Electric 4-wheel forklift

Noblelift FE4P80N

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, load capacity: 8,000 kg, lifting height: 4,500 mm, free lift: 1,268 mm, fuel type: electric, mast type: triplex, construction height: 2,570 mm, fork length: 1,200 mm, empty load weight: 10,299 kg, total length: 3,192 mm, drive type: Elektro, construction width: 1,870 mm, Electric 4-wheel forklift Load center: 600 ISO class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Triplex Transmission: Electromechanical Condition: New Technical condition: New Front tire type: Non-marking Front tire size: 355/65-15 Rear tire type: Non-marking Rear tire size: 250-15 Lodpezhc Idefx Aanshl Battery voltage: 80V Battery Ah: 412Ah Battery manufacturer: Noblelift Battery type: Lithium-ion Battery year of manufacture: 2026 Description: In addition to this unit, we offer other forklifts and warehouse equipment. Our equipment is workshop and FEM4.004 tested. Please contact us by email or by phone. You can also find us at hsr-gabelstapler. Of course, we also buy your used equipment, even if you do not purchase a vehicle from us. Lease purchase and financing at favorable terms are available upon request. We will be happy to provide you with competent and detailed advice on our vehicles. Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, load guard, full cabin, full free lift, CE certificate, safety light, safety pilot, non-marking tires, interior mirror, exterior mirror, joystick, rotating beacon, windshield wiper, single pedal control, LED, seat.

Condition: like new (used), Year of construction: 2016, operating hours: 390 h, functionality: fully functional, type of input current: three-phase, overall weight: 827 kg, Carrier water chiller Model: 30RBS-140B0181-ME, year 2016, R410A. 135 kW (116,100 frigories), cooling only, maximum consumption: 61 kW. Dimensions: 2258x2050x1330 mm, plate heat exchanger, weight: 827 kg. Machines fully tested in our warehouse with gas, inspection possible. Reference: 1137. Lhjdpfjyfwuzox Aanel

Condition: excellent (used), functionality: fully functional, machine/vehicle number: W1V9106231P325397, mileage: 155,956 km, power: 105 kW (142.76 HP), first registration: 04/2021, fuel type: diesel, axle configuration: 2 axles, color: white, gearing type: mechanical, number of seats: 2, Year of construction: 2021, number of previous owners: 1, Equipment: ABS, air conditioning, airbag, car registration, central locking, electronic stability program (ESP), immobilizer system, onboard computer, power assisted steering, sliding door, soot filter, summer tires, traction control, Good day and thank you for your interest in our vehicles. For sale is a Sprinter that has been used as a service vehicle. Considering its age and mileage, the vehicle is in very good, well-maintained condition. Please do not hesitate to contact us if you have any questions. Ledow Dbymopfx Aanehl WE SPEAK ENGLISH

Year of construction: 2011, operating hours: 13,600 h, condition: excellent (used), functionality: fully functional, Technical data: BOBST VISIONFOIL 104 Max. sheet format: 1,040 × 740 mm Min. sheet format: 400 × 350 mm Max. embossing/hot foil stamping area: 1,010 × 702 mm Lhsdpfozt Idujx Aanol Production speed: up to 7,500 sheets/hour Embossing force: up to 2.6 MN (286 US tons) Foil unwinders/web advance shafts: 2 standard Foil width: 25–1,020 mm Max. roll diameter: 250 mm Heating temperature: 20–160 °C Heating zones: 12, individually adjustable Paper: from 80 g/m² Cardboard/solid board: up to 2,000 g/m² Corrugated board: up to 4 mm Machine length: approx. 6.50 m Machine width: approx. 6.00 m Machine height: approx. 2.20 m 4 honeycomb plates Foundation exchange table (third-party product) Machine raised by 300 mm Machine is equipped with a foil braking brush (not visible in the video) or, if equipped with extraction/tube cutter, with a funnel system! High-performance machine for stable foil transport, even at high speeds and with long foil unwinders! Extremely short setup times for sheet processing and foil unwinding! Not a Chinese copy or a Bobst BMA replica! Machine has only 14,000 hours of operation! Condition very good! Bobst platen conditioning performed (die service) 5/26 Can be inspected at any time during production, and is encouraged! Available from December/January 2026/27 Videos available upon request via WhatsApp! Direct sale to a production company preferred! No dealer options will be offered! A package deal with a Bobst 102E2 is also possible (also with an exchange table and honeycomb foundation for blind embossing)!

Condition: ready for operation (used), Year of construction: 2009, operating hours: 1,000 h, spindle speed (max.): 2,600 rpm, travel distance X-axis: 360 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 980 mm, spindle motor power: 22,000 W, overall weight: 7,000 kg, controller manufacturer: SIEMENS, controller model: 840D Solution Line, number of axes: 4, This 4-axis SPINNER TC800 was manufactured in 2009. It features a radial turret and is equipped with Siemens control, ensuring reliable operation. With approximately 1,000 operating hours, this machine has been barely used. If you are looking to get high-quality turning capabilities, consider the SPINNER TC800 horizontal turning machine we have for sale. Contact us for further details. • Control: Siemens 840D Solution Line • Rapid traverse X-axis: approx. 18 m/min • Rapid traverse Z-axis: approx. 24 m/min • Main spindle speed: up to approx. 4000 rpm • Main spindle power: approx. 24 kW (100%) • Main spindle power: approx. 33 kW (40%) • Spindle nose: A11 • Bar capacity: approx. 77 mm • Counter spindle: Yes • Counter spindle speed: up to approx. 5000 rpm • Counter spindle power: approx. 15 kW • Counter spindle spindle nose: A6 • Counter spindle bar capacity: approx. 52 mm • Tool turret type: VDI 50 • Number of tool stations: 12 • Driven tools: Yes • Number of driven tools: up to 12 • Driven tool speed: up to approx. 4000 rpm • Maximum turning diameter: approx. 500 mm • Maximum swing over bed: approx. 800 mm • Maximum turning length: approx. 800 mm • Tailstock: Yes • Tailstock taper: MK4 • Tailstock stroke: approx. 100 mm • Tailstock force: approx. 8500 N • Voltage: 400 V • Frequency: 50/60 Hz • Control voltage: 24 V DC • Compressed air pressure: approx. 6–10 bar • Hydraulic pressure: approx. 70 bar • Chip conveyor: Yes • Coolant system: Yes • Hydraulic unit: Yes Lhjdoyv Epvopfx Aanjl • Electrical cabinet: Yes • Radial turret • No quill • Barely used, approximately 1,000 operating hours Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, functionality: fully functional, operating hours: 3,443 h, CLARK FORKLIFT LOAD CAPACITY: 50 Q. Lodpewtffxofx Aanjhl DIESEL NEW FORKS LENGTH: 1.80 MT. ORIGINAL FORKS LENGTH: 1.20 MT. (ALWAYS SUPPLIED) NEW SEAT WITH ELBOW REST MAX. LIFTING HEIGHT: 4.80 MT. WORKING HOURS: 3,443 SERVICE CARRIED OUT IN MAY 2025 READY FOR DELIVERY

Condition: good (used), Year of construction: 2008, functionality: fully functional, Three knife trimmer automatic with integrated pre stacker Built in 2008 - Color monitor with touchscreen - Infeed conveyor - Right hand infeed - Automatic hopper feeder for inline production - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 Mechanical speed 1,000 to 7,200 cycles/hr Sizes untrimmed Standar Size Maximum 384 x 320mm (15 1/16" x 12 5/8") Lodpjvdqt Refx Aanehl (Spine length x booI' width) Minimum 140 x 72mm (5 1/2" x 2 13/16") Large size Maximum 445 x 320mm (17 1/2" x 12 5/8") Small size Minimum 110 x 72mm (4 5/16" x 2 13/16") Sizes trimmed Standard Size Maximum 304 x 303mm (12" x 11 7/8") (Spine length x book width) Minimum 136 x 70mm (5 5/16" x 2 3/4") Large size Maximum 434 x 303mm (17 1/16" x 11 7/8") Small size Minimum 100 x 70mm (3 7/8" x 2 3/4") Book thickness Maximum 80mm (3 1/8") Minimum 2mm (1/16") Ttim Front Maximum 40mm (1 5/8") Minimum 2mm (1/16") Head/Food Maximum 40mm (1 5/8") Minimum 2mm ('/.") Power consumption 20 kVA Compzossed air connection 40 Nm*/h at 6 bar Exhaust 2100 Nm'/h at v = 25 mls Wei ht 5500 (12 125 bs )

Condition: excellent (used), Year of construction: 2010, Horizon BQ-270 with only 436,453 books on the counter Specifications Maximum paper length: 320 cm Maximum paper width: 310 cm Minimum paper length: 135 cm Minimum paper width: 115 cm Number of clamps: 1 Speed (books per hour): 500 Lhodpfx Aaoygx T Isnsl ----- Length x Width x Height: 2,720.0 × 910.0 × 1,545.0 mm Weight: 900 kg

Condition: used, CNC 5-Axis HMC – Horizontal Machining Center, Milling Center, Manufacturing Center Manufacturer: LICON Model: Liflex 1266 PC B1 Year of construction: 2016, Commissioned: 2017 Equipped with SIEMENS 840D SL (Solution Line) CNC path control, with 5 simultaneously controlled axes Travel paths X: 1200 mm, Y: 660 mm, Z: 650 mm A-axis as swivel bridge +/– 135° (270°) B-axis 360° continuous Axis acceleration X + Y-axis 6 m/s² Axis acceleration Z-axis 9 m/s² Feed force X + Y-axis 7500 N Feed force Z-axis 10000 N Positioning tolerance (X/Y/Z) 0.008 mm A-axis swivel speed 180° rotation in 4 sec. Ljdpfet Ac Efex Aanohl Interference diameter on the swivel bridge max. 1400 mm Transport load on the swivel bridge max. 700 kg Tool holder HSK 63 Spindle speed max. 12,000 rpm, stepless Spindle power 37kW at 40% duty cycle Spindle torque at 40% duty cycle 85 Nm Maximum spindle torque 100 Nm Tool change time (chip-to-chip) approx. 3.7 sec. Tool diameter with adjacent slots occupied Ø 140 mm Tool diameter with adjacent slots free Ø 250 mm Maximum tool length 400 mm Maximum tool weight 20 kg Power supply 400 Volt, 50 Hz Connected load 80 kVA Compressed air connection 5-8 bar - LIFLEX MSP 80/63/85/12,000 motor spindle (output 37kW/40% duty cycle) with liquid cooling and recooling unit - 2-axis rotary tilting table LICON as B- and C-axis, with hydraulic axis clamping - Zero-point clamping system on the swivel axis turntable - Dual pallet changer, without pallets (these need to be newly sourced) - Media transfer of 5 single-action pressure lines for oil or air, for workpiece clamping on the pallets Hydraulic functions from 30-150 bar, with pressure monitoring (controllable via M-functions) - Tool changer with 30 tool positions, disc turret type - Machine designed for dry machining with minimal quantity lubrication (MQL) system - MQL-TSC, internal MQL lubrication supply through the spindle - Scraper belt chip conveyor, discharge height 1150 mm - Licon ECO-Mode (energy-efficient aggregate operation) - Direct linear measurement system on all axes - Operating hours (control voltage on) ≈ 7,500 h Space required for operation L x W x H 9,000 x 5,000 x 3,800 mm Space required for transport L x W x H 6,100 x 4,400 x 3,600 mm Base machine weight approx. 21 tons Total weight: approx. 24 tons Very good condition

Year of construction: 2005, condition: ready for operation (used), Travel X/Y/Z: 2500mm/900mm/800mm, speed: 18000rpm, spindle power: 35kW, max. table load: 3000kg, tool places: 30, machine dimensions X/Y/Z: approx. 6500mm/3000mm/3000mm, weight: approx. 20000kg, control: Siemens Sinumerik 840D, operating hours: 55730h, spindle hours: 18696h. Z-axis brake defective, roller shutter in machine room defective, screen cable defective. Including cooling lubrication system Knoll VRF 250/1250, documentation available. On-site inspection is possible. Lsdpfx Ajvamqdjanohl