Mortise and Foiling

Mueller Martini 6252 Onyx & 6270 Safir II

Year of construction: 2006, condition: used, Gaemmeler KL 540 Compensating Stacker with attached blocking device VM 500 The compensating stacker KL 540 is equipped with the proven Gaemmerler LiftPack technology. The KL 540 is suitable for bundle heights up to 300 mm. Nummerous options allow to meet the individual customer requirements. Condition: cleaned and ready for production Technical Data: Cycle time ≥ 1,5 sec. (depending on the copy) ≥ 1,2 sec. with Servo pusher (depending on the copy ) Pagination 4 – 96 Heatset / Gravure Formats A 105 – 330 mm (with rear-eject 105 – 310 mm) Kjdsh Nrh Uspfx Aa Esnf B 140 – 500 mm D max. 560 mm Layer height max. 200 mm Bundle height max. 300 mm Weight: 1.500 kg approx. Gaemmerler VM500 blocking unit Cycle time: (approx. 6.7 sec) per pack with a pack height of 300 mm and a blocking time of 2 sec. The cycle time per pack increases when the blocking time is increased and the pack height is reduced. The cycle time is also strongly influenced by the output speed of the compensating stacker and thus by the product (surface, format). Sizes: Width: 140 to 500 mm - 5.5" to 19.7" Length: 105 to 330 mm - 4.13" to 13" Pile height: 55 to 400mm - 2.16 to 15.7" Inlet height: 890 mm - 35" Outlet height: 890 mm - 35" Connected load: 16A (2KW, 380/480 Volt, 3 phases, neutral) Air requirement: 1000 standard l/min, 6 bar; unoiled, dry air Weight: approx. 500 kg

Year of construction: 1993, condition: used, Size max 470 x 320 mm Size 152 x 127 mm Speed max 18.000 c/h Pile height 235 mm Knjdpfx Aec Rntnsa Esf Pile height pre-loading cage 124 mm

Condition: used, Year of construction: 2016, machine/vehicle number: 1037516, Faltschachtelklebemaschine / Folder Gluer Lamina 1800GL WSYear 2016 - 1037516 Manual fed in-line folding, gluing and taping machine Format min. 70mm - max. 1800mm Nordson hotmelt Gluing Unit - 2 gluing hedas Speed 0-40 m/min PLC control with touch screenThe Lamina Gluer is a manual fed in-line folding, gluing and taping machine. By the genius construction it is able to handle various sizes of different materials. The tool free set-up allows a quick change over even for short runs. Options for the machine include cold glue, back support unit, tape applicator etc. Ksdpsq Rx Srjfx Aa Eonf Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 2022, condition: new, Suction belt with two suction belts Vacuum individually adjustable Speed ​​up to 160m / min Infinitely variable speed Knodpfx Aajch Hcao Esf Height adjustable also available with other lengths Inkjet base

Year of construction: 1997, condition: ready for operation (used), Built in 1997 Size max 370 x 370 mm min 100 x 100 mm Kedpedxtlxefx Aa Eonf Speed max 100 c/min Weight 250 kg (approx.)

Condition: excellent (used), functionality: fully functional, stack height: 100 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 140 kg, Professional Double Corner rounding machine, Kjdpev T S Ubsfx Aa Esnf solid construction, weight 14kg, easy to adjust, cut two corners in one pass, geared brake motor, 3 phase 400V. Machine is in a very good working condition.

Condition: used, Tenoning spindle 1 St. Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig, PC-Nexus # 2774 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and completely checked before delivery ----- Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3 kW > Radial adjustment path pneumatically controlled to 8 positions, e.g. for edge rounding from above > Laser aiming light for detecting the saw section Item 2: Rounding unit horizontal below ----- > Position: horizontal below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length 25 mm > Spindle speed: 9,000 rpm > Max. tool flight circle: 130 mm > Axial adjustment path mechanically coupled with Crosscut saw > Adjustment path radial pneumatically controlled on/off Length stop NC controlled ----- > Length 3500 mm Knedpfxsvu Hghs Aa Ejf > Electronic length stop Item 3: Tenon and slot spindle ----- > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 3500 rpm > Tool flight circle max. 320 mm > Spindle diameter: 50 mm > Tool diameter max.: 320 mm > Motor power: 11 kW Item 4: 1. Profiling spindle (same and opposite rotation) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 7.5 kW Item 5: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers axially pneumatic opposite the spindle controlled, 2 positions Rung guide consisting of: Guide ruler in the stop (area of ??the synchronous spindle), Rung support bar from above in the area of ??the profile milling unit vertically on the right and profiling spindle. Pos. 6: Profile milling unit horizontal top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??9,000 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions > Radial adjustment range 125 mm, 8 positions Pos. 7: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions > Radial adjustment range 110 mm, 8-way turret > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 210 mm > Motor power: 3.0 kW Item 8: Profile milling unit/grooving unit from below ----- > Motor power: 3.0 kW > Tool clamping length: 125 mm > Axial adjustment range 100 mm, 8 positions > Radial adjustment range 1...

Year of construction: 2001, condition: ready for operation (used), Built in 2001 Size min 102 x 152 x 7 mm max 320 x 470 x 64 mm Kedsdyky Tjpfx Aa Eonf Speed max up to 15.000 Prod./h Table height 876 mm

Year of construction: 1998, condition: like new (used), Round pile feeder, first folding unit TD78/4-1 4 pockets, second unit TD66/4-2,4 pockets, 3 unit knife Stahl EF63 (1984), SBP 80 press delivery, no pump machine was on in house air supply Kodpfjd Tnxljx Aa Esnf

Condition: like new (used), Year of construction: 2004, WEINIG UNIMAT SUPER 4 planer – German production - very good condition – year of production 2004 – DTR TECHNICAL PARAMETERS: planing width 150 mm planing height 50 mm spindle diameter 40 mm equipped with tools upper adjustable head 1) lower head 11 kW 6000 rpm 2) upper head 18.5 kW 7000 rpm 3) lower head 5.5 kW 6000 rpm feed motor 2.2 kW feed adjustable on the inverter 0-18 m/min feed on cardan shafts pneumatic clamp three upper steel-plated pulling rollers one rubber top roller grooved top pre-top length 1950 mm total power 37 kW central lubrication Ksdjin Nrgepfx Aa Ejnf Transport dimensions: length/width/height 320x220x220 cm weight ~ 2700 kg