Vibrating table - automatic jogger

Polar RA-2

Condition: used, Year of construction: 1995, functionality: limited functionality, 2 x POLAR RA 2 jogger with air removal. Machine are for spare parts, one of the units is possible to fix. Machines without any damage only electrical problems. Knsdpswn Dcfefx Aa Eof Price LOT Denmark for 2 x units euro 1500.00

Condition: excellent (used), Year of construction: 2008, overall weight: 1,195 kg, volume flow: 7.25 m³/h, operating pressure: 13 bar, input voltage: 400 V, ATLAS COPCO GA 37 VSD ff screw compressor Variable speed, (inverter) With refrigerant dryer 37 kW motor Capacity 7.25 m3/min Pressure 13 bar Knedpfjt Hdh Nsx Aa Eef Mileage 13200 hours The compressor is fully functional.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Year of production: 2005 Manufacturer: GUK-Falzmaschinen Griesser & Kunzmann GmbH & Co. KG Machine availability – on request; Machine in use; possibility to carry out work tests during inspections; Good technical condition; Folding machine manufactured by the renowned German company GUK equipped with a high pile feeder (sheet picking with a suction roller from above) FL2-50, 2 folding pockets aggregates, pocket with maximum working widths of 50 cm and mobile chute delivery. Folding machine GUK model FA 50/6-6 FL2-50 – infeed width 500 mm (6+6 folding pockets). Maximum input format: 500 x 850 mm Minimum input format: Kjdpfx Aajrx S Iws Ejnf 105 x 145 mm Minimum folding length: 45 mm Feed rate of sheets from feeder: 40 - 180 m/min Maximum performance: 27.000/from sheet A4 Power supply: 400 V/50 Hz Machine equipment: High pile feeder FL2-50; Batch counter. Multifunction counter programming the operation of the machine. Ability to fold sheets in groups (lots) of the given number in each lot, with stepless adjustment of the spacing between parties. I. folding unit FA 50/6, 6 folding pockets; Sound reduction hood, top. II. folding unit FA 50/6, 6 folding pockets Sound reduction hood, top. Mobile chute delivery S 520. To be added after I or II folding station.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Automatic folding and creasing machine with suction sheet feeder. Excellent condition. Knjdpfx Aoxdm Imja Eof

Condition: excellent (used), Year of construction: 2016, operating hours: 27 h, SBL 1060 SE Year: 2016 Sheet feeder: Manual non-stop pile feeder Material range: Paper and board from 470 × 350 mm to 1060 × 760 mm Max cutting format: 1050 × 740 mm Min sheet size: 470 × 350 mm Max sheet size: 1060 × 760 mm Max cutting pressure: 300 tons Material thickness: 0.1 – 2 mm (corrugated/laminated max 4 mm) Min gripper margin: 9.5 mm Max inside chase size: 1155 × 852 mm Cutting plate size: 1076 × 756 mm Max speed: 8,000 sheets/hour Power consumption: Total 32 kW (22 kW + 10 kW for lower plate heating) Machine dimensions (L×W×H): 5,900 × 5,700 × 2,615 mm Max pile height – feeder (with pallet): 1,750 mm Max pile height – delivery (with pallet): 1,450 mm Feeder Section - Pneumatic feeder table - Non-stop manual feeder system - Anti-static system - Pre-pile device - Manual suction group adjustment - Micrometric suction adjustment - Motorized side pile adjustment - Suction belt feeder table - High-pressure lubrication pump - 2 pneumatic side register guides Knsdpfxjwypp Ie Aa Eef - Electronic control of front and side register Cutting/Embossing Section - Automatic pressure adjustment up to 300 tons - Preparation and introduction table for die frames in platen - 2 quick-lock die chase frames with bottom plate - Pneumatic locking of the chase and lower supporting plate - Centerline System - Micrometric system - Heated lower support plate (24 mm) - Cutting plate: 4 mm - Compensation plate: 3 mm - Archiveable 1 mm thin cutting plate Stripping Section - Quick lock for upper and central stripper frames - 2 standard upper stripper frames - 2 standard lower stripper frames - Double accessory kit for lower stripper prep (pins, bars, clamps, etc.) Delivery Section - High-pile automatic non-stop delivery with conveyor - Guillotine for automatic removal of gripper margin waste - Sheet deceleration device - Tab insertion device

Year of construction: 2020, condition: new, Semi-automatic carton former - Starbox 65 - Connecting Robotape-Starbox 65 - Set of 4 swivel castors with brake Kjdpof Evh Tjfx Aa Ejnf Sample photos - machine is still in original packaging

Condition: good (used), Year of construction 1997 Very good condition Uses wires on spools with diameters from 1/4” to 1” for a maximum binding thickness of 24 mm. Knedpfx Aaeumxa He Eof Maximum binding length: 420 mm. Minimum binding length: 50 mm. Each diameter uses dedicated binding tools. Machine speed is over 1500 cycles per hour.

Condition: excellent (used), functionality: fully functional, stack height: 100 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 140 kg, Professional Double Corner rounding machine, Kedpsv T S Ubjfx Aa Ejnf solid construction, weight 14kg, easy to adjust, cut two corners in one pass, geared brake motor, 3 phase 400V. Machine is in a very good working condition.

Condition: excellent (used), Year of construction: 2018, operating hours: 7,800,000 h, functionality: fully functional, Horizon AFC-566-F combination folding machine year 2018 counter approx. 7.5 mil flat pile feeder 6 buckle plates cross folding knife Knedjxdl T Uspfx Aa Eof MKU-38 mobile cross folder, turnable stream delivery excellent condition

Condition: used, Späneförderband / Waste Conveyor Busch KF 110-80 HF 35 Baujahr / Year 2000 Förderhöhe / Conveying height 1100mm Schüttlänge / Length of delivery chute 800mm Fördergeschwindigkeit bei 50Hz / Conveying speed with 50Hz 0,40m7s Gewicht / Weight 94kgs Waste Conveyors on Saddle-Stitchers, Perfect Binders, Three-Knife Trimmers Knjdpfxjvkuqme Aa Eef Späneförderbänder an Sammelheftern, Klebebindern, Dreischneidern Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test