Alima

Condition: good (used), functionality: fully functional, Table dimensions / T-slots 398.8 × 299.7 mm Tank capacity 208.2 L Longitudinal travel X-axis 300 mm Transversal travel Y-axis 200 mm Vertical travel Z-axis 250 mm Max. table load 350 kg Subcategory Die-sinking EDM machine Nledpfx Aajy Eyb Soaoa

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Equipment: documentation/manual, For sale: as-new PEMTec PEM800 Nlodpfxsy Etcvj Aaasa Year: 2019. The machine can be inspected and tested under power. HOW THE PROCESS WORKS With this process, metal parts are machined contact-free and with high precision. An electrically conductive electrolyte—saltwater—is introduced between a negatively charged tool electrode (cathode) and a positively charged workpiece (anode). This electrolyte removes the ionized material from the machining gap between the electrode and the workpiece via anodic dissolution. The electrode is mapped inversely onto the metal surface. The targeted current pulses, oscillating tool electrode, and the extremely small working gap form the basis for the precision of this technology. The PECM process is an advancement of conventional electrochemical machining. By using synchronized current pulses and an oscillating tool electrode, PEMTec enables a very small machining gap. This allows highly precise and economical manufacturing without any process-related tool wear. Absolutely contactless, and free from thermal or mechanical impact, workpieces are produced with profile accuracy and repeatability down to the low micrometer range, and a surface finish of up to 0.03 µm. TECHNICAL DATA › Machine frame made of natural granite › Usable machining area: 375 – 545 mm (min./max.) › Machine table: 660 × 540 mm (W×D) › Installation space: 2,200 × 2,560 × 2,870 mm (W × D × H), without electrolyte treatment system › Maintenance-free precision working axis with direct drive › Fixture mounting via 6 T-slot rails (M10) in the machine table › Real-time process control system with short-circuit detection › HMI via 21.5-inch touchscreen › Water-cooled, modular generator from 1,200 A to 12,000 A › Automatic electrolyte treatment system › Optional XY adjustment aid and C-axis › The power of the electrolyte unit is optimally matched to the respective application. Standard systems are available with capacity from 1,000 or 2,000 liters.

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 256 mm, overall weight: 2,356 kg, number of axes: 4, This 4-axis AgieCharmilles Roboform 54 was manufactured in 2000. It features an X-axis travel of 500 mm, Y-axis travel of 350 mm, and Z-axis travel of 256 mm. The machine can accommodate workpieces up to 850 x 650 x 256 mm and has a maximum workpiece weight of 400 kg. If you are looking to get high-quality die-sinking capabilities, consider the AgieCharmilles Roboform 54 machine we have for sale. Contact us for further details. • Taper (conicity): ±30° / 100 mm • Max. workpiece dimensions: 850 x 650 x 256 mm • Max. workpiece weight: 400 kg • Best surface roughness: Ra ≤ 0.2 µm • Best precision: ±0.005 mm Nodpfxjy Eq Uvj Aaajla • Generator model: 3R-600.83 • Electrical supply: 3~ 400 V / 50–60 Hz • Installed power: 5 kVA • Current: 5 A

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, overall weight: 4,350 kg, number of axes: 3, This 3-axis ONA QX4 die-sinking EDM machine was manufactured in 2017. It features an X-axis travel of 600 mm, Y-axis travel of 400 mm, and Z-axis travel of 400 mm. The work tank dimensions are 1060 x 750 x 480 mm, accommodating a maximum workpiece weight of 1500 kg. If you are looking to get high-quality die-sinking capabilities, consider the ONA QX4 machine we have for sale. Contact us for further details. • Work tank dimensions (L x W x H): 1060 x 750 x 480 mm • Maximum workpiece weight: 1500 kg • Maximum electrode weight: 100 kg • Distance table to headstock: 200–600 mm • Voltage: 400 V • Frequency: 50 Hz • Current: 25.8 A • Power: 17.9 kVA • Minimum air supply: 6 bar • Generator unit weight: 350 kg Nledjy Eq Ipopfx Aaaea

Condition: used, Year of construction: 2021, Diesinking / EDM Nlsdpjy D N D Tofx Aaasa Travel distance X: 600 mm Travel distance Y :420 mm Travel distance Z: 370 mm table size X: 750 mm table size Y: 550 mm max. workpiece size X: 1050 mm max. workpiece size Y: 650 mm max. workpiece size Z: 450 mm max. electrode weight: 50 kg max. workpiece weight: 1500 kg electrode changer: 32 - time Total operating hours: 3315 Linear motors (X, Y, Z axes) Absolute linear scales (X, Y, Z axes) Ceramic machine components Sodick Motion Controller Linear motor cooling unit Dielectric cooling unit SVC circuit "SGF4" nano wear discharge unit TMM4 generator BSN4 finishing circuit SP control 19" TFT color display Intelligent Q³vic EDM Remote control LN Professional AI software for optimal machining parameters 3-sided lowering work tank LAN interface USB interface Operating hours counter Work light C-axis SEC10 (20 rpm) ATC unit (32 stations)

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total height: 2,720 mm, total width: 2,630 mm, overall weight: 6,840 kg, product length (max.): 2,070 mm, number of axes: 3, This 3-axis Sodick AG 55 L die-sinking EDM machine was manufactured in 2008. It features a work table size of 750 x 550 mm and a maximum workpiece weight capacity of 1000 kg. The machine offers an X-axis travel of 550 mm, Y-axis travel of 400 mm, and Z-axis travel of 350 mm. If you are looking to get high-quality die-sinking capabilities, consider the Sodick AG 55 L machine we have for sale. Contact us for further details. • Work table: 750 x 550 mm • Internal tank dimensions: 950 x 725 x 410 mm • Fluid level (min–max): 70–350 mm • Work tank capacity: 248 L • Max workpiece weight: 1000 kg • Spindle to table distance: 280–630 mm • Spindle to table distance: 263–613 mm • Installation footprint: 2070 x 2630 mm • Tank dimensions: 1180 x 1250 x 1035 mm • Full tank weight: 170 kg • Tank capacity: 475 L • Cooling unit dimensions: 520 x 520 x 900 mm • Cooling unit weight: 50 kg • Cooling tank capacity: 19 L Nlodsy Ddmispfx Aaaea • Included feature: Linear motors Additional equipment • Erowa C-axis • 32-position Erowa ATC • UPS

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 350 mm, EDM machine type Agie Mondo Star 50 for sale in very good condition. Includes documentation, electrodes and dielectric fluid upon request. - Machine weight: 2,135 kg - Machine width: 1,550 mm - Machine height: 2,565 mm - Travel in X: 500 mm - Travel in Y: 350 mm - Travel in Z: 350 mm - Max. workpiece dimension: 860x650x315 mm - Max. workpiece weight: 500 kg - Dielectric volume: 530 litres Njdey Ar R Hjpfx Aaasla Loading possible by forklift. Please feel free to contact me with any questions.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Completely Refurbished OPS Ingersoll Gantry 500 Eagle Die-Sinking EDM Machine – Excellent Technical and Visual Condition The machine has undergone a comprehensive, professional refurbishment in our facility and is in outstanding technical and cosmetic condition. During the overhaul, the machine was disassembled by more than 70%. All relevant wear parts, including ball guides and drive spindles, were thoroughly inspected and replaced where necessary. This was followed by a complete geometric measurement, alignment, and additional verification using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. Every hose, including hydraulic and pneumatic lines, was completely replaced. Furthermore, the machine has been fully repainted and visually presents itself in an impeccably maintained state. The generator and control system were cleaned and technically tested. The generator’s cooling unit was also cleaned to ensure reliable cooling and consistent operation. Finally, the machine underwent an extensive EDM test in accordance with OPS Ingersoll's quality and testing standards. The machine is immediately available and is ideally suited for reliable production use. Technical Data: Manufacturer: Ingersoll (OPS Ingersoll) Die-Sinking EDM Machine Model: OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture: 2009 Control system: EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn – quick programming Powertec Handheld – multifunctional manual control device Nlsdpfxsyzw I Io Aaasa Manual eroding via Powertec Handheld High-Speed Jump: max. 18 m/min Generator output: 60 Ampere, EAGLE Powertec Travel paths (X, Y, Z): 525 x 400 x 450 mm Electrode changer: 20-position pick-up carousel Work tank (W x D x H): 770 x 670 x 440 mm Worktable (W x D): 750 x 650 mm Load capacity: 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special features: Linear measuring system on all axes (Z axis standard in series)

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, travel distance X-axis: 565 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 415 mm, workpiece weight (max.): 1,000 kg, table width: 600 mm, table length: 840 mm, TECHNICAL DETAILS Table size: 840 x 600 mm Dielectric fluid above table: 360 mm Maximum workpiece weight: 1,000 kg T-slots: 4 x 10 mm Distance table - quill without chuck max: 595 mm Distance table - quill without chuck min: 180 mm Travel X-axis: 565 mm Travel Y-axis: 400 mm Travel Z-axis: 415 mm Resolution X - Y - Z: 0.001 mm Resolution axis C: 0.001 Rapid traverse speed: 800 mm/min Max. electrode weight without rotation: 100 kg Max. electrode weight with rotation: 15 kg MACHINE DETAILS Dimensions & Weight Dimensions (H x W x D): 2760 x 1110 x 1840 mm Weight: 2,750 kg Dielectric supply Tank capacity: 400 liters Paper cartridge filters: 4 pcs Generator Dimensions (H x W x D): 1800 x 600 x 920 mm Weight: 300 kg Rated current: 60 - 120 A Nlodjyzn Ryopfx Aaasa Connected load: 15 - 23 kVA

Condition: used, TECHNICAL DETAILS TRAVELS - Travels on X/Y/Z axes : 600x400x310 [mm] - Travels on U/V axes : [mm] - Max. taper : [°/mm] PART - Max. part dimensions : 1050x820x300 [mm] - Max. part weight : 1000 [kg] WIRE GUIDE - Wire diameter : 0.1-0.3 [mm] - Coil weight : 16 [kg] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 13 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2650x3050 [mm] - Machine height : 2070 [mm] - Machine weight : 3600 [kg] MACHINE HOURS - Spark erosion hours : 15000 [h] EQUIPMENT - CNC : Fanuc 31iw-model B - Cooling unit Nlodpfoyxhmvjx Aaasa - Filtration unit

Condition: used, TECHNICAL DETAILS TRAVELS - Travels on X/Y/Z axes : 600x400x310 [mm] - Travels on U/V axes : [mm] - Max. taper : [°/mm] PART - Max. part dimensions : 1050x820x300 [mm] - Max. part weight : 1000 [kg] WIRE GUIDE - Wire diameter : 0.1-0.3 [mm] - Coil weight : 16 [kg] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 13 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2650x3050 [mm] - Machine height : 2070 [mm] - Machine weight : 3600 [kg] MACHINE HOURS - Spark erosion hours : 10000 [h] Nljdpfjyxhmpox Aaaja EQUIPMENT - CNC : Fanuc 31iw-model B - Cooling unit - Filtration unit

Condition: used, TECHNICAL DETAILS TRAVELS - Travels on X/Y/Z axes : 600x400x310 [mm] - Travels on U/V axes : [mm] - Max. taper : [°/mm] PART - Max. part dimensions : 1050x820x300 [mm] - Max. part weight : 1000 [kg] WIRE GUIDE - Wire diameter : 0.1-0.3 [mm] - Coil weight : 16 [kg] Nodpfeyxhmijx Aaaela POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 13 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2650x3050 [mm] - Machine height : 2070 [mm] - Machine weight : 3600 [kg] MACHINE HOURS - Spark erosion hours : 2000 [h] EQUIPMENT - CNC : Fanuc 31iw-model B - Cooling unit - Filtration unit

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 450 mm, controller model: CNC MITSUBISHI 32bit, TECHNICAL DETAILS Travel X-axis: 550 mm Travel Y-axis: 850 mm Travel Z-axis: 450 mm Y-axis travel for electrode change and loading position: 1,180 mm Integrated C-axis head, adjustable rotation speed: 10/20 rpm Integrated C-axis head, measurement resolution: 0.001 mm Table dimensions: 850 x 550 mm Load capacity without changer: 50 kg Load capacity with changer: 10 kg Minimum head weight: 200 kg Distance from tool carrier plate to worktable max.: 585 mm Distance from tool carrier plate to worktable min.: 125 mm MACHINE DETAILS Control: CNC MITSUBISHI 32bit Tank dimensions (W x D x H): 800 x 1,100 x 480 mm Dielectric height programmable/automatic: 440 mm Filter cartridge type: Integrated cartridges Electrode changer system / pick-up disc magazine slots: 20 Electrode weight / single electrode: 15 kg Total changer weight: 60 kg Generator FP70: ampere multipulse Electrode changer: 20-position pick-up linear changer Current: 70 A Dimensions & Weight Nlsdpjywguvofx Aaasa Space requirement: approx. 2.4 x 2.65 x 2.68 m Machine weight: approx. 6,000 kg EQUIPMENT Electric hand-held control unit CO2 fire extinguishing system integrated / Dielectric cartridge filter system

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Completely Refurbished OPS Ingersoll Gantry 500 Eagle Die-Sinking EDM Machine – Excellent Technical and Visual Condition The machine has undergone a comprehensive, professional refurbishment in our facility and is in outstanding technical and cosmetic condition. During the overhaul, the machine was disassembled by more than 70%. All relevant wear parts, including ball guides and drive spindles, were thoroughly inspected and replaced where necessary. This was followed by a complete geometric measurement, alignment, and additional verification using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. Every hose, including hydraulic and pneumatic lines, was completely replaced. Furthermore, the machine has been fully repainted and visually presents itself in an impeccably maintained state. The generator and control system were cleaned and technically tested. The generator’s cooling unit was also cleaned to ensure reliable cooling and consistent operation. Nljdsyrqpfspfx Aaaoa Finally, the machine underwent an extensive EDM test in accordance with OPS Ingersoll's quality and testing standards. The machine is immediately available and is ideally suited for reliable production use. Technical Data: Manufacturer: Ingersoll (OPS Ingersoll) Die-Sinking EDM Machine Model: OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture: 2009 Control system: EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn – quick programming Powertec Handheld – multifunctional manual control device Manual eroding via Powertec Handheld High-Speed Jump: max. 18 m/min Generator output: 60 Ampere, EAGLE Powertec Travel paths (X, Y, Z): 525 x 400 x 450 mm Electrode changer: 20-position pick-up carousel Work tank (W x D x H): 770 x 670 x 440 mm Worktable (W x D): 750 x 650 mm Load capacity: 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special features: Linear measuring system on all axes (Z axis standard in series)

Condition: used, Year of construction: 2017, Diesinking / EDM Travel distance X: 600 mm Travel distance Y :400 mm Travel distance Z: 450 mm table size X: 750 mm table size Y: 600 mm max. workpiece size X: 1040 mm max. workpiece size Y: 730 mm max. workpiece size Z: 410 mm max. electrode weight: 50 kg max. workpiece weight: 1600 kg generator: 64 Ampere cooler drop tank control Charmilles Charmilles control system High precision mold and tool machining Integrated EDM generator Dielectric system with cooling Nedpeym Rr Nefx Aaajla Suitable for tool and mold making

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, overall weight: 6,440 kg, controller manufacturer: SODICK, controller model: LP1, number of axes: 3, This 3s Sodick AG55L die-sinking edm machine was manufactured in 2008. With a magazine capacity of 32 positions and a maximum workpiece weight of 1000 kg, it offers robust capabilities for precision machining. The X travel reaches 550 mm and Y travel extends to 400 mm, making it suitable for various applications. Consider the opportunity to buy this Sodick AG55L die-sinking edm machine. Contact us for further details. Nlodpfeyk Ddyox Aaaoa • Magazine capacity: 32 positions • Table dimensions: 750 × 550 mm • Internal tank dimensions: 1100 × 950 × 500 mm • Maximum workpiece weight: 1000 kg • Maximum electrode weight: 50 kg • There are 2 equal machines available

Condition: refurbished (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,600 kg, total height: 2,780 mm, total width: 2,265 mm, total length: 2,110 mm, quill stroke: 450 mm, workpiece length (max.): 1,220 mm, workpiece width (max.): 870 mm, workpiece height (max.): 470 mm, GF AgieCharmilles FORM P600 Year of manufacture: 2021 Powerful and precise die-sinking EDM machine specifically engineered for demanding applications in tool and mold making. Thanks to its state-of-the-art control system, excellent surface finish, and high efficiency, it presents an outstanding investment opportunity for companies valuing precision and cost-effectiveness. Key Features & Benefits: ✅ Large working area & high load capacity: Travel ranges (X/Y/Z): 600 x 400 x 450 mm Maximum workpiece size: 1,220 x 870 x 470 mm Maximum workpiece weight: 1,600 kg Maximum electrode weight: 50 kg ✅ High-precision machining with state-of-the-art technology: Accurate positioning ensured by linear glass scales (no recalibration required) Innovative ISPG generator (Intelligent Speed Power Generator) for maximum efficiency Adaptive control (ACC & ACO) for optimized spark erosion and reduced electrode wear Surface finish up to Ra 0.08 μm ✅ Powerful control system & automation: AC FORM HMI with intuitive user interface & touchscreen Automatic CAD/CAM integration for seamless data transfer Job management with prioritization and real-time monitoring Remote monitoring via SMS notification ✅ Maximum productivity & flexibility: Nledsyizmiepfx Aaaoa Automatic 16-position electrode changer for unattended machining Intelligent workpiece measurement & 3D correction Reduced electrode wear thanks to iQ technology ✅ Reliability & low operating costs: Robust C-frame design for high stability Efficient dielectric management with 6 filter cartridges Energy-efficient operation with low maintenance requirements Ideal for: ✔ High-precision tool and mold machining ✔ Series production with stringent quality demands ✔ Complex geometries and fine surface textures The machine will be cleaned, serviced, and thoroughly tested after your order to guarantee top quality and reliability. We are also happy to commission the machine at your facility after delivery.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 95428, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,600 kg, workpiece length (max.): 1,200 mm, TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 450 mm Table length: 750 mm Table width: 600 mm Maximum workpiece length: 1,200 mm Nlodjyhn Hgspfx Aaaja Maximum workpiece width: 850 mm Maximum workpiece height: 400 mm Maximum workpiece weight on table: 1,600 kg Tool changer (number of tools): 24 Maximum electrode weight: 100 kg MACHINE DETAILS Connection: 50 Hz 3x 400 V Dimensions & weight Dimensions (L x W x H): 3,150 x 2,750 x 2,960 mm Machine weight: approx. 4,500 kg EQUIPMENT C-axis Tool holder system EROWA Fire suppression system Lamp

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,600 kg, total height: 2,780 mm, total width: 2,265 mm, total length: 2,110 mm, quill stroke: 450 mm, workpiece length (max.): 1,220 mm, workpiece width (max.): 870 mm, workpiece height (max.): 470 mm, GF AgieCharmilles FORM 300 Year of manufacture: 2014 Die-sinking EDM machine in C-frame design (fixed table) with automatic lowering tank Travel paths (X/Y/Z): 600 x 400 x 450 mm Maximum workpiece size: 1220 x 870 x 470 mm Table dimensions: 750 x 600 mm Maximum workpiece weight: 1,600 kg Maximum electrode weight: 50 kg Innovative ISPG Generator (Intelligent Speed Power Generator) for maximum efficiency Maximum working current: 80 amps Nljdox Sv E Hopfx Aaasa Surface finish up to Ra 0.08 µm AC FORM HMI with intuitive user interface & touchscreen Intelligent workpiece measurement & 3D correction Reduced electrode wear thanks to iQ technology Adaptive control (ACC & ACO) for optimized spark erosion and reduced electrode wear Pneumatic chuck of your choice (Erowa or 3R Systems) Includes 6-position electrode changer LTC Machine dimensions: 2265 x 2110 x 2780 mm Total weight: 4,500 kg The machine will be cleaned, overhauled and extensively tested prior to sale to ensure the highest quality and reliability. We are also happy to offer you additional services: - Transport - Commissioning - Training - Accessories such as clamping devices

Condition: ready for operation (used), Year of construction: 2017, operating hours: 6,417 h, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, overall weight: 4,400 kg, number of axes: 4, This 4-axis AgieCharmilles FORM 30 was manufactured in 2017. It features a stroke of 600mm x 400mm x 400mm, with axis speeds up to 6 m/min. The machine can handle workpiece weights up to 1000kg and dimensions of 1000 x 700 x 400 mm. It includes a dielectric unit with a 750l capacity and a robust weight of 4400kg. Consider the opportunity to buy this AgieCharmilles FORM 30 die-sinking EDM machine. Contact us for more information about this machine. • Axis speed (X/Y/Z): 4 / 4 / 6 m/min • Position reading accuracy (X/Y/Z): 0.1 µm • C-axis (standard) rotation speed: 0–100 rpm • Work tank size: 1200 x 800 x 500 mm Nodpox Nr N Nefx Aaajla • Worktable size: 800 x 600 mm • Max electrode weight: 100 kg • Max workpiece weight: 1000 kg • Workpiece dimensions: 1000 x 700 x 400 mm • Dielectric unit capacity: 750 l • Generator type: ISPG • User interface: AC FORM HMI • Power supply: 3 x 380 V, 3-phase, 50 Hz

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 520 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, OPS Ingersoll Gantry Eagle 500 die-sinking EDM machine in very good condition. Nsdpfx Aasx Htfyoajla 3R clamping system Year of manufacture: 2017. Inspection under power possible.

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, total height: 2,635 mm, overall weight: 4,020 kg, This Sodick AD 55 L die-sinking EDM machine was manufactured in 2016. It features a work tank with internal dimensions of 1200 x 800 x 500 mm and a capacity of 470 liters, supporting a maximum workpiece weight of 1000 kg. Equipped with a cooling unit for the linear motor, a C-axis, and a SGF generator unit, it offers robust performance for precision applications. Contact us for more information about this machine. Additional equipment • Features: 10-year warranty on positioning accuracy, LN Professional, Cooling unit for linear motor, Glass scales (X, Y, Z axes), Remote control, USB port, Shuttle ATC, C-axis (SEC-10), SGF generator unit, 15" TFT touchscreen, Dielectric cooling unit, Automatic voltage stabilizer, Paper filters (2), Fire extinguisher, Mouse, LAN port, Work lighting Machine Benefits Technical Machine Benefits • Machine footprint (w x d): 3300 x 3535 mm • Work tank internal dimensions (w x d x h): 1200 x 800 x 500 mm • Work tank capacity: 470 l • Workbench size (w x d): 750 x 550 mm • Air flow: 100 nl/min • Power requirement: 3-phase 50/60hz, 10 kva Njdpfxex D Riue Aaaola Extra Information Machine operating times: Machine switch-on time: 3089 hours Machine processing time: 1488 hours Accessories: 40 Erowa electrode holders On request, copper rod material, various threads and rod electrodes are available at an additional cost at the current copper hine still under power Dimensions Machine Depth 2335 mm

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total height: 2,200 mm, This 3-axis AgieCharmilles Spirit 3 was manufactured in 2008. It features an integrated C-axis and electrode magazine, multitasking operating system with object-oriented graphical interface (AEP Spirit), and a table size of 850×650 mm. Movement range includes X:550, Y:400, Z:350. Consider the opportunity to buy this AgieCharmilles Spirit 3 wire EDM machine. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Table size: 850 mm x 650 mm • Wear parts, some drive motors, and bearings have been replaced over the years. • Integrated c-axis and integrated electrode magazine. Njdpfx Aaox D N Hrsaela Dimensions Machine Depth 1800 mm

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, total height: 2,858 mm, overall weight: 4,400 kg, This AgieCharmilles FORM 30 was manufactured in 2014. A robust die-sinking EDM machine, it's ideal for detailed and precise metalwork. Consider the opportunity to buy this AgieCharmilles FORM 30 die-sinking edm machine. Contact us for more information. Machine Benefits Technical Machine Benefits • Work tank size: 1200x800x500 mm Njdpfx Asx D D Dfeaajla • Work table size: 800x600 mm Extra Information Machine still under power Dimensions Machine Depth 1600 mm

Condition: ready for operation (used), Year of construction: 2012, operating hours: 7,357 h, travel distance X-axis: 600 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 370 mm, This Sodick AG60L Die-sink EDM machine was manufactured in 2012. It features a ceramic table measuring 750 x 550 mm and can handle a maximum workpiece weight of 1500 kg. The machine includes a linear motor, glass scales, and a remote control for enhanced precision and ease of use. Consider the opportunity to buy this Sodick AG60L die-sink EDM machine. Contact us for more information about this machine. Nlsdpfx Aajx D Rytjaoa Additional equipment • Replaceable paper filter / SEC-10 (C-axis) / SGF2 Nano Wear Unit / Fire Extinguisher / TMM3 Power Generator / Dielectric Cooling Unit / 15" TFT Touch Screen / Lowerable Work Container • Linear motor (X-, Y-, Z-axes) / Glass scales in X-, Y-, Z-axes / Ceramic work area / Remote control • Accessories include electrodes (graphite, tungsten, and copper), electrode holders, and jigs with documentation. / Some electrode holders with electrodes are still in the machine. Machine Benefits Technical Machine Benefits • Dimensions of machine (lxwxh): 1852 x 2825 x 2570 mm / machine weight: 5350 kg • Max. Workpiece weight: 1500 kg / ceramic table dimensions (w x d): 750 x 550 mm • Floor-table distance: 850 mm / max. Electrode weight: 50 kg • Dielectric fluid level (min-max): 150 - 400 mm / dielectric capacity: 465 l