PATSCH Werkzeugmaschinen und Retrofit

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Machine-Details: Stock-No. 1022-2413 Type of machine Lathe - cycle-controlled Make SEIGER Type SLZ 700 E x 3000 Year of manufacture 2005 Type of control CNC Storage location Germany Country of origin Germany Delivery time Immediately Freight basis Ex warehouse, loaded on truck Technical details: swing over bed 730 mm centre distance 3000 mm control Heidenhain MANUALplus4110 Additional information: Very well-maintained cycle lathe with only 15652 operating hours. Working area: Center distance 3000 mm Swing diameter over bed 730 mm Swing diameter over cross slide 450 mm Bed width 480 mm Main spindle: Bdodpfxsxzp Nzs Agcjk Spindle mount according to DIN 55027 size 11 Spindle bore 130 mm Spindle diameter at front bearing 170 mm Spindle taper 1:20 Tap in center sleeve MT 6 Main drive: AC drive with 2-stage ZF gearbox (automatic shifting gearbox) Drive power (100/60% duty cycle) 22/28 kW Total speed range 1 - 2200 rpm Maximum spindle torque: approx. 2200 Nm X-axis (cross slide) performance data: Maximum travel: 400 mm Feed force: 14 kN Speed: 4 m/min Z-axis (bed slide) performance data: Feed force: 18 kN Speed: 7 m/min Max. workpiece weight: Between centers without steady rest: 2000 kg With one steady rest: 2200 kg With two steady rests: 2500 kg In the chuck: 750 kg Tailstock: Quad diameter: 115 mm Quad stroke: 225 mm Quad taper: MK 6 Equipment and accessories: Heidenhain MANUALplus 4110 CNC control SCHUNK ROTASplus 400-102 3-jaw manual chuck 2 steady rests PARAT tool holder Chip conveyor Coolant system Work area enclosure with two sliding doors. The machine is sold without a boring bar holder and boring bar.

Condition: excellent (used), MAZAK INTEGREX 400-3S is a CNC Turning-Milling-Drilling Center designed for precision, high accuracy and reliability. Capacities: distance between centres 1500 mm, swing 760 mm, max turning length 1524 mm, bar passage 102/77 mm, tool magazine 40 stations (Ø max 90 mm, L 400 mm). Main specs: main spindle A2-8 stepless 35–3300 t/min 30 kW 1200 Nm; back spindle A2-8 35–4000 t/min 26/22 kW 500 Nm; milling spindle CAPTO C6 15–12000 t/min 18.5 kW 120 Nm. Travels X630 Y±115 Z1585 mm; feeds 0–8000 mm/min; rapid X/Z 38 m/min Y26 m/min; weight ~13300 kg; footprint 5110x2196 mm; height 2798 mm. Equipment: coolant 444 l (15 bar through milling spindle), Forkhardt 3-jaw chucks Ø400/315 mm, linear scale for X, RS232, PCMCIA, spindle sync, chip conveyor, synchronized tapping, foot pedal. Enables tight tolerances; typical applications: automotive, aerospace, medical, machine tools, watchmaking. Bjdpfoxx U N Isx Agcjdk

Condition: used, Year of construction: 2017, functionality: fully functional, turning length: 3,000 mm, turning diameter: 805 mm, Used CNC cycle lathe with C-axis, featuring the following specifications: Distance between centers: 3,000 mm Center height: 400 mm Swing diameter over bed: 805 mm Swing diameter over carriage: 720 mm Swing diameter over cross slide: 515 mm Cross travel: 400 mm Carriage length: 900 mm Cross slide length: 750 mm Bed width: 425 mm Spindle bore: 105 mm Spindle nose: A2-8/8 Spindle taper: MT 5 Speed range: 1st range: 0 – 425 rpm 2nd range: 425 – 1,700 rpm Feed rate: 0 – 7,000 mm/min Rapid traverse Z-axis: 10,000 mm/min Rapid traverse X-axis: 10,000 mm/min Ball screw Ø Z-axis: 50/10 mm Ball screw Ø X-axis: 32/5 mm Tailstock quill Ø: 106 mm Tailstock quill stroke: 215 mm Tailstock taper: MT 6 Number of tool stations: 12 Tool shank: 32 mm Boring bar: 50 mm Positioning accuracy: 0.01 mm Repeatability: 0.01 mm Motor power: 17 kW Pump motor: 0.57 kW Flow rate: 50 l/min Coolant tank capacity: 225 l Machine dimensions (LxWxH): 5557 x 2077 x 2227 mm Machine weight approx.: 6,460 kg Standard equipment: • CNC control, Fagor brand, model 8055 • Z/X-axis servomotors • Electronic handwheel for X and Z-axis • Servo spindle motor • Coolant system • Spindle sleeve and fixed centre MT 6 • Partial enclosure • Automatic shifting gearbox by Baruffaldi • Automatic lubrication system • Manual tailstock • Work light • Leveling bolts and nuts • Operating and programming manuals in German • CE version including CE Declaration of Conformity • For connection 400V, 50Hz, 3-phase Special equipment: • “C-axis”, continuous positioning • 1 piece 12-station disc turret, Baruffaldi brand, model TBHMA200-12, for live tools with VDI 40 mount • 2 pcs radial tool holders for live tools, VDI 40, type PRR-S-40-ER32/50-T • 1 pc axial tool holder for live tools, BMT65-A-ER32/50-T • 1 pc hydraulic chuck, Ø 400 mm, hydraulic cylinder Ø 92 mm, and hydraulic tailstock quill • Renishaw tool measurement system on the machine • 1 pc chip conveyor • 1 pc fixed steady rest for Ø 10–300 mm • 1 pc fixed steady rest for Ø 300–530 mm • 1 set soft jaws for Ø 400 mm chuck • 1 set hard jaws for Ø 400 mm chuck By the way, besides competitively priced new machines and inspected used machines, you can also expect more from us: • On-site consultation and solution finding Bdjdpoxr U H Hjfx Agcok • Organization of transport to your facility • Installation, commissioning, and handing over ready for operation • Spare parts supply • Control training for Siemens, Heidenhain, and Fanuc • Trained service personnel also in your area, etc. • 24/7 telephone availability • Tax-optimized trade-in of your old machine • Favorable financing, even without down payment Enquire now! Image shows machine as a new version with 2000 mm center distance.

Condition: like new (used), Year of construction: 2022, operating hours: 105 h, functionality: fully functional, Haas ST50 Horizontal Turning Machine Slant Bed Lathe. Bought new directly from Haas and installed in Early 2023. As a "last of line" model from Haas (which they've yet to make this size since), this machine is fully loaded and as you can see from the build list below it is very well spec'd. It also only has 105 hours use. Viewing advised and welcome at our workshop in Canterbury, Kent. Videos can be sent and or uploaded to Youtube also. This machine and others we are selling are also listed else where. Please get in touch with us at Showan Hydraulics, Barham, Kent if you require any further details. Bodpfxjxrf Sts Agcsdk £325,000 + VAT PRODUCT OVERVIEW • Maximum Capacity: 25.5" x 80" (648 x 2032 mm) • Spindle Bore: 8.5" (216 mm) • Swing Over Bed: 34.5" (876 mm) • Main Drive: 55 hp (41 kW) vector drive • Spindle Speed: 1200 rpm, 2-speed gearbox • Spindle Nose: Front and rear A2-15 • Chucks: 25" (635 mm) Manual 3-Jaw and 4-Jaw Chucks • Turret: 12-station bolt-on turret • Tailstock: Programmable servo with MT6 quill • Control System: 15" touchscreen interface with USB port, memory lock keyswitch, and colour remote jog handle • Additional Features: Rigid tapping and variable flow coolant pump _____ STANDARD FEATURES • Bolt-On Toolholder Kit: Comprehensive set of toolholders, sleeves, coolant block, and turning stick clamps for flexible setup. • 1200-RPM Spindle: Powerful 55 hp (41 kW) A2-15 spindle with 2-speed gearbox for optimal torque and speed. • Program Memory: 1 GB onboard memory for program storage and backup. • Coolant System: 95-gallon (360 L) tank with 3/4 hp (0.6 kW) pump del

Condition: used, Year of construction: 2014, total height: 1,950 mm, total length: 2,400 mm, total width: 1,600 mm, Empty weight: 2.000 kg Price: On request - Year: 2014 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 3098034 - Drive system: CNC - Centre height [mm]: 450 - Swing over bed [mm]: 900 - Distance between centres [mm]: 900 - Bed width [mm]: 445 - Spindle bore [mm]: 60 - Max. spindle speed [rpm]: 1800 - X-axis travel [mm]: 203 - Z-axis travel [mm]: 762 Bjdpfx Agexq Aqwjcjdk - Transport dimensions: 2400mm x 1600mm x 1950mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Technical data: Centre height: 415 mm Centre distance: 1,500 mm Swing diameter over bed: 830 mm Swing diameter over cross slide: 500 mm Bed width: 500 mm Spindle bore: 105 mm Spindle nose: Camlock 11" Speed range: 0 - 1,500 rpm Motor power: 22 / 29 kW Equipment: - FAGOR 8055 CNC control Bdsdpfx Agoxpguwocsk - Turret with 8 positions (VDI 40) - 8 tool holders (VDI 40) - 3-jaw chuck ø 315 mm - Steady rest - Set of levelling elements - Chip conveyor

Condition: ready for operation (used), Year of construction: 1985, functionality: fully functional, turning diameter over cross slide: 490 mm, spindle speed (max.): 2,800 rpm, turning diameter over bed slide: 720 mm, center width: 1,765 mm, controller model: EPL 4, Equipment: chip conveyor, TECHNICAL DETAILS Distance between centres: 1,765 mm Spindle bore: 101 mm Swing diameter over bed: 720 mm Swing diameter over cross slide: 490 mm Max. chuck diameter: 400 mm Speed range: 10 - 2,800 rpm Quill taper: MK 5 Tool holder type: 2 x VDI 50 MACHINE DETAILS Control: EPL 4 Drive power: 50 kW Approx. machine weight: 16 t EQUIPMENT Driven tools Tailstock Bodpfxexn Iyls Agcodk Automatic quill travel Chip conveyor Automatic sliding safety doors Hydraulic steady rest 2 turrets

Condition: reconditioned (used), Year of construction: 2003, Universal Lathe GILDEMEISTER NEF 320 K With Siemens SINUMERIK 810 DE control (SIMATIC PANEL TOUCH SCREEN) Year of manufacture: 2003 Spindle bore: 52 mm Distance between centers: 750 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 150 mm Cross slide travel: 185 mm Infinitely variable speed range: 14 – 3550 rpm Including the following accessories: Sliding guard with internal lighting Multifix tool holder with 2 inserts 3-jaw chuck SCHUNK ROTA plus Ø 200 mm Bsdpfx Agjxn Ar Ascsdk 2 sets of soft top jaws Coolant system Chip blow gun 6 machine feet Operating manual The machine is in very good condition!

Condition: used, Year of construction: 2023, Technical details: turning diameter: 770 mm turning diameter over slide: 650 mm turning length: 750 mm max. diameter of work permitted:: 82 mm y-axis: +/- 60 mm turret (x-stations): 12 VDI 40 turning speeds: 4.000 1/min tail stock: ja total power requirement: 47 kVA weight of the machine ca.: 7,8 t dimensions of the machine ca.: 3,3 x 1,9 x 2,3 m Accerories main spindle power 16 / 24 kW CNC lathe, NC-tailstock, C-axis with brake, live tooling (10,5 kW, 5.400 rpm), 3-jaw chuck SCHUNK ROTA THW 260-81, chip conveyor, prepared for oilmist suction, parts catcher and belt (right side), coolant device 300l, 8/20bar, Bdsdpfx Asxhd Ufjgcek accessories (8pcs. live-toolholder...) approx. 3.000 working hours *

Condition: good (used), Year of construction: 2008, turning length: 2,000 mm, feed rate X-axis: 3,000 m/min, feed rate Z-axis: 3,000 m/min, HeidenHain ND780 3 Axis dro Variomatic RPM speedrange  Steady rest Multi fix Tool system DBC Turning Length: 2000mm Swing over bed Ø: 830mm Swing over cross slide Ø:420mm Swing in the gap Ø: 1000mm Gap length: 295mm Spindle bore: 110mm Bed width: 560mm Tailstock spindle Ø: 105Ø Stroke pinole: 225mm Spindle taper: 6Mk Power: 15kW Speeds / ranges: 2000Rpm Feed rate X-Axis: 3000mm/min. Feed rate Z-Axis: 3000mm/min. Workpiece load: 2400 Length: 3700mm Width: 1900mm Bedpfx Ajxf Ey Rogcsdk Height: 1900mm Weight: 5500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Binns & Berry Versa Turn 7 x 7000mm CNC Lathe Serial Number 300013 Year 2011 800mm 4 Jaw, 1000mm Swing Over Bed, 7000mm Between Centres, 104mm Spindle Bore Spindle Speeds 1.5 – 1200 RPM, Main Motor 37kw / 50hp Tailstock, Steadies, 12 station turret, Bedpfxjw U Ulcj Agcodk Fanuc OiTD Control Swarf Conveyor

Condition: good (used), Binns & Berry Versa Turn 6 x 6000mm CNC Lathe Bsdpfxsw U Uihj Agcedk Serial Number 300014 Year 2011 2 x 800mm 4 Jaw Chuck, Front & Rear with 325mm Spindle Bore 325mm Hollow Spindle, Spindle Speeds 1.5 – 550RPM 850mm Swing Over Bed, 6000mm Between Centres, Max Weight 8000kg Main Motor 37kw / 50hp Turn Through Steadies, Fanuc OiTD Control 4 Way Auto Toolpost, Swarf Conveyor

Condition: used, Year of construction: 1999, functionality: fully functional, Equipment: documentation/manual, For sale is a robust and precise cycle lathe WEILER E90 x 4500, year of manufacture 1999, featuring a large swing diameter and cycle control – ideal for heavy workpieces up to 6000 kg. The machine is in technically good condition and was most recently used in industrial production. It is perfectly suited for single-part and small-batch manufacturing of large components. The machine is equipped with cycle control, a steady rest, and a tailstock with large quill travel. Bjdpow Idx Sofx Agcjdk

Condition: used, Year of construction: 2008, turning diameter 720 mm turning length 3000 mm centre height 360 mm spindle bore 106 mm turning speed range 1 - 1800 U/min tailstock quill taper MT 6 workpiece weight max. 3800 kg total power requirement 36 kW weight of the machine ca. 6100 kg dimensions of the machine ca. 4800 x 2450 x 2000 mm CNC lathe - cycle-controlled Bodpfx Aow A Sqmogcjdk Equipment: - Chip conveyor - Coolant device - 3-jaw chuck Ø630 mm - MUTLI-FIX quick-change holder - Live center - Machine light

Condition: good (used), turning length: 6,000 mm, spindle bore: 260 mm, Swing over bed Ø: 850mm Swing over cross slide Ø:500mm DBC Turning Length: 6000mm Spindle bore: 260mm Spindle power: 28kW Bed width: 650mm Stroke pinole: 300mm Bodpfx Agjwvtg Ajcedk Spindle taper: 6Mk Workpiece weight: 5000 Length: 10000mm Width: 2100mm Height: 2600mm Weight: 12800kg

Condition: good (used), Year of construction: 2003, Daewoo Heavy Puma 600 CNC Turning Centre with Fanuc Series 18i-T CNC Control, Chuck size 610mm, X axis 900mm, Z axis 1575mm, Spindle speed 1400rpm, 12 Station Turret and programmable Tailstock, Mills Swarf and Coolant Conveyor System, Machine weight 16100 kgs, fitted with Tool Presetter. S/No. PM600042 (2003) Bdjdpowvbubofx Agcek

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, turning diameter over cross slide: 470 mm, turning length: 3,000 mm, turning diameter: 720 mm, spindle bore: 104 mm, CNC Lathe Geminis 4 Plus 720 x 3000 mm Description Manufacturer: Geminis Model: CNC 4 Plus Control: CNC Fagor 8055 FL-BT Capacities: Distance between centers: 3,000 mm Swing over bed: 720 mm Swing over cross slide: 470 mm Spindle bore: 104 mm Tailstock diameter: 100 mm (Morse 6 taper) Bed width: 550 mm Speeds: 2 speed ranges: 0–1600 rpm Rapid traverse: X-axis: 8 m/min Bdjdpowuligsfx Agcok Z-axis: 8 m/min Motor: Power: 22 kW Weight: 8,000 kg Equipment: CNC Fagor 8055 FL-BT 3-jaw SHUNK Rota-S Plus chuck Ø 315 mm Additional 3-jaw chuck Fixed steady rest Chip conveyor General condition: Lathe in excellent condition

Condition: good (used), turning diameter over cross slide: 570 mm, turning length: 6,000 mm, turning diameter: 840 mm, Manufacturer: L&W Type: FB 33240 Control: Siemens 840D Solution Line Year of manufacture: 2021 3-jaw chuck SCHUNK ROTA-S Plus 500-102 3 x Fixed steady rest Duplomatic VDI turret Siemens 840 DSL Bodpfxewtdz Es Agcsdk This type of lathe is commonly used in industries such as: - Oil & gas (pipe threading, tool joint machining) - Steel industry (roll turning) - Power generation (turbine shaft turning) - Heavy machinery manufacturing Specifications Metric US Standard Turning length: 6000 mm Swing over bed: 840 mm Swing over cross slide: 570 mm Spindle bore: 105 mm Spindle power: 33 kW Bed width: 450 mm Quill diameter: 220 mm Spindle taper: 5 MT Spindle speed: 1200 rpm Feedrate X-axis: 5000 mm/min Feedrate Z-axis: 7000 mm/min Workpiece weight: 2500 kg Dimensions (approximate) Length: 9500 mm Width: 2300 mm Height: 2300 mm Weight: 8600 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Therefore, it does not constitute representation or contractual terms. We recommend verifying all critical details.

Condition: good (used), Year of construction: 2003, Machine weight: 8100 kg Brand: FANUC Model: 21i-TB Series Spindle speed range: 3500 rpm Spindle motor power: 18.5/22 kW Spindle diameter: 75 mm Number of tool slots: 12 Rotating tools: Yes Tool holder type: VDI40 Chip conveyor: Yes External coolant: Yes Chip conveyor: Yes Tool positioner: Yes Bdedpfx Aewqx R Asgcsk Tool holder: Yes Bar feeder interface: Yes Rotating tool speed: 4000 rpm Rotating tool power: 5.5 kW Bed swing: 650 mm Carriage swing: 300 mm Maximum workpiece length: 1000 mm Diameter from the mandrel: 250 mm

Condition: excellent (used), Year of construction: 2011, FANUC 32i A CNC Control Spindle Hours: 8,541h Technical Details Travel over Slide: 900 mm Turning Length: 3,200 mm Travel over Bed: 1,030 mm Standard Turning Diameter: 750 mm Spindle Bore: 110 mm X Stroke: 471 mm Z Stroke: 2,100 mm Rapid Feed - Longitudinal/Transverse: 15/20 m/min Spindle Speed: 3,000 rpm Spindle Motor: 45 kW Turret: 12/6 BMT 85 Electric Motor: Tools: 7.5/5.7 kW Driven Speed: Tools: 3,000 rpm Total Power Requirement: 62.2 kVA Machine Weight: Approx. 22 t Dimensions: 7,357 x 2,710 x 2590 mm Accessories: 12-position turret for driven tools Hydraulic tailstock Sandvik Capto C6 tool holders – 4 pcs Bdedswqpn Ejpfx Agcsk Hydraulic chuck Ø630 mm SMW Autoblock Hydraulic steady rest (min. 110 mm, max. 530 mm)

Condition: excellent (used), Year of construction: 2014, operating hours: 2,000 h, Doosan Puma Heavy Duty CNC Lathe Model: 700 L Year: 2014 - October Bedpfx Agswqf U Iocodk Control: Fanuc 31i – Model B Turning Dia.: 900mm Turning Length: 3200mm Max Swing: 1030mm Spindle Bore: 160mm Spindle Speeds: To 1500 RPM Machine With: 750mm 3 Jaw Power Chucks Programmable Steady

Condition: used, Year of construction: 2014, functionality: fully functional, turning length: 3,200 mm, turning diameter: 900 mm, spindle speed (max.): 1,500 rpm, travel distance X-axis: 470 mm, travel distance Z-axis: 3,235 mm, spindle motor power: 45 W, total height: 2,780 mm, total length: 7,360 mm, quill travel distance: 150 mm, quill diameter: 160 mm, swing diameter over cross slide: 800 mm, overall weight: 21,800 kg, swing diameter over bed slide: 1,030 mm, bar passage: 164 mm, spindle nose: A1-15, Doosan Puma 700L Large Capacity Lathe Built 2014 Bdodpfowqf Uuox Agcjk Accessories include Swarf Conveyor, Tailstock with Mt #6 Taper, SMW Hydraulic Steady, 800mm 3 Jaw Chuck, FANUC 32i Control.

Condition: good (used), Weiler E70 Hollow Spindle CNC Lathe Year: 2003 Distance Between Centres: 2000mm Spindle Bore: 8" (200mm) Machine with: Bedpfx Aswmqkysgcsdk Front & Rear chucks Tailstock Fixed Steady

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, turning diameter over cross slide: 580 mm, turning length: 3,000 mm, turning diameter: 850 mm, spindle bore: 130 mm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 7 m/min, feed length Z-axis: 20,000 mm, feed rate X-axis: 16,000 m/min, turning diameter over bed slide: 850 mm, Technical Data SEIGER SLZ-850-3000 Working Area: Distance between centers: 3,000 mm Swing diameter over bed: 850 mm Swing diameter over cross slide: 580 mm Cross slide travel: 500 mm Bed width: 560 mm Turning tool: Cross-section (height x width): 32 x 32 mm Spindle: Spindle nose acc. to DIN 55027: Size 11 Spindle diameter at front bearing: 170 mm Spindle bore: 130 mm Chuck diameter: mm Main drive AC: Drive power 100%/60% duty cycle: 37/52 kW Max. spindle torque: 6,000 Nm Total speed range: 1–1,600 rpm Feed drive AC: X-feed force 100% duty cycle (transverse): 16,000 N Z-feed force 100% duty cycle (longitudinal): 20,000 N X rapid traverse: 4 m/min Y rapid traverse: 7 m/min Tailstock: Quill diameter: 140 mm Quill stroke: 350 mm Quill taper (internal taper): MK 6 Steady rest (fixed): Passage (max.): 450 mm X-axis: Torque: 27 Nm Z-axis: Torque: 50 Nm Additional hydraulics for chuck: Delivery flow: 24 l/min Pump pressure: 50 bar Tank capacity: 90 dm³ Impulse lubrication: Delivery flow: 0.1 l/min Pump pressure: 30 bar Tank capacity: 2 dm³ Circulating lubrication: Delivery flow: 5 l/min Pump pressure: 0.4 bar Tank capacity: 40 dm³ Permissible workpiece weights: Between centers without steady rest: 5,000 kg Between centers with one steady rest: 6,000 kg Between centers with two steady rests: 7,000 kg Bsdpfswk Nxdex Agcsdk Flying in the face plate (center of gravity distance 250 mm): 1,800 kg Weights: Machine: 14,000 kg Frame: 3,500 kg Additional hydraulics: 300 kg Electrical control cabinet: 1,000 kg Space requirement: Machine fully assembled with extraction unit: 8,500 x 5,000 x 3,200 mm Machine fully assembled without extraction unit: 8,500 x 5,000 x 2,500 mm Dimensions (L x W x H): Machine, 3,000 mm center distance, without guarding: 6,400 x 2,200 x 2,300 mm Frame: 7,700 x 1,300 x 2,500 mm Additional hydraulics: 800 x 500 x 900 mm Electrical: Supply voltage: 400 VAC ±10% Rated frequency: 50 Hz Max. current consumption: 200 A Control supply voltage: 24 VDC ±10% Main drive power consumption: 52 kW Impulse lubrication pump power consumption: 0.22 kW Circulating lubrication pump power consumption: 1.0 kW Additional hydraulics pump power consumption: 2.2 kW Model designation key: SLZ-850-3000 Lathe: SLZ Swing over bed: 850 Workpiece length between centers Machine has been dismantled, no longer under power.

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 14038, turning diameter over cross slide: 470 mm, turning length: 4,000 mm, turning diameter: 720 mm, spindle bore: 104 mm, spindle speed (max.): 1,600 rpm, Geminis GHT 4 G2 - 700 x 4000 G teach-in lathe with Heidenhain control. Specifications: Heidenhain control Turning diameter over the bed 720mm Turning diameter over the cross slide 470mm Distance between the centers 4000mm Main spindle passage 104mm Speed 0-1600rpm Motor power 17kW Dimensions 6600x2300mm Weight approx. 6500kg Machine equipped with: 4-jaw fixed steady Bdjdpjwf U Eljfx Agcsk Parrat betel holder with 3 holders Chips conveyor