High Lift stacker

Toyota SWE 120, 910 h!

Condition: like new (used), functionality: fully functional, Year of construction: 2022, Load capacity: 800 kg Pgedpsxlg Tljfx Akiou Span: 5740 mm Portal height: 4700 mm Clear width: 5500 mm Wheelbase: 3000 mm Overall height: 5100 mm with electric hoist ELEKTROLIFT, year of manufacture 2022: Lifting capacity: 800 kg Lifting speed: 6 m/min Fine lift: 1.5 m/min

Condition: used, Electric reach truck, towing truck JUNGHEINRICH type EJC 214 Serial No. 90396426 Year of manufacture 2011 Rated load capacity 1400 kg Load center 600 mm Rated lift height 4300 mm Fork length 1150 mm Overall length 2050 mm Overall width 800 mm Overall height 1900 mm Operating voltage 24 Volt - Triplex mast with 1400 mm free lift - Electric power steering - 1619 operating hours recorded - Battery manufactured in 2012, type 24V 3 PzS 375 (24 Volt/375 Ah) Pgsdoxxmfzspfx Akiou - Automatic charger Jungheinrich 24 Volt, 40 Amps - Surcharge for new UVV inspection = 150 EUR net Weight 1300 kg Good condition

Condition: good (used), Year of construction: 2015, Steering skate length:630mm Steering skate width:220mm Steering skate hight:115mm Skate length: 630mm Skate width: 220mm Skate hight: 115mm Pgodpfx Akewvhpfeieu Max. loading capacity:12T Wheel Ø: 85mm Wheel material: steel Hydraulic jacks: 2 Lifting range of foot:30 - 260mm Lifting range of head:420 - 650mm

Condition: excellent (used), Year of construction: 2023, roll diameter: 85 mm, total width: 800 mm, total height: 650 mm, total length: 1,200 mm, empty load weight: 150 kg, Load moving system CS Skates - ET6 MACH-ID 7822 Make: CS Skates Type: ET6 Year: 2023 Steering skate length:600mm Steering skate width:530mm Steering skate hight:110mm Skate length: 270mm Skate width: 220mm Skate hight: 110mm Max. loading capacity:3 + 6T Number of wheels: 16 Wheel Ø: 85mm Wheel material: Hard Nylon Hydraulic jacks: 2 Lifting capacity: 10T Lifting range of foot:30-260mm Lifting range of head:420-650mm Length: 1200mm Width: 800mm Height: 650mm Pgjdpszcvbzsfx Akiou Weight: 150kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 1,051 h, load capacity: 1,400 kg, lifting height: 4,352 mm, free lift: 1,395 mm, fuel type: electric, mast type: triplex, construction height: 1,915 mm, drive type: Elektro, Stand-on forklift Mast type: Triplex Technical condition: very good Battery voltage: 24V Battery capacity: 375Ah Psdpsxybbyefx Akijgu Battery type: PzS Battery year: 2022 Description: Find your forklift at STA-TECH! Whether pallet truck, electric, diesel or LPG forklift – we offer affordable, ready-to-use models as well as new forklifts. STA-TECH is your partner for: ● Purchase and rental of forklifts and warehouse equipment ● Purchase of used equipment and logistics ● Cross-brand service: repair, maintenance, inspections

Condition: new, Year of construction: 2026, Transport Roller Set WL3 + WF3 – Professional Solution for Moving Heavy Loads Pgodpfx Asvxrauekieu The WL3 transport roller set together with the WF3 support trolley is an advanced solution designed for moving heavy loads weighing up to 6 tons in warehouses, industrial plants, and workshops. The construction of the set ensures even load distribution, high stability, and full operational safety even during intensive use. Safe transport thanks to a durable construction The WL3 transport unit is equipped with 4 polyurethane rollers that ensure smooth movement and vibration absorption. Thanks to the PU tread, it allows safe transport without the risk of damaging the floor surface. The WF3 support trolley stabilizes the load, increasing safety and preventing tilting during movement. The entire set is made of durable and wear-resistant materials, ensuring long service life. Complete set – ideal for industrial applications The WL3 + WF3 set combines high load capacity and durability with ease of operation. Thanks to carefully selected dimensions and practical features, such as adjustable trolley spacing and a transport handle, it enables quick and efficient movement of machines, steel structures, and other large-scale loads. Main advantages of the WL3 + WF3 set: Static load capacity: 6000 kg (3000 kg per each element) Polyurethane tread – quiet and safe transport High stability thanks to optimized support point distribution Adjustable WF3 trolley width: from 50 to 1100 mm Quick operation and easy loading thanks to compact dimensions Technical specifications – WL3 Parameter Value Static load capacity 3000 kg Dynamic load capacity 1800 kg Roller size Ø80 x 70 mm Number of rollers 4 Loading height 110 mm Load-bearing surface per element Ø110 mm Support points 1 Handle length 900 mm Dimensions (L x W) 330 x 420 mm Technical specifications – WF3 Parameter Value Static load capacity 3000 kg Dynamic load capacity 1800 kg Roller size Ø80 x 70 mm Number of rollers 4 Loading height 110 mm Load-bearing surface per element 180 x 110 mm Support points 2 Connecting bar length 860 mm Trolley spacing width 50–1100 mm

Condition: good (used), Year of construction: 1996, operating hours: 8,400 h, functionality: fully functional, power: 18.5 kW (25.15 HP), operating pressure: 8 bar, Max working pressure 7,5 bar power 18,5 kW Pgodpfsyg H Tijx Akieu approx. 8400 working h GA18 age 1996 air dryer FX15 age 2016

Condition: good (used), Year of construction: 2020, operating hours: 3,015 h, load capacity: 2,000 kg, lifting height: 1,660 mm, fuel type: electric, mast type: duplex, construction height: 1,315 mm, empty load weight: 1,200 kg, mileage: 3,015 km, This Still electric stacker from 2020 is in good condition;The capacity is 2,000 kg;The stacker lifts to a height of 1,660 mm;Drive-through height 1,315 mm;Equipped with an INITIAL LIFT and therefore ideal on uneven floors;Only 3,015 hours on the counter;The battery from 2020 is equipped with an automatic filling system and an external charger Make an appointment for a test drive.Video to followFINANCIAL LEASE POSSIBLE, ask for the conditions Calculation is subject to credit acceptance and interest and rate changes, final calculation via our external partner* Psdpfx Akowhld Roisgu

Condition: new, Year of construction: 2026, Professional Machinery Moving Roller Set WL6 + WF6 — Reliable Heavy-Duty Transport Solution The WL6 + WF6 professional machinery moving roller set is a reliable solution designed for moving heavy machines, industrial equipment, and structural components. Thanks to its robust construction, high load capacity, and polyurethane rollers, this set ensures safe and efficient transport in industrial plants, workshops, and warehouses. A key advantage of this system is the ability to maneuver heavy loads even in limited spaces, while minimizing the risk of damaging the floor surface or transported equipment. Main advantages of the WL6 + WF6 roller set High static and dynamic load capacity – up to 6000 kg static load and 3600 kg dynamic load, allowing safe movement of very heavy equipment. Polyurethane roller surfaces – protect both the floor and transported loads against damage. Low loading height (110 mm) – makes it easier to position the rollers under equipment without requiring significant lifting. Compact construction – provides excellent control and easy maneuvering in confined areas. Stable positioning and precise movement – thanks to optimized trolley spacing and support points (1 point for WL6, 2 points for WF6). Design and technology — optimized for industrial loads Pjdpfxsvxrwao Akijgu The components of the WL6 and WF6 sets have been designed for maximum durability and safe operation under demanding industrial conditions. The transport rollers are manufactured from wear-resistant materials, ensuring long service life even during intensive use. Main components of the set: 80 × 80 mm rollers – made of polyurethane, providing smooth and quiet operation even on uneven surfaces. Strong load-bearing platforms – with support surfaces: Ø155 mm for WL6 200 × 180 mm for WF6 These dimensions ensure optimal load distribution and transport stability. 1300 mm connecting bar – allows flexible adjustment of the trolley spacing from 450 to 1700 mm. 1080 mm steering handle – with a steering angle of ±90°, providing increased control during movement. Precision and efficiency — safety and time savings The properly designed WL6 + WF6 roller system minimizes the risk of load shifting or tilting during transport. High-quality polyurethane rollers reduce rolling resistance, which decreases the force required to move heavy machinery. The operator gains full control over the relocation process, while installation and transport work can be completed faster and more efficiently. Standard equipment 1 × WL6 transport roller set 1 × WF6 transport roller set 1300 mm connecting bar Steering handle Technical specifications — WL6 Parameter Value Static load capacity 6000 kg Dynamic load capacity 3600 kg Roller size 80 × 80 mm Number of rollers 8 Loading height 110 mm Load-bearing surface Ø155 mm Support points 1 Steering handle length 1080 mm Steering angle ±90° Dimensions (L × W) 350 × 535 mm Technical specifications — WF6 Parameter Value Static load capacity 6000 kg Dynamic load capacity 3600 kg Roller size 80 × 80 mm Number of rollers 8 Loading height 110 mm Load-bearing surface 200 × 180 mm Support points 2 Connecting bar length 1300 mm Adjustable trolley spacing 450–1700 mm

Condition: new, functionality: fully functional, Year of construction: 2026, A mobile platform for transporting machines and heavy goods weighing up to 4,000 kg. They have polyurethane rollers that prevent damage to the floor in the place of transport. Pgedpfx Ajvxrlkekiou Transport rollers enable easy and safe transport of heavy items. Thanks to the use of rollers with polyurethane tread, the transported machine and the floor are not damaged. The platform has a foldable drawbar. Technical parameters ROLL SIZE Ø80x70 mm NUMBER OF ROLLS 4 LOADING AMOUNT 107 mm BEARING SURFACE ON THE ELEMENT Ø175 mm SUPPORT POINTS 1 DRAWBAR LENGTH 920 mm PLATFORM WIDTH 470 mm WEIGHT 30 kg