frequency output Kwodoymdzkepfx Ah Eou Triode ITL9-1 tested and fully functional (12 months warranty) User manual 12 months warranty

Year of construction: 2023, condition: excellent (used), machine/vehicle number: 0293, We are selling the test bench from the aircraft manufacturing sector. Kwedpfxeyl S Eus Ah Eeu

Condition: used, Year of construction: 2001, functionality: fully functional, load capacity: 15 kg, Fully functional waterjet system (manufactured circa 2001) with KUKA KR15 six-axis robot. The system operates with pure waterjet cutting (without abrasive additives) and is currently still in use for processing plastic components. Offline programming, demonstration possible. Includes KMT Streamline pump (15 HP). Complete system with automatic door opening and closing. Contact us if interested! Kwsdpjyl Niqefx Ah Eeu

Year of construction: 2017, condition: new, functionality: fully functional, Universally applicable bridge-type swing-beam cutting machine with lift table. Model: 5300A Designed for the manual cutting of sheet and roll materials. Machine configuration includes the following components: • Model 5300A / 1600 x 800 / 800 kN • Blade holder rails for fixed sheet width mounted on the bridge • Plastic cutting pad, type HY 78 Additional equipment: • Automatic die shifting device • Unwinding unit with powered feed for roll materials • Material hold-down device mounted at the table infeed for securing roll material during cutting • Laser material positioning device with 4 cross lasers • 1 spare cross laser Automatic die shifting device Material hold-down device mounted at the table infeed for fixing roll material during cutting Unwinding device with motorized feeding for roll materials Laser positioning system with 4 cross lasers and 1 spare laser Technical data: Cutting force: 800 kN Table area: 1600 x 800 mm Table height, approx.: 1000 mm Max. material passage height: 190 mm Stroke, adjustable: 15 – 165 mm Adjustable stops: 40 mm Height of safety light curtain: 750 mm Machine weight, approx.: 5,100 kg Hydraulics and drives: Bridge travel drive power requirement: 1.5 kW Bridge travel time, approx.: 2 sec. Closing speed: approx. 90 mm/s Cutting speed: 33 / 5.5 mm/s Return speed: approx. 52 mm/s Hydraulic motor power: 4 kW Oil requirement: 200 l (ISO VG 46) (The required quantity of oil is not included in the delivery.) Plastic cutting pad: Quality: HY 78 natural Shore hardness (D): 78 Dimensions: 1600 x 800 mm Kwsdoyly R Eepfx Ah Eou Pad thickness: 10 mm Material: polypropylene

Year of construction: 2004, condition: used, Hollinger 4-point welding machine type ASP-L Kwodoylingepfx Ah Eou

Year of construction: 2014, condition: new, DC-Sputtering Power Supply ADL HX 300/1000 Year of construction: 2014 (New, never used) Power: 30 kW Kodsyk Hkvepfx Ah Eewu (see photo for more technical details)

Condition: ready for operation (used), For sale here is a well-maintained Weiler RDU. Test run possible. Extensive accessories available. On-site loading possible. Kwodpfxjykb Nms Ah Eou

Condition: used, Year of construction: 1993, functionality: fully functional, Roller conveyor No. 12 – Gatter roller conveyor with lifter and cross-transfer of the main product (sawn timber), 2 speeds. Fast speed for onward transport of side products. Slow speed for cross-transfer of the main product to the left or right. Roller conveyor No. 13 – Roller conveyor for onward transport of sawn timber. Kodpfx Aoyi Epnoh Eowu

Year of construction: 2022, condition: like new (used), Machine for printing QR codes and applying hologram patches, customization of labels or roll-fed paper support. Performs hot stamping of customized hologram or transparent foil onto the QR code, enabling immediate verification via reader device with IOS or Android software. Kjdpeygku Rsfx Ah Eswu

Condition: new, Year of construction: 2025, functionality: unexamined, machine/vehicle number: 10013174, A damaged industrial vacuum cleaner is being offered for sale. - Manufacturer: P. Ries GmbH, CH - Type: 250 D 2.2 kW - Year of manufacture: 2025 - Weight: 130 kg net Kjdpfx Ahsyaqc Ie Ejwu Damage: The unit appears to have toppled over. The housing is dented and deformed in several places. No information is available regarding functionality. The unit is stored on a wooden pallet, with no external packaging. Sale: ex stock, without warranty or liability.

Condition: not inspected (used), See attachment. Ksdpfxox U Ebcj Ah Eswu

Condition: like new (used), Year of construction: 2020, operating hours: 200 h, functionality: fully functional, overall weight: 16,490 kg, total length: 12,000 mm, total width: 6,000 mm, year of last overhaul: 2024, PLASMA CUTTING MACHINE INSTRUCTION MANUAL HPR400 XD Kodpsx Tudwefx Ah Ejwu HIGH PERFORMANCE HPR400XD PLASMA CUTTING MACHINE 3000 X 12000 TECHNICAL SPECIFICATIONS

Condition: good (used), functionality: fully functional, machine/vehicle number: 003128, empty load weight: 200 kg, Year of construction: 2003, Hello. I have a profile wrapping machine from Ruchser for sale. The machine is 100% operational and comes with roller tables. It is capable of simultaneous wrapping of the profile on three sides. If you have any questions, please contact me. Kwodpfx Ahsx Tpgyj Esu

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 18-052-3/4, roller width: 700 mm, We are offering this as-new Cima Impianti CI-Maxi 1800 buffing machine, year of manufacture 2018. The buffing machine has had very little use and is in excellent, near-new condition. With this machine, wheel loader and OTR tyres up to size 29.5R25 can be buffed. Rim sets in 20.5 and 25" are available. At our facility, the machine was used exclusively for the tyre size 24 R 20.5. Kwedpfxox Nqlvj Ah Eju Manufacturer: Cima Impianti Model: CI-Maxi 1800 Year of manufacture: 2018 If you have any questions or need further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Switch Testing Device - 3x test stations for appliance switch testing Kjdpfx Ahsx I Ef Uj Ejwu - Voltage: 0–600V AC / DC - Current rating: max. 40A - Operation of test switches via pneumatic cylinders - Testing with resistive and inductive loads according to EN 61058 (VDE 0630) - 1x thermal chamber (oven) for testing at ambient temperatures up to 125°C - Testing of appliance switches with rated data 250Vac / 16(4)A / 125°C Buyer responsible for disassembly!

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, conveyor belt length: 3,100 mm, conveyor belt width: 2,200 mm, total length: 3,100 mm, total width: 2,200 mm, power: 3 kW (4.08 HP), We offer this very good Blackman and White Versatech Cutting Machine, year of construction 2017. 2.2 x 3.1mtr conveyorised bed, with on board 3kw water cooled router and drag knife, with iCut camera registration system. Can be seen fully working and tested in Leicester UK. Price is ex works, we can put you in touch with the engineer who will provide a seperate and direct cost to move the machine. If you have any questions or need more information, feel free to send us a message or give us a call. Kwodpfxex Ik Dco Ah Esu

Year of construction: 2024, condition: new, functionality: fully functional, Electric vaporizer Capable of vaporizing liquefied gas at any temperature. We utilize these units to vaporize liquid CO2 and store it in concrete. It can also be used for other applications, such as vaporizing nitrogen, oxygen, or other gases for use in end processes. New price 140,000 CHF. Kwodsx H R Ryjpfx Ah Esu

Condition: good (used), Year of construction: 2021, functionality: fully functional, total length: 4,200 mm, total width: 1,100 mm, total height: 2,300 mm, overall weight: 500 kg, Equipment: emergency stop, automated system for the production of MNS masks. Kodpfx Aex H Nm Hoh Ejwu

Year of construction: 2018, condition: ready for operation (used), Offered is a cleaning system for assemblies in electronics manufacturing: Functions: injection flooding with compressed-air support, vacuum drying, 100% recirculation (closed loop), MPC-cleaner compatible. Technical data: cleaning tank 80L, rinsing tanks 2x 60L. Stainless steel construction. Dimensions X/Y/Z: approx. 1600mm/1000mm/2000mm, weight: approx. 700kg, including operating manual, data sheet, CE declaration. Viewing possible by arrangement. Ksdpox Hff Eefx Ah Eowu

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 101, Eddy current tester with automatic shaft inspection Kwodpfxsx Ezkho Ah Eou

Condition: excellent (used), Year of construction: 2022, operating hours: 95 h, functionality: fully functional, For sale: Complete industrial microwave generator system from MUEGGE GmbH (Germany), 30 kW at 915 MHz, in excellent condition with very low operating hours. This package includes the full WR975 high-power waveguide assembly, making it ideal for industrial heating, drying, food processing, chemical applications, and R&D environments. Technical Specifications Ksdpfsx Ex Drox Ah Ejwu Microwave Power Supply: • Output power: 30 kW • Frequency: 915 MHz • Input: 3 × 400 VAC, 50 Hz • Control interface: CAN • Colour: RAL7035 • Included: 10 m CAN cable Magnetron Head: • Power rating: 30 kW / 915 MHz • Waveguide interface: WR975 Included Waveguide Components: • 100 kW circulator, WR975 • WR975 waterload • Detector diode (for forward/reflected power monitoring) • 20 dB attenuator, Type R 412 720 Documentation: • Complete English instruction manual and technical documentation provided on USB stick. Condition: • Excellent – barely used • Fully functional and tested • Located in France • Ready for immediate dispatch Applications: • Industrial microwave heating • Drying and dehydration processes • Pasteurisation and food treatment • Chemical and materials processing • Research and development Original New Price: • €109,000 (manufacturer reference) Asking Price: • Negotiable, subject to shipping and inspection

Condition: used, Year of construction: 2007, operating hours: 1,234 h, functionality: fully functional, machine/vehicle number: 65020107, Equipment: documentation/manual, Hello. My profession is picture framing. A few years ago, I retired and have decided to sell the machines I no longer need. One of them is a BVP 65 E /380 Biedermann vacuum laminating press - 1.80x1.30 m. I mostly used it to laminate posters, which I would then frame. However, you can also laminate graphics, drawings, photographs, silk, and batik. Ksdpfx Ahsx Dq A Is Eswu The image is bonded to MDF in the machine using heat and pressure with a special film. At the same time, a laminating foil is applied to the image. The finished product is protected not only against dirt but also against UV radiation, and it is overall very lightweight. The lamination surface can be smooth or textured like canvas. Pictures with a textured surface look like they were painted on canvas. Various laminating films are included in the price—see the photo. The vacuum press is in good technical condition. Thank you for your response and have a nice day.

Year of construction: 2021, condition: excellent (used), functionality: fully functional, Automatic rewinder for foam. Ksdex Dkinepfx Ah Eewu A machine designed for winding elastic materials such as PUR foam, polyester foam, latex. It consists of an unwinding unit and a winding unit. The machine has been adapted to wind a foam roll from a cut foam block. Wound foam rolls are used in different industries such as mattress manufacturing, footwear, and clothing production, among others. The machine is fully automated. It allows you to wind a specified number of running meters per roll. The number of meters depends on the thickness of the material. Thanks to special dispensers, the machine precisely handles winding a set number of meters of any flexible material (such as PUR foam). Maximum roll width is 220 cm. Diameter of the finished roll is approx. 100 cm. The material is wound onto a 63 mm diameter cardboard core. Machine dimensions: 650x350x165 cm. Power: 2 kW. Very low noise level, around 69 dB. For those interested, please contact us. The machine is in very good condition with very few operating hours.

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: SKF29452E, outer diameter: 480 mm, Industrial spherical roller thrust bearing SKF Explorer 29452 E SKF 29452E SKF29452E Bearing SKF 29452E EAN 7316576613395 Brand new, factory-sealed bearing, physically in stock. Technical specifications Inner diameter (mm): 260 Outer diameter (mm): 480 Width (mm): 132 Kodpfxoxz Rz So Ah Eswu Weight (kg): 105.00 Code designation: 29452 E Type: Spherical roller thrust bearings Manufacturer: SKF Country: SE Sweden Availability: Shipping within 24h Minimum order (pcs): 1 Item EAN number: 7316576613395 Own transport available.

Condition: excellent (used), Year of construction: 2018, operating hours: 19,394 h, functionality: fully functional, machine/vehicle number: 2522027, travel distance X-axis: 2,500 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 1,250 mm, total length: 5,900 mm, table length: 2,500 mm, table width: 2,500 mm, total width: 6,139 mm, total height: 5,980 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 50 m/min, distance between stands: 3,225 mm, table load: 4,000 kg, workpiece weight (max.): 16,000 kg, rotational speed (min.): 1 rpm, rotational speed (max.): 15,000 rpm, distance table center to spindle nose: 1,500 mm, tool weight: 8,000 g, Equipment: rotational speed infinitely variable, Control: Heidenhain TNC640 Number of controlled axes: 5; simultaneous Kwedpoxx Svxjfx Ah Esu Commissioned: 2019 Spindle run time (h): 12,629 Tool holder: HSK 100 Tool changer: 30 positions Linear motor Internal coolant supply (IKZ): 65 bar incl. chip conveyor incl. special operator panel