Walking floor semitrailer

STAS 10.50 "WF 60 FarmStar" 60m³ (Vermietung möglich)

Year of construction: 2002, condition: good (used), functionality: fully functional, doubledeck screen box: 1.000 x 5.000 mm Dodpslxzkkofx Akksuw squared meshes on both screen decks E-motor 4 kW steel-construction and outlet chutes

Condition: new, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, loading space volume: 93 m³, Chassis Dujdpfx Akegcw Rmekow Reinforced continuous chassis design, new body manufactured using a self-supporting construction with corresponding reinforcements in the lower belt for exceptionally high stability and strength, 140 mm high reinforced cross members (for high ground load), additional reinforcement as a gusset plate in the front lower belt/vehicle frame area, chassis made of galvanized steel up to the support structure (semitrailer construction max. 39,000 kg). Axles and Suspension: Disc brake 22.5". Jost (DCA) axle units, 3x9 tons with DCA air suspension, lifting and lowering function, Wabco Smartboard information center, electronic brake wear indicator BVA readable in the central control unit (display), 1st axle with starting aid (new EU regulation, without central control unit option), (optional: 1st and 3rd axles can be lifted via a control). Tires and Wheels 6 wheels with tires size 385/65 R 22.5 according to manufacturer's choice (Br-Go-Co) on steel rims, silver, 11.75x22.5 ET 120. Landing Gears Mechanical landing gears with two speeds, 2x 20 tons support load with swivel foot. Braking System According to E.G. standard, EBS E-system Wabco with RSS system (Roll Stability Support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system. Electrical System According to the guidelines of the EU standards 91/633 and 97/28 with 2 five-chamber lights, type Aspöck Europoint 3 integrated into the aluminum rear panel, 24-volt system with 1x15-pole and 2x7-pole socket, with side marker lights in LED design, 2 reflective panels at the rear, position lights at the front 2x white, rear 2x red, 2 separate LED reversing lights integrated into the U-protection. Body/Dump Body: Body fully welded inside. Reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminum dump body, side walls with 30 mm thick ALU plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, floor designed as a sliding floor system on 140 mm aluminum cross members, floor load capacity approx. 9 tons/m2, cross members mounted closely together (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in a straight design, special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum wing doors 50/30 mm thick with 2 swivel rod locks, attached in the welded aluminum rear frame in Teflon bearings and stainless steel bearings, doors secured in the open position with one chain each on the side. Hard wear plates on the side walls approx. 2,000x1,500x4mm fully welded, sliding rear discharge wall with Kevlar liner approx. 1,800 mm length plus side Kevlar sealing, service door in the front wall with ladder swinging inwards. Hydraulic System: Cargo - Floor Sliding Floor System Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE/HD sliders plus anti-lifting slide bearings, type CF 10 mm floor design, hydraulics with approx. 200 mm working stroke, fixed elements on the front wall, separate possibility for connection of the hydraulic line under the vehicle with fixed elements, line size NW 21, fixed elements with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electrical operation at the rear left with remote control integrated into a l

Condition: new, maximum load weight: 28,320 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, Chassis: Design with continuous chassis, newly manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower belt for particularly high stability and strength, reinforced cross members 140mm high (for high ground load), additional reinforcement as a gusset plate in the front lower belt/vehicle frame area, chassis made of galvanized steel up to the support structure. Axles and Suspension: Disc brake 22.5, Jost (DCA) axle assembly design, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard information center, electronic brake wear indicator BVA readable in the central control unit (display), 1st axle with starting aid (new EC regulation, without central control unit option), (optional, 1st and 3rd axles can be lifted). Tires and Wheels: 6 wheels with tires of size 385/65 R 22.5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75x22.5 ET 120. Kingpin: 2" screwed into a 10mm thick plate. Landing Gear: Mech. support winch with two speeds, 2x 20 tons support load with swivel foot. Braking System: According to EG standard, EBS electronic system Wabco with RSS system (Roll-Stability-Support) and Premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system. Electrical System: According to the guidelines of EG standard 91/633 and 97/28 with 2 five-chamber lights, type Aspöck Europoint, integrated in the aluminum rear panel, 24-volt system with 1x15-pole and 2x7-pole socket, with side marker lights in LED version, 2 reflective panels on the rear, position lights at the front 2x white, rear 2x red, 2 separate halogen reversing lights integrated in the U-profile. Body/Dump Body: Body fully welded inside, reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400 dkn/10,400, aluminum dump body, side walls 30mm thick aluminum plank profiles (2-3 mm) 600mm wide, completely welded with upper and lower belts, plank profiles fully welded inside, floor laid as a sliding floor system on 140mm aluminum cross members, floor load capacity approx. 9 tons/m2, cross members mounted closely together (approx. 350mm), design with special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum wing doors 50/30mm thick with 2 swivel rod locking mechanisms, fastened in the welded aluminum rear frame in Teflon bearings and stainless steel bearings, doors secured in the open position with one chain each on the side, hard wear plates on the side walls approx. 2000x1500x4mm, fully welded, moving residual emptying wall with Kevlar sheeting approx. 1800mm length plus side brushes with Kevlar sheeting seal, service door in the front wall with ladder, folding inwards. Djdsfi Nmwopfx Akkouw Hydraulic System: Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD sliders plus anti-lifting slide bearings, type CF 10mm floor design, hydraulics with approx. 200mm working stroke, fixed points on the front wall, separate possibility for connecting the hydraulic line under the vehicle with fixed points, line size NW 21, fixed points with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric operation behind the left side with remote control integrated in a lockable waterproof box, without hydraulic hoses. Accessories: 6 PVC mudguards with 2 anti-splash mud fla

Condition: used, maximum load weight: 35,000 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 04/2024, next inspection (TÜV): 04/2027, loading space length: 12,213 mm, loading space width: 2,475 mm, loading space height: 2,300 mm, loading space volume: 70 m³, total width: 2,550 mm, total height: 3,856 mm, Year of construction: 2024, Equipment: ABS, STAS 3-axle AGRICULTURAL walking floor SANH 70 cbm First registered 05/ 2024, in new condition Dimensions i.L. (LxWxH) 12,213 x 2,475 x 2,300 mm Volume approx. 70 cbm Empty weight only 7,010 kg Fifth wheel height approx. 1,250 - 1,300 mm Total height approx. 3,850 mm Aluminum short chassis over the axles SAF axles with large disc brakes, 430 mm, reinforced "Off-Road" version Wabco Trailer EBS with RSS stabilization system 1st axle LIFT AXLE 3rd axle self-steering Tires 6-fold 385/65 R 22.5 ALUMINUM drop supports full load (2x 10 t.) 4x LED work lights Cargofloor moving floor agricultural version with 15 boards 6 mm smooth End caps aluminum welded RADIO remote control Side wall panels complete welded (grain version) rear portal support pivots at the top hydraulic connections at the top and also at the bottom of the support legs roof crossbar reinforced version, galvanized Dusdpfxsv Dz Ixj Akkow integrated grain discharge funnel at the rear, outlet opening downwards, operation from the side RENTING is the new BUYING, also available from us as a full-service rental-----

Condition: used, Year of construction: 1994, Drying chamber / Recirculating air drying chamber / Wood drying chamber / Drying system Mühlböck QLSF External dimensions: Length: 10.3 meters Width: 4.2 meters Height: 4.15 meters Internal dimensions: Length: 10.1 meters Dusdpfx Akoy Tt Easkjw Width: 3.01 meters Height: 4.0 meters Technical data: Year of manufacture: 1994 Inlet temperature: 95 degrees Fans: 7 x 0.75 kW Immediately available Location: Austria, near Ried im Innkreis

Condition: used, Year of construction: 2010, functionality: fully functional, cooling capacity: 172.5 kW (234.53 HP), type of input current: three-phase, overall weight: 481 kg, input voltage: 400 V, Equipment: type plate available, Güntner table-top recooler with two fans. Description as per the attached data sheet. Multiple units available! Dujdpfey Dipcsx Akkew

Condition: new, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, loading space volume: 87 m³, Chassis Manufactured using a self-supporting aluminum design with appropriate reinforcements in the lower belt for exceptionally high stability and strength. Subframe made of aluminum, 140 mm frame height (max. 39 tons), axles and suspension: disc brakes 22.5", Jost axle assemblies, 3 x 9 tons with DC air suspension, lifting and lowering function, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the central control unit (without central control unit equipment), 1st and 3rd axles can be lifted separately with start-assist function (without central control unit equipment), 3rd axle additionally equipped with Optiturn, ECAS air suspension. Dodpfx Aksgcw Riokjuw Tires and Wheels 6 wheels with tires size 385/65 R 22.5, manufacturer's choice, on Alcoa aluminum rims, satin finish, 11.75x22.5 ET 120 (with steel rims + approx. 120 kg). Kingpin Aluminum landing gear, manufacturer: Alu-Leg, 2 x 10 tons support load, swivel feet used for air suspension. Braking System According to E.E.G. standard, two-circuit braking system, EBS E system Wabco with RSS system (Roll Stability Support), spring-loaded brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator. Electrical System According to STVZO guidelines with 2 five-chamber lights, type Aspöck Europoint III, integrated in the aluminum rear panel, 24-volt system with 1 x 15-pin and 2 x 7-pin socket, with side outline lights in LED design, 2 work lights at the rear, 2 LED work lights on the side at the height of the kingpin, 1 LED work light inside at the front left, operable from the outside. Body/Container "Body fully welded inside" Front wall load 17,250 dkn, rear and side walls 10,250/13,400 dkn, aluminum container, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, completely welded with lower and upper belt, plank profiles fully welded inside! Floor designed as a sliding floor system on 140 mm aluminum cross members, floor load capacity approx. 7 tons/m2, cross members mounted closely together (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in a straight design, special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum wing doors, 50/30 mm thick with 4 swivel rod locks, mounted in a welded aluminum rear frame in Teflon and stainless steel bearings, running aluminum wall suspended in the reinforced aluminum upper belt with "Kevlar liner" for complete unloading, lateral brush seal and additional Kevlar liner on the side, integrated discharge chute with folding cover plate in the floor closure, operable from the outside, left rear, viewing window at the rear left, 1 sample slide in the rear doors, i.e. 2 pieces, service door on the left in the front wall. Hydraulic System "Cargo Floor" 24 plank system - smooth design! Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD gliders, approx. 8 mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed brackets on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed brackets, line size NW 21, fixed brackets with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded in the floor, actuation at the rear left with cable operation in a lockable, waterproof box, or hydraulic hoses. Accessories PVC mudguards with rubber splash guards, aluminu

Year of construction: 1950, condition: like new (used), Max working width 400mm 3 knife shaft Djdsh Rfxmspfx Akkjuw The length of the tops is 2500mm 3kW engine Power supply 400V Cast iron

Condition: used, maximum load weight: 29,278 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2018, next inspection (TÜV): 10/2026, loading space length: 10,030 mm, loading space width: 2,450 mm, loading space height: 3,800 mm, loading space volume: 61 m³, total width: 2,550 mm, total height: 3,800 mm, Equipment: ABS, Knapen K200 moving floor 61m³ with rotary airlock Dedpox Hb N Hsfx Akkeuw * SAF axles with air suspension and disc brakes * 1st axle as lift axle * Alcoa aluminum rims * 385/65 R22.5 tires * Roof roll tarp * Grain slides in left and right rear doors * Work platform on front wall * 4x work lights * Remote control * Jost landing legs * Stainless steel toolboxes * 6 mm floor * Heitling rotary airlock For further information, please do not hesitate to contact us.

Condition: new, empty load weight: 6,550 kg, maximum load weight: 29,450 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,613 mm, loading space width: 2,490 mm, loading space height: 2,300 mm, total length: 25,500 mm, total width: 39,960 mm, total height: 140,000 mm, suspension: air, tire size: 385/65 R 22,5, wheelbase: 6,250 mm, Year of construction: 2025, front tire size: 385/65 R 22,5, rear tire size: 385/65 R 22,5, emission class: none, Axle manufacturer SAF, aluminum chassis, color gray, air suspension with lift function, raising and lowering, lift axle on 1st and 3rd axle, disc brakes, fixed side underrun guard, toolbox, 2x LED reversing spotlights, 4x side LED reversing spotlights (2 each on the landing gear + 2 behind the axle assembly), 1x LED spotlight in the cargo area, broom and shovel holders mounted on the left-side underrun guard (in direction of travel), Cargofloor control type CF 500 SL-C - E"-CONTROL 6 mm with additional plastic guides under the floor profiles, swing doors (half/half with horizontal locking bar), radio remote control, rear door crash protection – aluminum buffer running the full width of the rear wall, hoop and tarpaulin, front left service flap, working platform with ladder, PVC rolling tarpaulin (Panama quality, 900g/m²), cargo securing certificate DIN EN 12642 Code XL, production date 5/2025, grain hopper/sluice with central discharge at the rear and dust bag, immediately available. Dsdsxac Dpopfx Akkouw