High-bay warehouse

Stow/SLP/Proman type 16

Condition: ready for operation (used), Year of construction: 2023, Load capacity: 1450/1125kg, load center: 600mm, lift height: 3200/4900mm, battery weight: 300-350kg, free lift: 900mm, mast height lowered: 2100mm, mast height extended: 4900mm, reach: 590mm, ground clearance under mast: 80mm, ground clearance at axle center: 50mm, track width: 1292mm, frame cross-section: 1058mm, front overhang: 655mm, wheelbase: 1120mm, rear overhang: 175mm, side shift: 80mm left / 80mm right, lost load thickness: 880mm, fork tilt back: 3°, fork tilt forward: 3°, min. turning radius: 1350mm, support arm height: 282mm, support arm length: 530mm, maximum speed: 6km/h, gradeability: 5%, battery capacity: 24V/270Ah, fork dimensions: 35x100x1070mm, front wheels (polyurethane): OD 200mm / width 50mm, rear wheel (solid rubber): outer diameter 250mm / width 75mm, AC drive motor: 24V / 2.5kW, AC pump motor: 24V / 5kW, rated power: 2.5kW, width: 1512mm, length: 1950mm, net weight without / with battery: 2800/3150kg, operating hours: 86h. An on-site inspection is possible. Hjdpfx Aew S Tyaoicofk

Condition: new, Year of construction: 2024, functionality: fully functional, Szárítórendszer - 1T 184 TPR Modell, (Mozgatható Szállítószalagos) Hfodsua D U Ijpfx Aicek Kiváló minőségű szárítórendszert kínálunk, mely ideális fafűrészpor, termény, újrahasznosítandó hulladék, ételipari alapanyagok szárítására. A szárítógép teljesen új állapotban van, eredeti csomagolásában.

Condition: good (used), Frames: 8860x1050x80 mm, 34 pieces 3000*1050 mm, 7 pieces Hfedpfx Asd Hbqneicjk Crossbars: 1860*75*45 mm (2800 kg/shelf), 352 pieces 2760*115*40 mm (2400 kg/shelf), 26 pieces 2700*100*50 mm (2400 kg/shelf), 22 pieces Partial quantities can also be purchased. If you require shelves or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelves, as well as accessories, and we will be happy to assist you with your planning. A customized offer tailored to your specific needs is a matter of course for us. Shipping: Please inquire about the shipping costs, providing your postal code and location, as well as the desired quantity of items.

Condition: used, Year of construction: 2009, Dexion Speedlock pallet rack P90 H RA1094 Ideal for your pallet storage needs, the Dexion P90H galvanized pallet rack provides a highly efficient, flexible solution for any need. Product information: - P90 H type upright frame, bolted infill. - Height x depth 8,450 x 1,100 mm. - Post width 90 mm. Beam type SLI 2.700 mm incl. safety pins - Shelf load 1,200 kg with evenly distributed load - floor fixing on site Example: Basic bay length 2,880 mm + add-on add-on bay length 2,790 mm Basic bay consisting of: 2 pcs. upright frame 10 pcs. beams incl. safety pins Extension panel consisting of: 1 pc. upright frame 10 pcs. beams incl. locking pins Technical data: Hodpfxok Aa Dzj Aicsfk Manufacturer: Dexion Frame type: P90 H Beam type: SLI 2700 mm Year of manufacture: 2009 Shelf load: 1200 kg with evenly distributed load Condition: good In case of larger demand, we will be glad to offer you a suitable individual pallet racking solution. Accessories you can ask for, e.g. ram protection corners used 45,00 € (per piece) Delivery information: Pickup possible at any time by appointment. Freight costs can be calculated if the shipping address is given. We deliver ex works, excluding packaging, including loading, without unloading and internal transport. Subject to prior sale. Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: excellent (used), Dexion P90 pallet racking. The racking is in very good condition. We have approximately 30,000 pallet spaces available. Uprights with the following heights: 6000/1100 - 98 euros 7000/1100 - 115 euros 8000/1100 - 130 euros 9000/1100 - 147 euros BX 120/40/13/2700 crossbeam, 2400 kg, 17 euros per piece BX 100/50/15/2700 crossbeam, 2850 kg, 18 euros per piece BX 60/40/13/2700 crossbeam, 900 kg, 14 euros per piece We issue invoices. Hsdpfx Aishq Dd Tjcefk We invite you to cooperate.

Condition: used, Load capacity: 3200 kg/shelf Hfsdpfeg Tmvhox Aicok Crossbars: 3600*140*50 mm 2700*125*50 mm 800 kg/pallet load capacity Frames: 8500*1100*100 mm 7900*1100*120 mm If you require shelving or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelving, as well as accessories, and will be happy to assist you with your planning. Additional accessories available, such as: Frame, corner, and impact protection, push-through guards, chipboard, grating, back panel grating, deep shelf supports. Shipping: Please inquire about shipping costs, providing your postal code and location, as well as the desired quantity of items. Additional service offerings: Planning, shelving installation/dismantling, purchase/sale Changes and errors in technical data, specifications, and prices, as well as sales subject to prior sale!

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard Hfedpfemhhypox Aicek - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: used, STOW storage frames - used - great condition. We have a large number of storage racks from various companies such as MECALUX, STOW, MAGO, BITO, SHAFER,WDX,JUNGHEINRICH,SLP, DEXION,PROMAG etc... with a high load capacity, available, undamaged... The offer concerns the STOW racking frame with height of 805cm - used Commodity code : MTP007165 Height : 805cm Depth : 110cm Post type : PNFB 15 Includes cross and diagonal bracing, Includes post feet. Poles are assembled Bolted truss Hfsdpfx Asv Uzvkjicok Net price : € 109.00 with complete frame. We also have large quantities of used crossbeams in very good condition. * I have large quantities available. * For larger quantities, price negotiations possible. * Transport throughout Europe possible. Location: Chmielów/Tarnobrzeg, Poland

Condition: good (used), Year of construction: 2008, functionality: fully functional, Three knife trimmer automatic with integrated pre stacker Built in 2008 - Color monitor with touchscreen - Infeed conveyor - Right hand infeed - Automatic hopper feeder for inline production - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 Mechanical speed 1,000 to 7,200 cycles/hr Sizes untrimmed Standar Size Maximum 384 x 320mm (15 1/16" x 12 5/8") (Spine length x booI' width) Minimum 140 x 72mm (5 1/2" x 2 13/16") Large size Maximum 445 x 320mm (17 1/2" x 12 5/8") Small size Minimum 110 x 72mm (4 5/16" x 2 13/16") Sizes trimmed Standard Size Maximum 304 x 303mm (12" x 11 7/8") Hjdpfx Aiovdqt Rscofk (Spine length x book width) Minimum 136 x 70mm (5 5/16" x 2 3/4") Large size Maximum 434 x 303mm (17 1/16" x 11 7/8") Small size Minimum 100 x 70mm (3 7/8" x 2 3/4") Book thickness Maximum 80mm (3 1/8") Minimum 2mm (1/16") Ttim Front Maximum 40mm (1 5/8") Minimum 2mm (1/16") Head/Food Maximum 40mm (1 5/8") Minimum 2mm ('/.") Power consumption 20 kVA Compzossed air connection 40 Nm*/h at 6 bar Exhaust 2100 Nm'/h at v = 25 mls Wei ht 5500 (12 125 bs )

Condition: used, 🧰 Product Features • Manufacturer: Palflex • Condition: used • Color: orange • Height: 400 cm • Depth: 110 cm • Field load: 24000 kg • Beam length: 410 cm • Beam load capacity: 3000 kg per level Offer includes: • 11 units of pre-assembled frames, depth 110 cm, height 4 m • 40 units of beams, length 4.1 m, 3000 kg load capacity/bay • 80 units of locking devices • 44 units of concrete anchors • 1 unit of load capacity sign per row of shelving Used corner protectors are immediately available, surcharge per unit: €15.00 net! Further accessories can be found in the accessories catalog. 💰 Price: €2,790.00 net, excluding VAT. • Quantity discount: available upon request • Shipping costs: available upon request, throughout Europe • Delivery time: immediately available • Inspection and collection: possible at any time by appointment We have over 5000 linear meters of pallet racking in stock from numerous manufacturers. (Subject to changes and errors in technical data, specifications and prices, as well as prior sale! See our general terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top storage technology & heavy-duty racking, used & new Description: Are you looking for high-quality storage racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers for new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of storage platforms & steel construction platforms immediately available Hedsvfnqvspfx Aicsfk • 30–50 semi-trailer trucks of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY AFFORDABLY ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving, tire racks or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer storage technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a comprehensive all-round package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete inventory, including complete clearance. 2. Commission auction: Conducting auctions on behalf of customers. Our full service through our own employees: cataloging, office preparation, inspection, goods delivery, logistics, dismantling and complete clearance. Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system, we guarantee the best conditions. Contact us for a non-binding offer!