Bravarija Ivanic D.o.o.

Condition: good (used), Year of construction: 2002, Used 2-meter CNC press brake Hedpjz Hwi Rjfx Aa Ieu Type: V85 Capacity: 2050 x 85 tons Delem CNC control Year of manufacture: 2002 Stroke length: 365 mm Y1, Y2, X1, X2, R1, R2, Z1 and Z2 CNC controlled Automatic Wila NS clamping system Adjustable table CNC crowning

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, Resonator: 3kW Hodpfxoz Hl Tke Aa Iju Operating hours: approx. 29,400 hours Availability: Upon request Annual maintenance performed by Trumpf.

Condition: excellent (used), Year of construction: 2006, Pressing force: max. 850 kN Stroke: max. 215 mm Hsdpfoz Hl Nfsx Aa Iou Operating pressure: max. 300 bar Response time: max. 95 ms Follow-up travel at 220 mm/s: max. 10 mm Follow-up travel at 160 mm/s: max. 8.5 mm Safety distance: min. 190 mm Weight of the press: 7,300 kg Voltage: 3 x 400 V Rated current: 24.0 A Frequency: 50 Hz Connected power: 17.0 kVA Control voltage: 24 V= Compressed air connection: 6 bar

Condition: good (used), Year of construction: 2005, power: 7.5 kW (10.20 HP), pressing force: 120 t, stroke length: 1,000 mm, operating speed: 10 mm/s, reverse speed: 120 mm/s, throat depth: 400 mm, clearance between the columns: 2,550 mm, total length: 5,700 mm, total width: 1,800 mm, total height: 3,100 mm, overall weight: 9,650 kg, Equipment: documentation/manual, Press brake SAFAN - H-Brake 120TS1 MACH-ID 9820 Make: SAFAN Type: H-Brake 120TS1 Control: TS1 YOP: 2005 Max. bending length: 3100mm Distance between column: 2550mm Hodpoz Hka Aofx Aa Iju Max. pressing force: 120T Dis. Beam - Table: 470mm Beam stroke: 180mm Troth beam: 400mm Approch speed: 200mm/min. Working speed: 10mm/min. Return speed: 120mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: Y1 / Y2 / X/ Z1 / Z2 / R-Central Control: TS1 Crowning: Yes Hydraulic toolclamping: Yes Power: 7.5kW Length: 5700mm Width: 1800mm Height: 3100mm Weight: 9650kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, DURMA E30120 CNC DOWNSTROKING PRESSBRAKE. 3 METRES 120 TONNES CYBELEC DNC 60 CONTROL Hodpfx Aaez Hfhuo Iou SAFETY GUARDS

Condition: as good as new (ex-display), overall weight: 7,700 kg, United Austrian Iron and Steel Works press brake Type: AG BAHM 100 4 Hjdoz Hbu Rspfx Aa Iou Capacity: 4000 x 100 tons Weight: 7700 kg The machine can be placed in a museum and is sold as is, where it is.

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 82225, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, pressing force: 100 t, stroke length: 200 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, table width: 160 mm, throat depth: 250 mm, clearance between the columns: 2,050 mm, oil tank capacity: 200 l, total length: 3,000 mm, total width: 1,700 mm, total height: 2,400 mm, overall weight: 6,900 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic press brake HACO ERM 25100 Year of manufacture: 2005 Hedpfx Asz Er E Dsa Isu 100Tx2500 Light barrier: Fiessler AKAS Tool holder: AMADA Promecam Typ A tool holder Backgauge: Controlled X-R-Z1-Z2 axes New 2026 control system! Immediately available! Can be viewed under power!

Condition: used, Year of construction: 2008, MECOS 7-AXIS PRESS BRAKE Model SYNCRO 135/3000 Year 2008 Weight kg 13,000 Dimensions mm 4820x2500 H 2850 CNC ESA FEATURES Type of press brake: Hydraulic, Synchro, 7-axis Maximum force: 135 tons Maximum distance between uprights: 450 mm Maximum stroke: 200 mm Approach speed: 200 mm/s Working speed: 0 ÷ 10 mm/s Return speed: 130 mm/s Back gauge stopping distance: 11 mm Laser safety distance – punch: 16 mm Hjdpjz Dwkpjfx Aa Iju Voltage: 400 V Electrical power supply: 50 Hz Phases: 3 Motor power: 15 kW Tank capacity: 200 liters Maximum pressure in hydraulic circuit: 310 bar Length of lifting cables: 2 m Noise level at operator station: 64 dB(A) Machine complete with operating manual and a copy of the CE declaration of conformity. All technical data provided are indicative and may be subject to change without prior notice; therefore, they should not be considered binding.

Condition: used, Year of construction: 2000, input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 9,200 kg, Equipment: safety light barrier, We offer this used TRUMPF Trumatic 2000 R punch machine, year of construction 2000. Maximum punching capacity: 180 kN Type: 9110 Serial number: 700359 Year of manufacture: 2000 Hedez Ak Dispfx Aa Isu Mains supply voltage: 400 V Mains supply frequency: 50 Hz Connected load: 17 kVA Distribution voltage: 400 V Control voltage: 24 V DC Fuse rating: 3 x 35 A Air pressure: 7-14 bar Machine weight: 9200 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2009, Used 3-meter Safan E Brake Type: E Brake 100 3100 TS1 Capacity: 3100 x 100 tons E Control CNC control system Y1, Y2, X, R, Z1, and Z2 CNC control Wila New Standard hydraulic top clamping system Year of manufacture: 2009 New PC installed Hsdpfx Aaszz N R Ej Ieu

Condition: good (used), Year of construction: 1999, power: 16.5 kW (22.43 HP), pressing force: 115 t, stroke length: 250 mm, operating speed: 10 mm/s, table width: 95 mm, table length: 4,100 mm, throat depth: 300 mm, distance table to ram: 350 mm, clearance between the columns: 3,700 mm, total length: 4,800 mm, total width: 2,200 mm, total height: 3,600 mm, overall weight: 18,500 kg, distance between stands: 3,700 mm, Press brake, bending length 4100 mm, capacity 115 to, control DELEM DA 65, gap between column 37000 mm, stroke 250 mm, throat gap 300 mm, motor 16,5 KW, back gauge 800 mm motorized, dimension 4800x2200x3600 mm, weigth ca. 1850,0 kgs, tools Hedpszzpwlsfx Aa Iou

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, power: 9 kW (12.24 HP), input voltage: 380 V, pressing force: 100 t, stroke length: 300 mm, operating speed: 9 mm/s, reverse speed: 71 mm/s, table width: 90 mm, table height: 900 mm, throat depth: 520 mm, ram plate length: 3,060 mm, distance table to ram: 500 mm, clearance between the columns: 2,620 mm, oil tank capacity: 200 l, total length: 4,220 mm, total width: 2,335 mm, total height: 3,010 mm, overall weight: 10,500 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, safety light barrier, CNC Press Brake COLLY BOMBLED PS 3000 LS 100/3 – 100 tons x 3,060 mm – 8 axes – DELEM DA66W We are offering this CNC press brake from COLLY BOMBLED for sale due to an upgrade of our machine park. This is our own production machine. We are a metalworking company and not a machine tool reseller. The machine is in very good working condition, has been regularly maintained, and has seen little use for its age, with only approximately 220,000 bends recorded. The machine can be viewed and tested in operation at our workshop in France. MAIN FEATURES Manufacturer: COLLY BOMBLED Model: PS 3000 LS 100/3 Year: 2008 Serial number: 085049 Pressing force: 1,000 kN / 100 tons Bending length: 3,060 mm Distance between uprights: 2,620 mm CNC control: DELEM DA66W 2D graphical Number of axes: 8 Number of bends: approximately 220,000 8-AXIS CONFIGURATION Y1 – Y2 Hjdpjzybffsfx Aa Iju X1 – X2 R1 – R2 Z1 – Z2 Motorized COLLY S3001 back gauge. CNC CONTROL DELEM DA66W with 2D graphical interface. Graphical programming of parts and bending sequences, axis management, bending table function, and visualization of bending operations. CONDITION / MAINTENANCE Machine regularly maintained. Hydraulic overhaul recently performed. Inspection and maintenance performed directly by COLLY BOMBLED. All guards and safety equipment are present. Machine is fully functional and available immediately. The sale is solely motivated by an upgrade of our machine park. TECHNICAL DATA Slide stroke: 300 mm Gooseneck: 520 mm Table / slide opening: 500 mm Table width: 90 mm Table height: 900 mm Approach speed: 100 mm/s Bending speed: 9.2 mm/s Return speed: 71 mm/s Motor power: 9 kW Approximate capacity for S235 steel over the entire length with V = 10 x thickness: 5 mm. DIMENSIONS / WEIGHT Height: 3,010 mm Width: 2,335 mm Length: 4,220 mm Weight: approximately 10,500 kg LOCATION / LOADING Machine located in our Metal360 workshop in France. Machine can be viewed and tested in operation by appointment. The building allows for lifting and loading the machine directly onto the truck, which facilitates its removal. Operating video and additional photos available upon request. Price: €34,900 (excluding VAT) Machine available immediately.

Condition: good (used), Year of construction: 1989, machine/vehicle number: 4113, functionality: fully functional, operating hours: 4,109 h, overall weight: 6,600 kg, Hydraulic press brake Manufacturer: DoneWell, Hahn & Kolb Stuttgart Type: 80 - 2500 Year of manufacture: 1989 Control system: Cybelec Model Eva Pac Max. working width: 2500 mm Max. clamping force: 100 t Back gauge: 750 mm with 2 stop fingers Condition: good Die: Multi V 7 angle Tools Hjdezyanlepfx Aa Iou

Condition: good (used), Year of construction: 1983, power: 7.5 kW (10.20 HP), pressing force: 100 t, throat depth: 400 mm, clearance between the columns: 1,530 mm, total length: 2,150 mm, total width: 1,650 mm, total height: 2,000 mm, overall weight: 4,300 kg, distance between stands: 1,530 mm, Bending length 2100 mm, capacity 100 to, gap between column 1530 mm, stroke 100 mm, throat gap 400 mm, motor 7,5 KW, back gauge manual 250 mm, dimension 2150x1650x2000 mm, weigth ca. 4300 kgs, lot of tools Hsdpfxszx Hcaj Aa Isu

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, pressing force: 100 t, stroke length: 100 mm, throat depth: 400 mm, overall weight: 6,000 kg, working length: 3,000 mm, TECHNICAL DETAILS Axes: 5 Pressing force: 1,000 kN (100 t) Maximum bending length: 3,000 mm Distance between side supports: 2,600 mm Overhang: 400 mm Stroke: 100 mm Hedpfszxnggjx Aa Isu Installation height: 370 mm Number of cylinders: 2 Rapid traverse: approx. 85 mm/s Working speed: 10 mm/s Return speed: approx. 80 mm/s MACHINE DETAILS Oil filling capacity: approx. 85 l Motor power: approx. 10 kW Dimensions & Weight Dimensions (L x W x H): approx. 3,300 x 1,930 x 2,325 mm Machine weight: approx. 6,000 kg

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 91.898, functionality: fully functional, pressing force: 100 t, stroke length: 120 mm, throat depth: 250 mm, controller model: HACO ATL 565, working width: 3,600 mm, TECHNICAL DETAILS Press force: 100 t Max. working width: 3,600 mm Frame spacing: 3,300 mm Overhang: 250 mm Max. stroke: 120 mm Back gauge depth: 600 mm Crowning system: Mechanical Hodpfxozxdxxe Aa Isu MACHINE DETAILS Drive system: CNC Control system: HACO ATL 565 Number of axes: 3 (Y1 + Y2 + X) Dimensions & Weight Dimensions (L x W x H): 4,800 x 1,800 x 2,250 mm Weight: 8,200 kg Transport packages: 2 EQUIPMENT Mechanical crowning system Quick-release die holder Tool holder in European style Tools CE marking

Condition: good (used), Year of construction: 2011, functionality: fully functional, Press force: 36 t Bending length: 1020 mm Distance between uprights: 932 mm Overhang: 150 mm Stroke: 120 mm Usable installation height: 295 mm Y-axis working speed: 10/25 mm/sec Y-axis rapid traverse: 220 mm/sec Working height: 1150 mm Machine weight approx.: 2,600 kg Space requirement approx.: 1805 x 1330 x 2380 mm TruBend 7036 Cell Edition Standard equipment: TruBend 7036 Cell Edition: - Electromechanical direct drive (torque motor) - Rear stop system with 6 axes and stop sensors - Positionable Wila tool clamping system - Control cabinet air conditioning BendMaster: - Stable base and manipulator - Load capacity 15 kg, max. sheet weight 3 kg - Floor-mounted track, welded construction with stable guide rail - Travel range 3215 mm - Gripper coupling on the BendMaster - Electric drives - Tongs with jaws LoadMaster Bend: - Handling system - Multi-suction device Hedszwla Uepfx Aa Isu - Double sheet detection and singulation - Transfer system - System pallet Safety: - Protective enclosure with pivoting sliding doors Control: - PC control with 19" touchscreen - Mobile operating terminal - Network connection - Remote service via the Internet

Condition: used, Year of construction: 2011, total length: 4,800 mm, total width: 1,800 mm, total height: 2,250 mm, Colour: Grey Weight: 8.200 kg Price: On request - Year: 2011 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 91898 Hedpfx Aaeztxlvj Isu - Drive system: CNC - Control system brand: HACO - Control system type: ATL 565 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 100 - Max. working width [mm]: 3600 - Column gap [mm]: 3300 - Throat depth [mm]: 250 - Backgauge depth [mm]: 600 - Max. stroke [mm]: 120 - Crowning system: Mechanical - Punch holder: Quick-release - Tool holder type: European-style - Tools included: Yes - Transport dimensions: 4800mm x 1800mm x 2250mm (l x w x h) - Transport weight [kg]: 8200kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2012, tonnage 100 T Folding length 3100.00 mm guarding AKAS FIESSLER machine mounted laser guards CNC Cybelec 880s Throat 250.0 mm Vertical stroke 200 Working speed 100mm per/sec Axis number 4 Motor power 11.0 kW ----- Weight 9000.0 kg condition excellent Hjdpfx Aajztl Nzj Iju can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, pressing force: 100 t, stroke length: 200 mm, Equipment: CE marking, safety light barrier, For Sale: Bystronic Xact 100 CNC Press Brake (3.1m x 100T) Hodpfszta A Aox Aa Iju Available immediately: A exceptionally clean, well-maintained Bystronic Xact 100 CNC Press Brake (2012 Model). This free-standing, down-stroking machine offers precision 4-axis bending with automated crowning, making it an excellent addition to any precision fabrication facility. Detailed technical specifications and machine configurations can be verified through the Bystronic Official Group Website. Machine Overview & Configuration Control system: Equipped with a Cybelec DNC 880S Control unit. Axis configuration: 4-Axis control plus crowning (Y1, Y2, X, R + Manual Z). Safety systems: Integrated Fiessler Laser Guards for optimal operator protection. Guarding package: Features full rear sliding screen guards and side guards. Wandering foot pedal/pedestal controls. Technical Specifications Parameter Measurement Bending Capacity1000 kN (100 Tonne) Working Length3100 mm Distance Between Frames2550 mm Throat Depth400 mm Maximum Stroke200 mm Rapid Approach Speed100 mm/s Working Speed1 – 10 mm/s Return Speed95 mm/s Overall Weight9000 kg Machine Identity Manufacturer: Bystronic Model: Xact 100Year of Manufacture: 2012 (Model Year 2012)

Condition: good (used), Year of construction: 2014, pressing force: 100 t, table length: 3,050 mm, clearance between the columns: 2,550 mm, overall weight: 7,700 kg, Press force: 100 t Bending length: 3050 mm Hjdpjztakgsfx Aa Isu Distance between uprights: 2550 mm Total power requirement: 20 kW Machine weight approx.: 7,700 kg Accessories/Equipment: - Light curtain in front of the machine - AMADA tool holder with quick-release mechanism - Tools - 2 stop fingers - DELEM DA 60 touch control system - Foot switch - Side protective doors - Operating hours: 2,948 h - 6 axes, Y1, Y2, X, R, Z1, Z2

Condition: used, Year of construction: 2015, functionality: fully functional, For sale: a professional electric CNC bending press, AMADA HFE M2 100-3. Operates very quietly due to its electric drive. The machine is in full working order and has been regularly serviced by Amada. It can be inspected and tested. The machine is sold without tooling. We can offer new tooling based on your requirements. Key information: Manufacturer: AMADA Model: HFE M2 100-3 Date of manufacture: 2015.06 Bending force: 100 T (1000 kN) Working length: 3000 mm Maximum bending length: 3340 mm Technical parameters: Distance between columns: 2705 mm Stroke: 200 mm Depth (to side frame): 420 mm Approach speed: 100 mm/s Working speed: 10 mm/s Return speed: 100 mm/s Power consumption: 10.5 kW Hjdpfxezrwc Ds Aa Ieu Machine dimensions: Length: 4385 mm Width: 2430 mm Height: 2680 mm Weight: 6700 kg Equipment and accessories: Controller: Amada touch screen Upper tool clamping: Amada manual clamping Back gauge: X, R automatic. Z1, Z2, Z3, Z4 mechanical. Laser protection: CE – AKAS automatic laser If you have any further questions, we will be happy to answer them.

Condition: used, Year of construction: 2002, functionality: fully functional, pressing force: 100 t, stroke length: 200 mm, table width: 100 mm, table length: 3,100 mm, table height: 1,000 mm, throat depth: 380 mm, distance table to ram: 335 mm, clearance between the columns: 2,650 mm, total length: 3,300 mm, total width: 1,850 mm, total height: 2,550 mm, overall weight: 7,600 kg, Equipment: CE marking, documentation/manual, This BEYELER PR 3 press brake represents a reliable solution for sheet metal bending operations. Equipped with a CYBELEC DNC 1200E CNC control system, it has a bending force of 100 tons, a useful length of 3,100 mm, and 3-axis control (X - Y1 - Y2). The machine is complete with DSP Laser safety light barriers and is supplied with a set of tools. Key features: * Year of manufacture: 2002 * CNC: CYBELEC DNC 1200E * Working force: 1000 kN (100 tons) * Bending length: 3100 mm * 3-axis control (X - Y1 - Y2) * Maximum stroke: 200 mm * Distance between uprights: 2650 mm Hsdpezrtt Eefx Aa Ieu * DSP Laser safety light barriers Equipment: - Machine complete with 1 set of tools - Operating manual - CNC manual - Electrical diagrams - DSP Laser light barrier manual - CE declarations of conformity Otto Machine For over 30 years, Otto Machine has been selecting and marketing used machine tools in Italy and abroad. The machines can be viewed at our showroom or via video call. Contact us to receive the complete technical data sheet, photographs, videos, and all information about the machine. It is possible to arrange a visit to our showroom or a video call to view it remotely.

Condition: used, Year of construction: 2001, functionality: fully functional, operating hours: 43,000 h, For sale: TRUMPF L3030 laser cutting machine Hedpezq R D Sefx Aa Isu YEAR 2001 LIFTMASTER+ with loading and unloading shuttles 3000 WATT FORMAT 3000X1500 MAGNETIC TURBINE SIEMENS control

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, Available starting September/October. Hodpfxszn N Hgj Aa Iju Operating hours: Laser: 35,000 hours.