Diesel generator

TEHNOLINK I 660kVA DIESEL NEW 2026 BAUDOUIN

Condition: excellent (used), functionality: fully functional, number of ink cartridges: 5, color channels: 5, resolution (max.): 4,800 dpi, paper weight (min.): 52 g/m², paper weight (max.): 360 g/m², paper width (min.): 148 mm, paper width (max.): 330 mm, number of feeding trays: 6, total length: 5,100 mm, total width: 910 mm, total height: 1,510 mm, counter reading (black): 329,094, counter reading (color): 1,692,141, Equipment: auto duplex, brochure finisher, documentation/manual, Ricoh Pro C7100X with very low meter count! This machine is in excellent condition and has only made 2,048,198 prints! The machine has been fully tested and is immediately ready for use. Rjdpfx Asy E N U Ioa Iecb The machine is equipped with an E-43A Fiery Controller with Command Workstation 6.3 installed. This Fiery includes the ES-2000 Spectrophotometer to enable optimal color calibration. The Ricoh Pro C7100X features 2 dual Vacuum Feeders (LCIT RT5100) and an SR5060 Booklet Maker Finisher. This machine has been thoroughly inspected and extensively tested by our own specialized technical team. If you require any further information, please do not hesitate to contact us. Worldwide shipping available.

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 7,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 2,000 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 18,000 rpm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 30 m/min, torque: 38 Nm, overall weight: 65,000 kg, Initial commissioning: 2012 Control system: Heidenhain iTNC 530 X-axis: approx. 7,000 mm Y-axis: approx. 3,500 mm Z-axis: approx. 2,000 mm A-axis: ± 100° C-axis: ± 360° Clamping table: 6,000 x 3,000 x 160 mm (sunken) with 18H12 T-slots / 250 mm spacing 2-axis milling head VH 12 Spindle power: 24 kW Rodpfx Ajyrdc Eja Iocb Spindle speed: max. 18,000 rpm Torque: max. 38 Nm Tool holder: HSK 63A Linear axis drives Feed rate X, Y, Z axes: up to 50 m/min / 30 m/min Axis acceleration X, Y, Z axes: up to 2.5 m/s² Connection data Voltage: 400 V Frequency: 50 Hz Main fuse: 200 A Power consumption: 85 kVA Dimensions, weights Machine footprint without peripherals: approx. 10,000 x 6,650 x 5,900 mm Total weight: approx. 65,000 kg Additional equipment - Double-sided access doors - 10-position tool changer Optional at extra cost: - Wireless probe - Heidenhain remote diagnostics Machine condition Fully functional, very good condition. Can be inspected under power. !!! The machine was completely mechanically overhauled in 2022 !!!

Condition: good (used), I am offering various Samsung multifunctional systems, all from expired leasing contracts. The following devices are available: 24x Samsung X7400LX, 4x Samsung M4583FX, 6x Samsung M4530ND, 9x Samsung C4010ND, 8x Samsung C4060FX, 5x Samsung X4300LX Rjdpfxst Hf Tao Aa Iecb

Condition: excellent (used), Year of construction: 2007, Universal milling machine Manufactured by KUNZMANN. WF 650 Year of manufacture 2007 Technical specifications Manufacturer Kunzmann Type WF 650 Year of manufacture 2007 X-axis 650 mm Y-axis 500 mm Z-axis 450 mm Clamping area 1000 x 600 mm Spindle mount SK 40 Spindle speeds 5 - 6500 rpm Quill stroke 60 mm Vertical head swivels +/- 90 Max. table load 400 kg Feed rates - longitudinal/transverse/vertical 0 - 4000 mm/min Rapid traverse 25 / 25 / 20 m/min Distance between table and vertical milling spindle 100 / 550 mm Distance between table and horizontal spindle 270 / 720 mm Number of tool magazine positions: 20 Tool diameter: 95 mm Tool diameter with 2 free positions: 135 mm Max. tool length: 300 mm Max. tool weight: 7 kg Spindle power: 13 kW Total power requirement: 20 kVA Machine weight: approx. 5.5 t Machine dimensions: L x W x H: 3.80 x 2.70 x 2.40 m Equipment - Heidenhain iTNC 530 control system - Operating instructions - Enclosure - Vertical head with extendable spindle sleeve - Hydraulic tool clamping - Fixed table Redpjwhm S Nefx Aa Iecb - Electronic handheld control panel - Coolant system - Chip conveyor All information is subject to change without notice. A demonstration is available at any time in our showroom.

Condition: new, Year of construction: 2026, functionality: fully functional, coil weight: 10,000 kg, number of straightening rollers: 6, conveyor belt width: 1,500 mm, sheet thickness aluminum (max.): 3 mm, sheet thickness steel (max.): 3 mm, blade shaft diameter: 255 mm, sheet thickness copper (max.): 3 mm, inner diameter: 510 mm, outer diameter: 1,500 mm, mandrel diameter: 510 mm, mandrel length: 1,500 mm, coil width: 1,500 mm, coil outer diameter: 1,500 mm, number of blades: 8, warranty duration: 12 months, straightening roller diameter: 140 mm, total width: 1,500 mm, Slitting line model 1,500 x 3 mm, comprising: - Decoiler Aspo mod. 1500/5Ton (customizable) - Loading table - Feeder and straightener with 6 rollers, diameter 140 mm - Rotary cutter with 4 pairs of circular blades - Automatic punching unit with 20 customized punching stations Redpfx Aaox Hr S So Iocb - Mechanical shear - Aspo recoiler

Condition: used, Technical details: Rsdpfx Ajvc Ax Nja Iscb pressure: 100 t daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 200 m/s ram speed - reverse: 200 m/s Table dimensions: 750 x 560 x 90 mm passage inside table: Ø 26 mm clamping surface ram: BxT: 530 x 400 mm mortise hole in ram: Ø 50 mm cylinder diameter: Ø 250 mm height over floor: 720 mm total power requirement: 17,0 kW weight of the machine ca.: 5,5 t dimension machine xH: 1,8 x 1,2 x 3,2 m

Condition: new, Year of construction: 2019, pressing force: 275 t, pressure:275 t distance between columns:3000 mm total power requirement:30 kW weight of the machine ca.:40 t draw back pressure:27 t pump capacity:Axialpumpe mit Proportionalventil :6000 mm :max. 3000 mm Table dimensions:6000 x 3000 mm table height over floor:700 mm distance between table / ram:1100 mm :450 l Rcedpsfxyigofx Aa Ijb traversing speed:auf X und Y, 30-33 mm/sec. down speed:2-10 mm/sec :2-50 mm/sec. Cylinder hub:900 mm Cylinder diameter:440 mm Stestle extension:200 / 200 mm / Ø :40 mm Siemens Control System:S7 1200 Monitor Siemens 9":Touch Panel Tax desk:tragbar

Condition: new, Fastech horizontal bandsaw semi-automatic BMSY 360 DGH ECO Round cutting range mm: 360 Flat cutting range mm: 510 x 360 Square Cutting range mm: 360 +30 ° Round cutting range mm: 360 +30 ° Flat Cutting range mm: 440 x 360 +30 ° Square Cutting range mm: 360 +45 ° Round Cutting range mm: 360 +45 ° Flat cutting range mm: 390 x 360 +45 ° Square cutting area mm: 360 +60 ° Round cutting range mm: 200 +60 ° Flat cutting range mm: 200 x 360 +60 ° Square cutting range mm: 200 -30 ° Round cutting range mm: 360 -30 ° Flat cutting range mm: 440 x 360 -30 ° Square cutting range mm: 360 -45 ° Round cutting range mm: 360 -45 ° Flat cutting range mm: 390 x 360 -45 ° Square cutting area mm: 360 -60 ° Round cutting range mm: 260 -60 ° Flat cutting range mm: 260 x 360 -60 ° Square cutting range mm: 260 Engine power main drive kW 3 Hydraulic pump power kW 0,37 Engine power coolant pump kW 0,12 Band speed, infinitely variable: m/min.20 - 100 Saw band dimensions mm: 4800x34x1,1 Rcsdpfx Aaog Ekttj Iob Working surface height mm: 860 weight kg: 1450 length / depth / height mm: 2650 / 1210 / 1870 Double mitre saw Infinitely variable belt speed hydraulic vice High performance gearbox Hydromechanical saw band tensioning Saw band brush Digital display for mitre angle

Condition: excellent (used), Year of construction: 2014, operating hours: 37,656 h, functionality: fully functional, pressing force: 85 t, filling opening width: 1,500 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 650 kg, overall weight: 25,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2024, volume flow: 410 m³/h, transport width: 2,400 mm, transport length: 9,300 mm, Hello, We are offering you a used baler from the manufacturer Presona AB, type LP 85 VH1, subject to availability. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot guarantee their accuracy or completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours, as of March 2025 Main press force: 85 t Specific press force: 100 N/cm² Pre-press flap force: 28 t Feed chute dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying system: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Press weight: approx. 25 t Note: The machine was used for compaction at a recycling plant. Used for the production of paper, cardboard, films, and plastics such as bottles, buckets, canisters, and drums. The press is in good condition. Many wear parts and entire assemblies have been replaced over the past three years. The machine has been regularly serviced. Rcedpfxsv T I Evj Aa Isb We would be pleased if this press is of interest to you. Your service team at Mertens & Frowein GmbH

Condition: ready for operation (used), Konica Minolta Accurio Press C 3080 with 1.9 million copies----- Tested and ready to work! Equipment: - DF 706 - PF 707 M - HT 506 - FS 532 - IC 605A - SD 513 with CR 501 + TU 503 Option to purchase the machine without the SD 513 module As an experienced retailer of used copiers, we have developed real expertise in packing and pallet shipping to ensure our customers receive machines in perfect condition. Rcsdpfxjyy I Rkj Aa Ieb We ship copiers that originate from and are maintained by Konica Minolta France. If you have any questions, please do not hesitate to ask me. Our company offers the widest range of Konica Minolta production copiers and can arrange worldwide shipping on request. Please do not hesitate to contact us for further information.