Redisa

Year of construction: 2009, Condition: ready for operation (used), A Dixi cardboard baling press is available. Pressing force: 180kN, cycle time: 22s, pressing time: 12s, filling opening X/Y: 1070mm/620mm, filling opening height: 980mm, bale dimensions X/Y/Z: approx. 1100mm/700mm/700mm-800mm, max. bale weight: approx. 120kg-180kg, machine dimensions X/Y/Z: approx. 1550mm/950mm/2000mm, weight: approx. 850kg. On-site inspection is possible. Kjlowufzpohccqrjlu

Condition: used, Functionality: fully functional, operation weight: 14,300 kg, Year of construction: 2016, operating hours: 4,800 h, RENTAL The machine offered is for rental only!!! Prices: Daily rate: €780.00 Klslhccowtq Ifjqrju Weekly rate: €2,800.00 Prices excl. VAT.

Year of construction: 2025, operating hours: 1 h, Condition: new, Cable stripping machine Suitable for cables from 2 to 120 mm 3 kW drive Weight: 200 kg Klelhccowtqiijqreu Dimensions in cm: 90 W × 60 D × 140 H

Year of construction: 1993, Condition: ready for operation (used), Press force: 340kN, drive power: 5.5kW, volume: 24m³, max. operating pressure: 200bar, insertion dimensions X/Y: 1470mm/1860mm, transport dimensions X/Y/Z: 7200mm/2500mm/2600mm, empty weight: approx. 5300kg, max. total weight: approx. 13500kg. On-site inspection is possible. Klolhcswtg H Docqrou

Year of construction: 2017, Condition: used, Type of fuel: Electric Kolhcswr Avxscqrolu Auction item. Secondary raw materials processing line in working condition. It was used to separate soil from garbage.

Condition: used, Functionality: unexamined, Year of construction: 2013, operating hours: 2,000 h, Neuson ECO 5003 compost turner, built in 2013, operating hours: approx. 2,000 hours John Deere engine with 328 hp, weight: approx. 8,200 kg, detachable turner head, well-maintained condition, ready for use Klsljwrw Ehohccqrou On request with suitable low loader for loading

Year of construction: 2023, Condition: new, Functionality: fully functional, Rotobec Orange Peel Grabs push the boundary of possibilities to a whole new level. Equipped with Rotobec’s own high-pressure cylinders, and one of the industry’s only self-contained hydraulic fluid channeling system, these beasts are quickly revolutionizing the world of scrap handling. Increase your up-time, reduce your maintenance costs and dominate your competition. Klolhccqewl Iz Hersu

Condition: reconditioned (used), Functionality: fully functional, Esel 20ft Container Tilter. - Hydraulic container door arms - 90° tilt angle - Digital scale system - Radio remote control - Diesel power pack - Front hydraulic locking system Kljlowl D Nmohccqrju

Condition: good (used), Year of construction: 2022, BEMA BMF 75 Compact HT baler Pressing force up to 3.5 tons Kjlewlnb Hjhccqrslu Year of manufacture: 2022 Good condition

Year of construction: 2004, operating hours: 460 h, Condition: used, Functionality: fully functional, Make: Idromec Type: PN 1800 Condition: in working condition Year of manufacture: 2004 PN series: several machines, solutions designed to customer`s specifications. Suitable for pressing light sheet metal waste. TECHNICAL DATA: Engine power: 53 kW Klslhowk U Dreccqrou Baling force: 100 tons Bale size: 350 x 350 mm Box length: 1800mm Production from-to: 0.5-1.5 Tons/h Weight: 11 tons Operating Hours: 460 h.

Condition: used, Year of construction: 2006, Functionality: fully functional, total length: 7,200 mm, total width: 2,500 mm, total height: 2,400 mm, overall weight: 23,000 kg, Mizar / Ecotechnica MB 50RR / Orca S 5250 G Kelhswkghceccqrelu

Year of construction: 2022, operating hours: 10 h, Condition: new, Functionality: fully functional, machine/vehicle number: 20QHM900, This fully automated bitumen membrane scrap recycling system is designed for closed-loop reuse, ensuring that the reclaimed material is reintegrated into the original production mix at the same percentage—maximizing efficiency and sustainability. - Continuous Recycling (500 kg/h) - The recycled product is treated as a standard component in the membrane formulation. - Ensures consistent performance by maintaining the original mix ratio. - Minimal Operator Intervention - Zero Waste – 100% reintegration into production. Kjlewffxcshccqrslu

Condition: good (used), Year of construction: 2012, Functionality: fully functional, Nestro separator/rotary valve, built in 2012, for the separation/differentiation of paper shavings or paper trimmings. Technical specifications: Manufacturer: Nestro Lufttechnik GmbH Year of manufacture: approx. 2012 Motor: 4 kW Kleljwffvhehccqrou Max. flow rate: 28,000 m³/h Max. inlet diameter: 450 mm Speed: 22 rpm Rotor width: 1,500 mm Rotor diameter: 1,200 mm Dimensions: 2,200 x 2,200 x 2,500 mm (LxWxH) Weight: approx. 3,000 kg Note: The machine is in good condition. It was inspected and tested by us in 28816 Stuhr, Germany. The video can be found at the top of our website or on our YouTube channel. Viewings, including live viewings, are possible at any time by appointment. We are happy to answer any questions you may have about the machine by phone Monday through Thursday from 8:00 a.m. to 2:00 p.m. On Fridays, we are available from 8:00 a.m. to 1:00 p.m. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or for any errors. Offers are subject to change without notice, subject to prior sale, and revocable at any time. Viewings are possible by appointment.

Year of construction: 2021, Condition: excellent (used), Functionality: fully functional, bale weight: 273 kg, machine/vehicle number: X0721-016, GPS GREAT SCRAP PROCESSING SOLUTIONS BALER Fully automatic two compression baler for production of high-density bales. This baler will produce a very high-density bale and is suited for both ferrous and non-ferrous scrap. Keljwc U Axshccqrslu 2021 G.P.S. Great Scrap Processing Solutions Model: 80 2C XL Automatic Baler, 400-480V, 3-PH, Total Install Power: 110 kW, Working Pressure: 280 Bar, First Compression Cylinder (Thrust): 140 t, Side Cylinder (Thrust): 140 t, Machine Noise Level:

Year of construction: 2011, operating hours: 800 h, Condition: good (used), Functionality: fully functional, machine/vehicle number: 739, Compost turner BACKHUS Width windrow up to: 5,0 m Height windrow up to: 2,4 m Windrow cross section: 6,2 m2 Turning capacity up to: 3.600 m3/h Engine: Cummins Power: 209 kW Condition: - Very good - Service, new filters and fluids - New hydraulic hoses - New chains with rubber pads (interchangeable system) - Colour refurbishment Kljljwclguohccqrou

Year of construction: 2008, operating hours: 6,400 h, Condition: good (used), Functionality: fully functional, machine/vehicle number: 573, Compost turner BACKHUS Width windrow up to: 5,0 m Height windrow up to: 2,4 m Windrow cross section: 6,2 m2 Turning capacity up to: 3.600 m3/h Engine: Cummins Power: 209 kW Condition: - Good - Service, new filters and fluids Kslhccowcldtoqrslu - Check diesel engine - Replacement of all faulty hydraulic hoses - New rear tailgate - Restoration of all technical functions - New rotor tools - Renewal of colour

Year of construction: 2002, operating hours: 3,500 h, Condition: refurbished (used), Functionality: fully functional, machine/vehicle number: 308, Compost turner BACKHUS Kjlhccswclbfjqrolu Width windrow up to: 5,0 m Height windrow up to: 2,4 m Windrow cross section: 6,24 m2 Turning capacity up to: 3.000 m3/h Engine: Cummins Power: 209 kW Condition: - Machine refurbished in 2024 - Very good - Complete technical inspection - New service - New hydraulic hoses - Colour refurbishment - New meetra rotor - RASO - Rotor Air System Orkan - Rotor tools double useable

Condition: good (used), Functionality: fully functional, Battery box lift tilter Equipped with its own generator Mounted on platform (h=1,200mm) Can be used together with press container (surcharge €7,500) see Advertisement ID A18943926 Immediately deployable Kslhccjwcd Rfoqrelu

Year of construction: 2000, Condition: ready for operation (used), A large Untha recyclable material shredder for plastics is ve power: 110kW, cutting unit opening X/Y: 1840mm/2000mm, cutting system: ÜSS S36, shafts: 1, machine dimensions X/Y/Z: 3750mm/2950mm/2650mm, weight: approx. luding hopper, base frame, press-in device and various perforated screen umentation available. Kljlhcowaa Ibecqrsu

Year of construction: 2017, Condition: ready for operation (used), A Untha recyclable material shredder for plastics overhauled in 2020 is available. Drive power: 55kW, cutting unit opening: 1400mm/1800mm, rotor length: 1400mm, rotor diameter: 450mm, rotor speed: 92rpm, knife rows: 3, cutting tools: 112, cutting system: S34/S/KO, screen hole diameter: 12mm, motor efficiency class: hine dimensions X/Y/Z: approx. 2200mm/2300mm/2500mm, weight: approx. 5600kg. Including built-in base frame and beam pressure system. Kljlhccqswaa Ihorju

Condition: ready for operation (used), Year of construction: 2015, operating hours: 41 h, machine/vehicle number: 460001238, Almost new (working time only 41 hours) combined crusher-press for PET bottles and cardboard. Effective system for recycling PET bottles in one рабочем цикле, мужчины обмы скалируемых ПЕТ-бутылок до 90%, turning them into compact bales up to 100kg. Klslev T U E Aohccqreu

Year of construction: 1996, Condition: ready for operation (used), A Tiek channel baling press including conveyor belt and tipping device is available. Pressing force: 50t, bale width: 800mm, bale height: 1100mm, bale length: unlimited, motor power: 22kW. Documentation available. On-site inspection is possible. Kljlhccov Tnygeqrsu

Year of construction: 2003, Condition: ready for operation (used), Cutting width: 1000mm, rotor diameter: 600mm, rotor blades: 6, stator blades: 2, screen diameter: 25mm, power: 75kW, weight: approx. 4600kg. On-site inspection is possible. Kolhccev Tnyajqrelu

Year of construction: 2005, Condition: ready for operation (used), A shredding machine including a DS 250 vibrating conveyor chute, which can be used in the wood industry as well as in the textile industry, is available. Power: 11kW, operating pressure: 280bar, weight: approx. 1100kg, chute length: 4000mm, chute width: 250mm. Documentation available. On-site inspection is possible. Kslhsv Tnx Noccqrolu

Year of construction: 1990, Condition: ready for operation (used), Two AUTEFA baling presses including automatic bale strapping are available. Press force: 70t, pre-press force: 25t, press dimensions X/Y: 1100mm/600mm, drive: hydraulic, power consumption: 22kW, press capacity: 4 bales/h, bale weight range: 400kg-800kg, material feed diameter: 250mm, machine dimensions X/Y/Z: approx. 4000mm/2000mm/3000mm, weight: approx. 7000kg. Documentation available. On-site inspection is possible. Klolhccqov Tnx Aorsu