Loading platform

SOLIDE 2 Axle open box trailer

Condition: excellent (used), 16 shank mills with indexable inserts Hedpfedx D Tvex Apnjfi Manufacturer: Walter Weight: 9.5 kg

Year of construction: 1979, condition: used, throat: 22/29 mm drive motor: bei 380 V ca. 0,55 kW Hfodpfezif Ssx Apnsi space needed: 450 x 500 x 560 mm weight: ca. 6,5 kg pressure power: 30 kN

Condition: good (used), Make: Ursviken Type: VPF 1000/800-5,0 Control: Siemens Simatic panel Year: 1970 Hydraulic press for fabrication off large componts like dish heads tanks boiler shipyard and steelconstruction Renewed in 2015 with Siemens SIMATIC panel and E-Cabinet Rittal Build in height 2950 mm Maximum die height 1500 mm Movable Table & Piston in X-Ways Large package Die tooling radius 10/20/30/50/60/80/100 Pressing force 210 kg/cm2 Maximum stroke 800 mm Machine 2350 mm placed in ground Specifications Metric US Standard Capacity Kg 1000 Ton Distance between column 5010 mm Table Length 3000 mm Table Width Hfedpfokvmi Ssx Apnsi 2000 mm Table Height 550 mm Ram stroke 1450 mm Approche speed 50 mm/min. Working speed 5 mm/min. Return speed 50 mm/min. Dimensions (Estimate) Length 0 mm Width 0 mm Height 0 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: as good as new (ex-display), MIG/MAG welding machine with inverter technology. Three-phase power supply, welding machine. Master Software TERRA PME included. Technical data Power Supply: Hedpfsw Rm Sasx Apnsfi Voltage (50/60 Hz): 3x400V ±15% Maximum input power: 22.9 kVA Maximum input current: 31.1 A Power factor PF: 0.73 Efficiency: 89% Slow-blow fuse: 25 A Open-circuit voltage: 61Vdc IP protection class: IP23S Insulation class: H Power cable: 4x3mm² – 5 m Welding: Setting range: 3–400A Duty cycle MIG/MAG at 40°C: 40% – 400A, 100% – 330A Duty cycle MIG/MAG at 25°C: 100% – 400A Wire diameter: 1.0–1.2 mm (optional 0.6–1.6 mm) Flux-cored wire diameter: 0.9–2.4 mm Aluminum wire diameter: 0.8–1.6 mm Wire feed speed: 0.5–22.0 m/min Wire spool diameter: Ø 200/300 mm Remote control connection: yes

Condition: excellent (used), I sell plasma cutter hypertherm powermax 800 d very good condition. /////Price listed for 1 pc ///// Plasma cutter Hypertherm Powermax 800 Hfsdpfxsulc Ixe Apnoi Plasma cutter description The Powermax800 plasma cutting system uses an inverter power supply to provide a smooth DC output voltage for superior cutting and gouging of mild steel, stainless steel, aluminum and other metals. The Powermax800's power supply provides a constant output current that varies from 20 to 50 amps, providing optimal performance for all metal thicknesses up to 1/2 inch (12 mm). At 50 amps, the Powermax800 can cut metals up to 3/4 inch (20 mm) thick and cut metals up to 1 inch (25 mm) thick.

Condition: good (used), Various press brake tools, punches, dies Hfsdpfx Asw Emf Dopnoi Bending length 2500 + 3050 mm Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 18 h, Powerful mini dumper in top condition for sale! The machine is in very good condition and ready for immediate use. Condition: Used, very good Operating hours: 17h Year of manufacture: 2024 SCHORR tracked dumper RR500DHKAS PRO – Discover the advantages: - 9.2 HP four-stroke engine - Self-propelled and powerful chain drive - Hydraulic bucket for self-loading - 500 kg payload - Large and high-quality tipping trough with a wide tipping angle - Foldable rider platform as standard - 6+2 gears The SCHORR tracked dumper RR500DHKAS features a hydraulic tipping drive and a payload of 500 kg, as well as a powerful 9.2 HP single-cylinder 4-stroke gasoline engine. The special feature of the RR500DHKAS is its hydraulically controlled bucket. With the help of the so-called "self-loader," you no longer need a separate shovel. Thanks to its slim design (740 mm), the mini dumper can even drive through narrow paths and narrow doorways. The mini dumper's powerful track drive allows you to easily negotiate rough terrain, inclines, and curbs. The rubber tracks provide secure footing in any work area. Raising and lowering the dumper/box is effortless and requires little effort thanks to the hydraulic tipping drive, even when fully loaded. Another advantage of the wheelbarrow is its extra-large hydraulic oil tank with oil filter. With a robust dumper made of thick sheet metal and a straight outlet that ensures quick and easy drainage, this dumper is a must-have for anyone who needs to transport heavy loads. Tipping on slight inclines is also no problem. The large tipping angle ensures that even fully loaded dumpers are completely emptied without you having to manually assist. TECHNICAL DATA: - Manufacturer: SCHORR - Manufacturer's type designation: RR500 - Model: DHKAS - Load capacity: 500 kg - Tilt drive: Hydraulic (infinitely variable) - Drive: Chain - Weight without/with packaging: 353 / 373 kg Drive - Engine: Air-cooled single-cylinder four-stroke engine (OHV) Hfjdowh I Sdepfx Apnoi - Starter: Recoil starter - Power: 9.2 hp - Transmission: 6 forward gears / 2 reverse gears - Speed - Forward gear: max. 8 km/h - Reverse gear: max. 5 km/h Basic dimensions: - Total length of platform folded: 2350 mm - Total length of platform unfolded: 2550 mm - Total width (including bucket): 740 mm - Total height: 1050 mm - Container dimensions (internal dimensions): 740 x 665 x 435mm - Container dimensions (external dimensions): 1060 x 710 x 520mm - Track width: 710mm - Loading volume (liquid): ~ 200L - Loading volume (heaped): up to 370L (depending on load) - Drive chain dimensions: 180 x 60 x 38mm - Packaging dimensions: 1890 x 870 x 1220mm Filling height: - Side: 810mm - Front: 580mm PROFESSIONAL DUMPER WITH BUCKET The mini dumper relieves you of the arduous burden of having to move heavy wheelbarrows by hand. The attached, hydraulically controlled bucket also helps with this. SMOOTH-RUNNING AND ROBUST The mini dumper features a robust 6-speed transmission with two reverse gears. The dumper also features four eyelets for secure attachment during transport. We at SCHORR are happy to answer any questions you may have about our pallet trucks. You can reach our competent team by phone or email. We look forward to hearing from you and providing advice.

Condition: good (used), Year of construction: 1995, roller (top) diameter: 330 mm, sheet thickness (max.): 23 mm, Manufacturer: IMCAR Type: SIHR Year of manufacture: 1995 Extended end for profile bending rolls (Pipe & T-Angle) Central lubrication Digital readout position side rolls Fully hydraulic machine Hydraulic drop end Hardened rolls Specifications Metric US Standard Roll width: 3100 mm Sheet thickness at 3 x top roll Ø: 18 mm Sheet thickness at 5 x top roll Ø: 23 mm Sheet thickness for initial bending: 20 mm Top roll Ø: 330 mm Side roll Ø: 310 mm Number of rolls: 3 Bending speed: 0 - 5 Side roll adjustment: 200 mm/min. Number of driven rolls: 2 Power: 15 kW Dimensions (estimated) Length: 5250 mm Hjdpfxjwpku Do Apnefi Width: 1700 mm Height: 1700 mm Weight: 11900 kg Please note: The information on this page has been provided to the best of our knowledge, and wherever possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contractual terms. We recommend you check all critical details.

Condition: good (used), functionality: fully functional, pressing force: 300 t, total length: 1,200 mm, total width: 2,800 mm, total height: 3,500 mm, ID105830 Hydraulic press Brand: Van De Graaf Type: HVK-300 Capacity: 300 tons Hsdowhc H Aspfx Apnofi

Condition: used, Technical details: diameter: 600 mm passage: 250 mm width: 100 mm revolution per minute: 500 U/min weight of the machine approx.: 175 kg 3-jaw chuck with internal jaws Hfsdpfou N Ez Djx Apnei flange Ø 730 x 10mm (pitch circle bore Ø 680mm) 1 set of external jaws 1x chuck key *