Steel construction platform 2-storey 3000 m² STOW

Stahlbaubühne 2-stöckig 3000 m² STOW L 58,5 m B 54,6 m Auflast 500 kg/m²

Condition: like new (used), Year of construction: 2020, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, total height: 3,000 mm, total width: 2,400 mm, total length: 6,000 mm, energy consumption: 35 kWh, Equipment: documentation/manual, Vacuum Evaporator – 57,000 L/Day | Industrial Wastewater and Process Water Treatment General Description The vacuum evaporator offered here (57,000 L/day) originates from a project for the treatment of process water and fermentation residues in a biogas producer consortium in southern France. The plant was fully installed but never commissioned and is in as-new, factory-preserved condition. It is immediately available. The evaporator is designed as a thermally efficient vacuum system and serves for the volume reduction, concentration, and recovery of water-containing liquid wastes. In combination with downstream reverse osmosis, it is ideal for applications requiring both clean distillate and highly concentrated nutrient or brine solutions. Technical Data (Evaporator 57,000) Type: Vacuum evaporator, thermally heated Manufacturer: Blue Water Plant Year of manufacture: 2020 Prsdewnbxdepfx Ag Djd Capacity: 57,000 L/day (approx. 2,400 L/h) Operating pressure: < 0.2 bar (vacuum mode) Heating medium: Hot water / steam Material: Stainless steel AISI 316 / 304 Control system: Siemens S7-1200 PLC with touch panel Energy consumption: approx. 45–55 kWh/m³ (depending on feed water) Condition: As new, factory preserved, unused Fields of Application • Biogas and digestate treatment – recovery of nitrogen concentrates • Landfill leachate treatment – reduction of wastewater volume • Chemical & pharmaceutical industry – process water treatment • Food industry – cleaning and reuse of rinse and process water • ZLD systems (Zero Liquid Discharge) – final stage concentrate evaporation Advantages • High thermal efficiency through vacuum operation • Robust stainless steel construction (AISI 316) for aggressive media • Fully automatic control (Siemens S7 + touch HMI) • Low maintenance, long-life components • Ideally compatible with RO systems (double pass integration) • Immediately available – optional refurbishment, acceptance testing & 1-year warranty Special Features • System was part of an integrated plant with SIMPEC RO 8000 44 8 • Never in operation, fully documented and preserved • Location: Southern France (dismantling & transport by RIEFILT GmbH can be arranged) Price & Scope of Delivery Price: On request Scope of supply: Evaporator 57,000 + control system + documentation Optional: Refurbishment / Factory acceptance / 1-year warranty RIEFILT GmbH – Industrial Water Solutions

Condition: new, functionality: fully functional, power: 18.8 kW (25.56 HP), fuel type: diesel, fuel tank capacity: 14 l, color: orange, overall weight: 1,400 kg, emission class: euro5, shovel volume: 0.03 m³, Year of construction: 2025, operating hours: 1 h, Equipment: pallet forks, rubber tracks, standard shovel, Mini Excavator VIP14 on Rubber Tracks The modern mini excavator VIP14 is a professional and durable machine. The VIP14 model is the ideal machine for demanding construction, electrical, plumbing, renovation companies as well as service providers in similar sectors. The VIP14 is also equipped with a swing arm, which makes work on tight construction sites significantly easier. We also offer reliable customer service after the purchase. The mini excavators are manufactured under the supervision of European technicians. The machine is built on a robust frame and can be used under all conditions. TECHNICAL DATA: Model: VIP14 Own weight: 1400 kg Bucket volume (3 buckets in set): 0.04 m³ Engine: LAIDONG Engine power: 18.8 kW Number of cylinders: 3 Oil cooler: YES Swing arm: YES Extendable tracks: NO Max. climbing ability: 58 % Pump type: gear pump Hydraulic pressure: 20 MPa Hydraulic flow: 36 l/min Max. travel speed: 2.5 km/h Platform rotation speed: 12–13 rpm Bucket digging force: 16 kN Arm digging force: 12.5 kN Ground pressure: 23 kPa Fuel tank: 14.5 l Hydraulic tank: 15 l Engine oil volume: 3.2 l Support rollers (per side): 3 DIMENSIONS: Length: 3319 mm Width: 1100 mm Height: 2292 mm Blade width: 1100 mm Blade height: 220 mm Track contact surface: 1190 mm Track width: 230 mm Ground clearance: 380 mm Bucket width (standard): 400 mm Total track length: 1503 mm Track model: 230x72x45 WORKING AREA: Max. digging depth: 2258 / 2495 mm (with quick coupler) Max. digging radius: 3417 mm Max. digging height: 2840 mm FEATURES AND ADVANTAGES OF THE PRODUCT - Special design to separate engine compartment and cooling system, and reinforced fan for improved cooling efficiency Pjdpfx Ajvznl Esg Derd - Hydraulic components from renowned brands for stable and reliable performance - Dual fuel filter ensures high fuel purity and effective engine protection - Extended hydraulic system enables connection of various attachments - Comfortable operator cabin with wide, clear field of view facilitates work - Korean joystick for precise and pleasant control Versatile applications: gardening, orchards, agriculture, basement renovations, waste transport in coal processing plants, paper industry, etc. – replaces the work of 4–5 people PRICE: €11,008.4 net €13,100 gross

Condition: excellent (used), Year of construction: 2023, operating hours: 1,851 h, functionality: fully functional, pressing force: 70 t, filling opening width: 1,100 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 500 kg, overall weight: 17,000 kg, oil tank capacity: 70 l, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410 BS-22/50 Year of construction 2023 Pump operation hours 1,851 hours, as of July 24 Press power main press 70 t (a 70 tonne hydraulic cylinder is installed, special equipment) Specific press force 90,9 N/cm² (a 70 tonne hydraulic cylinder is installed, special equipment) Feed channel 1,400 x 1,000 mm Theoretic cycle time 13 sec Theoretic throughput capacity 266 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 22 kW Connected load 65 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 5,5 t/h bulk weight of 50 kg/cbm approx. 7,5 t/h bulk weight of 100 kg/cbm approx. 9,7 t/h Bale weight with a bale length of approx. 1.2 m up to 500 kg, depends on material SPS controller Siemens S7-1500 Operating panel Schneider Harmony Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 17 t Special equipment: Wear-resistant floor made of HARDOX steel Larger main hydraulic cylinder with 70 tonnes of pressing force Special press ram for pressing loose bulk materials with small grain sizes OptiCut XS system for lower cutting forces and higher throughput rates Special pressing piston for pressing "difficult" materials Technical data for the conveyor belt: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Deutschland Type KGF GB 1500 Year of construction 2023 Drive power 4.0 kW Belt speed approx. 0.3 m/second Length feeding conveyor 2,679 mm Length elevating conveyor 6,866 mm Length goose neck 1,272 mm Grade 35° Effecting width 1,400 mm Side wall height 800 mm Carrier height 50 mm Carrier distance 750 mm Belt quality EP 400/3, 3:1 (DIN quality N) Overall height 4,515 mm Overall transport dimensions11,148 x 2,502 mm (l x w) Technical data on the non-contact personal protection system: Manufacturer BOREMA Umwelttechnik AG, Switzerland Type APSS iBOR 22 Year of construction 2023 Condition of the press system: The entire system is in very good condition due to the short operating time of only 1,851 pump hours and the processing of only paper, cardboard and film. Scope of delivery: Avermann baler, type AVOS 1410 BS-22/50, incl. wire drawing stations and bale chute Avermann conveyor belt, type KGF GB 1500 BOREMA personal protection system, type APSS iBOR 22 Comments: Podpeu Thbxefx Ag Derd The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: ready for operation (used), Model: HSM V-Press 1160 Plus Baler Pressing force (kN): 532 Output (bales/h): 1–2 Max. bale size (mm): 1200x1100x1000–1200 Dimensions (L x W x H) (mm): 1780x1150x2985 Power (kW): 7.5 Predpfx Agera Nyuj Djd Year 2007–2008 price €5,500 year 2009–2010 price €5,800 year 2011–2013 price €6,300 We also offer HSM V-Press 1160 Max balers, year 2014–2015 Weight (kg): 2,300 ALSO AVAILABLE: 2017–2018 models – €7,500

Year of construction: 2008, operating hours: 40,000 h, condition: good (used), machine/vehicle number: HBC 140 2x75kW 2008 (00191), Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Construction year: 2008 Hardox bottom floor plate only Variable channel pressure control Plastic valve Hydraulic pump driven by frequency inverter Anti-rat cabling Oil in-depth filtration Modem Hours 40.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Prjdjkcgf Hjpfx Ag Dsd Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Condition: good (used), diesel engine, propulsion engine, marine diesel, injection pump, fuel pump, fuel injection pump, diesel generator, diesel generator Prsdpsivfgfefx Ag Djd -Manufacturer: Bosch, injection pump from generator MWM RHS 518V16 -Injection pump: Bosch EP/RSUV300-750P9/332/1R PE8P120/520RS190 -Feed pump: Bosch FP/K 22 P11 -Shaft: Ø20 - 25mm / M18x1.5 -Individual components: see photos -Dimensions: 1000/170/H290 mm -Weight: 41 kg

Condition: excellent (used), Equipment: type plate available, Mobile tank systems for A1-A3 (KC diesel, KA gasoline/diesel and collection tanks), - double-walled, - 250 liters - 1000 liters, Pjdpfsgx E N Ijx Ag Djrd - partly with IBC approval, - 12V/ 24V/ or 230V pumps as required, - Automatic tap valve, - vertical or horizontal design, - partly with lockable pump covers, - on request with flow meter with daily and total counter, - all systems with new DEKRA inspection Loading and transport can be organized. Only serious and serious inquiries will be answered: Name, e-mail address and telephone number.

Condition: used, Saimp KS Iron Lathe. Max piece length 1000mm Predev Sth Hjpfx Ag Dsd

Condition: used, bore capacity in steel (diameter) 60 mm throat 400 mm total power requirement 4,4 kW weight of the machine ca. 1,7 t Predpswftt Iofx Ag Ded

Condition: new, Optimum OPTIdrill D 23Pro (400 V) special offer set bench drill 3003020SET With V-belt drive. TECHNICAL DATA Dimensions and weights Length (product) approx. 680mm Column diameter 73mm Width/depth (product) approx. 350mm Height (product) approx. 1015mm Weight (net) approx. 63.5kg Drilling capacity Drilling capacity steel (S235JR) 25mm Continuous drilling capacity steel (S235JR) 20mm Drilling table Drilling table work surface length 280mm Drilling table work surface width 245mm Drilling table T-slot size 12mm Drilling table rotation 360 Drilling table inclination 45° Distance spindle - drilling table max. 425mm Speed range Speed range 200 - 2440min¯¹ Number of speed ranges 12 Electrical data Drive motor power 0.75kW Supply voltage 400V Mains frequency 50Hz Machine base Distance spindle - machine base max. 618mm Machine foot working surface length 240mm Machine foot working surface width 250mm Machine foot T-slot size 16mm Machine foot T-slots quantity 2 Machine foot T-slot distance 170mm Spindle Quill stroke 80mm Spindle holder MK2 throat 180mm SCOPE OF DELIVERY Pjdjt N Ivvjpfx Ag Dsrd Quick-action drill chuck 1 - 16 mm Morse taper MK 2/B16 T-nuts Machine vice BMP