Bode Packaging B.V.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, operating hours: 30,600 h, input voltage: 400 V, input current: 25 A, input frequency: 50 Hz, workpiece length (max.): 2,900 mm, workpiece width (max.): 1,200 mm, workpiece height (max.): 110 mm, number of slots in tool magazine: 8, total height: 2,500 mm, total length: 5,500 mm, total width: 2,500 mm, overall weight: 2,900 kg, table length: 2,700 mm, table width: 1,200 mm, year of last overhaul: 2024, Equipment: CE marking, documentation/manual, This 3-axis SCM TECH Z25 PLUS H-R4 was manufactured in 2005. It has a working area of 2700 x 1200 mm and a travel range of 2980 mm on the X-axis, 1280 mm on the Y-axis, and 200 mm on the Z-axis. The machine is equipped with 16 spindles operating at 4000 rpm and an electric spindle with a maximum speed of 18,000 rpm. If you are looking for high-quality CNC processing capabilities, Programmable speeds: X 25 m/min / Y 30 m/min / Z 22.5 m/min Vector speed: 40 m/min Drilling unit: 16 spindles, 4000 rpm, 2.2 kW (10 vertical + 6 horizontal) Bljdo Ahukiopfx Afmjp Main spindle: HSK-63 Tool magazine: FAST CHANGE 4 POSITION Tool magazine: BACK CHANGE 4 POSITION Machine Height: 2680 mm Machine Length: 5570 mm Machine Weight: 2900 kg Machine Width: 2500 mm Number of Axes: 3 Spindle Power: 6.6 kW Spindle Speed: 18000 RPM X-axis Travel: 2980 mm Y-axis Travel: 1280 mm Z-axis Travel: 200 mm

Condition: used, Year of construction: 1999, CNC machining center Manufacturer: Homag Type: BAZ 31/60/K Optimat Year of manufacture: 1999 Technical data - Workpiece length max. 6600 mm with single workpiece placement max. 2700 mm with alternating workpiece placement - Workpiece width max. 1200 mm - Workpiece thickness with edge max. 60 mm without edge max. 60 mm with standard clamp without edge max. 120 mm with clamping template when chamfer milling min. 12 mm when radius milling min. 2x radius + 10 mm - Working height, lower edge of workpiece 950 mm - 2 vacuum pumps, each with 66/100 m3/h for clamping system Main spindle 12 kW, water-cooled - for HSK F63 - Three-phase asynchronous motor 12 kW at S1, 600 Hz - Speed range: 1500 - 18000 rpm - Tool weight max. 6 kg incl. tool holder Tool changer, 12 positions - for tools and aggregates with HSK F63 - 12 x diameter max. 130 mm or - 6 x diameter max. 180 mm and 6 x diameter max. 70 mm - Tool diameter for grinding tools max. 200 mm Aggregate interface BAZ for main spindle For accommodating the machining and gluing aggregates with integrated pneumatic-electrical-electronic supply and pivoting drive, C-axis. Swiveling range without limitation. Hose-free compressed air supply. Drilling head with 17 spindles - 1 motor 1.9 kW, frequency-controlled - Speed selectable via program 4500/6500 or 8000 rpm - Each spindle can be activated individually - Arrangement of spindles in T-shape. - 11 spindles in X-direction, 7 spindles in Y-direction Homatic control system CNC programming system WOODWOP Postprocessor Bedpfx As Ahmz Defmjlp Programming based on CNC drawing Laser positioning aid for vacuum clamping system Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: excellent (used), IMA BIMA QUADROFORM C80/280.01 – Industrial CNC Machining Center For sale: an industrial CNC machining center manufactured by the German company IMA Maschinenfabrik Klessmann GmbH, model BIMA QUADROFORM C80/280.01. Identification data: Manufacturer: IMA Maschinenfabrik Klessmann GmbH Model: BIMA QUADROFORM C80/280.01 Year of manufacture: 1996 Serial number: 20550 Type: industrial CNC machining center Purpose and capabilities: The center is designed for the industrial machining of furniture components and wood-based materials. Typical operations performed on this type of machine: milling, drilling, grooving, contour machining, sizing of components. Equipment visible in the photos: structure and working unit of the CNC center, worktable with material clamping elements, machining units and working heads, control cabinet, operator panel. Bledpfx Afe Ahlzajmsp Technical condition: The machine is in good working order. The equipment can be inspected on site. The sale includes the machine with the equipment visible in the photos.

Condition: used, Weeke Venture 06M machining center X-axis: 3130mm Y-axis: 1250mm Z-axis: 85mm 18 drilling heads (12 vertical and 6 horizontal) HSK milling spindle, 9kW 8-position tool magazine Bledps Ahiuhefx Afmsp Grooving saw Machine available immediately. Loading included in the price.

Condition: new, Year of construction: 2026, Specifications Working area: X 2100mm Y 3100 mm, X 2100mm Y 4100 mm Z-axis range: 300 mm Table type: slatted, vacuum Vacuum sections: 6 manually controlled sections Drives: 1.5 kW Servo AC Ethercat Travel speed: up to 40 m/min Control system: Industrial controller, Ethercat communication with remote access Electro-spindle set: 9 kW Tool clamping: ISO30 collet Tool magazine: 12 positions Tool length sensor: YES Positioning bases: 5 pcs Dust extraction foot: with outlet for connecting a dust extraction system/vacuum cleaner Manipulator: manual, wired Cooling mist: YES Central oil lubrication: YES CAD/CAM software: YES Access enclosure: including a laser safety curtain Additional options: Vacuum pump or side-channel blower Different electro-spindle powers Different working table size Push-and-dust extraction bar Bsdpfxs Ahibls Afmslp Revolver magazine Oscillating knife head 4th axis, angular heads Drilling units

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, 5-axis machine with a table length of 4,469 mm in the X-axis and 1,560 mm in the Y-axis, including 2 tool changers. Working dimensions: X-axis: 4,469 mm Blsdpj Agu Akofx Afmop Y-axis: 1,560 mm Z-axis clearance: 180 mm Work table: 8 workpiece supports 8 rear workpiece stops, programmable, installed in each support 8 middle workpiece stops, programmable, installed in each support, positioned approximately 520 mm from the rear 1 + 1 lateral workpiece stops Lifting rails, pneumatic, programmable, for positioning heavy workpieces Vacuum pump 250 cbm/h Equipment for machining head: Drilling head with: 18 vertical drilling spindles, each individually controllable 2+2 horizontal drilling spindles in the X-direction 2+2 horizontal drilling spindles in the Y-direction Fixed nut saw in the X-direction 5-axis milling spindle 11 kW, HSK 63 F Rotational speed 1,000 - 24,000 rpm Bidirectional rotation Saw blade diameter, max. 300 mm Tool magazine, 12 positions, mounted on the machining support, moving in the X-direction Tool magazines, 10 positions, mounted laterally on the machine table on the left side Safety devices: * Support equipped with a bumper system * Protective fence on the side, rear, and left with an access door Control system: XILOG MAESTRO Without tools and aggregates Additional equipment: * Handheld terminal for controlling basic functions, such as manual movement, feed rate, and milling spindle speed

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, working width: 1,050 mm, working height: 100 mm, working length: 3,250 mm, TECHNICAL DETAILS Working length: 3,250 mm Working width: 1,050 mm Working height: 100 mm Drilling unit Vertical drilling spindles: 18 Horizontal drilling spindles, X-axis: 4 Horizontal drilling spindles, Y-axis: 2 Tool stations: 4 Position: rear MACHINE DETAILS Milling spindle power: 7.5 kW Operating voltage: 400 V Mains frequency: 50 Hz EQUIPMENT Grooving circular saw for X and Y direction, 90° Rear tool changer Bjdpfj Aggu Ajx Afmolp CE marking

Condition: good (used), Year of construction: 2024, functionality: fully functional, Biesse ROVER C 1982 CNC Machining center (5-axis) Description; Working fields X = 8125 mm; Y =1950 mm Z= 470/500 mm UPS Closed chain cable holder X-axis 12 ATS Panel supports 48 sliding bases Pneumatic locking system in 2 work areas in X 8 aluminium lifting bar supports for loading ease of large and heavy pieces. 290 m3/h rotary claws vacuum pump Vacuum module - Size 132x146 - H74mm Vacuum module - Size 132x75 - H74mm Vacuum module - Size 132x54 - H74mm Belt conveyor for the removal of chips and off-cuts 21.6 kW (29.4 HP) operating unit with 5 interpolating axes Blodps Af Ii Nsfx Afmsp HSK F63 adaptor and liquid cooling Suction hood with continuous positioning in Z controlled by NC Air-Jet cooling system Liquid chilling unit for liquid cooled systems Chain tool changer with 22 places at 180 mm centerdistance Strengthened gripper PC bTouch Presetter for the measurement of the tool length with diameter up to 130 mm bSolid 3D CAD-CAM program Additional license for bSolid Additional filter for vacuum pump SOPHIA - IoT Connection Roller lifting support in replacement of the standard one Enlargement of mesh guards and movement of the doors from front side to rear side to load profiles with length up to 11 meters (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2002, functionality: fully functional, 4-axis machine with WOODWOP 4.5, from a carpentry workshop Working dimensions: X-axis 3,200 mm Y-axis 1,250 mm Work table: 6 pcs workpiece supports, each with 3 vacuum cups 4 pcs lifting rails for heavy workpieces 1 rear and 1 front stop row Vacuum pump 100 m³/h Tool arrangement: Bedpfxs Afh Izj Afmjlp Main spindle 7.5 kW HSK 63 F with water cooling Speed 1,500 - 18,000 rpm with C-axis / positioning axis for adapter tools Drilling unit with 18 vertical spindles 6 drilling spindles horizontally Dado saw unit fixed in the X-direction Tool changer magazine, 8 positions, mounted at the rear of the support, moving in the X-direction, for milling tools and units Control: HOMATIC 2000 with WOOD WOP 4.5 Safety equipment: ----- * Foot mat protection in front of the machine Without tools

Condition: good (used), Year of construction: 2013, machine/vehicle number: 0-201-24-0260, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance Z-axis: 600 mm, workpiece length (max.): 3,470 mm, workpiece width (max.): 1,550 mm, number of slots in tool magazine: 18, controller manufacturer: HOMATIC, controller model: PC85, spindle motor power: 15,000 W, Equipment: CE marking, documentation/manual, Machine with shuttle console tables Workpiece length X max. (all units) - max. 3470 mm with single workpiece placement - max. 1700 mm with alternating workpiece placement Workpiece length max. (milling cutter D=25 mm) - max. 3470 mm with single workpiece placement - max. 1700 mm with alternating workpiece placement Workpiece width Y max. (all units) - max. 1300 mm Workpiece width Y max. (milling cutter D=25 mm) - max. 1550 mm 2 individually movable console clamping tables - 4-position workpiece placement possible - 8 movable consoles (4 per table) each with 1 front stop - Console length 1490 mm - 4 lifting rails - Side stops 4 x left, 4 x right (mirror image) - 1 vacuum circuit per table - 2 vacuum pumps, 140 m3/h each - Chip conveyor belt Bljds Afabaepfx Afmsp Equipment / Units: - Milling spindle 15 kW, liquid cooling - Tool changer, 18-position carousel - C-axis with electrical interface - C-axis extension for FLEX-5 unit - Drilling unit 2.7 kW, 20 spindles vertical / 10 spindles horizontal - Swiveling sawing/drilling unit - Sawing unit D=1200 - FLEX5 sawing, milling, drilling unit for multi-tool - 16 pcs. suction cups 160x115 mm - 8 pcs. suction cups 125x75 mm Control / Software: - PC85 control system - WoodWop 5.1 - Wood Design Package - CAD plugin - DXF import - Schuler MDE Available from week 46/2026.

Condition: used, Year of construction: 2019, functionality: fully functional, This Biesse machine must be sold by the end of the year – a great opportunity to invest in 5-axis technology at an extremely attractive price! Many accessories are already included: tools, frame clamps, vacuum suction cups, and other equipment. Bledpfxe Afaapj Afmsp Come and inspect the machine and request your personal quote; you can find more information on our website gsbern.swiss. Best regards, Renato and Joël GSBern – Consultants for Woodworkers

Condition: used, Year of construction: 2007, HOMAG OPTIMAT BAZ 211 Venture 21M, year of manufacture 2007. CNC machining center with C-axis, Flex5, and cantilever table. Equipment: - Workpiece length 3,050 mm with all units; up to 3,225 mm when milling with a Ø25 mm tool - Workpiece width front 1,150 mm / rear 1,400 mm with all units - Z-axis travel 600 mm - Main spindle 18.5 kW S6 / 14.5 kW S1, HSK-F63, up to 24,000 rpm Blsdpj Ad Uyujfx Afmjp - 6 manually adjustable cantilevers with LED positioning aid - MPU drilling head: 20 vertical and 10 horizontal drilling spindles, as well as a pivoting saw blade S360° - Flex5 sawing/milling/drilling unit for positioned angled machining - Tool changer 10 + 18 positions, a total of 28 - Retrofitted Busch-Mink vacuum pump and HYDAC coolant unit - powerControl PC85 with woodWOP Working areas depend on the tool, unit, and clamping device used. Pendulum machining is possible depending on the configuration. Machine location: Switzerland. Inspection and sales process by appointment only via DS-Maschinen in Stuttgart. Price on request. Detailed scope of delivery, availability, inspection, loading, and transport will be agreed upon. DS-Maschinen – Owner David Schulz

Condition: used, Year of construction: 2016, CNC machining center Manufacturer: Biesse Type: Rover A1432 Year of manufacture: 2016 Technical data 3-axis machine HSD drilling head - Maximum motor speed: 6,000 rpm - Vertical spindle travel: 60 mm - Horizontal spindle travel: 75 mm - Spindle bore: 10 mm - Saw blade diameter: 80-120 mm Blodo Ad Iw Tepfx Afmep Drive power: 17.3 kW Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is non-binding.

Condition: used, Year of construction: 2016, CNC machining center Manufacturer: Biesse Type: Rover A 1643 Bljdpfxs Ad Iw He Afmjp Year of manufacture: 2016 Technical data - 5-axis machine - Working area X/Y: approx. 4320 - 1620 mm Main spindle - Rated current: 14 kW - Power, short-term: 16 kW (S2 1 min.) - Maximum speed: 20,000 rpm - Tool clamping system: HSK-F63 - Cooling: as liquid - Operating mode: S1 continuous operation Drilling unit - Maximum motor speed: 6000 rpm - Vertical spindle stroke: 60 mm - Horizontal spindle stroke: 75 mm - Spindle bore: 10 mm - Saw blade diameter: 80 - 120 mm Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2005, CNC Machining Center Manufacturer: IMA Type: BIMA 300 Year of manufacture: 2005 Technical data Work area - Machining area X-axis: 4,300 mm - Machining area Y-axis with main spindle and 20 mm tool: 1,400 mm - Machining area Y-axis with drilling unit (all vertical drilling spindles): 1,100 mm - Max. clamping height above the vacuum suction surface: 125 mm - Max. workpiece thickness: depends on equipment and application - Working height: approx. 950 mm - Two-zone work area without pendulum machining: 2 x 2,050 mm - Average clearance without pendulum machining: 200 mm - Two-zone work area with pendulum machining: 2 x 1,750 mm - Average clearance with pendulum machining: 800 mm Main spindle - Spindle power: 7.5 kW - Tool holder: HSK-F63 - Taper diameter: 38 mm - Automatic tool clamping - Clamping force: 11,000 N - Release force: 20,400 N - Max. tool weight: 6 kg - Spindle speed: continuously variable, 1,500 - 18,000 rpm - Direction of rotation: programmable, clockwise and counterclockwise - Drive: Three-phase motor with frequency converter - Spindle lubrication: permanently lubricated at the factory - Spindle cooling: air-cooled - Integrated CNC rotary axis for tool positioning over 360°, with torque support and pneumatic connection Axis speeds - Max. rapid traverse X-/Y-axes: 60 m/min - Max. rapid traverse Z-axis: 30 m/min Vacuum, extraction, and compressed air - Required compressed air pressure: 7 bar - Extraction port diameter: 250 mm - Required extraction air velocity: 28 m/s - Required extraction volume flow: 4,950 m³/h - Vacuum pump capacity: 90 m³/h Dimensions and weight - Machine length: approx. 5,750 mm - Machine width: approx. 3,830 mm - Machine weight: approx. 6,000 kg Accessories - 90-degree angle drilling unit - 3 x HSK tool holders Bledpfx Ao Adyhwefmep Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Working area X: 4300 mm Working area Y: 2205 mm Z-axis workpiece passage: 250 mm 1 x 19.2 kW 4-axis electrospindle, HSK F63 connection 1 x 19.2 kW 3-axis electrospindle, HSK F63 connection 8-position turret-type tool changer “FT” work table with grid Software: Biesse bSolid 3 vacuum pumps Cooling system Bsdpfx Afo Abawgemolp Special extraction hood with 2 extraction connections Safety guards

Condition: used, Year of construction: 2013, functionality: fully functional, CNC machining center Biesse Rover A 4.30 with accessories and tooling, see photos. Year of manufacture 2013, fully equipped and in perfect working order. Equipped with a lock box unit, sawing unit, and tool changer with 24 positions. Bljdj Aaz Svepfx Afmsp Includes Palettcad software. Location: Freising Inspection is welcome. We have other used machines available. Please contact us.

Condition: used, Year of construction: 2019, functionality: fully functional, Used Biesse WINLINE 16 2Y – CNC machining center with 2 Y-axes The Biesse WINLINE 16 2Y is a CNC machining center with automatic workpiece handling, powerful electrospindles, and flexible machining options. The machine is suitable for efficient and precise machining of wood and panel materials. Specifications 30 kW electrospindle - HSK F63 tool holder - 25 kW continuous power (S1) - Programmable speed: 1,000–18,000 rpm - 360° interpolating C-axis with Direct Drive - High precision and flexible machining 5-axis electrospindle - 16.5 kW peak / 14 kW continuous power (S1) - HSK F63 tool holder - Water-cooled spindle - C-axis with 360° continuous rotation - B-axis with undercut capability up to -10° - Max. 18,000 rpm Tool changer - 44-position tool changer - Max. tool/aggregate weight: 10 kg - Max. total tool weight: 140 kg ### Automatic workpiece handling - NC-controlled loading and unloading - 3 workpiece clamps - 6 EPS supports with clamps along the Y-axis - Option for an additional 2 supports Bsdpfxe Aazt Tj Afmolp - Max. workpiece size with automatic handling: 3,200 × 200 × 140 mm - Min. workpiece size with automatic loading: 300 × 40 × 40 mm ### Control and other equipment - bSolid CAD/CAM software with 3D simulation and collision detection - BH660 PC-based control - CE safety enclosure - Chip conveyor and automatic lubrication - UPS and wireless bPad - Conveyor belt for loading and unloading workpieces up to 3,200 mm - Labeling equipment, chip deflector, and 350 mm saw blade and horizontal milling head Contact us for more information about the machine's condition, price, and delivery.

Condition: ready for operation (used), functionality: fully functional, Operation in X, Y, Z axes Bljdpfs Aay Ivox Afmep Horizontal drills on X-axis – 10 pcs Horizontal drills on Y-axis – 2 pcs Vertical drills on Y-axis – 14 pcs Vacuum pump 3 kW Capability for dual-field operation 6 beams Milling unit 2 work zones 3000 kg Year of manufacture: 1992

Condition: good (used), Year of construction: 1999, machine/vehicle number: 0-250-04-1744, functionality: fully functional, input voltage: 400 V, number of axes: 4, number of slots in tool magazine: 8, total length: 7,500 mm, total width: 4,600 mm, overall weight: 6,000 kg, Equipment: CE marking, documentation/manual, For sale: Weeke Optimat BP 150, the largest model, a 4-axis, liquid-cooled machining center with 12 beams and two vacuum pumps, one of which has undergone a major overhaul. The machine is in continuous operation. The gross price includes 23% VAT. This is a reliable and durable machine; parts are readily available through the Hommag network and on the open market at very reasonable prices. I recently replaced the vertical drive shaft and other minor parts. It is a solid, heavy-duty, and rigid machine. The headstock covers are removed but are included as a complete set. The machine is still in continuous operation, working at 25% capacity. Bledpfjz Tfiasx Afmjp It has 12 vertical drilling units in the X-axis, 24 vertical drilling units in the Y-axis, and 12 horizontal drilling units. It also includes a grooving saw and a milling cutter. Two safety mats require repair or replacement. The price is 5,000 Euros, and loading onto a truck costs 890 Euros. I am selling it because I am closing my business due to my age.

Condition: good (used), Year of construction: 2012, machine/vehicle number: 0-201-08-1944, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance Z-axis: 600 mm, workpiece length (max.): 3,470 mm, workpiece width (max.): 1,550 mm, number of slots in tool magazine: 18, controller manufacturer: HOMATIC, controller model: PC85, spindle motor power: 15,000 W, Equipment: CE marking, documentation/manual, Machine with shuttle console tables Automatic loading/unloading TBP 420/125/G is included. Bodpjz Szdqofx Afmelp Workpiece length X max. (all units) - max. 3470 mm with single workpiece placement - max. 1700 mm with alternating workpiece placement Workpiece length max. (milling cutter D=25mm) - max. 3470 mm with single workpiece placement - max. 1700 mm with alternating workpiece placement Workpiece width Y max. (all units) - max. 1300 mm Workpiece width Y max. (milling cutter D=25 mm) - max. 1550 mm 2 individually movable console clamping tables - 4-position placement possible - 8 movable consoles (4 per table) with 1 stop each at the front - Console length 1490 mm - 4 lifting rails - Side stops, 4 x left, 4 x right (mirrored) - 1 vacuum circuit per table - 2 vacuum pumps, 140 m3/h each - Chip conveyor belt Equipment / Units: - Milling spindle 15 kW, liquid cooling - Tool changer, 18-position rotary - C-axis with electrical interface - C-axis extension for FLEX-5 unit - Drilling unit 2.7 kW, 20 spindles vertical / 10 spindles horizontal - Pivoting saw/drilling unit - Saw unit D=1200 - FLEX5 saw, milling, drilling unit for multi-tool - 16 pcs. Suction cups 160x115 mm - 8 pcs. Suction cups 125x75 mm Control / Software: - PC85 operating system - WoodWop 5.1 - Wood Design Package - CAD Plugin - DXF import - Schuler MDE Available from week 49/2026.

Condition: used, Year of construction: 2023, functionality: fully functional, operating hours: 1,031 h, workpiece length (max.): 2,500 mm, workpiece width (max.): 3,100 mm, workpiece height (max.): 700 mm, number of slots in tool magazine: 18, Equipment: documentation/manual, 5-AXIS MILLING PLOTTER 2531 Specifications: 2500 X 3100MM, Z-AXIS RANGE 700MM HITECO 13.5KW S6 TILTING/ROTARY HEAD SET A-AXIS RANGE: +/–120°, C-AXIS RANGE: +/–320°, ROTARY TILT T-JQX 29L0549395D ELETM QX-2 11/12 24 63F NC HSK63 FOR 5-AXIS MACHINES AIR CONDITIONING FOR THE CONTROL CABINET ACTIVE COOLING SYSTEM – CHILLER CW-6000 (FOR SPINDLES UP TO 20KW) LINEAR TOOL MAGAZINE, 18 POSITIONS, FOR 5-AXIS MACHINES ROTARY TOOL MAGAZINE, 16 POSITIONS, HSK63F AUTOMATIC CENTRAL LUBRICATION SYSTEM WITH SKF GREASE SAFETY ENCLOSURE WITH ELECTRONIC SAFETY SYSTEM (FOR 5-AXIS MACHINES OR MACHINES WITH A TILTING ELECTRO-SPINDLE) WALTER SKTG 5.5 P COMBO SCREW COMPRESSOR WITH DEW POINT DRYER REMOTE SERVICE ACCESS (REMOTE DIAGNOSTICS) CONTROL SYSTEM FOR TWO PUMPS UP TO 11KW TOTAL (PROTECTIONS + SOFT START + PRESSURE RELIEF VALVE) BUSCH MV 0312B-5.5KW VACUUM PUMP, CAPACITY 290M3/H, MAX. ULTIMATE PRESSURE 150MBAR (ABS) 2131 EXPERT MILLING PLOTTER, WORKING AREA 2100X3100MM Specifications: WORKING AREA 2100X3100MM - Z-AXIS TRAVEL RANGE 300MM, EXPERT, PRO - OMRON SERVO AC HIGH-SPEED DRIVES (COMPLETE WITH PLANETARY GEARBOXES) 1.5KW ETHERCAT - 2131 RASTER VACUUM TABLE - POROUS SUPPORT PLATE (1200 X 2500 X 12 MM) - PNEUMATICALLY CONTROLLED VACUUM SECTION, 6 PCS - CONTROL SYSTEM FOR TWO PUMPS UP TO 11KW TOTAL (PROTECTIONS + SOFT START + PRESSURE RELIEF VALVE) - BUSCH MV 0312B -5.5KW VACUUM PUMP, CAPACITY 290M3/H, MAX. ULTIMATE PRESSURE 150MBAR (ABS) - INDUSTRIAL REAL-TIME CONTROL SYSTEM (MS) OSAI OPENSMART, CYCLE TIME BELOW 2MS, UP TO 16 AXES SUPPORT, ETHERCAT COMMUNICATION WITH A SMALL CONTROL CABINET - HITECO 7.5KW S6-ATC ELECTRO-SPINDLE SET, UP TO 24,000 RPM, FAN-COOLED, TOOL MOUNTING - LINEAR TOOL MAGAZINE, 6 POSITIONS - ACTIVE OSCILLATING KNIFE – PNEUMATIC - OPTION FOR OSCILLATING KNIFE: CREASING HEAD - OPTION FOR OSCILLATING KNIFE: DISC KNIFE (INSTEAD OF THE WRITING HEAD) - PNEUMATICALLY MOVED EXTRACTION FOOT (WITH OUTLET FOR CONNECTING AN EXTRACTION SYSTEM/VACUUM CLEANER) - PREMIUM COOLING MIST, 1 PCS - BASE POSITIONING CONTROL - POSITIONING BASE 25MM, 1 PCS (MINIMUM 3 PCS) - OSAI LASER FOR POSITIONING - AUTOMATIC CENTRAL LUBRICATION SYSTEM WITH SKF GREASE Blodjz Suyrepfx Afmsp - CAD/CAM VECTRIC CUT 2D PRO - SAFETY ENCLOSURE WITH ELECTRONIC SAFETY SYSTEM - HSK-F63 STARTER KIT (5 HSK-F63 TAPER HOLDERS + 18 ER32 COLLETS IN THE RANGE OF 3-20MM) ELECTRIC CHAMBER OVEN FOR HEAT TREATMENT, SwissTherm PKK-7500 Specifications: Chamber Dimensions: 2500x1000x3300 Maximum Temperature: 180 Voltage: 3/N/PE AC 400/230 V, 60 kW, 100A Peel3 Scanner Software: DPS Software, SolidCam 3D, Solidworks Professional, DraftSight Enterprise Schmalz Conveyor Jumbo Ergo 65kg vacuum manipulator system with a lightweight aluminum boom for ergonomic operation HP A3500 ZBOOK FURY 16 G10 Mobile Workstation, 1TB, 132GB, NVIDIA RTX

Condition: like new (used), Year of construction: 2022, machine/vehicle number: AA 10005475, functionality: fully functional, operating hours: 2,540 h, number of axes: 5, overall weight: 5,725 kg, Work table and workpiece clamping: 8 TV FLEX rails, length 1,600 mm 8 lifting devices for 1,600-mm rails 24 fixed vacuum supports, 145 × 145 mm, H = 75 mm 8 rotatable vacuum supports, 180 × 65 mm, H = 75 mm Front stops, H = 75 mm Additional front stops, H = 75 mm Double, removable central reference stop with 6 stops, H = 75 mm Working area X: 5510 mm Bedpoz R Rgmefx Afmjlp Working area Y: 1620 mm Workpiece passage Z: 250 mm Vector speed X-Y axes: 78 m/min (ProSpeed) Machining units: 5-axis machining unit DIRECT 5 JQX: 13.5 kW with liquid cooling 3-way positionable extraction hood Drilling unit F23 L RO AX: 13 independent vertical spindles 10 horizontal spindles (6 in X and 4 in Y direction) Integrated slot cutter in X direction Drilling unit OF0480: With pneumatic vertical positioning (single Z-axis) Drilling unit with additional frequency inverter Device for increasing the drilling pressure in the Z direction Preparation for Hiteco units with 1 pneumatic interface Tool length measuring system Linear tool changer magazine TRB14: Arranged on the side with 14 tool positions Suitable for milling cutters and, depending on the configuration, larger tools or angular heads Moving linear quick-change magazine FAST 14: With 14 tool positions, designed for short tool change times and high machining efficiency Vacuum pump: 250/300 m³/h; 50/60 Hz Control and software: SCM Maestro Connect Maestro Active, Human Machine Interface (HMI) Maestro CNC Hardware key for Maestro CNC Basic Additional key for Xilog Maestro (USB) Operating system: Windows 10 Embedded 64 Bit Control panel with integrated EYE-M PRO PC Chip disposal: Chip extraction mat 5510 mm; mobile chip container at the end of the machine bed Electrical connection: 400 V - 50 Hz

Condition: used, Year of construction: 2017, machine/vehicle number: 1000020374, functionality: fully functional, operating hours: 5,484 h, power: 12.8 kW (17.40 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: DC, travel distance X-axis: 3,280 mm, travel distance Y-axis: 1,660 mm, travel distance Z-axis: 240 mm, number of axes: 5, number of slots in tool magazine: 16, controller manufacturer: Biesse, actuation type: pneumatic, Equipment: CE marking, documentation/manual, We are selling a 5-axis machining center, Biesse Rover A 1632 Smart, manufactured in 2017. The machining center is in very good condition due to relatively infrequent use since its purchase. We are the first owner. I have attached the file "Cartellino_1000020374" to the listing below. This is a manufacturer's document describing the configuration of the offered machine according to Biesse standards. Bledpfxjz R I U Io Afmsp Technical specifications of the machining center: ‣ Working areas *: X = 3280 mm; Y = 1580 to 1660 mm, depending on operating conditions. Z = 200 mm (configuration with 5-axis unit, drilling head, and H=74 mm modules). Z ​​= 240 mm (configuration with 5-axis unit, drilling head, and H=29 mm modules). ‣ Configuration 2 ‣ 6 ATS tables – 18 carriages ‣ Rear row stops with 115 mm travel and 25 mm extension. ‣ Intermediate row stop located at coordinate 1190 mm with 140 mm travel. ‣ 4 side stops with 140 mm travel (2 right + 2 left) with pneumatic system. ‣ Sensor to verify stop retraction. ‣ 4 support bars for H=74 mm modules. ‣ Claw-type vacuum pump with 250 m³/h capacity. ‣ Vacuum module – Size 132x146 – H74 mm with high-friction surface and pre-installed vacuum seal. ‣ Vacuum module – Size 132x75 – H74 mm with high-friction surface, pre-installed vacuum seal, and pre-installation for locating pins. ‣ Vacuum module – Size 132x54 – H74 mm with high-friction surface, installed vacuum seal, and pre-installation for locating pins. ‣ Automatic lubrication system. ‣ Sawdust and chip removal conveyor. ‣ 5-axis interpolating machining unit, 13 kW (17.4 HP), HSK F63 tool holder, liquid-cooled. ‣ Coolant supply unit. ‣ Additional Z-carriage for machining units, controlled by an independent Z-axis. ‣ BH 17 L drilling head. ‣ 16-position rotary tool magazine on the X-carriage. ‣ 12-position linear tool magazine mounted on the machine frame. ‣ HSK F63 adapter with integrated flange for saw blades used in 5-axis units. ‣ 300 mm diameter saw blade for integrated-flange mounting. ‣ bSolid software. If the information above is insufficient, please contact me and let me know what you would like to know. Upon request, I can provide a document in English with a detailed description of our machining center's layout. Best regards, Ihor Balychev.

Condition: ready for operation (used), Year of construction: 1995, input voltage: 400 V, number of axes: 5, number of slots in tool magazine: 24, controller manufacturer: BWO, MAKA HC 57 R (Robot) CNC Machining Center 5-Axis Type HC-57 R / Machine No. 420 747 / Year of manufacture 1995 / Circuit diagram no. 320 177 The machine is operational and exceptionally robustly constructed (milling spindle, tool changer, vacuum pump, support, etc.) and equipped with existing electronics (control unit, circuit boards, transformer). It shows age-related wear in areas such as wiring, pneumatic lines, central lubrication lines, etc. It runs and is ready for operation, but due to the above-mentioned wear, it is being offered as a source of spare parts or for refurbishment. Collection from 41334 Nettetal, workshop edge. Price negotiable. If no buyer is found for the assembled, complete machine, the machining center will be dismantled. Bodpjz R Dqqefx Afmjlp The spare parts will then be offered individually. Interested parties in MAKA spare parts can contact us in advance regarding details or spare parts inquiries.