Crane rope Ø 9 mm 26 m

Stahl Drallarm

Condition: good (used), Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 10 mm -Length: 9.5 m -for electric cable winch Itjdpfx Amjghnbwoljf -other crane ropes are also available Price: per roll -Quantity: 7 rolls available -Weight: 4 kg/piece

Condition: used, Year of construction: 2007, operating hours: 27,000 h, functionality: fully functional, A used mobile scrap shear is being offered for sale. The machine can be inspected at any time. Ijdpfxeykzv Ho Amlotf

Condition: used, Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 6 mm -Length: approx. 33 m -for: electric wire rope hoist -Also other crane ropes available -Price: per roll -Number: 4x available Iodpfx Asghnd Domletf -Weight: 6 kg

Condition: good (used), Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 12 mm -Length: approx. 26 m -for electric cable winch -other crane ropes are also available -Weight: 15 kg Itodpfx Amsb A S Ihslof

Condition: excellent (used), Year of construction: 2014, operating hours: 37,656 h, functionality: fully functional, pressing force: 85 t, filling opening width: 1,500 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 650 kg, overall weight: 25,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2024, volume flow: 410 m³/h, transport width: 2,400 mm, transport length: 9,300 mm, Hello, We are offering you a used baler from the manufacturer Presona AB, type LP 85 VH1, subject to availability. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot guarantee their accuracy or completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours, as of March 2025 Main press force: 85 t Specific press force: 100 N/cm² Pre-press flap force: 28 t Feed chute dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying system: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Press weight: approx. 25 t Note: The machine was used for compaction at a recycling plant. Used for the production of paper, cardboard, films, and plastics such as bottles, buckets, canisters, and drums. The press is in good condition. Many wear parts and entire assemblies have been replaced over the past three years. The machine has been regularly serviced. We would be pleased if this press is of interest to you. Isdpfsv T I Evex Amlotf Your service team at Mertens & Frowein GmbH

Condition: good (used), Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 15 mm Itsdpfob A S Iyox Amlef -Length: approx. 25 m -for electric cable winch -other crane ropes are also available -Weight: 24 kg

Condition: used, Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 9 mm Itsdpfx Ameghiggeljf -Length: 24 m -for: electric wire rope hoist -Also other crane ropes: available -Weight: 6.5 kg

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned Ijdpfsx Dnb Usx Amletf • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see our video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: used, Winch rope, crane rope, hoist rope, wire rope Itjdpfxeghihwo Amlsf -Wire rope: Ø 10 mm -Length: 24.7 m -for: electric wire rope hoist -Also other crane ropes: available -Price: per piece -Number: 2 pieces -Weight: 8.9 kg/piece

Condition: used, Winch rope, crane rope, hoist rope, wire rope Ijdpfx Amjghiiijletf -Wire rope: Ø 9 mm -Length: 22.5 m -for: electric wire rope hoist -Also other crane ropes: available -Weight: 6.1 kg

Condition: excellent (used), Year of construction: 2004, operating hours: 34,480 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 19,000 kg, transport height: 3,300 mm, oil tank capacity: 750 l, power: 45 kW (61.18 HP), Technical data baler: Manufacturer Bollegraaf Typ HBK 100 Year of construction 2004 Hours of operation 34,480 hours Iedpfxoxbgnho Amlstf Press power main press 100 tons Press power of pre-press max. 42 tons Feed channel 1,600 x 1,100 mm Filling volume 3.15 m³ Theoretic cycle time 22 sec. Theoretic throughput capacity up to 450 m³/hour Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical, fully automatic Throughput rate at a bulk weight of 30 kg/cbm approx. 13 tons/hour bulk weight of 50 kg/cbm approx. 20 tons/hour bulk weight of 100 kg/cbm approx. 30 tons/hour Throughput rate with ruffler approx. 20 tons/hour Bale weight 550 up to 750 kg, depends on material Volume hydraulic oil tank 750 l SPS controller Telemecanique TSX Micro Transport dimensions only baler 10,900 x 2,320 x 3,300 mm (l x w x h) Machine weight baler approx. 19 tons Comments: Unlike the standard HBC press series from Bollegraaf, this machine does not have a pre-press flap but cuts the material between blades on the press ram and the counter blade in the frame. This makes it a cutting edge press, similar to a Paal, unoTech, etc. The press is in very good condition for its age, as it was used exclusively for compressing paper from document destruction. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 9 mm -Length: 36.6 m -for: electric wire rope hoist -Also other crane ropes: available -Weight: 9.9 kg Itsdpjghih Tjfx Amlof

Condition: good (used), Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 12 mm -Length: approx. 31 m -for electric cable winch -other crane ropes are also available -Weight: 23 kg Iodpfxsb A S Iae Amletf

Condition: used, Taps for pipe thread Before and finished Schneider R 2 3/4 inch Itododk Rdvopfx Amlof

Condition: used, Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 7 mm Isdsghidlspfx Amljtf -Length: 19.7 m -for: electric wire rope hoist -Also other crane ropes: available -Weight: 4.15 kg