Diesel Forklift

Still R70-40

Condition: used, functionality: fully functional, Year of construction: 1996, operating hours: 9,240 h, load capacity: 4,000 kg, lifting height: 3,600 mm, fuel type: diesel, mast type: duplex, fork carriage width: 1,600 mm, fork length: 1,200 mm, front tire type: superelastic tires (black), rear tire type: superelastic tires (black), - Device is ready for operation. - New starter battery. Pjdjzp N Tpspfx Agxegp

Condition: used, Radial drilling machine CSEPEL, Type RFh 75 / 1500 Machine no. 13704, Year of manufacture 1985 Drilling capacity in steel: Ø 75 mm Drilling capacity in cast iron: Ø 90 mm Spindle mount: MK 5 Nominal overhang: 1500 mm Maximum overhang of the spindle: 1500 mm (to the column) Minimum overhang of the spindle: 440 mm (to the column) Distance from spindle nose to clamping surface: 370 - 1700 mm Podpfjlhwr Rsx Agxjgp Overarm vertical adjustment: 950 mm Table size / clamping surface: 1800 x 1100 mm Column diameter: 450 mm Quill stroke: 380 mm Spindle speed: 19-1900 rpm, 21 steps Feed rate: 0.047-2 mm/rev, 12 steps Motor power: 11 kW Mains connection: 380 Volts, 50 Hz, 15 kW - Right-hand and left-hand rotation of the drilling spindle via hand lever switch - Hydraulic gear change for spindle speed and feed rate - Hydro-mechanical central clamping device - Motorized overarm vertical adjustment - Without coolant system - Machine light - Operating manual Space required: Length 2720 mm x Width 1170 mm x Height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons Good condition

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 2,778 h, load capacity: 4,000 kg, lifting height: 3,320 mm, fuel type: diesel, gearing type: automatic, Equipment: adjustable boom, cabin, lighting, pallet forks, Still R70-40 with only 2777 operating hours Full cab, low overall height Pgjdpfx Agszcm D Texsp Hydraulic fork adjustment Large tires for off-road use

Condition: used, Technical details: lifting capacity in kg: 6600 kg fork length: 1.500 mm Pgodpfx Aju Nwl Usgxep Lifting height: max. 3.700 mm track width: vorn: 1.800 mm track width: hinten: 1.400 mm axle distance: 2.200 mm voltage: 15 V / Hz Number of working hours: 416,0 (Stand: 28.07.2025) noch in Betrieb h weight approx.: 9.500 kg dimensions L x W x H: 5,2 x 2,0 x 2,8 m - Mast = Duplex design - Fork carriage width max. 1800mm - Load center of gravity: at 600mm = 6,600kg; at 700mm = 6,105kg and at 800mm = 5,685kg - with coupling (pin Ø 40mm) *

Condition: excellent (used), Overall dimensions length 4500 mm width 1900 mm height 1750 mm height of feeder top 860 mm Weight 1100 kg Dimensions of processed raw material height 280 mm width 300 mm length from 500 to 3000 mm Power supply 400 V (3 phase) Feeder feed Pedpfougp Rnox Agxjgp smooth, controlled by inverter speed 4-13 m/min Width of the main belt feeder 200 mm Diameter of pulleys 600 mm Blade parameters length 4000 mm width 30 ÷ 42 mm thickness up to 1,1 mm Raw material pressure spring Setting of cutting thickness manual Throughput per hour up to 3 m3

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 6,533 h, Linde H80T-02/900 LPG Forklift Year of manufacture 2015 Serial number H2X396F51535 Load capacity 8000kg Own weight 16230kg Solid rubber tyres Duplex mast Lifting height 3500mm Working hours 6533h Pgodpfx Aovkn Dtjgxep Power 72kW

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 3431097, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, mount diameter: 120 mm, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 10,000 m/min, feed rate Z-axis: 10,000 m/min, spindle speed (max.): 2,000 rpm, table length: 1,600 mm, table width: 1,200 mm, spindle motor power: 24 W, TECHNICAL SPECIFICATIONS CNC: Siemens 840 C Transverse table travel (X): 2,500 mm Longitudinal column travel (W): 1,200 mm Vertical head travel (Y): 1,500 mm Table size: 1,600 x 1,250 mm Table load capacity: 4 tons Spindle stroke (Z): 600 mm Spindle diameter: 120 mm Spindle taper: ISO 50 Spindle speed: 0 ÷ 2,000 rpm Spindle motor power: 24 kW Feed rates (X; Y; W; Z): 0 ÷ 10,000 mm/min Total weight: 19 tons Year of manufacture: 1997 Complete with: Boring support Pedoyyvq Eepfx Agxogp Various tapers and tools Chip conveyor

Condition: used, Bore diameter: 60 mm Width: 3-5 mm Diameter: 370 – 380 mm Bolt circle: 100 mm - like new or sharpened, Pgedpfx Ajlf I D Ejgxsp - 8 pieces, - suitable for Holzma OPT HPP 350 or similar.

Condition: used, Year of construction: 2013, operating hours: 43,000 h, functionality: fully functional, spindle motor power: 3,700 W, spindle speed (max.): 10,000 rpm, overall weight: 5,000 kg, total width: 1,500 mm, total length: 4,000 mm, total height: 2,400 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 40 m/min, power: 24 kW (32.63 HP), travel distance Z-axis: 205 mm, Equipment: documentation/manual, We are offering one of our machines for sale, as it is being decommissioned due to a scheduled upgrade of our machinery fleet. The machine is a TRAUB TNL 18P sliding headstock lathe, manufactured in 2013, in good technical condition. The reason for the sale is the acquisition of new technology as part of our machinery renewal program. The current operating hours are 43,000. Pgsdpfx Asxdk Ukogxsp The offer also includes an FMB Minimag 20/3200 bar feeder, which ensures smooth and efficient material feed into the machine. As part of the delivery, we can also supply internal equipment, including guide bushings and collets for the main spindle, sub-spindle, and bar feeder, suitable for material diameters up to 12 mm. If you are interested, please feel free to contact me.

Condition: used, functionality: fully functional, Year of construction: 2010, operating hours: 7,643 h, load capacity: 3,000 kg, lifting height: 3,550 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Pedpfey Nt Tvex Agxjgp Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Standard Technical condition: good Front tire type: Superelastic Front tire condition: 0 - 20% Rear tire type: Superelastic Rear tire condition: 0 - 20% Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, windshield, half cab, seat, starts but engine is defective