Generators

WMT SL 3000

Condition: ready for operation (used), functionality: fully functional, LINDNER wood chipper for sawmill offcuts, model T 400/140-2 – after technical inspection – in very good condition – suitable for producing technological wood chips TECHNICAL SPECIFICATIONS: infeed width: 400 mm infeed height: 140 mm rotor diameter: 450 mm rotor length: 400 mm main motor power: 33 kW infeed motors power: 2 x 1.5 kW Gksdpfx Aer Ak Rgsivec number of knives: 2 pieces screen dimensions: 60 mm x 90 mm infeed rollers in very good condition feeder motor power: 1.5 kW feeder length: 4,200 mm transport dimensions (L/W/H): 430 / 240 / 150 cm weight: approx. 2,000 kg

Condition: excellent (used), Year of construction: 1985, still very nice veneer saw with planing head Gkjdpfjn An A Tox Aivoc cutting length 3050 mm with rear support and fence

Condition: new, Year of construction: 2026, Miter saw and cut-off saw, type: ZS 200 N - 5 KW motor with machine stand, but without saw blade Machine operated via handwheel and worm gear (rear) Tilting Gedpfxji Dfidj Aivekc Saw blade diameter: 520 mm, saw blade arbor bore: 50 mm Saw blade speed: 2800 rpm 400 volts / 5 KW (S6/40%) motor with brake and automatic star-delta motor switching Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: when tilted: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees when tilted: 140 mm The saw can be tilted to an acute angle of approximately 25 degrees on one side and tilted flat to the left up to 30 degrees. Machine weight: approx. 250 kg Location: Available from stock in 54634 Bitburg - immediately available -

Condition: new, Technical data: Working width: 970 mm Grinding width: 950 mm Working height: 3 - 160 mm 1 steel aggregate 2 combination unit with shoe The shoe is pneumatically pressed Sanding belt dimensions: 970 x 2150 mm Common motor power of 2 grinding aggregates: 11 kW The speed of the feeding belt on the converter: 16-18 m / sec. Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Sanding roll diameter: 150 mm Sanding pad width: 50 mm Sanding belt speed: 18 m / s 1 unit Compressed air consumption: 20l / min Standard equipment: Gkjdpfog A D Anjx Aivjc Mechanical oscillation of the sanding belt without the use of compressed air. ECO GEAR SYSTEM Smooth regulation of the feeding belt on the converter 4-20m / min Automatic star / delta start Steel roller on the first aggregate, rubberized on KOMBI agragata Electronic table height display Automatic reading device for gr. material and table position setting Safety switches Automatic machine switches Main engine brake Rubber pressure rollers 2-roller table at the entrance and exit In stock! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm

Condition: used, Year of construction: 2009, functionality: fully functional, Machines connected in one line (all three machines are only sold together). 1. Veneer crossfeed splicing machine Fisher+Rueckle FZR-15, year 2009 Gsdpfx Aot Akcfsivokc 2. Direct Stacking Device Fisher+Rueckle DAR-22, year 2009 3. Scissor lifting table 1000 kg TECHNICAL DOCUMENTATION (full on request) Veneer Cross-feed Splicing Machine FURNIMASTER FZR-15 Veneer format length (longitudinal to the fibre) 350 - 1500 mm Veneer format width (transverse to the fibre) 50 - 500 mm Veneer strip thickness 0.3 - 1.5 mm Max machine output 30 cycles/min. (the output rates are related to an average veneer strip width of 100 mm transversely to the fibre) Connected load (basic machine): Power rate 13.5 kW Compressed air pressure 6 bar Power consumption: Electric power 6.2 kWh Compressed air supply 15 NL/min. Dimensions and weight (basic machine): 2940 mm L x 1000 mm W x 1530 mm H. 3200 kg

Condition: used, machine/vehicle number: 1379A, mileage: 1,638 km, power: 179 kW (243.37 HP), first registration: 11/1986, fuel type: diesel, overall weight: 15,322 kg, axle configuration: 3 axles, color: green, gearing type: automatic, Equipment: ABS, all wheel drive, compressor, parking heater, trailer coupling, TUV is made NEW!!! So-KFZ registration , The AM General in a really good condition directly from the Army , Well maintained and maintained, the body is in a super good condition (vehicle from the reserve) , The M944A1 is equipped with: All-wheel drive, 5-speed automatic transmission, transfer case with stowage and off-road gear, power steering (super smooth), air brakes with ABS, 3 front seats, the body has the dimensions: L/W/H 5550 / 2200 / 2200.e L/W/H 5550 / 2220 / 1910mm inside, equipment of the body: lathe, tool cabinet with drawers, grinding stand, welding unit, permanently installed power generator 110 Volt 31KVA driven by vehicle engine (Cummins with 105 operating hours) via auxiliary drive, 2-piston compressor with compressed air tank, air connections in the body, trolley, loader, impact wrench large and small, grinding witch, air connections in the body, trolley, loading device, impact wrench large and small, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch. and small, grinding witch, magnetic drill, vice, large auxiliary heating and ventilation, many sockets, interior lighting, both sides and the rear of the body can be opened, the km are miles, driving license class 2 (truck), tire size 14.00R20 (very good condition) tubeless, top speed 90 km / h, displacement 14011cm? , , 24Volt power supply , The M944A1 has not only Tuv, but also drives reliably :-) can also be insured cheaply as a young timer AM Generalist also already for conversion as a motorhome and long-distance traveler, . All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a call on 0049 (0)2248 le Gru?e Euer Philipp aus dem Hanfbachtal Gkodpfx Aeqx Sxaeivjc

Condition: ready for operation (used), functionality: fully functional, power: 150 kW (203.94 HP), first registration: 12/2026, fuel: diesel, From our stock of used vehicles, we offer you: Fire engine HLF 10 on MB ATEGO 815 4x2 Chassis • Mercedes Benz MB 815D with manual transmission • 110 kW / 150 hp at 4249 cm³ • Power steering • Trailer coupling • First registration 12/2006 • Mileage approx. 28,750 km • Three-point seat belts for all 9 seats Superstructure • Manufacturer: Rosenbauer • 2 PA in the cab + 2 in the superstructure • Design: HLF 10 • Pump capacity 10-1000 Gjdezi Ubfjpfx Aivjkc • Water tank 1,000 l • Stowage for standard equipment • FIAMM signaling system • 230 V charging system A complete inspection and maintenance will be carried out on the vehicle. This includes a thorough check of all technical components such as the engine, transmission, differential, and pumps, as well as the replacement of all filters and lubricants. The vehicles will receive a current TÜV (technical inspection) and SP (safety inspection) certificate. We will be happy to provide you with a specific offer and give you a detailed presentation of the vehicle. Note: All information is provided to the best of our knowledge and belief, without guarantee of completeness and accuracy. Images may show optional equipment. This does not constitute an offer, but rather information. Subject to prior sale!

Year of construction: 1999, condition: used, 4 upright fermentation vats with jacket cooling Additional title: vertical, coolable, stainless steel vessels Max. content: 2500 l Length: 1600 mm Width: 1600 mm Height: 1717 mm Operation / Control: manual Godpfx Aexwy Sljivokc Material: stainless steel 1.4301 Position: free standing Base construction: cylindrical vessel, open at the top, with square tube feet on domes Features: Shell cooling, automatic-valve with temperature control, central bottom outlet with shut-off valve

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 10187, operating pressure: 180 bar, input voltage: 400 V, overall weight: 53 kg, The Kärcher HD 8/18-4 MXA eB Foam Plus Go!Further cold water high-pressure cleaner is a promotional model equipped with numerous special features. This unit is a showroom piece in like-new condition. The device is suitable for daily use in workshops or on the go. The scope of delivery includes the following: - ANTI!Twist - Pressure shut-off - Dirt blaster - eco!Booster - Spray lance, 840 mm - Trigger gun, EASY!Force - High-pressure hose length: 15 m - High-pressure hose type: Flex - Integrated hose reel Godpfx Aisyyv Ukevokc - Power nozzle - Foam lance - Quick coupling - Servo Control Technical data: - Power supply: 400V / 4.6 kW - Working pressure: 180 bar - Flow rate: 380–760 liters/hour - Power cord: 5 m

Condition: used, functionality: fully functional, Single Temperiertechnik STW 1-6-30-M4 Temperature Controller. Gkjdpfjwf Anhox Aivec 4 for sale. 1 piece/300 EUR. Good working condition. Please check out our other listings as well.