3D Printer

Stratasys Objet260

Condition: excellent (used), Objet Stratasys Model: Objet260 Connex 2 Stratasys Objet260 Connex 2 3D Printer + Cleaning Glovebox Computer, Monitor, Software: Objet Studio Ver. 9.2.11.6825 The Objet260 Connex 3D printers from Stratasys are based on PolyJet technology and allow you to combine two or three base resins in a single print run, allowing you to create prototypes from three materials, as well as simulate overmolding or populate build plates with selected models. Using triple-jetting technology, the Objet260 Connex creates prototypes with up to 27 material properties simultaneously in a single part. The device enables high-resolution 16-micron layers for printing complex geometries, smooth surfaces, and thin walls. Model Materials: Psdjv Rw Etopfx Ag Djgw Solid and opaque (VeroWhitePlus, VeroBlackPlus, VeroGray, and VeroBlue) Rubber (Tango family) Transparent (RGD720 and VeroClear) Simulated polypropylene (Endur and Durus) Biocompatible (MED610) Heat-resistant (RGD525) Digital Materials: Digital ABS and Digital ABS2 Wide range of light transmission values Rubber compounds with a range of Shore A hardnesses Simulated polypropylene materials with improved heat resistance Applications: Visual prototypes Functional prototypes Equipment and devices Architectural models Medical models Injection molds Concept models Technical specifications: Build volume: 255 × 252 × 200 mm Layer thickness: Horizontal layers of only 16 µm Resolution: X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 1600 dpi Accuracy: 20 to 85 µm for components smaller than 50 mm; up to 200 µm for the full model size (only for solid materials, depending on geometry, design parameters, and model orientation) Size and weight: 870 × 735 × 1200 mm; 410 kg AC connection: 100–120 VAC, 50–60 Hz, 13.5 A, single-phase Or 200–240 VAC, 50–60 Hz, 7 A, single-phase Condition: used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 1967, power: 21 kW (28.55 HP), * Working width of the cutting unit (cm)175 * Weight without cab (kg)1700 * Grain tank capacity (hl)6.5 Pedpfsvhvf Tox Ag Degw * Type MF30-6 * Serial number 0D7758 * Year of construction 1967 ----Internal vehicle number 8144----Irrors and prior sale reserved

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 270047, Year of construction: 2015, operating hours: 1,514 h, The Stratasys Objet260 Connex 3 is a state-of-the-art 3D printing solution that brings your creative ideas to life. With its advanced technology, it enables the precise production of complex and detailed models and prototypes. A standout feature of this impressive machine is its digital printing mode, which gives you even greater freedom in the design and realization of your projects. The technology of the Stratasys Objet260 Connex 3 is based on the PolyJet process, which delivers high-precision results with exceptional surface quality. It is possible to print models with a layer thickness of 30 µm or 16 µm. This gives you the choice between maximum resolution or maximum speed. In both modes, PolyJet technology allows you to print intricate models with fine details. With a build envelope of 255 x 252 x 200 mm, the Objet260 Connex 3 allows you to create a variety of complex and detailed models in a single print session, saving time and effort. The operation of the Stratasys Objet260 Connex 3 is simple and user-friendly. With the free GrabCAD software, you can easily prepare your models and monitor the printing process. Solid photopolymers in the colors white, black, grey, blue and transparent in 3.6 kg cartridges are available as model materials. The machine can also print flexible and dental model materials. Six material trays are installed and the machine automatically switches from an empty to a full cartridge. This enables even longer unattended printing. With the Connex series' digital print mode, you can also produce complex multi-component and multi-material models. You have the freedom to combine different materials, colors and shore hardnesses in a single model. In the case of the Objet260 Connex 3, you can mix three different model materials. The printer works with the gel-like SUP705 support material. A WaterJet wash-out station is recommended to dissolve this optimally. We can offer you this together with the printer. Podpferrh S Tex Ag Djgw The Stratasys Objet260 Connex 3 can be installed anywhere and does not require any special installation conditions. For detailed information, please refer to the site preparation guide. This printer is part of the Certified Pre-Owned (CPO) program Certified Pre-Owned 3D printers are used 3D printers that have been refurbished and serviced by our experts and then verified by a 24-hour test print. In the case of Objet24, however, we also have some new machines in stock. We offer optimum advice before, during and after the purchase. In addition to our services such as on-site installation and training of your team, we also offer the supply of accessories, spare parts and materials. Sign a maintenance contract with us and benefit from full planning and cost certainty, fast response times and minimized machine downtimes, so you take no risks with your purchase. If you are not yet sure which 3D printing system is right for you, we will be happy to advise you and answer any questions you may have about 3D printing. Request an individual offer today.

Condition: new, functionality: fully functional, rope length: 30,000 mm, rope speed: 47,000 mm/min, machine/vehicle number: HAW1700-EV-Funk, Hydraulic winch for log splitter, crane, mini excavator, tractor, viticulture, horticulture and many other applications. With the hydraulic attached winch, you can facilitate many applications: - Pulling firewood to the log splitter and setting it up - Pull logs onto trailers - Pull out rootstocks and trees - As a winch for backhoes and small excavators - As winch for small tractors and narrow track tractors A sturdy steel construction with 3-sided mounting options (left, right, rear) with 12 threaded holes, this offers many possibilities for mounting the winch (threads are cut and painted.) The winch can also be used as a power winch. They need to be re-tapped with the tap before use because of the rust protection). A 20 m long and 6 mm thick steel cable is mounted. Large pulley for long life of the steel cable. We mount hydraulic motors from 50 to 630 cc (standard = 400 cc). Depending on what speed and traction you need. Maximum working pressure: 225 bar peak Continuous working pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum tractive force: 1700 kg Weight: 49 kg Rope speed: 47 m/min at 60 L/min hydraulic oil Color: red Dimensions: length: 500 mm length with pendulum: 570 mm Width front: 120 mm Width rear: 180 mm Width bearing: + 30 mm Psdsdf Ufpepfx Ag Dogw Width motor: + 200 mm Height: 250 mm The winch is available for mounting or for welding on

Year of construction: 2019, condition: as good as new (ex-display), ex demo HP 3D hardly used plus accessories located near London Pgedpfx Aolgwb Sjg Dew

Condition: new, Hydraulic winch for wood splitters, cranes, mini excavators, tractors, tractors, viticulture, horticulture and many other applications. With the hydraulic winch you can make many applications easier. - Pull the firewood to the log splitter and set it up - pull logs on trailers - Pull out rootstocks and trees - As an attachment winch on back cranes and small excavators - As winch for small tractors and narrow track tractors A robust steel construction with 3-sided screwing possibility (left, right, back) with 12 threaded holes, this offers many possibilities for fastening the winch (threads are cut and painted. They have to be re-cut with a tap before use because of the rust protection). A 20 m long and 6 mm thick steel cable is mounted. Large pulley for long life of the steel cable. We mount hydraulic motors from 50 to 630 ccm (standard = 400 ccm). Depending on which speed and traction you need. Maximum working pressure: 225 bar peak Continuous operating pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum tractive force: 1700 kg Weight: 49 kg rope speed: 47 m/min at 60 L/min hydraulic oil Colour: red Dimensions: Length: 500 mm Length with pendulum: 570 mm width front: 120 mm Width rear: 180 mm bearing width: + 30 mm Motor width: + 200 mm Height: 250 mm Item number: HAW1700 Pgededf Ua Rspfx Ag Dow NOTE: Figure 1 is marked with m

Condition: good (used), For lawn tractors, ride-on mowers, lawn mowers, lawn tractors, mower decks, lawn mowers, cutter bars, disc mowers -Lawnmower blades: 48 pieces Types: different -Package: complete Pedpfx Aob A R Uheg Degw -Price: complete -Weight: 120 kg

Year of construction: 2023, condition: new, * Year of construction 2023 (new unit); * Primary power (PRP) 32 kVA / 26 kW; * Nominal standby power (ESP) 33 kVA / 26 kW; * Rated voltage 400V; * nominal frequency 50Hz; Pgodpfx Agjl Iyyuo Djw * with terminal strip (without sockets outside) * dimensions: 2.225 x 970 x 1.185 mm (LxWxH) - weight, without fuel: 137 kg

Condition: excellent (used), Eos EOSINT plastic laser-sintering system Here we offer an Eos EOSINT plastic laser-sintering system. Eos EOSINT Plastic Laser-Sintering-System P380 The EOS P380 system includes the following Installation space container Powder container Overflow tank Cooler: Termo TEK Termochiller Type: 802-18644-3 Unpacking stamp Removal trolley 3DM 8 zone process chamber heating 250°C Each zone individually adjustable, homogeneous temperature field ± 1°C Kelvin 350mm x 350mm x 610mm Voltage 3/N/PE/ 400V AC Frequency 50 Hz Connected load 8 kW Fuse 32 A MAX. Laser power 100 W Laser class open 4 Laser class Closed 1 Psdpfxeft R Sws Ag Djgw Weight 850 kg Type: EOSINT P 380 condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We can answer further questions for you on the phone.

Condition: used, mileage: 205,880 km, power: 265 kW (360.30 HP), first registration: 05/2008, overall weight: 32,000 kg, fuel type: diesel, axle configuration: 8x4, gearing type: mechanical, emission class: euro4, Year of construction: 2008, LEAF LEAF SUSPENSION Podpfx Aek Sfv Njg Degw Manual transmission 8x4 Technically in order