Huber Holzbearbeitungsmaschinen GmbH & Co. KG

Condition: excellent (used), CATALOG NO. 7920 Cgjlhjyrryfjccqrop TECHNICAL DATA Equipment: - Disc - Tape feeder - Guillotine - Glue tank (granulate) - 2 pressure rollers - Cutting unit – guillotine - 2 milling units for edge profiling - 2 scrapers – for removing excess glue - Minimum length of workpiece: 210mm - Minimum width of workpiece: 70mm - Thickness of workpiece for edgebanding: 8-45mm - Edge tape thickness: 0.4-2mm - Support extension from table - Feed motor: 0.25kW - Total power: 5.5kW - Extraction port diameter: 115mm - Dimensions (L/W/H): 2100x670x1320mm – Weight: 276kg ADVANTAGES – Unpainted – Austrian production – Very good condition – Documentation (DTR) – Used edgebander Net price: 14,900 PLN Net price: 3,550 EUR (at exchange rate of 4.2 EUR) (Prices may vary with higher fluctuations)

Condition: good (used), Year of construction: 2021, Used edgebander SCM Olimpic K360 - 11 m/min - 8 - 60 mm panel thickness - 0.4 - 6 mm edge thickness - machine length approx. 4,200 mm - weight approx. 1,200 kg - immediately available - few operating hours/metres (see photo) Cgjlheyrrpmjccqrsp If you have any questions, please let us know.

Condition: used, Edgebander Holzher Streamer 1057 Pre-milling cutters Glue application, GLUE JET cartridge system Suitable for PUR glue Equipped with glue discharge Pneumatic pre-cut guillotine Pressure rollers Final trimming saws adjustable at an angle Top and bottom milling units R1, R2 Corner rounding unit Celeyrq Eashccqrsgp Profile scraper Flat scraper Max edge height mm: 60 Max edge thickness in roll mm: 3 Feed speed 10m/min Comes with fluids Polishing unit

Condition: ready for operation (used), Year of construction: 2016, Numerically adjustable infeed fence Air flotation infeed table Anti-adhesive liquid spray system Pre-milling unit with diamond cutters Edge feeder for edge banding from coil or strips Glue station for GlueJet cartridges or L-Tronic laser technology 4 pressure rollers with pneumatic pressure adjustment Edge lubricant spray system Dual-motor precision end trimming unit with pneumatic angle adjustment Top and bottom edge surplus trimming unit (straight trimming) Cgslhccqoyrniijrop Numerically adjustable profile edge milling unit Flat scraper Profile scraper – two profiles Cleaning liquid spray system Pneumatically activated buffing units Pneumatically activated edge buffing unit Feed speed continuously adjustable from 10 to 25 m/min Automatic lubrication of the feed chain Frame support Minimum workpiece length: 140 mm Workpiece thickness: 8–60 mm Minimum workpiece width: 60 mm Year of manufacture: 2016

Condition: good (used), Year of construction: 2007, EDGEBANDING MACHINE WITH JOINTING AND COPY MILLING; RELEASE AGENT APPLICATION, MACHINE USED FOR PUR GLUING^ Technical Data: Workpiece thickness: 8 - 50 mm Edge thickness: * Fixed lengths: 0.4 - 8.0 mm * Coil material: 0.4 - 3.0 mm (max. 0.8 x 55 mm or 3 x 45 mm) Feed rate: 11 m/min Electrics: 400 V, 50 Hz, 3 Ph. Equipment: Adjustable infeed fence Centrally adjustable overhead pressure Central manual chain track lubrication Control panel at machine infeed Release agent application Jointing unit: 2 x 2.2 kW 1 clockwise, 1 counterclockwise Max. material removal: 3 mm Gluing station with clockwise and counterclockwise operation 1 main pressure roller and 2 post-pressure rollers End trimming unit: 2 x 0.18 kW Pulling cut for high precision Pneumatic adjustment for straight and chamfer cutting via program Flush milling unit: 2 x 0.55 kW With vertical and horizontal tracing 2 working positions selectable via program: flush and radius milling, all axis adjustments with digital counters for quick setup Profile milling unit: 2 x 0.35 kW For profile milling of edge corners Max. edge thickness: 3 mm Max. workpiece thickness: 55 mm With pneumatic 2-point adjustment for chamfer/radius Scraper unit with quick-change heads Tracing above, below, and laterally With 2 additional quick-change heads Glue line scraper device, Pneumatically controlled Tracing above and below Cleaning agent application Buffing unit: 2 x 0.09 kW Celhcceyrfh Noqrjgp With cleaning agent application Control system: POWER CONTROL PC 20 +

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Condition: unchecked Equipment and technical data: - Edgebanding thickness: 0.3-5 mm - Workpiece thickness: 6-45 mm - Minimum workpiece width: 60 mm - Minimum edge length: 200 mm - Feed rate: 11 m/min - Electrical connected load: 3.4 kW - Extraction port: 100 mm - Air requirement: 550 m³/h - Glue system: cartridge 1906 - Trim saws, front and rear: 1975 - Radius milling unit, top and bottom: 1942M - Radius scraper, top and bottom: 1929 - Buffing unit: 1941 K - Machine length: 3675 mm - Machine width: 1470 mm - Machine height: 1200 mm Weight: 950 kg Cgslhcsyq T Inecqrjp Availability: short-term Location: 63934 Röllbach

Condition: excellent (used), SCM S12 SW Industrial Thickness Planer – Made in Italy For sale: SCM S12 SW industrial thickness planer, manufactured by SCM Group (Italy). Heavy-duty professional woodworking machine, suitable for carpentry workshops and furniture manufacturing. SCM machines are renowned for their durability, precision, and robust industrial design. Technical specifications Model: SCM S12 SW Working width: approx. 520 mm Max working height: approx. 240 mm Power supply: 380 V / 3 Phase / 50 Hz Cutterhead: 4 knives Automatic feed system Year: 1990 Made in Italy Condition Cslhjyq Razjccqrjgp The machine is in good working condition and ready for use. Suitable for Carpentry workshops Furniture production Industrial woodworking

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, workpiece height (max.): 40 mm, edge thickness (max.): 3 mm, feed rate X-axis: 35 m/min, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 48, TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 40 mm Edge thickness min.: 0.4 mm Edge thickness max.: 3 mm Feed speed max.: 35 m/min PROCESSING UNITS Pre-milling unit Automatic engagement 48 tool positions End trimming unit 2 motors Fine trimming unit 1 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Fine trimming unit 2 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Edge scraping unit Glue scraping unit Polishing unit 2 motors Spraying device Colhccjyqybueqregp MACHINE DETAILS Control system: PC 22 EQUIPMENT Pressure applied with rubber belt Panel guides with NC positioning Glue pot for EVA hot-melt adhesive Pre-melter for EVA hot-melt adhesive Laser system (Model: LaserTec) Roller set for edge pressing with 5 pressure rollers Units mounted on safety guards CE marking The machine is sold and delivered in its actual and legal condition (“as seen and approved”), based on photo documentation and technical/commercial descriptive documentation. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 5321

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, working width: 1,935 mm, number of spindles: 40, plate height: 350 mm, working length: 6,200 mm, number of axes: 4, TECHNICAL DETAILS Working area X-axis: 6,200 mm Working area Y-axis: 1,935 mm Maximum panel thickness: 350 mm Number of edge tape magazines: 3 Number of tool positions in tool magazine: 22 (located at the rear of the machine) Drilling spindles Spindles for vertical drilling: 28 Spindles for horizontal drilling in X direction: 4 Spindles for horizontal drilling in Y direction: 8 Total number of vertical + horizontal spindles: 40 Milling spindles Number of controlled axes: 4 Motor power: 10.5 kW Automatic tool changer MACHINE DETAILS Celhccqjyqx U Hsregp Total connected load: 31 kW EQUIPMENT Suction cups for securing the workpiece Safety mats at the front Vacuum pump Waste chip conveyor Fixed groove unit for slotting in X direction The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the item prior to collection and assumes responsibility for installation, securing, and operation of the machine at the place of destination. External reference: 8105

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Features and technical specifications: - Round pot glue application unit - With second glue application unit for PUR processing - Feed unit with automatic edge band magazine - Pressure zone with multiple pressure rollers - End trimming: 2 motorized saw units for front/end cap cutting - Top/bottom milling units: 2 milling units with tracing wheels for radius or chamfering - Radius scraper blade: pneumatically operated, post-processing of radii - Surface scraper blade: for smoothing the edge surfaces - Polishing unit: 2 polishing wheels with motors for final finishing - Riepe spray device - Control: PLC with control panel - Feed frequency inverter replaced by Ott in 2022 - Feed speed approx. 10–12 m/min - Workpiece thickness up to 52 mm - Edge thickness 0.3 – 12 mm - Power supply 3x 400 V AC, 50 Hz - Rated power 12.7 kW - Rated current 30.5 A - Control voltage 24 V DC - Max. fuse protection 35 A (5x 6 mm² connection cable) Cgolhccqeyqanberop Machine dimensions: approx. 6120 x 840 x 1385 mm Machine weight: approx. 3,000 kg Availability: short notice Location: Röllbach

Condition: used, Year of construction: 2002, with jointing unit Total length: 6,790 mm Depth: 1,145 mm Max. height: 2,264 mm Workpiece support height: 850 mm Edging thickness: 0.4 - 25 mm Max. edging height: 66 mm Min. edging length: 200 mm Min. workpiece width: 60 mm Min. workpiece length: 140 mm (with 60 mm workpiece thickness) Max. workpiece length: approx. 6,000 mm Workpiece thickness min./max.: 6/60 mm Air requirement: 3,000 m³/h Extraction port diameter, main machine: 160 mm Extraction port diameter, jointing unit: 125 mm Weight: approx. 2,800 kg Storage location: Supplier Cgelhoypwk Deccqrsp

Condition: good (used), Code: 0316 Brand: HIRZT - ITALY Model: MIREA - CE Standard Automatic edge bander with hot melt glue for panels, furniture, custom-made furnishings, wooden doors, kitchens, bathroom furniture and various - CE Standard Technical data: Glue application on the panel Cgolhccjypm Tusqrep Panel height 10/50 mm Max edge thickness 1 mm Minimum panel dimensions 70 x 140 mm Automatic feed with belt drive - Feed speed 4 mt/min Power consumption 4 Kw Copying trimming unit: cutters mm 70 x 14 x 12 Z4 15 degrees Knife end trimming unit Extendable front support - Inlet extension - Worktable height 900 mm Overall dimensions mm 1900 x 1100 x 1250 h Weight kg 300

Condition: excellent (used), Year of construction: 2020, Homag Edgeteq S-200 Year: 2020 Specification: Feed Speed 11m/min Machine Length 4605mm Workpiece Thickness max 60mm Edge Material Roll 0-3-3mm Edge Material Strips 0.4-5mm Joint trimming / pre-milling (44mm high blocks) Standard EVA glue unit Pressure zone with 1 main pressure roller + 2 idel rollers with pneumatic adjustment for thickness End Trim unit with pneumatic adjustment for chamfer / straight Top and bottom trimming unit with 2mm cutters Contour trimming unit with 2mm cutters Profile scraping with pneumatic adjustment with 2mm blades Additional changeable scraping heads with 1mm blades Glue Joint scraper Buffers LED indoor lighting Control system easy touch Package for construction elements Basic v Package Central Lubrication 400V 50Hz Cgslhccqeypm Hhorsp CE

Condition: excellent (used), Year of construction: 2019, Specification 2 tanks Cgoleypm Dgohccqrep 1 cleaning station Suitable for right sided machine such as Edgeteq S-240, S-300 and S-380 400V 50Hz

Condition: excellent (used), Year of construction: 2019, Specification: Working height: 950mm Length: 4773mm Workpiece Thickness: 60mm Edge Material Roll: 0.4-3mm Edge Material Strip:0.4-6mm Adjustable Infeed Fence Workpiece Support Feed Speed 11m/min Central Lubrication Roller Top Pressure Manual Top Pressure Adjustment Separating Agent Spray Device Joint Trimming Unit 2x2.2kw Panel Pre-Heating QA65 Application unit for PUR Cgoleypm Avjhccqrsp Pressure Zone End Trim Unit Trimming Unit Counter Trimming unit Radius Scraping Unit with 2 sets of quick change heads Glue Joint Scraping Detergent Spraying Unit Buffers 400V 50Hz CE XES 200 with 2 tanks and 1 cleaning station including collecting tray.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Edge band thickness from 0.4 to 5 mm Panel height from 8 to 50 mm Max table thickness: 60 mm Premilling Glue with interchangeable Teflon-coated tank Multifunction finishing unit Cgolsyplmyjhccqrop Corner rounding Spray systems for release agents or lubricants Sanding unit End trimming unit Radius/corner scraper unit Glue scraper Brushing unit Control: Touchscreen panel Total power: 8.4 kW

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, - Max. feed rate: 11 m/min - Max. edge thickness: 3 mm (coils), 8 mm (strips) - Max. workpiece thickness: 50 mm - Joint milling cutter - Gluing unit Cgslhccsypbzysqrep - End trimming unit - Milling unit - Corner copying unit - Scraper blade – radius & flat - Buffing (polishing) unit

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, - Max. feed rate: 16 m/min - Max. workpiece thickness: 60 mm - Max. edge thickness: 3 mm (rolls), 12 mm (strips) - Jointing cutter - Gluing unit Cslhcoypbugjcqrjgp - End trimming - 2x milling - Corner copying unit - Scraper (radius + flat) - Buffing - Release agent spraying !!! Including return conveyor !!!

Condition: ready for operation (used), Year of construction: 2005, Edgebander manufactured in 2005. This OTT Twister features a hot-cold melt adhesive application process and can handle edge thicknesses from 0.3 to 10 mm. It supports workpiece thicknesses of 8 to 60 mm and has a feed speed of 14-20 m/min. If you are looking to get high-quality edge banding capabilities, consider the OTT Twister edgebander we have for sale. Contact us for further details. • Adhesive application: Hot/cold melt adhesive process; application roller with synchronous and counter-rotation • Edge thickness: 0.3–10 mm • Workpiece thickness: 8–60 mm • Workpiece width: minimum 70 mm • Workpiece length: minimum 150 mm • Operating pressure: 6 bar • Feed power: 3.0 kW • Feed speed: 14–20 m/min • Electrical connection: 3x 400 V, 50 Hz • Extraction requirement: 1x Ø180 mm at 20 m/s = 35 m³/min • Air speed (minimum): 20 m/s • Compressed air consumption: approx. 300 l/minProcessing units / equipment on the machine: • Joining: • 2 x 2.2 kW, n=14,600, 250 Hz; two application-controlled working spindles • Combi-melt gluing unit: • Top-mounted, changeable hopper for EVA, PUR hot melt adhesive or cleaning granulates; hopper volume 2.5 l • AKM (automatic edge magazine): • Automatic edge magazine with optical monitoring for strip edges in fixed lengths • Capping: • 2 x 0.8 kW, n=12,000, 200 Hz; automatic swivel 0°/5°; 2 HM saw blades Ø140 x 3.2 x 16, z=34 • Flush milling: • 2 x 0.7 kW, n=12,000, 200 Hz; single-sided probing; 2 carbide-tipped indexable knife heads HF70, Ø70 x 20 x 16, z=4 Cgelhccoyn I U Reqrop • Fine milling (bevel 15°/30°/45°): • 2 x 0.3 kW, n=12,000, 200 Hz; double-sided probing; 2 carbide indexable insert cutter heads HF70, Ø70 x 20 x 16, z=4 • AWSR (radius R2–R5): • 2 quick-change sets for fine milling cutter, 2 x 0.3 kW; 2 carbide indexable insert cutter heads AR73 x 16 x 16, z=3, R2–R5 • AKF (copy milling): • Automated copy milling with two separate working spindles for end faces and longitudinal radii; 2 x 0.37 kW, 12,000 rpm; tools R1–R3 • Scraper blade: • 2 x carbide scrapers, automatic feed • Surface scraper: • 2 x carbide scrapers, with fine adjustment device • PU set: • 5-way spray device (2 x release agent, 1 x lubricant, 2 x cleaning agent), fine buffing device with cloth disc • Edge cleaning: • 2 x 0.2 kW, n=2,800, 50 Hz, oscillating brushes

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 0-200-07-9819, Type: KAL210 / EDITION Machine no.: 0-200-07-9819 Year: 2011 Single-sided machine for machining straight workpiece edges. Edge banding and post-processing of various edge banding materials, in through feed lengthwise and crosswise. POWER CONTROL control PC22 Control system Windows PC Hardware: PLC control Integrated stretch control for contact-free control of the machining units Operating system Windows XP Industrial PC 10" TFT monitor with touch screen, selection and setting of all necessary production parameters, such as: program selection and workpiece thickness adjustment. PC keyboard and mouse USB connection Network connection Remote control Setting operation, start feed, emergency stop switch Unit equipment: -Release agent application unit Cjlheyn Ilpsccqrjgp -Joint milling unit -Glue unit A20 with 2 rollers -Cutting unit HL84 -Pre-milling unit -Shape milling unit FF32 -Universal milling unit UF10 -Profile sanding unit PN10 -Finishing unit (glue joint sanding unit + polishing brushes) Technical data Minimum workpiece width: for thicknesses 12-22 mm, 60 mm for thicknesses 23-40 mm, 105 mm Workpiece overhang 30 mm Workpiece thickness 12-60 mm Molding material on roll 0.3-3 mm Molding cross-section max: For PVC 135 mm2 For veneer 100 mm2 Molding material strips 0.4-20 mm Edge cross-section for strips 900 mm2 Working height 950 mm Pneumatics 6 bar Power 400 volts, 50 Hz, 3-phase NOTE Subject to incorrectly published technical data.

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, edge thickness (max.): 15 mm, overall weight: 4,000 kg, OTT edge banding machine type Strom+ Optional with return system TransCompakt or TransLift. The machine is factory reconditioned and is sold with warranty in Germany. New tools, new chain plates and belts. For PUR glue and EVA glue. Alternatively, we also have access to a Tornado+ and StrongEdge, both factory reconditioned. Cjlheyn Am Isccqrogp

Condition: good (used), Hebrock 3007 DK F Edge Bander Well equipped, inspection possible before purchase Pre-milling cutters Glue application with roller, Tank has quick-change function Pneumatic pre-cut guillotine Pressure rollers Finishing trim saw Top and bottom milling unit, R1 – R2 pneumatically adjustable Profile scraper activated from the control panel Corner rounding unit pneumatically adjustable Milling aggregate Flat scraper Cgslhccjynz Uwjqrep Polishing unit Grooving saw unit Max workpiece height 50mm Max edge thickness in roll: 3mm Feed rate: 10m/min In good condition, fully operational Workpiece exits finished and ready

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Compact and flexible in the smallest of spaces. Workpieces receive their finish within a length of just 2.13 m. Equipped with a 1.1 kW high-frequency motor joining unit and diamond-tipped spiral joining cutter, Teflon-coated glue unit, pre-end trimming unit, and HF multifunction milling unit. Two free slots for finishing units, such as a surface scraper and polishing unit. Simple operation via 3.5'' color touchscreen. Technical data Machine length: 2,122 mm Workpiece thickness: 10–45 mm Minimum workpiece width: approx. 120 mm Colhcjynu A Uocqrogp Edge thickness: 0.4 – 2.0 mm Edge height max.: workpiece height + 4 mm (2+2) Electrical connection: 400 V Total connected load: 3.6 kW Feed speed: 6.5 m/min Pneumatic connection: 6 bar Net weight: approx. 490 kg Options: Surface scraper unit Diamond tools, height = 45 mm Location: Flörsheim Availability: short-term

Condition: good (used), Year of construction: 1988, functionality: fully functional, PLC control Workpiece thickness max 60 mm Edging thickness for roll material 0.4 - 3 mm Edging thickness for strip material 0.6 - 20 mm Edging thickness for strip material (without flush trimming) 30 mm Minimum workpiece width 60 mm Minimum workpiece length 140 mm 1901 Automatic edge feed for strip/roll material 1907 Glue application for panel thickness up to 60 mm, "Ultra-Granu-Press" granulate heating time approx. 3 - 4 minutes 1911 Pressure unit up to 30 mm edging thickness 1916 End trimming unit 2 x 1.1 kW up to 30 mm edging thickness 1920 Flush trimming unit 2 x 1.1 kW up to 20 mm edging thickness 1966 Profile trimming unit, flush/chamfer/radius up to R = 3 mm 1927 Scraper unit, pneumatically controlled 1944 Buffing unit 2 x 0.15 kW, automatically actuated Feed rate 8/16 m/min Length 5720 mm Cgjlsyntq Dshccqrjp

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Condition: Currently still in production Equipment and technical data: Cjlsynpc Njhccqrsgp Glue pot Pressure zone Cut-off saw Combination milling (radius 2 mm), flush trimming Workpiece thickness: 8 - 50 mm Minimum workpiece width: approx. 75 mm Minimum workpiece length: approx. 120 mm Edge thickness: 0.4 - 3.0/5.0 mm Maximum edge height = workpiece height + 4 mm (2+2) Electrical connection: 400V, 50 Hz, 3-phase Total connected load: 3.2 kW Feed speed: 8.0 m/min Pneumatic connection: 6 bar Net weight: 550 kg Optional retrofits for the machine: Radius scraper Flat scraper Buffing unit Location: NRW Availability: Approx. December 2025