Wire and tube bending machine

Wafios BMZ 41

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, control type: CNC control, Equipment: documentation/manual, type plate available, Wafios CNC Bending and Coiling Center with Loading Magazine Gtedpfxexwuuzo Ag Ejt Type: BMZ 41 Machine No.: 2.7680.044 Rear loading of a strip decoiler with a wire straightening machine is not provided for this machine and must be purchased and installed optionally. Working range: Wire diameter: for < 600 N/mm²: 3.0 - 8.0 mm for < 800 N/mm²: 3.0 - 6.0 mm for < 1200 N/mm²: 3.0 - 5.0 mm for < 2000 N/mm²: 3.0 - 4.0 mm Tube diameter: for 50 parts Leg length at the start min. 2 x d Leg length at the end min. 60 mm Distance between two bends:

Condition: as good as new (ex-display), Year of construction: 2012, machine/vehicle number: 925624, Kuka unused stock item KUKA VKR210 R2700 Year of construction : 03/2012 load capacity 210 kg reach 2700mm weight 1412 kg Serial number :: 925625 With connection cable: X21/X31 (00-108-948) 25m and X20/X30 (00-104-744) 25m Control cabinet KRC2 ED05 Serial number: 93863 Weight: 203Kg Year of manufacture: 12/2012 Teach panel 00-107-264 VKRC2 used, fully functional / serial number: 0000562 Robot data: Repeatability: ± 0.06 mm Gsdsrfch Uspfx Ag Eett Axis 1: ± 185º Axis 2: -140 ° / -5 ° Axis 3: -120 ° / 155 ° Axis 4: ± 350 ° Axis 5: ± 122.5 ° Axis 6: ± 350 ° Movement speed of the robot in º / s Axis 1: 105 ° / s Axis 2: 107 ° / s Axis 3: 114 ° / s Axis 4: 136 ° / s Axis 5: 129 ° / s Axis 6: 206 ° / s

Condition: excellent (used), Year of construction: 2012, Technical specifications: Working length: 4300 mm Distance between columns: 3230 mm Press force: 400 tons CNC control: AMADA AMNC Number of controlled axes: 5 CNC crowning Stroke: 350 mm Throat: 420 mm Installation height: 620 mm Motor power: 38.5 kW Gtjdpfewl U Rhox Ag Est Laser monitoring: FIESSLER Table height: 960 mm Dimensions (length x width x height): approx. 5550 x 2950 x 3400 mm Weight: approx. 29.5 tons Condition: Very good condition, approximately 30,000 hours The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), functionality: fully functional, We offer for sale a complete line for multi-point automatic welding of SCHLATTER brand steel wires. We have three fully operational production lines. There are also automatic machines for the production of transverse wires (so called slitting machines with a cutter). Gtodpetvpilefx Ag Est We also have a number of single point welding machines for steel wires.

Condition: refurbished (used), functionality: limited functionality, Year of construction: 2003, operating hours: 24,000 h, pipe diameter (max.): 100 mm, pipe length (max.): 4,100 mm, bending angle (max.): 183 °, bending radius (max.): 300 mm, wall thickness: 8 mm, Transfluid DB 2090 DB CNC Mandrel Tube Bending Machine. Excellent High Quality Germany Machine, with fully refurbished main hydraulic pumps and main head fully reconditioned. Only requires new encoder to be fitted and this machine is ready to go. Features include. 100mm x 1.6mm Tube Maximum Capacity at 1.5D Anticipated Mandrel Withdrawal Fully automatic setup of clamps and follower Boosted Follower for tight radius thin wall tube bending. Long bed with 4000mm over mandrel. Comes with huge amount of tooling worth over AU$150k. Tooling Included: 101.6mm 152mm CLR 101.6mm 200mm CLR 76.2mm 114mm CLR 76.2mm 200mm CLR 76.2mm 238mm CLR Gtsdpfx Ajtrd T Teg Est 63.5mm 96mm CLR 57.2mm 86mm CLR 50.8mm 76mm CLR 44.5mm 67mm CLR 40 x 40 120mm CLR 50 x 50 150mm CLR 60.3mm 150mm CLR 48.3mm 120mm CLR

Condition: good (used), Year of construction: 1996, Kuka KR200-1A Robot Year of manufacture: 1996 Reach: 2400 mm Weight: 1125 kg Payload: 200 kg Hose package VKRC1 controller Gtodec Nyxhjpfx Ag Eet Weight: 136 kg Software version V4.1.7 (Standard Kuka) Teach pendant: Kuka KCP1 Cable set: 7m/15m 101225ä

Year of construction: 1988, condition: used, machine/vehicle number: 103.071.3156.78192, disk of circular saw-Ø: 400 u. 425 mm cutting area at 90° round: 130 mm cutting area at 90° square: 120 x 120 mm cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 110 x 110 mm cutting speeds: 11 u. 22 m/min Gtodpfsz N Amjx Ag Eet forward feed speeds: 670 mm/min cutting length: m. automat. Vorschub bis 1200 mm electrical connection: 380 V, ca. 4 kVA V sawing drive: 1,6/2,5 kW space needed: 1800 x 3800 x 2000 mm weight: ca. 1800 kg

Condition: excellent (used), Year of construction: 2012, loading capacity: max. 1.500 Kg. wire diameter range: 0,5 - 9,0 mm coil outside diam. max. 1.000 mm Gtsdpovam Iisfx Ag Est coil inside diam. min. 300 Kg. speed: 0 - 80 U/min

Condition: like new (used), Year of construction: 2022, operating hours: 500 h, functionality: fully functional, Rok výroby 2022 pouzivany Len 1 rok Godpowz Iahjfx Ag Eott Vysokovýkonná modulárna vypalovačka značiek na paletové kocky 6× výkonná špirála, každá 2 kW (spolu 12 kW) – rýchly ohrev, žiadne prestoje. PLC dotykový display umožňuje použivať samostatne ktorúkoľvek raznicu, čo využijú najma OPRAVARI EUR PALIET. Pracovná teplota až 800 °C – spoľahlivé vypaľovanie aj na vlhkom dreve. Individuálne inteligentné riadenie – každá grzałka má vlastný regulátor teploty pre konzistentnú kvalitu značenia. Kompaktný & integrovateľný dizajn – samostatné stanovište alebo ľahká integrácia do existujúcej linky na výrobu paliet. Modulárna konštrukcia – pri poruche pokračuje výroba; rýchly servis výmenou modulu. Extrémna rýchlosť – všetky kocky palety vypálené naraz; čas cyklu < 3 s. Kvalitné komponenty – priemyselné diely pre dlhú životnosť. Záruka – 12 mesiacov na elektroniku, 6 mesiacov na výhrevné telesá. Vhodné pre: výrobcov paliet, opravárov paliet, linky, ktoré potrebujú rýchle a jednotné značenie (napr. IPPC/brand/logo). Automatický cyklus, dotykovy display, jednoduchá obsluha + 2x dopravníková dráha v CENE! Možnosť vyskúšať

Condition: good (used), Year of construction: 1982, functionality: fully functional, Equippment: 1 Grip feeder system right hand side 1 Eccentricpress 90 kN Godpfx Aon E N Ndeg Eott 3 Standard slide units 1 Narrow slide units 1 control shaft Working range: wire diameter range: 0,5 - 4,0 mm strip metal width: up to 60 mm feeding length: up to 270 mm output: up to 350/min