Sportera D.o.o.

Condition: used, Year of construction: 1988, sheet width 2500 mm plate thickness 3 mm weight of the machine ca. 1,7 t Rodpfxjzxiaus Ac Tscf

Condition: used, Year of construction: 1990, table diameter 360-800 mm automatic feeds ja Rcjdpfx Aozxianec Tef weight of the machine ca. 5,7 t

Condition: used, Year of construction: 1990, weight of the machine ca. 350 kg Redpfjzxiabox Ac Tscf

Condition: good (used), Year of construction: 2020, operating hours: 1,329 h, load capacity: 1,400 kg, lifting height: 5,016 mm, fuel type: electric, mast type: triplex, construction height: 2,165 mm, empty load weight: 1,600 kg, mileage: 1,329 km, Electric triple-mast stacker Brand: Still (Germany) Year of manufacture: 2020 Only 1,329 operating hours Capacity: 1,400 kg Lifting height: 5,016 mm Mast lowered height: 2,165 mm Rcodpfxezxh U Rs Ac Tsf Equipped with: FREELIFT Battery: 2022, with charger Automatic filling system Watch the video on YouTube.

Condition: used, Year of construction: 2007, x-travel 600 mm y-travel 450 mm z-travel 450 mm Control Heidenhain iTNC 530 feed power 7.000 N rapid traverse 45 m/min Acceleration 6 m/s² number of tool places 30 Pos. Max. magazine capacity 120 kg weight of tools max. 6 kg diameter of tools max. 80 mm tool length - max. 250 mm In our assessment, the machine is in good used condition Rodezxh U Dspfx Ac Tjcf and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale!

Condition: used, Year of construction: 2012, x-travel 670 mm y-travel 820 mm z-travel 600 mm control Heidenhain iTNC 530 turning speed range - main spindle 18000 min/-1 drive capacity - main spindle 25-35 kW max. torque 87-130 Nm table surface area 800 x 800 mm T-slots 9x90 Rsdpfx Acszxh Uws Tjcf rotating range 360 ° swival range +/- 120 Grad max. table load 1200 kg tool taper HSK 63 A number of tool places 96 Pos. max. tool diameter 75 mm max. tool length 300 mm max. tool weight 7 kg change-time tool to tool 3 sec rapid traverse ( x / y / z ) 60 m/min total power requirement 85 kW weight of the machine ca. 19 t dimensions of the machine ca. 4,15 x 5 x 3,5 m In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features: - New spindle - Refurbished table Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale!

Condition: used, Year of construction: 2017, turning diameter 550 mm turning length 978 mm control FANUC F0-iT + MG i x-axis 352 mm z-axis 1.105 mm spindle tunring speed 2.000 U/min number of tool places 12 Pos. Number of working hours ca. 8.577 h machine weight ab. 10.100 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Hinged-belt chip conveyor (right-hand side) - Built-in programmable tailstock Rodpfxjzxh Uqo Ac Tecf - Internal quill bearing for fixed MT5 center - Automatic tool-setting arm (hydraulically swiveling) Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data/specifications, and prior sale.

Condition: used, mileage: 790,048 km, power: 355 kW (482.67 HP), first registration: 02/2018, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2018, Equipment: AdBlue, Bluetooth, EBS, air conditioning, cruise control, electric window regulation, electronic stability program (ESP), fog lights, fridge, power mirror, seat heater, soot filter, spoiler, = Additional Options and Accessories = - Aluminum fuel tank - Brake booster - Roof spoiler - EPS (Electronic Power Steering) - Low-noise operation - Air horn - Particulate filter - Radio/CD player - Sunroof - Sleeper cab - Side door - Seat heating - Tool box = Additional Information = Front axle: Steered; Suspension: Leaf spring Rear axle: Suspension: Air suspension Unladen weight: 8,167 kg Payload: 10,833 kg GVWR: 19,000 kg Rodpfjzxh Uksx Ac Tscf Vehicle number: DAF XF 480 / SpaceCab / Euro 6 .: XLRTEH4300G193397 Transmission: Automatic Suspension: Leaf / Air Air conditioning Engine brake Cruise control Auxiliary heater Distance control assistant Lane keeping assist Emission standard EURO 6 Problem: Low oil pressure!!! Engine runs properly No liability for printing and typographical errors, changes, prior sale, and errors. = Company Information = No liability for printing and typographical errors, changes, prior sale, and errors. Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: ET.200.0100.2026, overall weight: 32 kg, input voltage: 220 V, input current: 21 A, type of input current: AC, warranty duration: 24 months, Equipment: documentation/manual, METALSELF ET-200 Automatic Orbital Welder | NEW, MADE TO ORDER (Fully Configurable) Metalself Srl presents the ET-200 orbital TIG welding system, the ultimate solution for high-precision pipe welding. The machine is supplied We guarantee fast delivery times of 15-20 working days. EXCLUSIVE END-OF-YEAR PROMOTION: For all configurations ordered by December 31st, we are offering a special company-wide promotional campaign. We invite you to contact us directly to request a customized quote and discover the discounts applied to the purchase of the new machine! ADVANTAGES OF THE METALSELF ORBITAL TECHNOLOGY: The orbital welder automates the TIG welding process of pipes by rotating a torch around the joint to create precise, uniform, and repeatable welds. This technology often eliminates the need for a skilled welder, reducing reliance on the operator's manual skills, increasing production speed, and lowering long-term costs. TECHNICAL DATA OF THE POWER SOURCE (ET-200 GENERATOR): Rjdpjzxh Udefx Ac Tocf -Generator Type: Inverter power source controlled by a microprocessor. -Input Voltage: 220VAC ±10% (110V optional). -Frequency: 50/60 Hz. -Power Consumption: 4.5 KVA. -Welding Current: Adjustable from 5 to 200 A. -Current Control: DC mode (direct current, for greater thicknesses) and Pulse mode (for precise heat control, ideal for stainless steel, titanium, and thin walls). -Memory Capacity: Up to 200 welding programs can be stored. -Intelligent Programming: "Auto Prog" function automatically generates optimal parameters by simply entering the head model, diameter, and thickness of the pipe being processed. -Control and Traceability: On-board thermal printer for issuing reports at the end of the cycle and USB port for digital data export. -Cooling: Integrated water circulation system. -Sound Emissions (LpA) < 70 dB(A). CONFIGURABLE WELDING HEADS (CLOSED CHAMBER SERIES): The ET-200 power source can be combined with various closed-chamber orbital welding heads, depending on the diameters you need to work with. All heads use Argon gas and water cooling to ensure continuous and long-lasting cycles: * Model 5H: For tubes from Ø 6.35 to Ø 12.7 mm (Max thickness ≤ 1.5 mm) - Head weight: 1.5 kg. * Model 10H: For tubes from Ø 6.35 to Ø 25.4 mm (Max thickness < 2 mm) - Head weight: 1.8 kg. * Model EC40: For tubes from Ø 6.35 to Ø 38.1 mm (Max thickness ≤ 2.5 mm) - Head weight: 3.5 kg * Model EC80: For tubes from Ø 12.7 to Ø 76.2 mm (Max thickness ≤ 3 mm) - Head weight: 5 kg. * Model EC120: For tubes from Ø 19 to Ø 114.3 mm (Max thickness ≤ 3 mm) - Head weight: 6.5 kg. * Model EC170: For tubes from Ø 50.8 to Ø 165.2 mm (Max thickness ≤ 3 mm) - Head weight: 14 kg. THE SUPPLY INCLUDES: -ET-200 power source and welding heads chosen during the configuration phase. -Complete connectivity (power cables, ground cable, water/gas hoses). -Operating and maintenance manual. -Nameplate and CE marking (compliance with Machinery, Low Voltage, EMC, and RoHS Directives). -Optional: Trolley for housing and joining tubes -Specific video training Don't miss out on the end-of-year promotion!

Condition: used, mileage: 61,800 km, power: 170 kW (231.14 HP), first registration: 01/2016, fuel type: diesel, empty load weight: 7,005 kg, maximum load weight: 4,985 kg, overall weight: 11,990 kg, tire size: 385/65R22.5, axle configuration: 4x4, wheelbase: 3,000 mm, next inspection (TÜV): 01/2027, brakes: constant throttle, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, loading space length: 2,385 mm, loading space width: 2,075 mm, loading space height: 400 mm, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, differential lock, onboard computer, power assisted steering, seat heater, trailer coupling, Vehicle location: en route / in transit, short cab, 2x comfort seats, seat heating, rear window, electric mirrors, heated mirrors, electric window on the left, air conditioning, sun visor, center console, constant throttle, auxiliary drive, raised exhaust, automatic transmission, differential lock, long-range headlights, work lights, rotating beacon, trailer hitch (air, light, hydraulic), aluminum fuel tank, winter service equipment, lashing eyes, green environmental badge. Wheelbase: 3000 mm, Body: 3-sided tilting body VarioPilot, reversing warning, front mounting plate DIN76060 Type B Size 3, tilting cylinder, hydraulic connector at the rear 4-way cell 1+2, pressure line at the rear 2nd hydraulic circuit, separate return line at the rear, hydraulic system 2-circuit 3-cell full proportion snowplow relief, high-performance engine brake, engine power take-off including front PTO, PTO speed limitation. Rodpfxszxh T Hj Ac Tecf Approximately 4520 operating hours! Snowplow and salt spreader available at an extra cost! All information is provided without guarantee as the vehicle is en route! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: excellent (used), Year of construction: 1972, Description to follow! Rcedozxh Ttjpfx Ac Tef

Condition: excellent (used), max. grinding diameter 175 mm Rodpozxh Tmsfx Ac Tocf

Condition: excellent (used), Year of construction: 1990, Description to follow! Rjdjzxh Tgepfx Ac Tecf

Condition: excellent (used), Year of construction: 1999, x-travel 500 mm y-travel 400 mm z-travel 400 mm Rodezxh Taspfx Ac Tjcf

Condition: excellent (used), Year of construction: 1973, Description to follow! Rcodpfx Acszxh S Ne Tef

Condition: excellent (used), Year of construction: 2001, OSP 100U control system Travel ranges X/Y/Z: 560 x 610 x 560 mm Spindle speed: 15,000 rpm Dual-pallet changer, 400 x 400 mm Tool magazine for 60 tools, SK 40 Chip conveyor Rcsdpfx Acozxh Spo Tsf

Condition: good (used), functionality: fully functional, machine/vehicle number: 2124, empty load weight: 700 kg, total length: 2,800 mm, total width: 1,850 mm, total height: 1,460 mm, Year of construction: 2009, Thermo tank from Geyer Type 3000, overall dimensions 2800 x 1850 x 1460 mm, weight 700 kg. Rcodpfozxh Sijx Ac Tef We will gladly send you more detailed information and additional images upon request. This description does not constitute a binding offer and may contain errors. No guarantee is given for the accuracy of all information.

Condition: used, Year of construction: 2007, Technical details: standard turning dia.: 42 / 140 turning length: 170 mm control: Mitsubishi max. turning diameter: 140 mm bar material dia.: 42 mm turning speed range - spindle: 80-8000 1/min spindle bearing diameter: 120 mm C-Axis: 0,001 ° turning speed range - spindle: 60-6000 1/min spindle nose: JIS A2-6 bar material dia. max: 42 mm collet chuck: 173E C-Axis: 0,001 ° Number of Turrets: 2 . Number of tool stations: 12 x 2=24 pos power capacity - driven tools: 7,5 / 5,5 kW total power requirement: 92,7 kVA weight of the machine ca.: 3,3 t dimensions of the machine ca.: 2,4 x 1,6 x 2,2 m Accerories Chip conveyor Coolantsystem Rodpfxezxh R Ej Ac Tecf The Boley BE 42 2 has 2 spindles und 2 turrets with 12 toolstations VDI 20 each. It can work simultaneus with 7 Achsen. The machine has ca. 22.000 run hrs. The coolant system has a cooling unit 15 collets 173E come with the machine. A bar feeder interface is installed. *

Condition: excellent (used), mileage: 14,173 km, power: 177 kW (240.65 HP), first registration: 05/1998, fuel type: diesel, axle configuration: 4x4, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro2, number of seats: 3, total length: 7,600 mm, total width: 2,500 mm, total height: 3,100 mm, Year of construction: 1998, = Additional options and accessories = - 3 chairs - Power take-off (PTO) = More information = General information Number of doors: 2 Cab: single Registration number: RD2447 Technical information Engine capacity: 5.958 cc Front axle: Steering Rear axle: Double wheels GVW: 12.000 kg Condition Technical condition: very good Visual appearance: very good Financial information Price: On request = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Rcjdpfezxh Rlsx Ac Tsf Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, functionality: fully functional, total width: 600 mm, total length: 900 mm, total height: 2,100 mm, Pie filling machine, brand Anko. Rcedpjzxh Rfjfx Ac Tsf

Condition: repair required (used), functionality: limited functionality, Year of construction: 2001, Installation for crushing waste from construction site bins and demolition concrete, manufactured by DBT. The technical specifications are presented in the attached documents. This machine will be sent to the workshop for a major overhaul of the jaw crusher drive system. The electric motors and gearboxes will be inspected. The unit will be disassembled and sandblasted before applying a rust-proof coating, followed by a two-layer varnish. CE marking will be applied. Rjdpfxezxh N Ue Ac Tjcf

Condition: good (used), mileage: 682,411 km, power: 368 kW (500.34 HP), first registration: 07/2022, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2022, Equipment: AdBlue, Bluetooth, EBS, air conditioning, cruise control, electric window regulation, electronic stability program (ESP), fog lights, fridge, navigation system, parking heater, power mirror, retarder, seat heater, second fuel tank, soot filter, spoiler, = Additional Options and Accessories = - Aluminum fuel tank - Roof spoiler - EPS (Electronic Power Steering) - Low-noise - Air horn - Particle filter - Radio/CD player - Sunroof - Sleeper cab - Side door - Seat heating - Auxiliary heater - Tool box - Xenon headlights Rcjdpfjzxh Nzox Ac Tof = Additional Information = Front axle: Steered; Suspension: Leaf spring Rear axle: Suspension: Air suspension Unladen weight: 8,267 kg Payload: 10,733 kg GVW: 19,000 kg APK (Technical Inspection): Valid until 07/2027 Technical condition: good Optical condition: good Vehicle number: Scania R500 / Retarder / Euro6 / 2 x Tank .: YS2R4X20005666398 Suspension: Leaf / Air Transmission: Automatic Air conditioning Retarder Engine brake Cruise control Cooler box Auxiliary heater Distance control assistant Lane keeping assist Emission standard EURO 6 2 x Tank No liability for printing and typographical errors, changes, prior sale, and errors. = Company Information = No liability for printing and typographical errors, changes, prior sale, and errors. Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email:

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total length: 4,000 mm, total width: 1,050 mm, total height: 2,000 mm, overall weight: 164 kg, input voltage: 230 V, working width: 4,000 mm, Bralyx: 200x105x110 cm Redpfx Aozxh Nujc Tecf Tire: 200x45x200 cm

Condition: good (used), axle configuration: 4x4, operating hours: 761 h, Shibaura SP1440 3-cylinder diesel engine 0.9-liter engine displacement Rcedpfjzxh I Rsx Ac Tof 4x4 / four-wheel drive 9 forward / 3 reverse gears Rear PTO shaft at 540 rpm Compact and maneuverable Equipped with a cabin Japanese quality and reliable technology Includes transport/ground scoop Includes towed spreader Heater €5750

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 08/2014, total length: 14,010 mm, total width: 2,500 mm, suspension: air, wheelbase: 8,940 mm, color: blue, Year of construction: 2014, Axle configuration Make axles: BPW Brakes: drum brakes Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Rcedpfx Acozxh Iwo Tjf Empty weight: 4.220 kg Carrying capacity: 36.780 kg GVW: 41.000 kg Maintenance, history and condition APK (MOT): tested until 03/2027 Technical condition: good Visual appearance: good Identification Registration number: ON-75-JR Additional information Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension - Twist-locks = Remarks = Krone SD 45FT / 4220 kg / Container Chassis / BPW + Drum