Screw compressor

SPECIAL PRICE Mark Compressors and Dryer RMD 45 IVR G7 + DX100

Condition: used, machine/vehicle number: 008018, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Gjdpfx Aaewv Dfcjyoca Corner Rounding Unit: yes Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 007134, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 10 nr Gcsdpfot Hmtzjx Aayea

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 3 - 12 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS open TS Feeding speed (adjustable) m/min 4 - 20 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (2 x Kw 3) Glueing Unit (Hot Melt Glue) 283.1513 Band Pressure zone Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit 08.415 (2 x Kw 0,66) Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (2 x Kw 0,66) servo Profile edge scraping unit 08.519 Glue scraping unit 08.50 Buffing unit 08.612 (2 x Kw 0,25) Free space Gcodpod Nuu Hsfx Aayea

Condition: used, Holz Her STREAMER 1054 FÜ + PU Edge thickness 0.4 - 6 mm Modern control with selector switch for adjusting the units Gcodjxu E Nwepfx Aaysa Pre-milling unit for attaching before the gluing part Fully automatic edge magazine for rolls and strips Glue application station GLU-JET cartridges + PU gluing Glue application using nozzle technology Workpiece height 6-60 mm Automatic glue height adjustment High-quality 3-roller printing unit, 1st roller motorized Cutting unit pneumatic. for rolls and strips up to 6 mm edge thickness with pneumatic adjustment of 0-10° bevel of the mitre saws pneumatic milling unit, flush milling 6 mm, radius milling - chamfer milling - 15°, pneumatic via control panel scraper unit for chamfers and radii with 2 scraper holders pneumatic engagement and disengagement surface scraper unit - finish spraying device - PU machine is WORKSHOP REFURBISHED in TOP CONDITION

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Gcedpfx Aevvkfdjayoa

Condition: like new (used), Year of construction: 2019, I sell the edge banding machine Biesse JADE 240 Year 2019. Special offer: Machine almost NEW !! Configuration: Entry fence manual adjustable Premilling pneumatic adjustable Edge banding manual adjustable / 2 glue tanks for EVA glue Pressure zone manual adjustable End cutting saw pneumatic adjustable Tilting radius milling manual adjustable Corner rounding unit 2-motor manual adjustable Radius scrapers manual adjustable Glue scrapers pneumatic adjustable Polishing brushes Separation fluid spraying front Central lubrication system Top feeding rolls Height adjustment manual Material height 10-60 mm Edge thickness 0,4-8,0 mm Feeding speed 12 m/min. Gcjdpfsxncrvsx Aayoa Only 9250 meters edgebanded. Machine almost NEW !! CE Mark. Including full documentation and CDs. Very good condition ! Available immediately !

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Storage location: Nattheim Gcsdpfx Ajvvkfwsayja

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Features and technical data: - Control system with LCD display - Swiveling operator panel - Program memory - Manual pressure bridge adjustment - Feed via transport chain - Extendable workpiece support Jointing unit 1961: - 2 x 2.0 kW - Diamond jointing cutters for up-cut and down-cut operation Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - Automatic feeding of coil and strip material Adhesive application system 1906: - Cartridge system with sensor-controlled nozzle - Automatic reloading - Use of PUR adhesives possible Pressure unit 1816: - With powered roller - Pneumatic control of the pressure unit End trimming unit 1918: - 2 x 0.22 kW - Swivels from 0 to 10°, pneumatically adjustable Milling unit 1942 MOT 2: - For flush, radius, and chamfer milling - Motorized adjustment - Air nozzle at milling unit Corner copying unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius scraper unit 1929 MOT 2: - For plastic edging up to 3 mm - Chip collection box for radius scraper Surface scraper 1964: - Process-controlled surface scraper - Air nozzle at surface scraper Buffing unit 1940 Edge thickness, coil material: 3 mm Edge thickness, strip material: 5 mm Max. edge thickness, corner copying: 3 mm Workpiece thickness: 6-45 mm Workpiece thickness, corner copying: 45 mm Min. workpiece length: 180 mm Feed speed: 8 m/min Distance, workpiece support: 470 mm Support plate diameter for edge material: 800 mm End trimming blade for coil material up to: 3 mm Heating up time: 3.5 min Jointing cutter power: 2 x 2 kW End saw power: 2 x 0.22 kW Milling station power: 2 x 0.6 kW Godswka Nyepfx Aayeca Corner copying power: 0.22 kW Extraction nozzle jointing unit: 120 mm Extraction nozzle milling unit: 70 mm Extraction nozzle scraper unit: 70 mm Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Availability: short notice

Condition: new, power: 18 kW (24.47 HP), gearing type: mechanical, fuel type: diesel, color: blue, overall weight: 1,810 kg, total length: 2,895 mm, empty load weight: 1,300 kg, maximum load weight: 510 kg, suspension: other, number of seats: 1, Equipment: all wheel drive, differential lock, Power steering, diesel, all-wheel drive, 18.2 kW, 1,319 cm³, hydrostatic transmission, 3-cylinder, 20 km/h, differential lock, power steering, 1 seat, analog fuel gauge, rear swiveling work lights, 2 front weights at 15 kg each, roll bar with beacon, cross-ply tires front: 6.0-12, rear 8.30-20, overall length 2,895 mm, weight 1,300 kg, permissible total weight 1,810 kg. Turf tires available for an extra charge of €500.00 net. FOR US, CONDITION AND FEELING ARE DECISIVE; PRICE IS SECONDARY. For further questions, please contact Mr. Faller by phone. EXCHANGE, TRADE-IN, OR FINANCING OF YOUR VEHICLE POSSIBLE. All details provided without guarantee. For more offers, visit our homepage. The description and data provided do not constitute a warranty and are not binding. The only binding agreement is the purchase contract signed at our dealership. Subject to errors and prior sale! Gjdpfx Aajwtpvzjysca

Condition: new, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, Automatic Grinding Machine for Band Saws – ISELI BAP110 Gcjdpfxjv Tltdj Aayea The ISELI BAP110 is a state-of-the-art, fully automatic grinding machine for band saw blades, engineered to meet the highest standards in precision, efficiency, and operator convenience. Thanks to its automated grinding process, the BAP110 ensures consistent, high-quality processing of saw teeth with minimal manpower required. 🔹 Fully automatic operation 🔹 Precisely adjustable tooth shape and pitch 🔹 Flexible use for various band saw blades 🔹 Intuitive controls with a user-friendly interface This machine is particularly suitable for sawmills and grinding workshops that value consistently high cutting quality and optimized throughput times.