Sirven

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, turning diameter over bed: 540 mm turning length: 1.500 mm turning diameter in the recess: 580 Working travel of the lower slide max. approx.: 415 mm adjustment of upper support, max. approx.: 140 mm Gujdpfxey Snkhs Amueb turning speed range: 0 - 1.800 U/min diam. of main spinde: 135 mm spindle bore: 68 mm internal taper diameter: 73 mm bed width: 403 mm Equipped with: Three jaw chucks FORKARDT 250 Digital read out 3 axis fixed steady rest feed safety chip tray tool holders, 6 chisel holders, 1 holder for clamping sleeve

Condition: new, Year of construction: 2026, 0560 mm 390 mm 2000 mm 280 mm 80 mm 11,25 kW spindle turning speed - stepless 20-2000 U/min spindle taper K 8 DIN 55027 0 Gjdpfx Amsy Sbkzeueub

Condition: used, turning diameter 500 mm turning length 1.250 mm turning speed range - main spindle 11,2 - 2.240 min/-1 Godoy Rakwspfx Amujub In our estimation, the machine is in good used condition and can be inspected under power by appointment. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: not inspected (used), functionality: unexamined, We are offering this untested TOS Trenčín SUI 50 CNC centre lathe, year of manufacture unknown. Manufacturer: TOS Trenčín Model: SUI 50 CNC Condition: untested Category ID: 1519 Type ID: 2086 Machine type: Centre lathe (lead-screw/feed-screw lathe) The machine powers up and the display lights up without any error messages. The chuck can be engaged. Other than the emergency stop button on the machine (see photos), no defects are visible. Unfortunately, I have no experience with this machine and therefore cannot operate it. The machine was still in operation until early 2025. It comes from an insolvency auction and is now for sale. The tools currently installed in the machine will remain in it. A complete operating manual and circuit diagrams are available. The machine is still connected and can be inspected and tested on site. Transportation should ideally be arranged by the customer. Loading by overhead crane is possible. Securing the machine is the buyer’s responsibility. If you have any further questions or require more information, please feel free to send us a message or call us. Godpfx Aoy Nml Esmuoub

Condition: used, Year of construction: 1987, greates pass round over bed 560 mm swing diameter over face slide 365 mm turning speed range - main spindle 11,2 - 2.240 min/-1 drive capacity - main spindle 15 kW spindle head No. 8 spindle diameter in front bearing 100 mm spindle bore 62 mm machine weight ab. 2,5 t dimensions of the machine ca. L 3,5 x B 2,0 x H 2,2 m In our assessment, the machine is in good used condition and can be inspected under power by appointment. The machine has undergone a geometric overhaul. Gujdpfx Amjy Nfbljusb Technical features & accessories: - 3-axis digital readout, Fagor - Rapid traverse Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2021, turning diameter over bed 0800 mm turning diameter over slide rest 500 mm turning length 4000 mm spindle bore 105 mm spindle turning speed range 5,4 - 720 U/min workpiece weight 2500 kg Gjdoy Nd Siepfx Amusub bed width 600 mm spindle bore 105 mm longitudinal feeds: 0,05- 24,3 mm/U cross feed 0,05 - 12,15 mm/U rapid traverse 4 m/min main drive 11 kW total power requirement 14 kW weight of the machine ca. 8 t dimensions of the machine ca. 6,5 x 2,5 x 2 m With 4 position tool holder, face plate with safety cover, steady rest and DRO.

Condition: refurbished (used), functionality: fully functional, CAZENEUVE HB 725 x 2000 Lathe Distance between centers: 2000 mm Center height: 315 mm Max. turning diameter over bed: 725 mm Max. turning diameter over saddle: 670 mm Max. turning diameter over cross slide: 400 mm Spindle bore: 81 mm Tailstock taper: MT6 Max. cross slide travel: 400 mm Number of spindle speeds: 18 Gsdpfx Amjy Ncuveusub Power: 18 HP Spindle speed: 20 to 1,600 rpm Dimensions (L x W x H): 3,640 x 1,270 x 1,355 mm Weight: 3,100 kg

Condition: used, functionality: fully functional, Leadscrew and feed shaft lathe Manufacturer: Heidenreich & Harbeck, Type VDF V3 Technical Data Brand: Heidenreich & Harbeck Type: VDF V3 Year of manufacture: unknown Gujdpfx Aey Iyzqsmuob Control: conventional Centre distance: 1000 mm Swing diameter over bed: 520 mm Spindle bore: 63 mm Dimensions: L 3.40 x W 1.10 x H 1.40 m Machine weight: approx. 3.5 t Equipment - 4-jaw chuck Röhm, diameter 250 mm All information provided without guarantee. A power-on demonstration is possible at any time in our showroom.

Condition: ready for operation (used), functionality: fully functional, TECHNICAL DETAILS MACHINE DETAILS Electrical Data Voltage: 380 V Frequency: 50 Hz Phases: 3 & N Current consumption: 10 / 16 A Gusdpfjy Iwydjx Amujb Motor Power Main motor power: 12.5 HP Pump motor power: 0.05 HP Total power: 12.55 HP The seller cannot guarantee the following technical data and therefore recommends an on-site inspection! Swing over bed: 535 mm Swing over cross slide: 356–370 mm Swing in gap: 815 mm Spindle bore: 90 mm Spindle nose: D1-11 Camlock Tailstock taper: Morse taper MT5 Spindle speed range: 18–1400 rpm Number of spindle speeds: 16 Motor power: approx. 9.3 kW Power supply: 3-phase

Condition: used, Year of construction: 1959, total length: 3,500 mm, total width: 1,200 mm, total height: 1,500 mm, Colour: Green Empty weight: 2.000 kg - Year: 1959 - Documentation available: No - CE certificate present: No - Serial number: 37 - Drive system: Conventional - Centre height [mm]: 270 - Swing over bed [mm]: 540 Gedpsy Idtwefx Amujub - Carriage turning diameter [mm]: 360 - Distance between centres [mm]: 1500 - Bed width [mm]: 450 - Spindle bore [mm]: 62 - Min. spindle speed [rpm]: 14 - Max. spindle speed [rpm]: 710 - Options: Fixed steady, Three-jaw chuck - Transport dimensions: 3500mm x 1200mm x 1500mm (l x w x h) - Transport weight [kg]: 2000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), For sale is a Schaublin 125 precision lathe in exceptionally good condition with extensive accessories. The machine was never used in production and shows barely any noticeable wear. Radial and axial runout at the spindle nose is less than 0.001mm. In terms of condition, this machine is almost as new. Naturally, the machine is fully functional and has been thoroughly checked. The brake and the feed control board were recently replaced. This is a rare opportunity to acquire one of the most precise conventional lathes in outstanding condition. TECHNICAL DATA: - Centre height: 125 mm - Centre distance: 500 mm - Maximum workpiece diameter over bed: 270 mm Gsdpfxoy Hnuce Amusub - Maximum workpiece diameter over cross slide: 120 mm - Infinitely variable spindle speeds: 225–3000 rpm - Spindle nose: Camlock D1-3 - Spindle bore: 32 mm - Collets: Schaublin B32 - Collet pass-through: 24 mm - Chuck pass-through: 28 mm - Bed travel: 440 mm - Carriage travel: 90 mm - Cross slide travel: 130 mm - Tailstock quill taper: Morse 2 - Tailstock quill travel: 100 mm - Automatic feeds, longitudinal & cross: 4–260 mm/min, stepless Weight approx. 950 kg Accessories: - Röhm 160 mm 3-jaw chuck - Reishauer 160 mm 4-jaw independent chuck - 160 mm 4-jaw self-centering chuck - 6x Multifix tool holders - Change gears for thread cutting - B32 collet set from 1 to 24 mm with draw tube - Machine mounts - Complete documentation including original brochure

Condition: used, For sale is a used Weiler Matador lathe. Version VS2 with pre-select gearbox. Comes with change gears and collet set. Good, fully functional condition. Centre height: 140 mm Swing over bed: 295 mm Gujdpfx Asy Hi A Ismujb Distance between centres: 500 mm Spindle bore: 36 mm Spindle speeds: 15 - 3350 rpm Inspection under power possible in 5023 Salzburg. Forklift available for loading.

Condition: good (used), Year of construction: 1965, functionality: fully functional, Turning length/centre distance: 4m, spindle bore diameter, faceplate D 1000 mm, centre height over carriage 360 mm, 2 steady rests with roller jaw guides retrofitted in 1980, main spindle speed 215 - 355 rpm. Operating manual with wiring diagram, chip guard, quick-change toolholder, carriages recently overhauled, electric control box, weight approx. 15 t. Inspection possible under power, including test run. Gujdpjy Ehntefx Amuob

Condition: good (used), Year of construction: 2008, functionality: fully functional, Well-maintained lathe from the maintenance department. Equipment and accessories: * 3-axis D.R.O., HEIDENHAIN ND 7013 * 3-jaw chuck FORKARDT F+315 * 4-jaw chuck, diameter 400 mm * Feed in upper slide * Rapid traverse * Lamp * Coolant equipment * Boring bar holder Gsdpfx Amey Ed T Seueub * Center points * Multifix tool holder with tool holder * Steady rest * Machine documentation

Condition: ready for operation (used), Year of construction: 1971, functionality: fully functional, We are selling our VDF Boehringer M 670 machine Guodpfey Ecdpsx Amuob

Condition: refurbished (used), functionality: fully functional, CAZENEUVE Lathe HB 500 x 1500 Brand: CAZENEUVE Model: HB500 Distance between centers: 1,500 mm Gujdpoy D Hv Tofx Amueb Center height: 200 mm Max turning diameter over bed: 500 mm Max turning diameter over cross slide: 448 mm Max turning diameter over carriage: 220 mm Spindle bore: 40.5 mm Tailstock taper: MT5 Max cross slide travel: 280 mm Number of spindle speeds: 18 Power: 10 HP Spindle speed: from 40 to 3,200 rpm Dimensions (L x W x H): 2,905 x 1,175 x 1,295 mm Weight: 1,950 kg

Condition: reconditioned (used), functionality: fully functional, CAZENEUVE HB 725 x 5000 Lathe Distance between centers: 5000 mm Center height: 315 mm Maximum turning diameter over bed: 725 mm Maximum turning diameter over saddle: 670 mm Maximum turning diameter over cross-slide: 400 mm Spindle bore: 81 mm Tailstock taper: MT6 Gsdpfey Dpvcjx Amusub Max. cross slide travel: 400 mm Number of spindle speeds: 18 Power: 18 HP Dimensions (L x W x H): 6640 x 1270 x 1355 mm Weight: 4,500 kg Fixed steady rest

Condition: used, TECHNICAL DETAILS - Distance between centers : 1800 [mm] - Max. diameter on bench : 583 [mm] - Machining diameter between centers : 280 [mm] - X/Z stroke : 255 / 1710 [mm] - Quill diameter : 100 [mm] - Quill stroke : 295 [mm] MAIN SPINDLE - Spindle nose : A1-8" - Spindle passage : 80 [mm] - Spindle speeds : 0 - 2500 [rpm] - Spindle power : 18.4 [kW] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 3.600 x 1.700 [mm] - Machine height : 1.820 [mm] - Machine weight : 2.700 [kg] EQUIPMENT - CN Conversational CAZENEUVE NUM Power Godjy A Tknepfx Amueub - LCD control screen - Multifix Quick-Change Turret - Coolant tank - Chuck 3 jaws - Tool holder set

Condition: used, functionality: fully functional, spindle bore: 65 mm, turning diameter over bed slide: 520 mm, Lead and feed screw lathe Manufacturer: Heidenreich & Harbeck, Model: VDF Technical data Brand: Heidenreich & Harbeck Guodpfx Ajy A H Aksmuob Model: VDF Year of manufacture: unknown Control: conventional Centre distance: 1,500 mm Swing over bed: 520 mm Spindle bore: 65 mm Dimensions: L 3.60 x W 1.20 x H 1.50 m Machine weight: approx. 4 t Equipment - 2-axis digital readout - 1,500 mm scale not included All data without guarantee. A powered demonstration can be arranged at any time in our exhibition hall.

Condition: excellent (used), TOS SN500 SA, 1500 mm, Digital, Tooling Gusdpsy Auydofx Amueb

Condition: used, spindle bore: 51 mm, swing diameter over cross slide: 300 mm, rotational speed (max.): 2,500 rpm, three-jaw chuck diameter: 300 mm, Used lathe Brand: Amutio Cazeneuve Model: HB 575 Distance between centers: 1,000 mm Swing over bed: 575 mm Swing over carriage: 525 mm Swing over cross slide: 300 mm Spindle bore: 51 mm Speeds: 32–2500 rpm Power: 10 kW Guodoyzrhcspfx Amujb Bed width: 400 mm Includes: - 300 mm chuck with several sets of jaws - Closed steady rest - Quick-change tool post with 3 tool holders - Aurki digital readout (2 axes) - 2 live centers - Tray with coolant system

Condition: like new (used), Year of construction: 2017, functionality: fully functional, spindle bore: 105 mm, turning diameter: 500 mm, turning diameter over top slide: 300 mm, center height: 250 mm, turning length: 1,500 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 36 rpm, overall weight: 2,800 kg, Very neat and hardly used centre lathe including: digital readout, coolant system, fixed steady, travelling steady, quick-change tool post type Multifix C, 3-jaw chuck, independent 4-jaw chuck, faceplate, spindle sleeve and various centres. Gusdpfx Aoyzb Ixomujb

Condition: used, Year of construction: 1974, functionality: fully functional, Lead and feed screw lathe Make: Heidenreich & Harbeck Model M530K Year: 1974 Technical Data Gsdpfxeyyk Ras Amusub Manufacturer: Heidenreich & Harbeck Model: M530K Year of manufacture: 1974 Control: Conventional Centre distance: 2000 mm Swing over bed: 530 mm Swing over cross slide: 280 mm Spindle bore: 70 mm Spindle speed: 9 - 1800 rpm Dimensions (L x W x H): 4.05 x 1.50 x 1.40 m Machine weight: approx. 4 t Equipment - Röhm 3-jaw chuck, D 250 mm - 1 fixed steady rest - Removable gap bed over 400 mm length - 2-axis digital readout - 1 drill chuck - Coolant pump All data subject to change without notice. A powered demonstration is possible at any time in our showroom.

Condition: ready for operation (used), Year of construction: 1981, spindle bore: 51 mm, turning diameter: 575 mm, turning length: 1,500 mm, spindle speed (max.): 2,000 rpm, overall weight: 2,000 kg, 2-axis Newall DRO Capacity: 1500 x 575 mm Gusdsyxfk Sopfx Amujb Spindle bore: 51 mm Maximum spindle speed: 2000 rpm Weight: 2000 kg

Condition: good (used), Stock number: 2954 Gusdpfx Ajywf S Hjmueb Manufacturer: Knuth Year of manufacture: 1990 Type / Model: Torro 250/1500 Serial number: Control: conventional Center distance: 1,500 mm Spindle bore: 60 mm Center height: 250 mm Swing diameter over bed: 500 mm In gap: 700 mm Over cross slide: 300 mm Speed range: 11.5 to 1,600 rpm Drive power: 7.5 kW Accessories/Equipment: thread cutting device Condition: good Weight: approx. 2.5 t Dimensions: 3,200 x 1,100 x 1,350 mm