Freezing Bag, 10-30ml, "Standard" Tube

Origen Biomedical CS50S CryoStore 50 EVA

Condition: used, Year of construction: 2020, machine/vehicle number: 031EP-2020, Lg.no. 24558 Technical data: - Abrasive diameter 150 mm - Sanding unit swivels on articulated arm - Swivel radius of sanding arm 2000 mm - Motorized dust extraction - Infinitely variable disc speed - 800 - 2200 rpm - Table dimensions 1500 x 880 mm - table height approx. 920 mm - Drive 400 V / 3.6 kW - Space requirement approx. W 1600 x H 1600 x D 1600 mm Blsdpsvazz Dofx Afkok - Weight approx. 250 kg

Condition: used, Year of construction: 1994, cutting diameter 520 mm saw band length 7239 mm cutting width 1,3 mm Control POSIMOD cutting range - square - 520 x 520 mm feed length 500 mm feed length: multiple 4500 mm min. cut-off length 6 mm length of rest piece min/max 10 / 100 mm cutting speed 20 - 130 m/min dimensions of saw-band 7239 x 50 x 1,3 mm sawing motor 5,5 kW Blodpowm Rm Isfx Afkok total power requirement 10,0 kW weight of the machine ca. 3,8 t dimensions of machine L x W x H 3,42 x 2,30 x 2,40 m - 2 column guided - Accessories: roller track 2500 mm length, chip conveyor, coolant

Year of construction: 2012, condition: excellent (used), Alfa Laval Centrifugal pump Type LKH 85/240, 25,0 kW , Bjdpfshck S Eox Afkjlk Stainless Steel. Used! Good condition! Inlet: 6" - Outlet: 6"

Condition: refurbished (used), Year of construction: 2011, Used automatic hydraulic bandsaw for metal MEP SHARK 332 NC EVO Blade dimensions: 3320x27x0.9mm Mitre angle: from 45° to +60° Operating modes: manual, semi-automatic dynamic, semi-automatic, automatic Cutting speed: 15-100m/min (inverter) Cutting capacity: at 0° - round 300mm - square 260mm - rectangle 330x260mm Dimensions: 2600x2320x2000mm Bjdeul Svljpfx Afkslk Year of manufacture: 2011 Weight: 1050kg The machine is fully refurbished and tested.

Condition: excellent (used), Year of construction: 2007, Universal Milling Machine, gear type, feed range X/Y/Z 500/350/400 mm, table size 800x400 mm, rotary / tilting table 600x300 mm, motor 3 KW, 18 speeds 40-2000 rpm., ISO 40, quill travel 60 mm, boring capacity Ø 40 mm, digital readout on 3 axis, automatic and rapid feeds, horizontal milling head, collant systen, halogen lamp, + round- / tilting table, dimensions 1500x1700x1750 mm, weight ca. 2200 kg; ex demonstration machine Bledpfx Asfvci Ejfkjk

Condition: as good as new (ex-display), All parts from picture come with machine. Bljdpsgrafkjfx Afkjk

Condition: like new (used), Autoclaves are used for the sterilization of packaged products that need to reach high temperatures (+100ºC) for the elimination or inactivation of pathogenic microorganisms. Static autoclaves: these are suitable for any format and are used for food packaged in cans, jars and other flexible materials. CHARACTERISTICS: * Forced ventilation *Shower system. * Temperature and time recorder. CONSUMPTIONS: - Steam: Maximum flow rate 2100 kg/h. Approximate consumption 475 kg/cycle. - Electrical energy in KW: 22kw Bedex S Ipwspfx Afkelk - Cold water in tn/hr: Flow rate 25m³/h. - Compressed air in m³/min. The theoretical required to cool the autoclave in the worst air requirement condition (empty or with low load) is 2.91 m³/minute. - Total amount of drainage in ton/day: Depends on the number of cycles. Approximately 0.8 m3/cycle will be drained from inside the autoclave at the end of the cycle. The water output of the exchanger will be the same as the water input during cooling, 25 m³/h. - Total raw water consumption in tn/day: 0.8 m³/cycle final + 12-16 m³ cooling.

Condition: excellent (used), Year of construction: 2000, Programmable and automatic machine for the production of sheet metal panels by forming multiple bends on all four sides. Bjdpfx Ajw A Nnpjfkolk

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you according to customer requirements. Bedpfjtmqi Dox Afkslk The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Year of construction: 2014, condition: ready for operation (used), A Lissmac steel brushing and deburring machine is available. Passage width: 1500mm, max. sheet thickness: 20mm, medium: brushing block, machine dimensions X/Y/Z: approx. 3100mm/1400mm/1800mm, weight: approx. 2300kg. Documentation available. On-site inspection is possible. Bodpfx Afewi Tntskslk